Email can take several minutes to download on the new iPad 64 with WiFi.  I have an iPad 2, wifi, and another new iPad 8, wifi and neither has the time delay to download email.  Please advise.

Email on the new iPad (64) WiFi version can take up to five minutes to download a message.  Same message on iPad 2 or new iPad (8) with WiFi are instantaneous.  Wondering why and how to correct.

Try quitting the mail app and then relaunch it and see if the emails download correctly.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.

Similar Messages

  • How can I resolve an issue where webpages take several minutes to download? Other computers working on the same home network take not time at all.

    Firefox would not load webpage despite there being an active internet connection to the computer. I know this because firefox loaded on another home computer without any issues. I reset the ip address on the computer in question through cmd.exe and this helped the issue to an extent however it take several minutes to load webpages. I can also advise tha Internet Explorer suffered exactly the same issue and it gave me an error message early when unable to load webpages, that a remote firewall may be blocking the connection. It suggested to configure the firewall to allow connections thru TCP port 80.

    Hello ,
    Can you please post your ADSL stats by following this direct link; http://192.168.1.254/index.cgi?active_page=9116 << it only works if you have a Home Hub 2.0+ and remember to type your password in.
    Also we need a speedtest Use this link http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 as it will also help you diagnose and give you a list of solutions afterwards, it does incorporate the http://www.speedtester.bt.com one though as well.
    It sounds to me that you have a low profile, with your stats we can see if you've been having disconnections which makes the exchange raise your Noise Margin to try and increase your stabibility, but at a cost of speed, it may have been that your sync speed has recovereed, but not your IP Profile.
    Here are some helpful (I actually did find them helpful!) tips from BT: http://bt.custhelp.com/app/answers/detail/a_id/35079 up to you whether you want to read those tips, because I did actually find them helpful.  
    Can you comfirm that you have no noise on the line.  Really a test by dialling 17070 and pressing option 2 for the quiet line test should be completed in the Master Socket with no other devices connected to the line.  ANd also do you have a master socket with a split faceplate that you can unscrew the bottom half, if so behind there is a hidden 'test socket', it disconnects all your internal wiring so just to make sure its not a fault inside your premises.
    Regards Edd
    Check your Line
    BT Speedtester

  • My macbook pro (lion 10.7.2) takes several minutes to connect to the internet after waking from sleep.  Is there any way to make this instant?

    Hi
    My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep.  Does anyone else have this problem and is there a fix?
    Alan

    coxorangepippin wrote:
    The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
    What that means is that is can't be used with Lion 10.7.  PowerPC was the chip Apple used up until 2006 when they switched to Intel.  At that point, they created the Rosetta emulator to allow for PPC support for 5 years.  They finally dropped the support with the release of Lion.  It will only work with OS X 10.6 or earlier.  The other option is to purchase a new GPS, which can be had for $100 for a decent one.

  • Computer takes several minutes before connecting to the Internet

    When I start my computer, it connects to my router but it doesn't connect to the internet. All applications that require an active connection time out. However, all my other devices that are connected to my router can access the internet without any problems
    or delays.
    After several minutes, my computer is suddenly able to connect to the internet and it will go on without any problems unless I restart my computer. Then, everything happens again.
    Please help.

    Hi,
    Besides Cyber_Defend_Team's suggestion, I would like to suggest the following:
    1. Try this Control Panel\All Control Panel Items\Administrative Tools double click SERVICES go to "Wired AutoConfig" right click Properties and set the "Startup Type: " to "Automatic" (Assume you use wired connection)
    2. Upgrade the router’s firmware.
    3. Boot the system to Safe Mode with networking and see if the issue persists.
    4. When the connection is not successful, please check if you can access the router’s management webpage.
    Karen Hu
    TechNet Community Support

  • Suddenly FF has started to take several minutes to load from the Icon. Thunderbird still loads instantly. I am using Microsoft OS

