Email body is not working

I cannot type in the body of an email and anything that I forward is blank. It doesn't matter if I am writing a new email or replying. I recently updated safari. The weird thing is, I have had this problem for over a week now and the other day, my husband wrote an email on my mac and sent it. It worked once but now he can't write in the email body either! Any ideas? I have already had a diasgnostic check done by my internet provider and they said everything is ok on their end. BTW, I have a 2006 IMAC 17" OS X 10.6.8 that I upgraded to snow leopard a few months ago.
HELP!!!!!!!!!!

I notice that iPhone does not support any Chinese characters in its email interface.
If you mean that you cannot read the text of emails in Chinese, I suspect that is because these emails fail to follow the required international encoding standards. Are there no emails which display correctly? I can send you tests if you want.
The iPhone mail program currently lacks the ability to manually correct for errors by the sender which is normally possible on a full computer.
I also notice Safari support Chinese character in email Subject line but not in the email body.
This would probably happen because of bad webmail encoding practices by the sender. Surely you can can read normal Chinese webpages without problems, right? Again the iPhone Safari lacks the abililty to correct for sender errors at this stage.
Is somebody working on Chinese Character display in email interface?
I don't know if they will implement corrections for senders that don't follow international standards, if that is the problem. This forum is just other users, so make sure you tell Apple what you want via feedback:
http://www.apple.com/feedback/iphone.html

Similar Messages

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

Multiple recipient email addresses is not working for xsl & PDF Attachment

multiple recipient email addresses is not working properly when
to list has some external email address and sending xls and PDF file as an attachment.
Test Scenario:
(A) Create mail target activity
1)To email : use the multiple email id with some external domain (ex.
[email protected] ,[email protected], [email protected])
2)File attachment with .xls file and this file is sending to mail target as an inputstream(at runtime)
3)Use all other valid parameter in activity.
(B) Create a process flow File source to mail target
Execute the process flow.
Actual Result: Mail is received by every email account. Only external email account get correct file but other email account(as ([email protected])) attachment files
displaying message
�abc.xls� can not be accessed. The file may be read-only, Or you may be
trying to access a read only location. Or, the server the document is stored on
may not be responding.�
When i trying to open xls and PDF file
Expected Result:
All type of file attachments should be supported with all valid email address
(servers).
Pls help me about this senario:
What is problem in this case:
I am sending code
Session session =getSession(host,port,secure);
session.setDebug(this._debug);
               Transport trans = connect(host,port,session,userID,password);
               Message message = new MimeMessage(session);
               InternetAddress[] iAddr = null;
               message.setFrom(new InternetAddress(fromName));
               iAddr = InternetAddress.parse(toUserName, true);
               message.setRecipients(Message.RecipientType.TO, iAddr);
               message.setSubject(subject);
               //BodyPart messageBodyPart = new MimeBodyPart();
               Multipart multipart = new MimeMultipart();
               MimeBodyPart messageBodyPart=null;
if(dataLocation!=null && dataLocation.equalsIgnoreCase("ATTACHMENT")){
                    String tmpName=fileName;
                    if( inputstream != null)
                              tmpName = makeAttachment(fileName,inputstream);
                    messageBodyPart = new MimeBodyPart();
                    DataSource source = new FileDataSource(tmpName);
                    messageBodyPart.setDataHandler(new DataHandler(source));
                    fileName = fileName.replace('\\', '/');
                    fileName = fileName.substring(fileName.lastIndexOf('/') + 1,
                              fileName.length());
                    messageBodyPart.setFileName(fileName);
                    multipart.addBodyPart(messageBodyPart);

First, when sending your message, the filename should be a simple
filename, not containing any directory names.
It sounds like your mail server might be doing some special
processing of attachments, perhaps to prevent viruses.

Just bot to conver to Word. All I get is invite to purchase again. email links DO NOT WORK!

HOW DO I GET STARTED? I JUST BOUGHT TO CONVERT PDF TO WORD. ALL I GET IS INVITE TO PURCHASE AGAIN. EMAIL LINKS DO NOT WORK!

