Email BPC data manager Package log to a team for BPC10 NW

Hi iI found documentation on how to send Data manager package by email. Contained 2 transports but the documentation is for 7.0 NW do you know if they have a documentation for BPC 10 NW ?

Hi Frederic,
Please check the below documnet.
How to Email BPC Data Manager- Formula Log or Package Log
Thanks,
Dinesh.v

Similar Messages

How to write custom messages to Data Manager package log from within SSIS?

Just wonder in BPC 7.0/7.5 MS how do you write custom messages to Data Manager package log from within SSIS? I mean I want to log output of specific custom tasks (non-BPC) in SSIS control flow to the resultant BPC package log created when running SSIS package in Data Manager. Can this be done in a Script Task or some other way? Not much documentation out there on this.
Thanks,
Brian

Hi Brian
In order to achieve what you want, it can get tricky in your package, ultimately It would depend on the task, for example if you had an execute SQL task, you could use a RAISEERROR command in your SQL statement and BPC would return the error message that you specified.
If you had other tasks, then it would be a bit more tricky, you would have to have custom messages based on event handlers.
Please see below links for examples :
[Custom messages for logging|http://msdn.microsoft.com/en-us/library/ms345174.aspx]
[Custom Logging Using Event Handlers |http://consultingblogs.emc.com/jamiethomson/archive/2005/06/11/SSIS_3A00_-Custom-Logging-Using-Event-Handlers.aspx]
Hope this helps
Kind Regards
Daniel

Data manager package log does not show Global variables!!

Hello Experts,
We are using BPC 10 sp14 Microsoft version with SQL Server 2008 R2. We are seeing an issue where datamanager package log does not show the Global variables defined in package script whereas in BPC 7.5 Global variable were visible in package log.
Please let us know is this behavior changed in BPC 10?
Below is the package script having Global variables and Package log not showing any of them.
Thanks & Regards,
Rohit
Package Script:
Package Log:

Hi Ergin,
As far as I remember it's by design...
Vadim

Custom log of rejects in BPC data manager package

dear All
we have custom package which loads records from flat file.
The package is using a stored procedure for all calculations and log errors..
The error codes are logged for duplicates, invalid member IDs..
When we tested for small number of records, the log used to display in package view status.
But if there are huge number of reccords we were unable to display log in the pacakge status. Is there any limitation?
the error log file ranging from 8Mb to 25MB.
Please advise.
BPC 7.5 MS version.
regards
Prasad

hi Roberto
thanks for your reply.
yes i am trying to display the log file of private publications only. it consists of rejects with custom logs.
this is requirement from client, they wantrd to see in package view status itself.. so is why we got stuck
during testing it was able to display but during uat there were huge rejects where it wasnot able display anthing.
is there any sap note so that I can share to client,n or specifications of sap?
any workaround please advise
regards
Prasad

NEW TO SAP BPC - Advice on Data Management Packages

Hi,
I am an experienced Microsoft BI User, but am new to SAP BPC.
I am working on a project that has required me to create custom SSIS packages for my client. To date my packages transform / cleanse and format the source into a clean CSV file, that requires no further intervention from the user, other than to use the standard SAP BPC Import Routine, with a simple Transformation file.
In order to fully automate the process, I would like my Custom package to automatically invoke the Standard import package without any user based intervention.
Can anyone advise on this?
I have considered writing further logic in my custom package that would completely bypass SAP BPC Data Manager, and insert the information direclty into the Fact Tables, taking into consideration any members that don't exist in the Dimensions. However, I would prefer not to go down this route unless absolutely necessary.
Can anyone point me in the right direction, so that I can call a clear routine from within my custom package, that would invoke a SAP BPC package /task to clear certain data from the fact table, and then call another Package / task that would update the Fact table based on a fully prepared csv file.
Many thanks

You could modify your custom package to perform all the steps thru BPC import and have the user initiate the Package from the BPC Data Manager. You would just need to add a MODIFYSCRIPT variable (see the standard IMPORT package as an example) and add the BPC tasks required to Convert/Load that data your package already prepares.
I have had prior success having a custom package initiated from within the BPC Data Manager extract data from an external data source (ie: Oracle), use user provided runtime input to customize data extraction parameters, manipulate the extracted data, and import it into BPC.
Unfortunately I've never attempted to initiate a BPC task without the package being initiated from within BPC. But I would surmise that if you provide the proper values for the individual BPC Tasks (ie: Convert and Load) required properties (ie: AppSet, App, User,...), I cannot think why it would not work.

