Email button appears after specific action?
HI,
I have a form where it needs multiple signatures - is there anyway that when the last signature is applied that an email button appears on the form to send it to the department that needs the form?
Thanks
Jodi
Hi,
Have a look at this post (Re: How to check if a form has been signed) and a similar one here (Re: Does a Signature Field Have a Signature?).
This would go in the last signature field and depnding on the value of oState you could show/hide the email button.
Good luck,
Niall
Similar Messages
-
[Nokia 700] Email widget appears after backup
Funny problem, after making a backup with Nokia Suite, the e-mail widget appears at my second homescreen. Ofcourse I can remove it from the screen, but the next time I make a backup it appears again. Always on the second screen. Firmware and Nokia Suite are up-to-date. I did not try to reset my phone because the last two times I tried it bricked and I had to bring it to a carepoint. In the past I did have the small interactive email buttons on this screen, but never the large one that appears.
Does anyone know which application I can uninstall related to the mail widget?
Phone details:
Nokia 700, Belle FP2 113.010.1506, Dutch language
Picture showing the problem is attached.
Attachments:
screenshot.jpg 51 KBHi Mark_NL
Welcome to Nokia Support Discussions!
You can uninstall the Email on the phone that is related to the email widget. You can go to Menu > Settings > Installation > Already installed > Press and Hold Mail > Uninstall. Or if you just want to remove the icon on the home screen, just press and hold the mail widget and then select the "X" icon on the right upper part of the widget. -
No button highlight after end action
After a video is played via button...the end action goes back to the video list, but no buttons are highlighted. In fact, even if I press the arrow buttons, I can't see anything but can still access videos just by guessing what is selected.
Button highlights are all on and there are no errors with the project (check project).
Thanks in advance
KennyGreat news, and glad that you got the Timelines set up.
As for the WMV's, while Encore can Import them, they are not the ideal Assets, and can cause problems. If your Project is working fine for you, then just tuck that into the back of my memory, should you encounter issues with WMV Assets in the future.
The two ideal formats/CODEC's for DVD Projects are: DV-AVI Type II files w/ 48KHz 16-bit PCM/WAV (or DD AC3) Audio, or DVD-compliant MPEG-2's. I like using separate Audio and Video files, and then just add the Audio Asset to the appropriate Timeline.
Good luck,
Hunt -
Help and Exit button appears after upgradation from External ITS to Integra
Hi All,
Though there some threads with similar problem but still I am not able to fix the problem.
After we upgraded from external ITS to Intergrated ITS some of the application started displaying "Exit" and "Help" buttons. Please note that most of the application are working fine though.
Kindly suggest.Hi Edgar,
Thanks for the reply. Do I need to maintain this parameter from SE80 or from SICF? I had read in SE80 but it not help. I do not have authorization in SICF.
If it is to be done from SICF , please let me know.
Warm regards,
Aditya -
Email re-appears after filing and deleting
My business uses Mail and ever since we upgraded our machines to Yosemite we've had recurring issues. On occasions - deleted and filed mail returns to it's original position - most often this is the Inbox. Our set up is as follows:
- Mail Server is in house - and has been for years now without issues
- All accounts are iMap - and have been for years
- The mail accounts most effected are those that are on our Mail Server. In other words - the iCloud accounts do not appear to be effected in the same way - but I can't say this for certain
Interestingly, if I file or delete a message on another device - iPhone or iPad - I never encounter this issue.
So this appears to be isolated to the Mac and mostly when we are deleting or filing on the iMap accounts that we control.
