Email attachments - Network Access Message, Error Code: 500

Hi!
'''Can't open or save attachments from my email''' (after upgrade to Firefox 6.0). By clicking on them, the tab with an error comes (Error Code: 500):
'''Network Access Message: The page cannot be displayed'''
'''Next info:''' If i simply add an 's' to http:// in the error tab link (manually rewrite the adress to https://), '''it works''' and the attachment opens (jpg, pdf, sound file or all others) or can be saved! (comes the dialog window if I want to open or save it).
I am using XP, Mozilla Firefox 6.0.
With IE the same problem.
With Firefox 5.0 came this problem only from time to time, vanished mostly by refreshing the site.
Under W7 on my laptop no problems occured.
I tried to search in the Mozilla support, forums, google and in the Firefox network and proxy setup, but i can't figure it out.
Thanks for advices!

Dear Wang Chao:
    I checked http://localhost:8080/flashaccessserver/flashaccess/license/v1?tenant=sampletenant .It seems alright ,as below:
    License Server is setup correctly. Total successful requests = 0 requests in 0 ms. Average response time = 0 ms. Average throughput = 0 requests per sec Verifying tenant 'flashaccessserver/sampletenant'... Schema ... Valid. Credentials ... Valid. Authorizer extensions: com.adobe.flashaccess.server.license.extension.auth.sample.SampleAuthorizer ... Valid.
    PS:I posted vinwang<[email protected]> with demanded files ,but I did see your private email ,did I miss it?
Best regards,
Sun zhenyu

Similar Messages

HTTP request failed. Error code: "500". Error message

Hi ,
When we are trying to test webservices (exposed webservice in PI) scenarios in PI box we are getting error related Adapter framework service
HTTP request failed. Error code: "500". Error message: "Internal Server Error [http://xxxx:xxxx/AdapterFramework/rtc]"
in the RWB it is showing that
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message 01d76ce0-972e-11e0-c652-b25394b91e0c(INBOUND) expired
Can any body help .
Edited by: subhaniABAP on Jun 15, 2011 11:30 AM

Hi,
If you want to resolve this error when dealing with the messages, please try the cache refresh with the link:
http://host:j2eeport/CPACache/refresh?mode=full
And also go thorugh:
- In Integration Repository/Directory go to menu Environment ->
Clear SLD Data Cache
- In R/3 go to transaction SXI_CACHE -> menu XI Runtime Cache -> Start
Complete Cache Refresh
MESSAGE EXPIRED:
Increase the value of the timeout parameter 'xiadapter.inbound.timeout.default' under Services -> 'XPI Adapter:XI'
to a higher value say '600000'.
Regards,
Caio Cagnani

Firefox user when i try to access my gmail,orkut and yahoomail i get this error message Error code: sec_error_expired_certificate All the other sites are working fine please help Plugins installed:

Firefox user
when i try to access my gmail,orkut and yahoomail i get this error message
Error code: sec_error_expired_certificate
All the other sites are working fine
please help
Plugins installed:
== URL of affected sites ==
http://