Data Manager Package Error in SAP BPC 10

Hi All,
I am getting below error message while running the Data manager package /CPMB/LOAD_INFOPROVIDER in SAP BPC 10. Screenshot is attached for your reference. Please help in solving this issue.
Thanks & Regards,
Ramesh.

Hi Vadim,
Please find the Advanced DM Script of Copy Package.
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,%TARGETMODE%)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)
Thanks & Regards,
Ramesh.

Preview transformation file in data manager package

Dear BPC Experts,
When we try to preview Tranformation file while running data manager package to import transaction data from BW, we are getting following error. We do not get this error if we use load from flat file package.
We are on BPC 10 PS06, EPM Add-in SP14 patch3.
Has anybody seen this issue before? We can paste the entire log if required.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentException: Separator cannot be null and must contain only one char
Parameter name: separator
   at FPMXLClient.DataManager.CsvParser.Parse(String data, String separator, Boolean hasHeader) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\DataManager\CsvParser.cs:line 15
   at FPMXLClient.DataManager.UI.Forms.FilePreview.BuildDataArrayFromCsv(String data) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 487
   at FPMXLClient.DataManager.UI.Forms.FilePreview.BuildDataArray(String data, Boolean formatted) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 414
   at FPMXLClient.DataManager.UI.Forms.FilePreview.SpecialFilesProcessing() in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 406
   at FPMXLClient.DataManager.UI.Forms.FilePreview.DisplayData() in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 351
   at FPMXLClient.DataManager.UI.Forms.FilePreview.InitializePreview() in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 102
   at FPMXLClient.DataManager.UI.Forms.FilePreview.FilePreview_Load(Object sender, EventArgs e) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 740
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at FPMXLClient.UILayer.Forms.BaseForm.OnLoad(EventArgs e) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\UI\Forms\Base\BaseForm.cs:line 70
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Best Regards,
Ashwin.

Hi Raju,
Thank you for your reply.
It seems that it is SP related issue. When we downgrade our EPM Add-in to SP13 patch4, it did not throw any error.
Best Regards,
Ashwin.

Change of sign when running the data management package

Hi All,
I have written a script logic for copying my Budget member under category dimension to say another member say "XYZ" under category dimension and this is for my Member Sales under ACcount dimension having acctype as inc.
When i run the logic thru default i am getting the correct value. however if i run the same thru data manager package- my sign changes.
Eg. 100000 is copied as -100000 and -50000 is copied as 50000.
Please help me out
Regards
Navin

Hi Navin,
CREDITPOSITIVE= YES | NO
Default: YES
If No, all amounts referring to an ACCOUNT type (LEQ, INC) will have their signs reversed.
Since you are referring to the member account sales as INC the default logic considers the sign as reversed.
Please look at this link which helps you to understand
Significance of Account Type EXP,LEQ,INC,AST in BPC- Need some valid reason
Hope this helps.
Regards,
Sanjeev

Error while running data manager package

Hi All,
when i am running data manager package for currency conversion i am getting the following error
"An exception with the type CX_SY_CREATE_DATA_ERROR occurred, but was neither handled locally, nor declared in a RAISING clause
The data object could not be created: The type /B28/MHED7W9U does not exist."
Plase suggest where i am making mistake.
Thanks

Below are our BPC versions:
BPC on Server Manager: 5.0.486
Data Manager from eData: 5.0.484
BPC from eTool: 5.0.486
Below is the total error message as per your suggestion to run Export package. (even with service account which we used to install the software we are getting same error message.)
TOTAL STEPS 2
1. Dump Data: Failed in 0 sec.
[Selection]
FILE=\ApShell_SK\FINANCE\DataManager\DataFiles\SKTEST.TXT
TRANSFORMATION=\ApShell_SK\FINANCE\DataManager\TransformationFiles\System Files\Export.xls
MEASURENAME=PERIODIC
(Member Selection)
Category: ACTUAL
Time: 2006.JAN
Entity:
Account:
DataSrc:
IntCo:
RptCurrency:
[Messages]
An error occurred while executing a package.
Package Error Events:
ErrorCode = -1073668060
Source = Dump Data
SubComponent=
Description = The task "Dump Data" cannot run on this edition of Integration Services. It requires a higher level edition.
IDOfInterfaceWithError= {8BDFE889-E9D8-4D23-9739-DA807BCDC2AC}