Reply from Keygames.
Hi David,
It is a problem with the website. We are working on a solution.
Best is to go to http://spele.nl for the time being.
Best regards,
Lorenzo
Date: Sun, 17 Nov 2013 01:43:55 -0800
From: [email protected]
To: [email protected]
Subject: Unable to play flash games. All I get is a white box. Does anyone have a solution?
Re: Unable to play flash games. All I get is a white box. Does anyone have a solution?
created by Pat Willener in Installing Flash Player - View the full discussion

HI,Have 10.10.3 version email system does not work at all it display emails up to the installation of the new version, no incoming or outgoing emails

HI,
Have 10.10.3 imac version- email system does not work at all it display emails up to the installation of the new version, no incoming or outgoing emails

That helped thanks-
I was able to solve this by deleting all "Envelop Index*"- and "ExternalUpdates*"-files in ~/Library/Mail/v2/MailData. After that I restarted Mail and let it reindex all mailboxes.

Email notification mail not working in case of customer repository

Hi Experts,
We have the system MDM 7.1 SP06, we are not able to get the email notification for customer repository. For other repositories like material & vendor mails are working fine. I Have checked the following steps.
1) Added notification step to the workflow between processes.
2) Verified the email addresses of the workflow owner and the receiver of the notification.
3) Verified that the mds.ini has the "MailServer=" setup to the right smtp.
I have check in workflow history, it is showing notify step but not showing details of mail like send to, mail body. While in case of material repository, it was showing complete details like send to, mail body & all.
Previously mails for customers were working fine. Kindly suggest the solution.
Regards,
Gaurang

Hi Gaurang,
Are the time parameter same for all the repositories?
Create a dummy user and dummy workflow,and try to send mail from that workflow.
If this works with some id then check with the Admin id which you are using.
This way you can eliminate the possibility of id not working.Also it will tell you that user is corrupt or not.
Check for log and traces,kindly provide with the post here.
Thanks,
Ravi

Email body could not be downloaded

I have an email account configurated on my Q10.
The account type is Exchange ActiveSync.
everything worked fine until a few days ago.
Now when I want to see the body of a message I get this error
message body could not be downloaded
I try to remove and reinstall account but the problem is the same.
Paolo

i have the same " download error " but with BBM invites

HT204187 Email account does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.

Inbound email configuration is not working in SAP CRM 7.0

We have issue with the Inbound mail in SAP CRM 7.0, the emails from external ID (eg *@gmail.com) unable to receive in SAP Mailbox.
SMTP Settings as per the note : 455140 have been done and its working fine, we are able to send email from SAP to external server.
Also as per the note 607108 telnet test was successful and we can see the email in SOIN,
However if we send a mail from Gmail to SAP it is not visible in SOIN and it is bouncing back with error
said: 553 5.1.8 <[email protected]>... Domain of sender address
[email protected] does not exist (in reply to MAIL FROM command)
I have attached screenshot of the SOIN.

Hi Garcia,
I have checked with the Network team who manages Exchange server and they have mentioned that it is bouncing back from our CRM host with the error as below,
said: 553 5.1.8 <[email protected]>... Domain of sender address
[email protected] does not exist (in reply to MAIL FROM command)
Regards,
Arpit

Droid Mini notifications for email and text not working

I am having a problem with notification sounds not working for email and text messages with my Droid Mini. I took my original phone to the Verizon shop. They did a factory reset. Sound worked for two days. Went back to Verizon and they reset it again. But they did tell me if it happened again to call Verizon and they would send me a new phone. Well it happened again. Got my new phone just last week. Well yesterday and today the sound notifications for text messages and email is not working on the new phone. Last night I powered the phone off and back on and all was working well until this morning.
This is very upsetting as I really do like this phone. Would like to know what is going on with it. Have checked all the volumes and they are all up.
Is there a fix for this.
Thank you.
Barbara
Edited to start new discussion and private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

For Gmail it is: open Gmail > menu > settings > your gmail address > notifications check box is unchecked.
There are some additional notification options for labels too.

Email and BBM not working

Hi,
My email services and Blackberry messenger are still not working, despite the fact that the disruptions of last week have apparently been fixed. However, I am able to access the internet.
On the setup menu it says that there are two email accounts, but when I click on it, it says that there are no activated accounts and there is only the option for enterprise activation. The Blackberry and 3G sign at the top of the screen are present and in capitals. I have tried pulling out the battery and rebooting. I have re-registered with the host routing table. I have also called my carrier (t-mobile), who have said it is not a problem with them.
It's been over a week now that my phone hasn't been functioning properly. Can someone please help?
Thanks