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

Dreamweaver 8 bindings - to MySQL, error code 500

Hello!
Well, I've spent five days searching online forums, and a few
posts come close to my problem, but not getting any clues to a
solution. I hope one of the resident experts or members could shed
some light...
Windows XP
Dreamweaver 8.0.2 (just upgraded - same problem)
- Used setup-v1.17-apache-2.2.2-win32.exe for setup - from
devside.net PHP 5.2.0-dev MySQL 4.1.7 (installed new after package.
Have two instances of mysql on my system - one active, one in
manual-inactive)
- All was going well until trying to establish bindings in
Dreamweaver. PHP is up and running. MySQL loaded, and database
connection fine. Bindings gets the error... "HTTP Error Code 500
Internal Server Error"
Just getting back to it... Again, thank you for your help!
Dreamweaver 8 has support for PHP 5. Version I'm using is
5.2.0. MX specifies versions 4.x and above are required. I'll have
to research if the support cuts off at 5.0.
My Connections file: conn_newland.php (I'm following the book
tutorial):
<?php
# FileName="Connection_php_mysql.htm"
# Type="MYSQL"
# HTTP="true"
$hostname_conn_newland = "localhost";
$database_conn_newland = "newland_tours";
$username_conn_newland = "root";
$password_conn_newland = "";
$conn_newland = mysql_pconnect($hostname_conn_newland,
$username_conn_newland, $password_conn_newland) or
die(mysql_error());
$Recordset1 = mysql_query("SHOW variables", $Connection1);
echo "<table border=1 width=100%>";
while ($row_Recordset1 = mysql_fetch_assoc($Recordset1)) {
echo
"<tr><td>".$row_Recordset1['Variable_name']."</td><td>".$row_Recordset1['Value']."</td></ tr>";
echo "</table>";
?>
Recordset parameters I entered in bindings:
Name: rs_journal
Connection: conn_newland
Table: tbl_journal
Columns: Selected - journalID, journal_entry
Filter: none
Sort: journalID Descending
Clicking Test gives: "HTTP Error Code 500 Internal Server
Error"
By the way, the reason I didn't specify a password in "root'
is that I had a problem before that I didn't know enough to
overcome, so had to reinstall MySQL. However, the same error occurs
if I specify another user name and password (previously set up).
7:30 pm -
Adding to this post...
I found the following at
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_16515.
However, it appears it may be referring only to Dreamweaver MX 2004
on Mac OS X. I have Dreamweaver 8 on Windows XP:
Verify that the connection scripts are up on the server
This section is related to the section above. In a web
browser, browse to the URL prefix you have defined in the Testing
Server category of the site definition and add
/_mmServerScripts/MMHTTPDB.php. For example:
http:/myserver/mysite/_mmServerScripts/MMHTTPDB.php. If things are
working correctly, you should see something like the following text
returned in the web browser:
Notice: Undefined index: Type in
c:\inetpub\wwwroot\mysite\_mmServerScripts\MMHTTPDB.php on line 13
Notice: Undefined variable: oConn in
c:\inetpub\wwwroot\mysite\_mmServerScripts\MMHTTPDB.php on line 20
When I go to the file above, this is the message I receive
(only thing that appears):
The files from the _mmServerScripts folder are for the server
model PHP-MySQL. You try to connect to a database using a different
server model . Please remove this folder outside the Dreamweaver
environment on both local and testing machines and try again.\n
Is there a hint here of what the problem is? I need some help
in possible interpretations.
Previous attempts made to solve:
- re-installed MySQL with mysql-5.0.24-win32.zip in
recommended directory (outside the www directory). I now have two
instances of MySQL on my local server - one set to automatic
loading and the other manual (switched off)
- one post suggested problem might be with ODBC - installed
SQL ODBC with mysql-connector-odbc-3.51.12-win32.msi. However, I
don't have a clue as to whether it's connected to anything...
- successfully connected to SQL database through root without
password and specific logon and password. No difference.
- other posts suggest problem could reside in php.ini,
htaccess, my.ini (SQL). I know where to find them, but don't have
an understanding of what parameters to shift, if any. One post
suggested a port problem, and I did see a port problem, presently
set to 3306.
From what I've been able to gather, this has been recognized
as an issue before, but there doesn't seem to be any documentation
online (or at least what I've been able to find) dealing with this.
And any mention of the problem that I've seen references
Dreamweaver MX, not 8, although I don't think the version
difference is a significant issue.
This error must be relatively rare, or I'd see more out there
about it. Still, I hope that at least one of the community experts
may have come across it.
Will be waiting with bated breath -- at least for a few
days...
Thanks!
Joe