Default File Selection while Running Data Manager Package

Hi BPC Experts,
What i wanted to know is that is possible to make a file selection as "Default" for running a data manager package.Say for example i wanted to run a simple DMP "Load Transaction data from from BW InfoProvider UI" and the file that i always select is "ZFIGL010" for this is it possible to get "ZFIGL010" file as pre-populated (or pre-selected)instead user going and choosing from long list of files available "Info Provider Selection".
Thanks
Rahul

Rahul,
As Ashish said you cant get rid of the info provider name selection as you are using the /CPMB/LOAD_INFOPROV_UI pkg. But if you use /CPMB/LOAD_INFOPROVIDER package you can follow the below steps to get rid of the selection.
Comment the below prompt statement in the Advance script of the pkg which asks you to select the Info provider.Its the first statement of the script. You can comment by putting a ' before begining of the statement.
PROMPT(TEXT,%InforProvide%,"Please enter InfoProvider to download data",)
Add a INFO statement and pass the same INFO statement to the Task. Please refer to image below.
Regards
Nikhil

BPC10 - Data manager package for dimension data export and import

Dear BPC Expers,
Need your help.
I am trying to set up a data manager package for first time to export dimension - master data from one application and import in another application ( both have same properties) .
I created a test data manager package from Organize > add package > with process chain /CPMB/EXPORT_MD_TO_FILE and Add
In the advance tab of each task there are some script logic already populated. please find attached the details of the script logic written under each of the tasks like MD_Source, concvert and target .
I have not done any chnages in the script inside the task .
But when i run the package , I have selected a dimension 'Entity' but in second prompt ,it ask for a transformation file , and syatem autometically add the file ... \ROOT\WEBFOLDERS\COLPAL\FINANCE\DATAMANAGER\TRANSFORMATIONFILES\Import.xls
I have not changed anything there
in the next prmpt , it ask for a output file ..and it won't allow me enter the file name .....i
Not sure how to proceed further.
I shall be greatfull if someone guide me from your experiance how to set up a simple the data manager package for master data export from dimension . Should I update the transformation file in the script for import file and output file in the advance tab. how and what transformation file to be created and link to the data manager package for export / import .
What are the steps to be executed to run the package for exporting master data from dimension and import it another application .
Thanks in advance for your guidance.
Thanks and Regards,
Ramanuj
=====================================================================================================
Detals of the task
Task : APPL_MD-SOURCE
(DIMENSIONMEMBER, %DIMENSIONMEMBERS%, "Please select dimension", "Please select members", %DIMS%)
(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
(RADIOBUTTON,%ADDITIONINFO%,"Add other information(Environment,Model,User,Time)?",1,{"Yes","No"},{"1","0"})
(%TEMPNO1%,%INCREASENO%)
(%TEMPNO2%,%INCREASENO%)
(/CPMB/APPL_MD_SOURCE,SELECTION,%DIMENSIONMEMBERS%)
(/CPMB/APPL_MD_SOURCE,OUTPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,INPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
(/CPMB/EXPORT_MD_CONVERT,SUSER,%USER%)
(/CPMB/EXPORT_MD_CONVERT,SAPPSET,%APPSET%)
(/CPMB/EXPORT_MD_CONVERT,SAPP,%APP%)
(/CPMB/EXPORT_MD_CONVERT,OUTPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,INPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,FULLFILENAME,%FILE%))
(/CPMB/FILE_TARGET,ADDITIONALINFO,%ADDITIONINFO%))
Task : EXPORT_MD_CONVERT
(DIMENSIONMEMBER, %DIMENSIONMEMBERS%, "Please select dimension", "Please select members", %DIMS%)
(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
(RADIOBUTTON,%ADDITIONINFO%,"Add other information(Environment,Model,User,Time)?",1,{"Yes","No"},{"1","0"})
(%TEMPNO1%,%INCREASENO%)
(%TEMPNO2%,%INCREASENO%)
(/CPMB/APPL_MD_SOURCE,SELECTION,%DIMENSIONMEMBERS%)
(/CPMB/APPL_MD_SOURCE,OUTPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,INPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
(/CPMB/EXPORT_MD_CONVERT,SUSER,%USER%)
(/CPMB/EXPORT_MD_CONVERT,SAPPSET,%APPSET%)
(/CPMB/EXPORT_MD_CONVERT,SAPP,%APP%)
(/CPMB/EXPORT_MD_CONVERT,OUTPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,INPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,FULLFILENAME,%FILE%))
(/CPMB/FILE_TARGET,ADDITIONALINFO,%ADDITIONINFO%))
Task : FILE_TARGET
(DIMENSIONMEMBER, %DIMENSIONMEMBERS%, "Please select dimension", "Please select members", %DIMS%)
(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
(OUTFILE,,"Please enter an output file",Data files (*.txt)|*.txt|All files(*.*)|*.*)
(RADIOBUTTON,%ADDITIONINFO%,"Add other information(Environment,Model,User,Time)?",1,{"Yes","No"},{"1","0"})
(%TEMPNO1%,%INCREASENO%)
(%TEMPNO2%,%INCREASENO%)
(/CPMB/APPL_MD_SOURCE,SELECTION,%DIMENSIONMEMBERS%)
(/CPMB/APPL_MD_SOURCE,OUTPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,INPUTNO,%TEMPNO1%)
(/CPMB/EXPORT_MD_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
(/CPMB/EXPORT_MD_CONVERT,SUSER,%USER%)
(/CPMB/EXPORT_MD_CONVERT,SAPPSET,%APPSET%)
(/CPMB/EXPORT_MD_CONVERT,SAPP,%APP%)
(/CPMB/EXPORT_MD_CONVERT,OUTPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,INPUTNO,%TEMPNO2%)
(/CPMB/FILE_TARGET,FULLFILENAME,%FILE%))
(/CPMB/FILE_TARGET,ADDITIONALINFO,%ADDITIONINFO%))
================================================================================

