Email attachment size limit?

I noticed today that when I attach a photo from my external hard drive to an email on my Macbook Pro, the attachment drops in size significantly. I want to attach a photo that is 800kb but it shows up in the email as being 142kb. Why is this? How can I keep the attachment at its original size?

Your ISP sets the limit. Speak to them and get the max attachment size.

Similar Messages

  • Limit the email attachment size XI

    Hi All ,
    I am working on a requirement . I did an extensive search on this(SAP Notes, SDN and on the system itself) but couldnu2019t find any such functionality provided by SAP.
    1.  CCMS configuration for the ability to check emails being sent out of Sap that exceed a certain threshold i.e. 5+MB for an attachment.
    The only thing that I could figure out was that we can limit the email attachment size (SAP Note 837300) but this is not what is required.
    Wanted to check , whether someone is aware of any such functionality. It would be really helpful.
    Thanking in anticipation.
    Warm Regards
    Amit

    Thanks Michael .
    Anything I can can do with the payload size in XI .
    I can get the payload size from sxmb_moni tcode. Can I generate alerts based on payload size ,again I am aware that we can limit the size of the payload ,but can we generate something based on payload size.
    Thanks
    Regards
    Amit
    Edited by: Amit Bangotra on Feb 2, 2010 12:44 PM
    Edited by: Amit Bangotra on Feb 2, 2010 12:53 PM

  • Why is there a maximum email attachment size?

    I can understand why there is a maximum MMS file message size but why is there a maximum email attachment size set by the handset? The limit is preventing me sending pictures from my phone. MMS messages are charged at a flat rate but GPRS data is chared per kB. My operator, Tmobile, say they have no limit on email message sizes (and obviously they make more money if you send a larger file. If I transfer my sim card to my laptop or PDA I am able to send any size of attachment with no problem. But with the sim back in the handset a limit of 100kB is imposed. I get the same result using both Tmobile or Orange sims. This is especially annoying if you have a phone that produces high quality images with file sizes several times the limit. You can have a great image with no means of sending it at its original resolution. Anyone know why this is?

    Most operator's (carrier's) MMSC (Multimedia Messaging Service Center) servers do set a limit.
    What the MMS size limit that's guaranteed to go through is defined by a document known as the MMS Conformance Document (maintained by OMA, Open Mobile Alliance, which is a standardization organization by mobile device manufacturers and network operators, primarily).
    So, both the handsets (phones) may or may not have a size limit depending on how it was designed, and in addition the networks also have their own limits, and they do not need to be the same, but the doc I mentioned specifies what the devices and networks have to support, at least.
    More on OMA (and you can try to find the MMS Conformance Doc, if you wish):
    http://www.openmobilealliance.org

  • Maximum email attachment size

    Hi
    Does the iphone have a maximum email attachment size that it can download?
    I am not on about the limit imposed by your email service provider.
    Thanks Chris

    No size limit per se. However, the iPhone seems to have difficulty displaying large attachments. For example, Gmail's limit is 10 MB. If I send myself a 9.5 MB powerpoint file, it downloads just fine on the iPhone, but when I try to open the file, it fails.

  • ICloud Attachment Size Limit

    I just paid for iCloud without confirming whether or not there was an attachment size limit. Is there one?

    Yes, the size limit for an email is 20 MB. (http://support.apple.com/kb/PH2629?viewlocale=en_US)

  • What is the default maximum email attachment size (Exchange 2003) on iPads?

    What is the default maximum email attachment size (Exchange 2003) on iPads?

    Maximum message size is determined by the mail server (Exchange in your case), not by the Mail app on your iPad. There are two settings in Exchange 2003 related to message size: One for incoming messages, one for outgoing. Both can be set to Unlimited, or to some number of kilobytes Exchange 2003 is a long time ago for me, but if I remember correctly the default size limit is 10240 KB (10 MB). Once those are set, the admin can also create policies to modify those limits for specific situations. You really need to ask your Exchange administrator how he/she has the max size configured.

  • How do I change the attachment size limit in Calendar Server 6.3, UWC, IWC?