Hello,
I have also had the same error - namely that whilst I could connect via ftp, upload/download files, and view database tables, any attempt to view of modify recordsets resulted in error 500.
Having checked other potential causes (e.g. selection/non-selection use of passive FTP setting, enabling of php, etc.), on the back of posts here I contacted my host and asked if if could relate to mod security, as further investigation revealed that the issue only occurred on sites where mod security had not been disabled (I don't like to disable mod security for obvious reasons - and I'm told you can't do that site by site with apache2 anyway).
After a few false starts, the problem was resolved - with the following response from my host: "The false positives were being generated by "/_mmServerScripts/MMHTTPDB.php" and that is what we've worked around in the rules. As such, any domain on [servername] using that script in the same way shouldn't generate a false-positive moving forward."
So it seems the answer (assuming your on an apache server of course) may be to modify the rules to allow full access for MMHTTPDB.php.
I hope that is of help to some.

IM error code 500 for sprint centro

I have been receiving error code 500 "server is temporarily unavailable" for the past 2 days and I get it when attempting to log into yahoo or msn. I haven't been able to find a real solution for this anywhere and I'm hoping someone here can help. I've done a soft, warm and hard reset on my phone...deleted the IM program, attempted to reinstall it but was unable to do so (yet I still have access to the program) and I'm still receiving the same message. Any help is very appreciated.
Post relates to: Centro (Sprint)

I can't offer any help, but can commiserate a bit.
The IM app has been pretty flaky on my AT&T Centro. I'll see this error for several days, then it works fine.
I just logged into AIM and Yahoo with mine and it worked correctly today...?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

BT Vision - HDD Access failed: error code VDR370 ?...

For weeks this box as been playing up, rebooting it self for now reason, this i can take. Almost 2 weeks ago, woke up for work, turn the TV on and was presented with this: Grey blueish screen: Top left corner "Starting" - Bottom right corner - "BT Vision" - and the bottom middle this "HDD Access Failed: error code VDR370" Now to me this looks like an Hard Drive failure. Called the Tech Help, the guy said I must be mistaken, that cannot be the code, I said yes. After spelling out to this idiot that I have gone through the steps on this web site (4 to be precise), it is not working. i asked can you find out what this means, he said he doesn't know. I asked to speak to someone who can tell me what this means, nop, all he can do is send out an engineer which will take at least a week for them to arrive, then to make matters worse, if the problem is user error I will be billed £125.95 WT*.
I explained I am an IT engineer, and since no one there can tell me what this error is, I am confident that this error is Hard drive problem, as it is clicking also. So my question is: What does this error mean " HDD ACCESS FAILED: ERROR CODE VDR370" SIMPLE.

Hi bazk123,
Thanks for posting. It does sound like this is a drive failure. Is the box making any clicking or whirring sounds? If so it does require an engineer visit to check the box and replace if necessary. I can look into this for you if you wish. Just drop me an email with the details. You'll get the "contact us" form in the about me section of my profile.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

CLIENT_SEND_FAILED error code: 500, error text: Internal Server Error

Hi,
Developed Proxy <-->PI<-->JDBC SELECT scenario and getting the following error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
When I cross checked the JDBC Receiver communication channel in Runtime Work Bench
request and response were successfull. RWB shows the following message.
2009-06-12 09:34:50 Information The message was successfully received by the messaging system.
2009-06-12 09:34:50 Information Message successfully put into the queue.
2009-06-12 09:34:50 Information The message was successfully retrieved from the request queue.
2009-06-12 09:34:50 Information The message status was set to DLNG.
2009-06-12 09:34:50 Information Delivering to channel: DB2ReceiverTableSPT
2009-06-12 09:34:50 Information JDBC Adapter Receiver processing started, required QoS BestEffort
2009-06-12 09:34:50 Information JDBC Adapter Receiver Channel DB2ReceiverTableSPT:
2009-06-12 09:36:35 Information Database request processed successfully.
2009-06-12 09:36:35 Information The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2009-06-12 09:36:35 Information The message status was set to DLVD.
I had gone thru all the previous threads related to 'CLIENT_SEND_FAILED' but
those did not solve my problem.
Can some one help me to solve this issue.
Thanks,
Vijay.