Any thoughts on this would be welcome. It's costing us dearly in productivity.My gmail account contacts are the ones I want. The "Motorola Services contacts" list include the gmail ones, and ones that have been deleted. When I delete all the contacts in the phone by using an App (MyPhoneExplorer), the phone contact list ends up being the precise list that's in gmail, the list I want. A few hours later the "Motorola Services contact" list reappears. Apparently this happens every few hours, as you see repeated instances of all the "Motorola Services contacts" joined as I see by editing a contact. It is as the "Motorola Services contacts" are somewhere in the phone memory. My Backup Assistant list in verizon is empty. I guess I will visit the Verizon rep as I have cleared data areas in the sync services, and any other attempt I make does not cure this problem for me.... Al
-
Airport Express cutting connection after specific actions
I have an airport express connected to both a macbook pro and imac, I've found by accessing certain applications (mainly games) my internet connection will die but the computer will not recognize it and neither will airport express, then usually between a minute to 2 minutes later airport express will turn flash amber and then go green and work fine again until i attempt to access the same programs. I've attempted to port forward and if i just scrap the airport and directly plug my dsl in the connection works great. Is this a hardware issue? Software issue? Whats going on here
The error message I get is:
"An error occurred while connecting to the remote speaker. The network connection was refused"
Any ideas ?? -
Multitasking appears after only one click
Multitasking bar appears with just one click. Sometimes pushing Home Button does nothing and must be pushed again once. Sometimes Camera Button appears after touching Home Button only once.
Clicking once in a white space does not open the advanced editor.
This is only initiated if you click twice in a white space.
However, the point that some people keep clicking twice either because of their computing habits in a word processing package or otherwise has been taken on board by the developers. As you say, people like yourself found the pop up irritating and wanted it removed from so easily being selected.
You will be pleased to hear that if you update to 31.1.0 then you will find that accessing the advanced property editor has been prevented from opening using the double click.
The Thunderbird program is not stored in the same place as the Thunderbird Profile folders.
So updating via 'Help' > 'About Thunderbird'
click on 'Check for updates'
will not have any effect on folders.
You could also uninstall the current Thunderbird via Control Panel > Programs and Features and then download from here:
* https://www.mozilla.org/en-US/thunderbird/all.html
However, it is always a good idea to backup your Profile just in case :)
You can use MozBackup tool to backup a Profile or use ImportExporttool to backup emails or you can manually copy the Profile folder.
Suggest you save all backups to an external storage device for safe keeping.
Here is info on Backup:
* http://kb.mozillazine.org/Profile_backup
* http://kb.mozillazine.org/MozBackup
ImportExporttool:
* https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/ -
I'm working on an interactive brief, and I'm making slides where the user has to click the correct items and then a "Contine" or "Next" button appears so they can move to the next slide. Any help out there? I have been using Captivete but I do not have a lot of experience withthe Advanced Actions. I'm sure this is a pretty simple solution for all you captivate Wizards out there.
I'm using Captivate 5.5.
Thanks for any help!
heymattmannHi Matt,
Can you post some pictures of the Advanced Actions you're trying to use that aren't working? It might give people some ideas of specific ways to help you. It can be a bit frustrating to start out, since there's not a lot out there in Adobe's official stuff for Adobe Actions, but Lilybiri's blog really is a great resource.
Others might do this differently, but for your scenario, I would create 3 similar Advanced Actions, each one assigned to execute On Success for a clickbox, and three Variables to keep track of whether or not the user has clicked a particular box. There's also your next button, which starts out hidden. Make sure to name it something like NextButton so you can find it easily in the dropdown box when making your Advanced Actions.
So I might name the actions and variables: actionClickBox1, actionClickBox2, actionClickBox3, and varClickBox1, varClickBox2, varClickBox3 (when you create the variables, set their default values to 0). You can call them whatever you want, just don't reuse names anywhere else-- you will run into problems.
The idea behind the actions is that each time the user clicks a box, you change the variable for that box to keep track of the fact that it has been clicked. That part you were on the right track for. The next part of the action then checks to see if all the clickboxes have been clicked (aka, if all the variables have been changed from their original values to the new one). If they are, it shows a next button. If not, it does nothing.
From what you said, I think you were trying to add an Advanced Action to show the next button to the next button itself. This would only execute when the user clicks that button, which makes it impossible-- you'd have to click the next button in order to show the button so that you can click it... oh dear. The decision of whether or not to show the next button needs to be part of the clickbox actions, so that upon clicking the third and final box, the next button will pop up. Because it makes this decision (to show or not to show) on each clickbox, the order you click them in doesn't matter. It will only show the next button once all the variables have been changed.