Hi and Welcome to the Community!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! But, I am distressed by one thing...
s-k wrote:
I have also called my carrier (t-mobile), who have said it is not a problem with them.
For them to successfully fob you off that way is, IMHO, inexcusable. Regardless of where the root of the problem is (e.g., the RIM network or the carrier network), your carrier remains responsible for ALL of your services and support. After all, you pay them every month for your services...they are not delivering those services. Only they have the ability to seek for you any support from RIM...you have no direct channel to RIM...only via escalation from TM can you get support from RIM. It is so sad that so many CSR's at carriers are responding like this and fobbing their paying customers off. I encourage you to ring them back up and impress upon them that your service and support contract is with them...and they are responsible for providing that support and service, including escalation into RIM if necessary.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Email notifications are not working anymore

Hi guys,
I use Grid Control 10.2.0.2 on Windows, and email notifications for critical alerts are not working anymore.
I didn't change anything to the OMS configuration, it just stopped one day, and when I ask for a test email (in "Setup -> Notifications methods" of in "Preferences") it is successfully delivered.
I didn't find anything related to this in log files, and nothing that could help here or on metalink.
Can anyone help about that weird issue ??
thanks in advance
Antoine

Have you gone back over your notification rules?
have you tried just creating a new notification rule and testing it?
Also take a look at Note:356774.1. If you've applied any patches (or done partition maintenance) you may have inadvertently lost all your jobs, which will break the email notications.
If still no joy, then try Note:285093.1.
let us know how you get on.

Office Jet Pro 8600 Plus Scan to Email Setup, website not working.

When setting up scan to email.
The first question is: Is the HP software provided with the printer installed on the network-connected computer?
The answer should be yes, but we can't follow the steps of opening up the software on the computer and acessing scanner options like the printer tells us to.
Anyway, in the past I have set up a two users by selecting "No" to this question then it provies me with a website to enter in:
http://192.168.5.158
This is the current address it is giving me. This has worked for me in the past and have had no issues setting it up this way. But now (after my employer changed my email address) my scan to email is no longer working and I am trying to set it up again with my new email.
Every time I type in the given address: http//192.168.5.158 I receive an error message.
[Fiddler] The socket connection to 192.168.5.158 failed.
ErrorCode: 10060.
A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.5.158:80
I had found a forum that had supposedly been a solution where they said to remove web services on the printer and re-set it up, this did not work at all. Still can't set up a scan to email. I just want to use the site given like I normally do, and set it up that way, I need help as SOON as possible please

Hello rachelhuver,
Welcome to the HP Support Forums!
Regarding the issue connecting to the Officejet Pro 8600 Plus's Embedded Web Server to change the Email used for Scan to Email, I would like to see if I can help.
If you touch the Wireless icon on the printer, is the I.P address the same as you noted in your post? If not, use that I.P in an attempt to access the needed page.
If you are still unable to load the page, try using a different web browser on the computer. For example, if using IE, try Firefox.
If you are still unable, it would appear to me that the network is blocking this page from you. You can get around this by connecting temporarily to the printers Wireless Direct network. To connect to this;
Touch Setup
Network
Wireless Direct
On with no security (I suggest)
Connect the computer to the printer's network, ie HP-Print-**-Officejet 8600 series.
Open a web browser (don't worry if you get a message about no Internet), enter this I.P: 192.168.223.1 and hit Enter.
You should now be able to access the Embedded Web Server of the printer, make your changes and apply them.
Hope this helps,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Incoming email Settings is not working

I have configured Incoming Email Settings by using msdn link
http://technet.microsoft.com/en-us/library/cc262947(v=office.15).aspx#ConfigureDropFolderPerms .I cannot recieve emails in my document library ,mailroot/drop folder is empty.I am not able to trace issue.Please suggest

Hi Refer thhe links
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3d27cfd7-d4cd-4fb8-9899-d30bc7764a27/incoming-email-settings-not-working
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3d27cfd7-d4cd-4fb8-9899-d30bc7764a27/incoming-email-settings-not-working?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c0e39e97-9113-4de8-9b72-137c594a4dfe/incoming-email-settings?forum=sharepointgeneralprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c3beaade-056b-48d2-8063-f4dabe60ff70/cant-get-incoming-email-settings-to-work?forum=sharepointadminlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you

Email in photos not working in iPad 2

Email in iPad 2 not working , any one help me

Have you tried closing the Photos and Mail apps completely ? From the home screen (i.e. not with the Photos or Mail apps 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Photos and Mail apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Email body is not working

Similar Messages

Maybe you are looking for