I made necessary changes as per the blog. Appended '_response' for JDBC response structure.
Still I am facing same problem.
Strange....delibarately gave the link so that you can cross-check the JDBC config on receiver side...I assume that the proxy is configured properly with the Sync communication....also mapping is done accordingly...
Regards,
Abhishek.

Error code 500 internal server error

I got a computer from my brother. It has windows 7 starter on it. It has been running fine, but now it says that the Microsoft teredo tunneling adapter driver is not working. It also gives me an error code 500 internal server error, when I try to search
for album information on windows media player. I don't understand IT jargon so can someone help me with this in plain English.

Hi,
Could you please have a share with the event log information? Reference for
opening Event Viewer.
What information appears in event logs? (Event Viewer)
For the Microsoft teredo tunneling adapter driver, take a try to uninstall and then reinstall it in
Device Manager.
Error code 500 internal server error, if possible please have a share with a screenshot for this error message.
As it states, the error is based on the server side.
Here is a similar thread for reference:
Windows Media Player Script Error while looking up album info
Best regards
Michael Shao
TechNet Community Support

PHP MySQL Error Code 500

May be someone can help me out with this problem.
I have setup a new site using PHP MySQL and Dreamweaver 8.02.
Dreamweaver connects to the database but after creating a
recordset the recordset cannot be used.
instead Dreamweaver returns:
HTTP Error Code 500 internal Server Error
Any help will be much appriciated.
Jos

Hello,
I have also had the same error - namely that whilst I could connect via ftp, upload/download files, and view database tables, any attempt to view of modify recordsets resulted in error 500.
Having checked other potential causes (e.g. selection/non-selection use of passive FTP setting, enabling of php, etc.), on the back of posts here I contacted my host and asked if if could relate to mod security, as further investigation revealed that the issue only occurred on sites where mod security had not been disabled (I don't like to disable mod security for obvious reasons - and I'm told you can't do that site by site with apache2 anyway).
After a few false starts, the problem was resolved - with the following response from my host: "The false positives were being generated by "/_mmServerScripts/MMHTTPDB.php" and that is what we've worked around in the rules. As such, any domain on [servername] using that script in the same way shouldn't generate a false-positive moving forward."
So it seems the answer (assuming your on an apache server of course) may be to modify the rules to allow full access for MMHTTPDB.php.
I hope that is of help to some.

POP Email on WP8 (Lumia 920) - Error Code 80004005

Hello Astra 2025,
Sorry to contact you on a differnet issue.
I have had problems with my POP e-mail on my Lumia since i got it so cant receive my woork e-mails.
Can you please point me towards a discussion that references this or do you have some background knowledge as I have hit a dead end with Nokia....
please read the following thread:-
http://answers.microsoft.com/en-us/winphone/forum/wp8-wpemail/pop-email-on-wp8-lumia-920-error-code-...

I do not know how to set up an IMAP account in my shared hosting account with Plesk, which provides POP3/SMTP access to emails.
I am a Microsoft Partner, develop Microsoft based solutions, and genuinely like the Microosft platform. Still, after about 6 months and many hundreds of dollars later, I find myself running out of patience. How long should I be patient for a solution, when Nokia/Microsoft/T-Mobile will not give me a solution or be part of the process.
Microsoft Partner Support, as mentioned, told me this morning in response to a follow-up from yesterday that there is nothing else that they can do and that the situation is out of their hands. If it is out of their hands and they do not want to do anything about it, then what about me?
Should I bite the bullet, return the phone, and sadly jump onto the Samsung Galaxy S4 Android bandwagon? If I do that, I will feel cheated, as I really would like to use Windows. I kind of like the Windows Phone 8 interface. How long should I be patient?
Email is a big issue. I am sure that there are other issues too, just I am not aware of it left.
By the way, I never received an Portino update. The last update was the one that Microsoft gave back in November, which caused the problem in the first place.
Thanks for your comment. :-) It is nice to know that I am not alone I am not alone in suffering with this problem.
I really am thinking that this 80004005 error is a deal breaker, which is so sad.
By the way, Nokia cannot do anything. Microsoft owns the OS and it is up to the carrier, T-Mobile USA in my case, to do something about the problem. Microsoft posts major updates, which causes breaks and annoyances. T-Mobile is resonsible for minor updates and fixes. T-Mobile, as you can tell by visiting t-mobile.com (as of 5/2/2013) is no longer interested in the Windows platform (okay Catwalk announced, but that has the same problem. Catwalk is a Lumia 922 or so, as I understand things). T-Mobile will not post an update. They never have, so why start now?