You will see that the actions are all very similar, except for the variable that they change:
actionClickBox1
first tab in the conditional action:
if varClickBox1 is equal to 0 <-- default value of variables must be 0
then assign varClickBox1 with 1
second tab in the conditional action:
if varClickBox1 is equal to 1 AND
if varClickBox2 is equal to 1 AND
if varClickBox3 is equal to 1
then show NextButton
actionClickBox2
first tab in the conditional action:
if varClickBox2 is equal to 0
then assign varClickBox2 with 1
second tab in the conditional action:
if varClickBox1 is equal to 1 AND
if varClickBox2 is equal to 1 AND
if varClickBox3 is equal to 1
then show NextButton
actionClickBox3
first tab in the conditional action:
if varClickBox3 is equal to 0
then assign varClickBox3 with 1
second tab in the conditional action:
if varClickBox1 is equal to 1 AND
if varClickBox2 is equal to 1 AND
if varClickBox3 is equal to 1
then show NextButton
Hint: If you set up one of these actions and save it, you can click a button in the top right hand corner to duplicate it and then just change the few things that are different to make the next action. It saves you from having to create it three times from scratch!
Wow, this is long... I hope it isn't overwhelming in its length, and that it helps! Advanced Actions really are a cool feature once you get past their quirks... -
Appear after all buttons clicked
OK, I have a relatively easy question for you guys. I have a slide with four persistent buttons on it and I want a link to the next slide to appear after the four buttons have been clicked. What confuses me, however, is that I'm not sure where to put the "Advance to Next Slide" button on the timeline.
I'm assuing that the problem is that I have all the buttons set to pause at the same time, but I'm not sure what the alternative would be.
I've attached pictures of my slide and timeline below. Any feedback you could give me would be much appreciated. Thanks.OK Walter, then you really need advanced actions for the buttons. Noellet gave some ideas but it will not work if the user can click multiple times on each button, sorry Noellet. I will try to explain why: in your scenario the Next button will also appear if the user clicked four times on the same button
Walter, you need to create one user variable for each button, I will label them v_one, v_two, v_three, v_four. You do not need to give those variables a start value at all. They will be set to 1, when the corresponding button is clicked the first time. You will need a conditional advanced action for each button, and as Noellet correctly pointed out, the 'Next' button has to be initially invisible.
Each conditional advanced action will have to do several things, showing the text caption and hiding all other text captions, set the value of its variable to 1, check the value of all the user variables and if they are all=1 the next button will be made visible. Easiest way will be to create indeed a counter variable as well v_counter.
Would use 2 decisions: first will be a mimick of a standard action, second will be a really conditional action. For the first button, where the Text Caption is TC1 this will be:
First decision: IF 1 = 1 (will always be true, so THEN actions will always be executed
THEN Show TC1
Hide TC2
Hide TC3
Hide TC4
Assign v_one with 1
Expression v_counter = v_one + v_two
Expression v_counter = v_counter + v_three
Expression v_counter = v_counter + v_four need 3 expressions to calculate v_counter
Assign rdcmndGotoFrame with rdinfoCurrentFrame to rewind the playhead
Second decision IF v_counter = 4
THEN Show BtNext shows the Next button
ELSE Continue
Did not try it out, let me know if it works, logic is OK
Lilybiri -
Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THXahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering. -
How to make a check box appear to the user when he does a specific action
hi all
i have created a check box and i want if the user does not do a specific action the check box appears ?so sorry i ment a frame with an error message
remember my last program about randomization
i want if the user did not enter the first name
a message appear to warn
and if he did not enter the second name
a message appear to warn
here i created a created a second frame to appear as
awarning message
and the action to allow the error frame to appear
else
c2.setVisible();
but the compiler didnot recognized c2
is that not legal to create two objects from
container c2=getcontentpane();
i want to understand this problem
and making my code right
and making my code right
Code:
import java.awt.*;
import javax.swing.*;
import java.io.*;
import java.awt.event.*;
class MyMatching extends JFrame
final JTextField txt1=new JTextField("Name1",10);