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

Scheduling a data Manager Package

Hi,
Please le t me know how to schedule the Data manager package from BPC Client.
I tried th option in Data Manager Package "Schedule" but is not repeating the job. It just run once and stop.
Anurodh

Hello,
Please check the schedule for the InfoProvider you are using. You can check this within transaction code RSA1. There may not be a schedule that was created to load data. Please verify that this is or not the case. Thanks.
Regards,
Jason

Data manager package

Hi Guru,s
How stop a data manager package which runs for many hours and creating very big debug file in temp file PRIVATEPUBLICATIONS\USERname\TempFiles.We running script logic through the Package.There 3 files which are keep increasing as the time progress.
Regards
Buggi
Edited by: Buggi9 on Sep 9, 2011 5:32 PM

You can kill all of them as long as no one else is using the system.
The processes restart (are invoked) automatically when user's log back into the system.
If you want to really focus on which DLLHOST.EXE to kill then do this:
Open Component Services (RUN menu DCOMCNFG)
Click on the Running Processes folder under Component Services --> Computers --> My Computer
You'll see a bunch of COM+ objects with a process ID (PID) associated with each object.
Look for the K2Processing and Everest Update processes and take note of the process ID's
Now look for those process ID's in Task Manager (PID) and only kill those processes.
Goodluck,
John

Copying the data manager package

HI All,
In BPC, I need the contents and packages of my data manager package to be copied from my production server to Testing server.(I want the entire contents in there, to be copied.)
Can anyone suggest me, how can i do that??

Hi,
I meant that you need to go the path:
<installation folder>\Data\Wefolders\appsetname\appname\datamanager\packagefiles
You will be able to see your package file, here. You can copy it and then paste it on the same path in the target server.
Hope this helps.

Customize Data Manager Package

Hi
m new to sap bpc nw version.Can anybody help me for the following issue
1)I want to copy data from one sorce member to multiple destination members. I have used Copy Data Manager Package in BPC NW Version,but its not allowing me to select multiple members of a dimension n the destination.The "Next" option itself is getting disabled.The same was enabled in MS Version.
How can I customize Data Manager Package to get Multiple Selections?

As "Copy" is predefined BPC DM package ,this DM package can not be customized. Copy wizard wont allow if source & destination members are of different count . If destination members are less , then you can run Copy package multiple times. If destination members are more , you can try creating simple script logic to copy .
Edited by: pkrishnas on Oct 27, 2011 5:49 PM

Email BPC data manager Package log to a team for BPC10 NW

Similar Messages

Maybe you are looking for