Cisco ISE 1.1.4 Error Code 500

Hello,
I just installed the evaluation of Cisco ISE 1.1.4 on ESXi 5.1.
My EXSi config is this:
4GB RAM, 80GB HDD, 2 cores, Redhat 5 32bit
I was able to install it with no problem, but when I tried to login using the web GUI, I am getting an error message stating:
Internal Error
Error Code 500.
I am able to login using the console and SSH. I already set the correct timezone for both ISE and my computer. I also tried different browsers, but I am still getting the same error and can't login at all via GUI.
Any help would be greatly appreciated.
Thanks

Here is my show application status ise output
KA-ISE/admin# show application status ise
ISE Database listener is running, PID: 3960
ISE Database is running, number of processes: 28
ISE Application Server is still initializing.
ISE M&T Session Database is running, PID: 3620
ISE M&T Log Collector is running, PID: 5785
ISE M&T Log Processor is running, PID: 6001
ISE M&T Alert Process is running, PID: 5674
% WARNING: ISE DISK SIZE NOT LARGE ENOUGH FOR PRODUCTION USE
% RECOMMENDED DISK SIZE: 200 GB, CURRENT DISK SIZE: 85 GB
KA-ISE/admin#
I have rebooted my ISE server, but I am still getting the same error message. Regarding the DNS, I have not set up my AD/DNS yet. But I am guessing I should be able to GUI to ISE server regardless of not having it connected to AD or DNS.

Every time i launch garageband i get this message "Error code 28773 was returned by the Audio driver."

HI. I just got a new macbook pro 15".
every time i launch garageband i get this message
"Error code 28773 was returned by the Audio driver."
when i hit record, the shaded area in GB starts to advance, but it doesn't record any sound, and when i hit the space bar, the recorded area disappears.
anyone know how to fix this?
I have installed BOOM, but i think that's the only extra sound software i have.]
PLEASE HELP!
thanks,
mojoman22

Please read this whole message carefully, especially the warnings, before doing anything.
1. The changes to your configuration suggested here should be considered provisional; they may not solve your problem, or they may remove functionality that you find useful. If a third-party system modification that you want to keep is causing the problem, seek help from its developer.
2. WARNING: Back up all data now if you haven’t already done so. Before proceeding, you must be sure you can restore your system to its present state, even if it becomes unbootable. If you’re not sure you can do that, STOP — DON’T CHANGE ANYTHING. If you’re dissatisfied with the results of the procedure suggested below, restore from your backup. I will not be responsible for the consequences, and I will not be able to help, if you ignore this warning.
3. You should either remove or update the following system modification(s), if an update is available from the developer:
Parallels
and definitely remove at least the following:
Boom
† MacKeeper
† VirusBarrier
4. Whatever you remove must be removed completely, and (unless otherwise specified in this message) the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job. I can't be more specific, because I don't install such things myself. Please do your own research.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
Again, please don't ask me to do this research for you. You can do it better than I can, because I haven't installed the product and I may not even know what it is.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.
5. I recommend that you never reinstall the modifications marked with a dagger (†) above, if any. If your problem is resolved after uninstalling all the above modifications and rebooting, but you still want to use some of those not marked with a dagger, you can experiment with putting them back, one at a time, testing carefully after each step. Keep in mind that system modifications may be incompatible with each other or with future OS X updates, so it may not be clear which one is at fault.
6. If you still have problems after making the suggested changes and rebooting, post again. Remember: if you don’t like the results of this procedure, you can undo it by restoring from the last backup you made before you started.
Remove the "MacKeeper" crapware as follows.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions, nor do I intend to repeat the test.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select Go ▹ Applications from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. A dialog will pop up asking why you want to uninstall it. You don't have to provide that information. Enter anything you like in the text box, then click the Uninstall button. All the functional components of the software will be deleted. That's the only useful feature of "MacKeeper:" it deletes itself. Reboot.
Do not try to uninstall by dragging the MacKeeper icon in the Dock or the LaunchPad to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this kind of material is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.