    How do I properly increase or decrease the attachment size limit with Calendar Server and all supported user interfaces to it such as WCAP, UWC (Communications Express) and IWC (Convergence)? From my experience with the Outlook Connector, there seems to be some limit imposed by cshttpd on the size of a file upload (I believe I actually got an HTTP error code back on the wcap request indicating something was too big, sorry I don't have it handy, I'll have to re-test). Additionally, it seems UWC imposes additional limits (Example: http://docs.sun.com/app/docs/doc/819-4440/6n6jfgcjh?l=en&a=view&q=fileSizeHardLimit) but I can't seem to get those to work at all. I found many different web.xml related to UWC and I'm not sure which one to change, I tried a couple but had no success because UWC would always report this error if I uploaded between 4-5 megs: com.iplanet.jato.util.WrapperRuntimeException
    Root cause = [java.io.IOException: Request cancelled because file input field
    "importFile" size is over the configurable limit of 4194304 bytes; see filter init
    parameter fileSizeHardLimit]
    And it would complain about requestSizeLimit I think if it was over 5 megs, claiming that limit was 5242880. IWC gives a generic error when the upload is too big and rejects it.
    I fear that a 4 meg limit will be too imposing and of limited value, so I would either like to raise it, or consider lowering it to 0 bytes so attachments cannot be used at all. I have been looking high and low for information on how to do this and all I can find is the UWC examples. I plan to support the Outlook Connector, UWC, and IWC so the limits should ideally be the same across each. Some of the Exchange data we wish to import does have some attachments so it would be good to continue support for that. I did see some other posts about quota RFEs but at this point I am not concerned about the disk consumption. Can anyone help? Thanks. Please let me know if there is any more information I can provide. I am running SCS6u1 on Solaris 10 SPARC.

    Fred@egr wrote:
    Thanks!!! This is working with IWC and I am pretty sure it will work with Outlook. I didn't think to look at config options for mshttpd since I don't have it installed and ics.conf doesn't list the http.service.maxmessagesize and service.http.maxpostsize by default.http.service.maxmessagesize is only relevant to mshttpd, not cshttpd. service.http.maxpostsize applies to both.
    UWC is still limiting me though; I'm sure I can reconfigure UWC if I just know which file to edit and if I need to redeploy anything. I'm using the same install paths as the SCS6 Single Host example and I'm not sure which the "uwc-deployed-path" is supposed to be. Again, thanks.If you have deployed UWC/CE to Application Server you would edit the following file and restart application-server:
    /opt/SUNWappserver/domains/domain1/generated/xml/j2ee-modules/Communications_Express/web.xml
    e.g.
      <filter>
        <filter-name>MultipartFormServletFilter</filter-name>
        <filter-class>com.sun.uwc.calclient.MultipartFormServletFilter</filter-class>
        <init-param>
          <param-name>fileSizeHardLimit</param-name>
          <param-value>15485760</param-value>
        </init-param>
        <init-param>
          <param-name>requestSizeLimit</param-name>
          <param-value>15485760</param-value>
        </init-param>
        <init-param>
          <param-name>fileSizeLimit</param-name>
          <param-value>15485760</param-value>
        </init-param>
      </filter>Regards,
    Shane.

  • Email Attachment Size Etiquette

    I'm looking for opinions on what is the biggest "polite" email attachment size.
    By this I mean.. how big of a file can you send without calling them to make sure they aren't out of the country for a week because your huge attachment will fill their mailbox and reject all incoming mail for the next three days and it's your fault... Oh and it's your most important client... (I swear this hasn't happened.)
    I'm thinking it is still around 5MB. What are your thoughts.

    Internally in an enterprise, 5MB
    Externally, 1MB, and usually zipped.
    I'd be annoyed if someone was sending me 5MB mails to my iphone over EDGE!

  • Purchasing Ability to Exceed Message/Attachment Size Limit

    Is it possible to purchase the ability to exceed the message/attachment size limit on iCloud?  I keep running into it when I need to send out PDF image files.

    I'm afraid not.

  • Does Hotmail have an attachment size limit? When i attach something with more than 3mb in the mail it isn't send. It gives a resize option.

    Does Hotmail have an attachment size limit? When i attach something with more than 3mb in the mail it isn't send. It gives a resize option.

    Hi. Txs. The problem is that in my pc the limit size is 25mb. But in my ipad the mail only sends files under 3mb.

  • Increase email attachment size

    Hi All,
    We're running Exch2010 servers with approx. 14000 mailboxes. We're planning to increase email attachment size from 10 MB to 20 MB. I'm aware about places I need to make changes but my concern is that do we need to take anything in consideration before increasing
    the attachment size?
    Any calculation about storage impact etc.?
    Thanks, Vik

    Hi All,
    We're running Exch2010 servers with approx. 14000 mailboxes. We're planning to increase email attachment size from 10 MB to 20 MB. I'm aware about places I need to make changes but my concern is that do we need to take anything in consideration before increasing
    the attachment size?
    Any calculation about storage impact etc.?
    Thanks, Vik
    If you are increasing the message size and have concerns, you can plug that info into the mailbox calculator and increase the average message size number.
    http://gallery.technet.microsoft.com/Exchange-2010-Mailbox-Server-Role-/
    Note however that just because you allow larger messages, it doesnt necessarily mean the average message size per user will increase. 
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • EMail attachment size, what is your limit???

