EMail Bursting of Web Template - no Texts are shown!

Dear experts,
on using eMail Bursting for a web template the eMail with the attached PDF is send.
Unfortunately no texts form the Web Template are send - only the query results....
is there a setting where to ensure thatl also texts (Headers and additional information) from the web template is included in the bursted PDF document?
Thanks,
Angie

Hi Angie,
By Default,whenever you broadcast(or Export),it will take only the Query Output(which means the Analysis item).So you place a Info Field item,and then assign it to the Data Provider and then Broadcast it.
Now you will get an output with the data along with the Text in the InfoField item.
Rgds,
Murali

Similar Messages

Mail from Web Template : body text

Hello,
i created a button in my web template so that users can send a mail to confirm they have checked this months data. Nothing to fancy about it (not getting dynamicaly the variable values just some fixed text).
This is the code i used:
<FORM action="mailto:[email protected]
     ?subject=I have checked and approve the data for this month
      &body=Best regards"
      method=post encType=text/plain>
<INPUT type=submit value="I have checked and approve the data for this month">
</FORM>
This works fine.
Now my question : i want to have multiple lines in my body and i can't get thjis working (logic since i don't know much of HTML ). Anybody any suggestions?
Thanks in advance for your help!

Hi Tom,
One small change whatever you are writing in
Value="....."
This Text will come on Button.
So as explained earlier if you want more text on button you can do that.
If you want more text in body than I think simply you can use
<FORM action="mailto:[email protected]     ?subject=I have checked and approve the data for this month      &body=Best regards \n Tom"
i.e. use "\n".
Hope this helps.
Regards,
Ashish

Performance of Web Templates Apps that are created in Web App Designer

I have created a Dashboard using Web App Designer in BI7 SPS 10.
The Web Template has 12 queries/DataProviders that are used for 12 charts. Buttons at the top control the view to show 4 Charts Each. When these buttons are selected, command sequences are executed that Hide and Show containers (each chart has its own container).
Also, there are 8 Dropdowns which are used to filter all 12 charts. These Dropdowns are using Posted Values because the requirement is to only show the values that actually exist in the InfoProvider.
When this template is run in Development where the data is minimal, it is taking 17 seconds to load the page. When running each query individually, it is taking each query between less than 1 second or at most 1.5 seconds. Also, the queries have been broadcasted to the OLAP Cache.
Other approaches that I have tried but have not changed the performance:
1. Created this template with Tabs and each template calls a template which contains 4 of the Charts (I believe this is called the Template in Template Approach.
2. Created 3 templates that each contain 4 of the Charts. The Command Sequence Change Template" is used to switch to another Template (e.g. from Monthly Trends to Top 10 and retain/pass the filters that are already selected in the Dropdowns. However all of the dataproviders are needed in each template in order to pass the filter values. Therefore, all 12 queries are executing when you load the main page.
I am looking for suggestions on what I could do differently to speed up the performance to get the Dashboard to respond within 10 seconds.
Thank You.

Dear Kristen,
well, one of the things that I do remember, a solution that we provided for a similar scenario, but, not exactly the same. Another difference is that it was in BW 3.5.
We had few reports that was responding slow. There were reports that was viewed by both sr. managers as well by his team. Sr. Mgr looked only at the high level data while the team looked at the item level data in the same report. So, we provided two links in the same report. Initially it will come up with a static data. To get a detailed data, the user has to click the next link to view item level data.
Now, how this works is through Reporting Agent. The first static data was provided as a cache(pre-calculated) hence, faster. It comes in just 2 secs. But, when the user needs a item level data, he clicks the lik provided, only in which case, it fetches data from the infoprovider(hybrid mode).
We will need to schedule periodically, accordingly, to refresh the cache to provide faster data.
Iam really not sure how far this will help you, but, can spark something( I hope!).
Thanks

French web templates? What are the chances?

Salut,
I'd like to export a web with the default text appearing in French. I have manually changed the text on the various index pages manually in Dreamweaver, but I don't have the heart to open each of the large photo html pages to translate the "Previous Index Next" text.
So 2 questions:
1. Might there be a French Lightroom template out there somewhere? OR
2. Is there a real easy way to translate these large photo pages? A master page or something?
You can probably guess that my html skills are really really limited. Merci! Marcel

Thanks, John. Sent this off to do as a General Web TIP for the
LR Extras.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core, Pentax *ist D
http://donricklin.blogspot.com/

Overlap of texts in web page when texts are enlarged

When I display a webpage with texts in boxes, and I press Command + to increase the display size of the texts, usually the surrounding box also expands or adjusts to accommodation the larger texts. But when I press Command + again, then the texts from adjacent boxes start to overlap.
A similar thing also happens with Firefox, except that I can press Command + a few more times before the texts start to overlap.
Is there any preference in Safari that I can adjust to delay the overlapping of texts?

Try
http://au.yahoo.com/
In Safari, as soon as I press Command + twice, then the texts in the top right corner about Mail and Weather start to overlap.
But in Firefox, even after I press Command + 8 times to zoom to the maximum, everything stays in proportion without any overlap of texts.

Safari finds web pages but pages are shown grey and they are not active...