JLabel lbl3=new JLabel("Love");
final JTextField txt2=new JTextField("Name2",10);
JButton btn=new JButton("Result");
JTextField txt3=new JTextField("%",5);
JTextArea ta=new JTextArea(10,40);
ImageIcon img=new ImageIcon("D:\\Mastering Java\\Java Projects\\Icons\\alert_lrg.gif ");
JLabel lbl=new JLabel(" Do You Love Computer Science?",img,JLabel.LEFT);
JPanel pnl1=new JPanel();
JPanel pnl2=new JPanel();
JPanel pnl3=new JPanel();
MyInner inner;
MyMatching()
setupGUI();
private void setupGUI()
setSize(500,300);
setTitle("Love Matching v1");
Container c=getContentPane();
Container c2=getContentPane();
c.setLayout(new BorderLayout());
pnl3.setLayout(new BorderLayout());
pnl1.setLayout(new FlowLayout());
pnl1.add(txt1);
pnl1.add(lbl3);
pnl1.add(txt2);
pnl1.add(btn);
pnl1.add(txt3);
pnl2.add(ta);
c.add("North",pnl1);
c.add("Center",pnl2);
lbl.setIcon(img);
pnl3.add("Center",lbl);
c2.add(pnl3);
setVisible(true);
inner=new MyInner ();
btn.addActionListener( inner);
// txt1.addActionListener( inner);
// txt2.addActionListener( inner);
class MyInner implements ActionListener
public void actionPerformed(ActionEvent e)
if(!txt1.getText().equals("Name1") && !txt2.getText().equals("Name2"))
if (e.getActionCommand().equals("Result"))
//First process
int random= ((int)(50*Math.random()))+50;
txt3.setText(random+"%");
//second process
String msg[ ]={"Love Can Touch Us One Time And Last For The Life Time\nYou Are A True Lovers.","Your Feelings Are Different \nYou Should Forget it."
,"Love Is A Passion\nYou Must Be More Romantic.","You Are An Angel\n But Your Lover Is A Liar."
,"You Must Think Deeply Before That Choice\nLove Is Not An Entertainment.","Do Not Lie To Your Hart\nYou Still Love Your First Lover."
,"You Cannot Love Again\nYour First Lover is So Lovely And Cannot Be Forotten."};
ta.setText( msg[((int)( msg.length*Math.random()))] );
/* breaking up the code
double random = Math.random();
int index = (int) (msg.length*random);
String message = msg[index];
ta.setText(message);*/
ta.setForeground(Color.RED);
else
c2.setVisible();
public static void main(String[]args)
MyMatching mtch=new MyMatching();
} -
When I send an email, a photo appears after my name in the sender line. How do I get rid of it?
I don't have a signature set up, but did a little research. Someone posted that these will show up when I send an email to myself, but will not show up when sent to another person. I sent a test email to a friend to check for sure.
-
I've encountered a problem while synching my entire library. After synching I've noticed that only half of my library is playable on my iPhone. And a red circle with a Stop button appears next to the songs that didn't sync. Why is this happening?
media in the itunes lib but not connected when the sync take part will fail in this manner
media in a not supported format on ios will fail to sync
http://www.apple.com/iphone-5s/specs/
Audio formats supported: AAC (8 to 320 Kbps), Protected AAC (from iTunes Store), HE-AAC, MP3 (8 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX+), Apple Lossless, AIFF, and WAV
User-configurable maximum volume limit -
Make button appear and pause slide after rollover slidelets have been rolled over?
Hello,
I am trying to use advanced conditional and standard actions in order to prompt a user to rollover 5 rollover slidelets before a "continue" button appears. I have attached variables to each rollover slidelet, created the button and marked it as invisbile, and have created a contitional action but I'm not sure where to attach the action:
Am I using an extremely complicated method to do something so simple? I have tried various methods, get close, but then the project continues to the next slide when it should pause until the continue button is clicked even though the property "Pause project until user clicks" is checked.
Thanks for all of your help and let me know if there's any additional information I can provide!Hello,
I have described that work flow multiple times, mostly with clicks instead of rollovers but slidelets have two events, one of them is the rollover itself. So you'll have to trigger the conditional action with that event. But as Rod points out, the mimicked standard action (first decision) should focus only on that rollover and assign the value 1 to that boolean variable (don't increment, has no real sense). Then the condition will have a AND combination to check all the values, and show the button only in that case. You will have 5 similar conditional advanced actions, one for each rollover event. But since they will be almost identical (only the boolean variable label has to be changed), duplicating and editing that action will not take a long time. If you were on CP7 you could use a shared action, but duplicating will even there be the quicker solution IMO.