    MIME encoding sucks :lol:
    A email with a 35meg .zip attachment comes in as 49.6megs (using the smtp logs)
    I've got a non-tech CTO that want to accept 50meg attachments. It seems to be working but sometimes the SOPHOS AV engine crapsout and the email ends up in the quarantine.
    For business to business email what is a reasonable size limit?

    MIME encoding doesn't suck! What sucks is the fact that we still need to do it. The fact that SMTP is still a 7-bit channel is annoying.
    I don't administer an Exchange server myself, but our Exchange admins explained to me that Exchange does size limiting based on the native (aka decoded) size of the attachments. The FreeBSD/qmail server I run enforces the maximum message size based on the wire size, i.e. base64-encoded for anything binary. Since base64 is a 6-in-8 encoding, that increases the object size by 33%. In order to reconcile the size limits on these two systems, the Exchange limit is set to 30 MB and the qmail limit is set to 40 MB. That's usually enough for the PHBs to mail around their humongous PowerPoint presentations.
    I haven't bothered messing with the message size limits on our IronPorts, since our back end servers enforce their own limits.

  • Outlook 2010 attachment size limit

    We're using a sendmail server for our email and have been using Outlook 2003 for the client.  I'm evaluating Outlook 2010 but we've hit a snag.  Total attachments over ~20MB result in a "The attachment size exceeds the allowable limit". 
    This works fine under 2003.
    How can I fix this?

    Hi,
    First, please let us know the email server you are using. Is it Exchange and what’s the version? Also, does this issue occur on all the client computers or only
    one some of the computers?
    As this issue might be related to some settings on the Exchange server side, you may also contact your network administrator to check the settings on the server side.
    If there are no attachment limitation settings on the server side, we can troubleshoot the issue by the steps below:
    Step 1: Disable background transfer of attachments to the Exchange server.
    =============
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you
    follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
    1. Run regedit on the outlook client computer that has the issue.
    2. Locate the following registry key:
    [HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Outlook]
    3. On the Edit menu, click Add Value, and then add the following registry value:
    Value name: DisableBGSave
    Data type: REG_DWORD
    Radix: Hexadecimal
    Value data: 1
    Note: You will see the Policies key if policies are deployed in your environment. If so, add the registry key under the following registry key:
    [HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook]
    4. Restart Outlook and test the issue again. Is the issue resolved? If the problem persists, let’s continue.
    Step 2: Start Outlook in online mode/safe mode.
    =============
    1. In Outlook, click File > Info > Account settings > Account settings.
    2. Click your Exchange account, and click the
    Change button, then More settings,
    Advanced tab. Uncheck Use cached Exchange mode.
    3. Exit Outlook . Click Start, point to All Programs, and then point to
    Microsoft Office.
    4. Press and hold the
    CTRL key, and then click Microsoft Outlook.
    Is the problem resolved? If not, let’s continue.
    Step 3: Create a new Outlook profile.
    =============
    1.    Exit Outlook.
    2.   
    Go to Start > Control Panel, click or double-click
    Mail.
    Mail appears in different Control Panel locations depending upon the version of the Microsoft Windows operating system, Control Panel view selected, and whether a
    32- or 64-bit operating system or version of Outlook is installed.
    The easiest way to locate
    Mail is to open Control Panel in Windows, and then in the
    Search box at the top of window, type Mail. In
    Control Panel for Windows XP, type Mail in the
    Address box.
    Note   
    The Mail icon appears after Outlook starts for the first time.
    The title bar of the Mail Setup dialog box contains the name of the current profile. To select a different existing profile, click Show Profiles, select the profile
    name, and then click Properties.
    3.   
    Click Show Profiles. Choose Prompt for a profile to be used.
    4.   
    Click Add.
    5.   
    Type a name for the profile, and then click OK.
    6.   
    Start Outlook, and choose this new profile.
    If this problem does not occur in the new Outlook profile, the old Outlook is corrupted. We can delete that and use a new Outlook profile.
    Step 4: If it still not resolved, create a new Outlook profile on another PC that does not have this issue, then check to see if it persists. This can help us to narrow
    down that if the issue is specific to the machines.
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
    you, please feel free to let me know.
    Best Regards,
    Sally Tang

  • Max email attachment size on e61i

    I can not find this information anywhere on the forums or nokia's support pages.
    anyone know what the maximum file size for sending an email attachment is on the e61i?
    and if there's any way to change this in the included email app?
    and/or have a suggestion for a better email application?
    thanks!