... It is not possible to choose any links and fields at opened web pages or scroll them. Safari icons in the upper left corner dont work i.e. it is not possible to close or choose from opened web pages or bookmarks. It is only possible to write to www-addres field or Google-field.
What should I do? Other applications work fine.

Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Or ....Quit the app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Or ....Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Multiple web templates in one Email.

Hi Experts,
Is there a way by which multiple web templates can be sent over a single email.
These web templates must be attached as PDFs to a single mail.
Pointers will be of immense help.
Thanks & Regards,
Rahul R Nair
I am thinking of creating an ABAP program to convert web templates to PDF and store them in an AL11 directory. Then pick up these files while sending a mail via function module.
Can this be possible? Is there a function module to create a PDF file from a web template?

Hey Rahul,
Yes develop your ABAP program for the same.
Can you tell me the exact scnerio.
I have good ABAP code for the same give me your ID will send u may be its help u
I developed that code for email via web and PDF
i am not sure on your last issue web to pdf i think its not possible
Regards
Ankit

Changes to BI web templates are not updated

Hello BI Experts,
I need to find a way to advise my portal resource on how to resolve a problem we are experiencing.
When we make a change to a web template, the changes are not updated and it appears that the old version is cached. The only way we can get the new template to show is to bounce EP.
Does anyone have suggestions where we can find the appropriate global settings to set the cache so that EP will retrieve new BI content as it is modified?
Thanks in advance for any help.
Tom

Hi Tom,
If there is some incorrect setting in the portal, the WAD templates does not get saved after the first Save action.
I am not sure of the setting which needs to be done. But I can provide you an alternate solution. If there is no other issue than the templates not getting saved, you can use this.
You can save your changed template using 'Save As' in a different name and then you can delete the original template. Afterwards, you can save this template with the actual name.
I hope this would solve your problem.
Regards,
-Neethu

Long Query Runtime/Web-template Loading time

Hi,
We are having a very critical performance issue, i.e. long query runtime, which is certainly not acceptable by client as well.
<b>Background Information</b>
We are using web application designer (WAD) 2004s release to design front end of our reports built in BI 7.0 system.
<b>Problem Area</b>
Loading of web template on browser
<b>Problem Analysis</b>
Query taking so long time to run, whenever we load it through portal or even directly through web application designer. Current runtime for query is more than a min. And I have noticed that 95% of runtime is taken for loading variable screen. FYI if I run query through Query Designer or BEx Analyzer, it takes 3-5 seconds to execute.
We have taken all the statistics and everything proves that query is not taking any time to execute but its the loading time which creates bottle neck.
<b>Possible Cause</b>
Web template holding 11 data providers, 5 of which are based on queries and rest are on query views. These data providers load into memory in parallel which could cause delay.
These data providers expose detailed variable screens. Out of 21 input fields, exposed by web template, 8 fields are based on hierarchy node variables and 1 on hierarchy variable. And to my knowledge each time hierarchy/hierarchy node variable loads complete hierarchy into memory whenever they are called (in other words, its not performance efficient to use hierarchies).
I request you to please consider this as matter of high priority and provide me with suggestions to remove bottle necks and make the application performance efficient. Please let me know, if you need any further information.
Thanks.
Shabbar

I would recommend you see how long the query execution actually takes without running from the web template. If actually the individual query takes long time then you need to do some performance improvement on back-end side (aggregates, indexing,... and so on).
But the performance issue is only with web templates, then you need to find some notes on it, because, I remember we had to apply some notes in relations of browser taking too long time to load the selection screen in web reports.
After exhausting all the option, then I will implement precalculating the query result before hand using broadcaster.
thanks.
Wond

Different Web Template selection based on query selection values entered

Dear Experts,
We have a very unique requirement in our BI7 system.
There is a web report which comprises of multiple queries and query views embedded in web templates. There are 2 selection parameters F1 and F2 that appear on executing the report.
Our requirement is to display a unique web template to the user based upon his selections. If user enters values for both the fields F1 and F2 then we want to display report output from query views in web template T1.
If user enters value for only field F1 and keeps F2 value blank, then we want to display report output from query views in web template T2.
The problem we are facing is to decide the appropriate place where this type of condition could be coded. We do not think user exit would do the job here.
Please help if you can.
Regards
XX

Hi Pravin,
Thanks for the reply.
Let me please clarify my problem further.
Web Template T1 --> Query Views V1, V2, V3.
(All query views V1, V2, V3 have variables on fields F1 and F2).
Web Template T2 --> Same Query Views V1, V2, V3.
(All query views V1, V2, V3 have variables on fields F1 and F2 but this time variables would be having different values than above).
If user enters values for both fields F1 and F2, then we want to display Template T1 with F1 variable = "value by user" and F2 variable = "value by user".
If user enters value for only field F1, then we want to display Template T2 with F1 variable = "value by user" and F2 variable = "all values for which transaction data exist".
Thus, we want to display a unique web template based on whether the value of F2 is entered by user or not.
Please let me know if you need any further clarification.
Thanks

Turning XML/XSLT files into a working Web Template

I've scoured these and other forums for this small piece of information, so I apologize if it's been answered already, but I can't find it.
I understand that the web templates in Lightroom are done in XML/XSLT, with the XML file named galleryMaker.xml and the XSLT file named transformer.xslt. However, I cannot figure out how to get these files to show up as a template in Lightroom.
I am on a Windows XP machine, and all the templates show up in Application Data/Lightroom/Web Templates, but they are all of the type *.lrtemplate. Is there a way to convert the XML/XSLT set of files into an lrtemplate file? Or is there something else I'm supposed to do?