In this old blog post you'll find such an example (witth clicks as events)=
http://blog.lilybiri.com/template-for-reusing-script
Lilybiri -
Users will use form to fill in stats for enquiries so they want to keep form open, complete a form, click button to submit by email, then click another button to clear form, form now ready to accept form's responses. They dont' want to keep opening form each time form needs to be completed.
Hope you help.
Thanks SandraHi,
Thanks for your response, not sure what you mean by a loop. I put together
a draft form to show staff in our Knowledge Centre the sort of thing
Livecycle Designer can do.
(See attached file: Library Request Form_pub_0001.pdf)
They are currently writing out on form and manually putting into excel to
keep stats on the requests.
Due to current Global Financial Crisis my section does not want to spend
extra money at the moment seeking assistance from our tech heads. So we
are looking for least work no expense option for keeping stats. I am a PA
who just happens to have Livecycle program on my computer.
We use Lotus Notes so I thought the staff could save copy of Library
request form in the stationery folder. The staff using the form want to be
able to do the following:
1. open the Library request form at the beginning of the day;
2. when a request comes in, complete the form and click on Send by email
button
3. click on a Clear Data button to clear all data from all fields so the
form is open ready for when the next request comes in.
Staff are time poor and, as this is only one of their numerous duties, they
don't want to keep going to a location and opening a file which can be very
slow on some days
Each day form may be filled out by approximately 15 staff who may receive
anything from 0 - 4 requests a day.
I am not a tech head so script writing is a deep, dark mystery. Can you
help using the form above as an example for achieving step 3 above.
Thanks,
Sandra Smith
Personal Assistant
PricewaterhouseCoopers Australia
Office: ++61 (2) 8266 9069
Fax: ++61 (2) 8286 9069
[email protected]
http://www.pwc.com/au
Kacyndra
<[email protected]
> To
Sandra K Smith/AU/TLS/PwC@AsiaPac
08/08/2009 12:25 cc
AM
Subject
Livecycle
Please respond to Designer 8 - Is it possible to have
clearspace-200985 button to clear fields after user
0098-481178-2-216 has clicked submit by email button
[email protected]. so user can reuse form to send
adobe.com another response with different
answers?
if i understand this correctly, you just want everything cleared whena
buttons is pressed?
you can either do it individually:
on button click:
mytextField.rawData=""
or do a loop, using child/paretns..
Maybe you are looking for
-
Dvt alert not showing icons on graph
I am showing icons on the line graph with the help of dvt:alert component. Code snippet: Alert map: public Map getAlertMap() { Alert alert1=new Alert(); //alert1.setXValue("2011-10-05 10:25:34"); alert1.setXValue("20"); alert1.setYValue(48.00); alert
-
Hi Experts, How can I get pension data for a given pernr. Where is this data stored. Is it in cluster B2 or in any infotype. I should create a report to get pension remuneration for given pernr. Thank you. Best Regards, Admir. Points will be rewar
-
Communicating with C Compiler Toolchain on Remote Machine
Hi, I'm trying to develop a target for LabVIEW Embedded where the C compiler resides on another machine. I have a Debian Linux machine hosting my BSP development for my target (MPC5121e); gcc cross-compiler w/patches, ltib, u-boot, etc. is all confi
-
Those pesky ._FILE files ... for SMB
I found an old thread discussing the ._File (resource forks for file system that do not handle resource forks) when a Mac (10.3.x) connects to a Win/Linux system over SMB/CIFS. Apparently this was not an issue in 10.2.8, but has become a big issue in
-
Compression Group in 11.2.2
Dear TimesTen Gurus, Could you please help me with my question. Platform - TimesTen 11.2.2 - Linux x86 Documentation: "Only INLINE columns are supported when you specify multiple columns in a compressed column group. ..." [oracle@nodett1 ~]$ ttversio