    Thanks for answer. I'm using Google Drive very often but for private purposes.
    In matter of fact I bought Yoga 2 for doing my daily work - sending a lot of emails with multiple attachments to employees at the same time. We're using accounts on exchange server... so I need a good mail client. I have tried many of them but in my opinion Lenovo's mail client is the best - intuitive, functional and transparent.
    However it has one more limitation - you can send e-mails up to 10 people max at the same time.
    Everything would be ok if not these limitations.
    I hope that Lenovo will change it soon.

  • Exchange 2013 / Outlook 2010+ Attachment size limit

    I have an issue with my Exchange 2013 deployment.  I am unable to send attachments over 10MB.  I know, I know not another one of those threads, but I promise I have searched for a solution to my issue as best I can before posting.
    So in the EMC I have set the Send/Receive connectors to unlimited, I have set the organizational limits to unlimited, I have even set both the Internal and ExternalDsnMaxMessageAttachSize
    to 2047MB.
    I have restarted the the Exchange Transport service, failing that I restarted the Exchange Box.  I have closed and opened my Outlook Client Several times but when ever
    I select an attachment over 10MB I get the message "The Attachment size exceed the allowable limit"
    There must be something I am missing but I can't see it.  I did also check my (and other) user accounts to confirm that no limits had somehow been set, they are all unconfigured or
    blank in the EMC which my research has told means there is no limit on the account.
    Now I know in in non exchange environment there are limits on the client, but attached to an exchange server these limits are supposed to be driven by exchange.
    Here is the output of Get-TransportConfig
    AddressBookPolicyRoutingEnabled                             : False
    AnonymousSenderToRecipientRatePerHour                       : 1800
    ClearCategories                                             : True
    ConvertDisclaimerWrapperToEml                               : False
    DSNConversionMode                                           : UseExchangeDSNs
    JournalArchivingEnabled                                     : False
    ExternalDelayDsnEnabled                                     : True
    ExternalDsnDefaultLanguage                                  :
    ExternalDsnLanguageDetectionEnabled                         : True
    ExternalDsnMaxMessageAttachSize                             : 1.999 GB (2,146,435,072 bytes)
    ExternalDsnReportingAuthority                               :
    ExternalDsnSendHtml                                         : True
    ExternalPostmasterAddress                                   :
    GenerateCopyOfDSNFor                                        : {}
    HygieneSuite                                                : Standard
    InternalDelayDsnEnabled                                     : True
    InternalDsnDefaultLanguage                                  :
    InternalDsnLanguageDetectionEnabled                         : True
    InternalDsnMaxMessageAttachSize                             : 1.999 GB (2,146,435,072 bytes)
    InternalDsnReportingAuthority                               :
    InternalDsnSendHtml                                         : True
    InternalSMTPServers                                         : {}
    JournalingReportNdrTo                                       : <>
    LegacyJournalingMigrationEnabled                            : False
    LegacyArchiveJournalingEnabled                              : False
    LegacyArchiveLiveJournalingEnabled                          : False
    RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling : False
    RedirectDLMessagesForLegacyArchiveJournaling                : False
    MaxDumpsterSizePerDatabase                                  : 18 MB (18,874,368 bytes)
    MaxDumpsterTime                                             : 7.00:00:00
    MaxReceiveSize                                              : Unlimited
    MaxRecipientEnvelopeLimit                                   : 500
    MaxRetriesForLocalSiteShadow                                : 2
    MaxRetriesForRemoteSiteShadow                               : 4
    MaxSendSize                                                 : Unlimited
    MigrationEnabled                                            : False
    OpenDomainRoutingEnabled                                    : False
    RejectMessageOnShadowFailure                                : False
    Rfc2231EncodingEnabled                                      : False
    SafetyNetHoldTime                                           : 2.00:00:00
    ShadowHeartbeatFrequency                                    : 00:02:00
    ShadowMessageAutoDiscardInterval                            : 2.00:00:00
    ShadowMessagePreferenceSetting                              : PreferRemote
    ShadowRedundancyEnabled                                     : True
    ShadowResubmitTimeSpan                                      : 03:00:00
    SupervisionTags                                             : {Reject, Allow}
    TLSReceiveDomainSecureList                                  : {}
    TLSSendDomainSecureList                                     : {}
    VerifySecureSubmitEnabled                                   : False
    VoicemailJournalingEnabled                                  : True
    HeaderPromotionModeSetting                                  : NoCreate
    Xexch50Enabled                                              : True
    Thanks in advance for any assistance.
    Carl