I receive the following error message:Error code: ssl_error_rx_unexpected_client_hello)

Error code: ssl_error_rx_unexpected_client_hello)
== URL of affected sites ==
http://gmail.com

I cannot access gmail. I get the following error message:
(Error code: ssl_error_rx_unexpected_client_hello
Need assistance, please.

Access Denied error (code 5)

Hi
I am using server 2008 r2 sp1 while installing any windows update or my sql I am getting error code 5 access denied
and i am installing with Admin ID. What can be the reason?

Checked this ?
https://social.technet.microsoft.com/Forums/en-US/522a1177-22eb-458b-a113-d1958e0b991e/sql-express-access-denied-error-code-5?forum=sqlexpress
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Failed to Open FR report With Error code 500 - 'unable to process request'

I am running a load test against PBCS service. The service is load-balanced with 2 managed servers : EPMServer0 and EPMServer1
When I put the loads with 60 VUs -- all visiting FR reports, the service runs without error. But when the VU# increased to 90, it began to respond with Error code 500 - 'unable to process request'.
I tried to correlate the FRLogging logs to the errors, and found during the time those error happens, there are logs like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>
[2013-09-27T05:21:29.325+00:00] [EPMServer0] [WARNING] [00365] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sysname50134114.PerfUser0439] [ecid: 004tpQ^VFHT7m3RLIYDCif0007a30002bD,0:2:1:1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_CLASS: com.hyperion.reporting.connection.UserConnection] [SRC_METHOD: openConnection] User authentication information is invalid. Unable to connect to datasource.[[
com.hyperion.reporting.util.HyperionReportException: Error connecting to database connection Vision:Plan1: Failed to sync with user provisioning.com.hyperion.planning.HspRuntimeException
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.<init>(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getConnection(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.webviewer.WebDynamicReport.validateDatasources(Unknown Source)
    at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrhtmlreport._jspService(__hrhtmlreport.java:1999)
        at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.needAuthentication(Unknown Source)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.FRClusterHelper.doFilter(Unknown Source)
>>>>>>>>>>>>>>>>>>>>>>>>>
It looks like the servlet failed to open the datasource connection while handling the FR requests. But there are several data sources. My questions are:
1) Which datasource is corresponding to the issue? Is it EPMSystemRegistry?
2) What is the recommended configuration for the connection pool max capacity setting? -- current setting for EPMSystemRegistry is 30
3) Whether it could be a connection leak problem as only 90 concurrent end user is visiting and it failed to connect?
Thanks,
Ellick Lu
Type
JNDI Name
Targets
aif_datasource
Generic
jdbc/aif_datasource
EPMServer
calc_datasource
Generic
jdbc/calc_datasource
EPMServer
EPMSystemRegistry
Generic
jdbc/EPMSystemRegistry
EPMServer
odiMasterRepository
Generic
jdbc/odiMasterRepository
EPMServer
planning_datasource
Generic
jdbc/planning_datasource
EPMServer
raframework_datasource
Generic
jdbc/raframework_datasource
EPMServer

It is checking for Database connection in Workspace. Check Editing Database Connections
Can those users login to Planning? Do they have correct security setup (I guess not)
Regards
Celvin
http://www.orahyplabs.com

Email attachments - Network Access Message, Error Code: 500

Similar Messages

Maybe you are looking for