Splatt42 wrote:
I have an executable binary program (that runs just fine on it's own) that I needed to turn into a service (call it "foo"). I did so using the .xml file below, and it does indeed start up at boot, runs in the background,When you run your program (/usr/bin/foo), does it daemonize itself (kind of like running /usr/sbin/sshd), or would you have to do it yourself if run from the shell ('/usr/bin/foo &')?
and does everything it should. I've noticed a couple of problems, though. If I execute an init 0, the system hangs and never gets to the OK prompt. If I disable my service, an init 0 completes without any problems. An init 5 works OK, as does a shutdown from the desktop. I'm not sure what could be causing this. I thought maybe because the service was restarted over and over again...?
I gave my service a timeout value of "0", as I found that when I gave it any other value the service stopped running when the timeout expired. A seeming side effect is that my service is never listed as running, as it's start method (itself) hasn't yet completed.The manifest doesn't really want your binary as the start method. It wants to run something that starts the service, and will exit with status 0 if the startup was successful, and non-zero if the startup was unsuccessful. So you might want to write a small wrapper script (like an init.d startup script).
Take a look at the sshd.xml manifest. It doesn't start sshd, it runs '/lib/svc/method/sshd start', which is responsible for starting sshd.
Darren

Problem with Web Template

Hi,
We are facing some problem in WAD.
We have developed some reports based on views and as well on queries.
As per our requirement we merged all the reports in a Standard web Template, and we are using table and graph as web items for the template, here the user can select any report becoz we have query selection option, then it will display the particular report. But we are getting the problem with the Template.
While publishing the template we will get three tabs 1.DATA ANALYSIS, 2. GRAPHICAL DISPLAY 3.INFORMATION. in the initial screen that means in the DATA ANALYSIS tab it should display only the table, but in our case it is displaying both table and graph.
And also if you select graphical tab then that should highlight the particular tab and with the particular graph, but the tabs is not highlighting when you selecting that.
If you have any solutions please let us know.
Regards,
Nossum Chandu.

Hi
I have having almost similar problem. The difference is that it is other way around.
The problem is from Development server instead from production. I am not using slandered template.
I have done following but fail to resolve it-
1) Loading templates using WAD gives inconsistency error. Object "...." is inconsistent.
Recalling query in QD returns following two errors "BEx transport request is not available or not suitable 0", "Choose an existing request 0"
2) While running the query using TX RSRT2 (Query Monitor support package X), returns error "An error has occurred in the script of this page" Line 11039, Char 1, Error Access is denied and so on...
3) ICM ok, Services are checked.
4) SM50 log does not give any clues
5) There is no URL issue.
6) BW Functionalities are active.
Could some suggest?
Thanks in advance

Text Elements in Web Template

Hello.
In my web template I wish to display the Variable Values and also the last time the query was changed (MODTIME) + ROLLUPTIME...
This seems to be tricky, because if I check the SHOW_VARIABLES option, and include MODTIME and ROLLUPTIME as general text elements in the List of Text Elements for the item, only MODTIME and ROLLUPTIME are shown.
Is it possible to show <b>the Variable Values and MODTIME and ROLLUPTIME</b> in the same Text Elements web Item?
Thank you in advance,
Jon

Hi Jon,
Yes, this does not seem to work. Though to overcome this you could do the following
In the 'List of Text Elements', select 'Element Type' as 'Filter value' and specify the technical name of the infoobject on which the variable has been defined, as the element ID.
This shows the values of the entered variables. But maybe SAP should correct the original bug and an OSS might help.
Best Regards,
Dabre

Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane and it w

Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane from ebay, and it wouldn't connect to the internet. I was told by Verizon that the software had been changed. So I ordered a NEW in Box Octane and I am having trouble with that too. Bing won't work, nothing will work that will enable me to download Verizon Opera mini that still works on my old phone. I have a smart phone with another number but I LOVE the Octane for daily use. Why will my old Octane work but I can't get a NEW one to. Verizon guys are stumped too:( Please help!! Thanks!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

Language Dependent Text for Web Templates

Hi All,
I have a text item in a Web Template and have used a language dependent text for its caption ( which is stored in a table).
The problem is that if i transport this Templates to an another environment, the language texts are not transported automatically.
Can you please let me know the table where this information of language dependent text is stored. I think I will also have to transport all the entries of the language dependent table.
Thanks in advance and I will definitely reward points for helpfull answers.
Regards,
Vivek

Hi Guys,
Found the solution. The table name is RSBEXTEXTS.
Thanks,
vivek

EMail Bursting of Web Template - no Texts are shown!

Similar Messages

Maybe you are looking for