    I have an issue with my Exchange 2013 deployment.  I am unable to send attachments over 10MB.  I know, I know not another one of those threads, but I promise I have searched for a solution to my issue as best I can before posting.
    So in the EMC I have set the Send/Receive connectors to unlimited, I have set the organizational limits to unlimited, I have even set both the Internal and ExternalDsnMaxMessageAttachSize
    to 2047MB.
    I have restarted the the Exchange Transport service, failing that I restarted the Exchange Box.  I have closed and opened my Outlook Client Several times but when ever
    I select an attachment over 10MB I get the message "The Attachment size exceed the allowable limit"
    There must be something I am missing but I can't see it.  I did also check my (and other) user accounts to confirm that no limits had somehow been set, they are all unconfigured or
    blank in the EMC which my research has told means there is no limit on the account.
    Now I know in in non exchange environment there are limits on the client, but attached to an exchange server these limits are supposed to be driven by exchange.
    Here is the output of Get-TransportConfig
    AddressBookPolicyRoutingEnabled                             : False
    AnonymousSenderToRecipientRatePerHour                       : 1800
    ClearCategories                                             : True
    ConvertDisclaimerWrapperToEml                               : False
    DSNConversionMode                                           : UseExchangeDSNs
    JournalArchivingEnabled                                     : False
    ExternalDelayDsnEnabled                                     : True
    ExternalDsnDefaultLanguage                                  :
    ExternalDsnLanguageDetectionEnabled                         : True
    ExternalDsnMaxMessageAttachSize                             : 1.999 GB (2,146,435,072 bytes)
    ExternalDsnReportingAuthority                               :
    ExternalDsnSendHtml                                         : True
    ExternalPostmasterAddress                                   :
    GenerateCopyOfDSNFor                                        : {}
    HygieneSuite                                                : Standard
    InternalDelayDsnEnabled                                     : True
    InternalDsnDefaultLanguage                                  :
    InternalDsnLanguageDetectionEnabled                         : True
    InternalDsnMaxMessageAttachSize                             : 1.999 GB (2,146,435,072 bytes)
    InternalDsnReportingAuthority                               :
    InternalDsnSendHtml                                         : True
    InternalSMTPServers                                         : {}
    JournalingReportNdrTo                                       : <>
    LegacyJournalingMigrationEnabled                            : False
    LegacyArchiveJournalingEnabled                              : False
    LegacyArchiveLiveJournalingEnabled                          : False
    RedirectUnprovisionedUserMessagesForLegacyArchiveJournaling : False
    RedirectDLMessagesForLegacyArchiveJournaling                : False
    MaxDumpsterSizePerDatabase                                  : 18 MB (18,874,368 bytes)
    MaxDumpsterTime                                             : 7.00:00:00
    MaxReceiveSize                                              : Unlimited
    MaxRecipientEnvelopeLimit                                   : 500
    MaxRetriesForLocalSiteShadow                                : 2
    MaxRetriesForRemoteSiteShadow                               : 4
    MaxSendSize                                                 : Unlimited
    MigrationEnabled                                            : False
    OpenDomainRoutingEnabled                                    : False
    RejectMessageOnShadowFailure                                : False
    Rfc2231EncodingEnabled                                      : False
    SafetyNetHoldTime                                           : 2.00:00:00
    ShadowHeartbeatFrequency                                    : 00:02:00
    ShadowMessageAutoDiscardInterval                            : 2.00:00:00
    ShadowMessagePreferenceSetting                              : PreferRemote
    ShadowRedundancyEnabled                                     : True
    ShadowResubmitTimeSpan                                      : 03:00:00
    SupervisionTags                                             : {Reject, Allow}
    TLSReceiveDomainSecureList                                  : {}
    TLSSendDomainSecureList                                     : {}
    VerifySecureSubmitEnabled                                   : False
    VoicemailJournalingEnabled                                  : True
    HeaderPromotionModeSetting                                  : NoCreate
    Xexch50Enabled                                              : True
    Thanks in advance for any assistance.
    Carl
    1. If you send a message larger than 10MB from an external client to your org, does it bounce back because its over the limit?
    2. Do you see the same problem sending internally with OWA?
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Maybe you are looking for