    I use Vista Microsoft OS and have FF and Thunderbird icons installed. Over the last through weeks the FF Icon has often taken several minutes to load the front page. Thunderbird still loads fairly much instantly.
    The problems became more noticeable following a recent MS upgrade

    Have Windows Updates been applied? See my note about this
    https://twitter.com/imorrish/status/491020435039854592
    Look at the URL in the search results. It may have invalid character in which case you can use this fix
    http://blogs.msdn.com/b/spses/archive/2014/06/30/sharepoint-2013-the-search-results-with-5c-the-character-will-become-double-encoded-and-causes-broken-links.aspx
    Regards,
    Ian
    http://sps.cloudapp.net
    Regards, Ian Internet Sites running on SharePoint 2013 http://j.mp/sp2013sites

  • HT4906 I have installed OS X version 10.9 mavericks to put the cloud on my computer and it has removed all my photos from iPhoto. please advise

    Can someone help me understand how I retrieve 10 years of photos!

    Please explain - what happens when you are launching iPhoto?
    What iPhoto version created your iPhoto library? Was it iPhoto '11 or an older version?
    What is your current iPhoto version? When you installed Mavericks, did you upgrade iPhoto to iPhoto version 9.5, or do you still have an older iPhoto version installed?

  • User login takes several minutes

    Please let me know if anyone has experienced this issue or know how we can troubleshoot. We upgraded our BI Apps from 7.9.6 to 7.9.6.2. Following the upgrade, everything works fine but logging in using any user credentials can take several minutes.
    This includes logging into Catalog Manager, logging into OBIEE dashboards using BI Server authentication, and logging in using the MS Office plug-in. It does not take a long time when using external table authentication. This makes me think it's an issue with BI server authentication and the RPD.
    Does anyone know what may cause this problem? Oracle support has no clue so I thought I'd check with the OBIEE gurus on this forum. Thanks.

    Yes I figured out the problem right before I read your message. Thank you.
    For some reason the BI Apps 7.9.6.2 RPD enabled an init block that was not previously used in the out of the box 7.9.6. I just caught that it was enabled so tested out disabling it and it seems to have resolved the problem. The init block name is User Hierarchy Level
    The log files did not show any errors despite increasing the login time by a few minutes.

  • Yaourt takes several minutes before start downloading

    Hello everyone, I'm having a problem when I want to deal with any package in AUR repo using yaurt. It takes several minutes before start downloading.
    For example:
    $:> time yaourt -Ssa package-query
    aur/package-query 1.1-2 [installed] (1656)
    Query ALPM and AUR
    aur/package-query-git 20120121-1 (198)
    Query ALPM and AUR
    real 1m5.524s
    user 0m0.287s
    sys 0m0.053s
    Any suggestion???
    Thanks in advance!!
    *sory for my englsh, I'm from Argentina. ;D
    Last edited by emab73 (2012-11-20 16:14:55)

    I know it doesn't answer your specific question but you could experiment with another AUR helper.  Or just use makepkg.

  • Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it

    Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time.  You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up.  Like it is frozen.  I have tried rebooting the computer and it works for a few minutes then gets stuck.

    Which model iMac do you have?
    How large is your HD and how much space do you have left?
    Check out the following & do the necessary: 
    User Tip:  Why is my computer slow?
    What to do when your computer is too slow
    Speeding up your Mac
    OS X (10.6.6)
    Use Software Update or the OS 10.6.8 combo update to update your OS.  Also, update everything SU has to offer for your computer.  When done, repair permissions and restart your computer.

  • HT204380 I am using Ipad Mini, wish to download facetime, please advise me in this regard

    I am using Ipad Mini, wish to download facetime, please advise me in this regard

    FaceTime is not  available on devices purchased or used in certain countries, including Saudi Arabia and the United Arab Emirates. This is by government decree. The FaceTime app can't be downloaded or installed on these iPads.
     Cheers, Tom

  • When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.

    When I am connected to the WiFi, my apps cannot be download. Once I had disable the wifi and connect directly to the service provider, the apps will start to download. Please advise what is the problem and solution for my iPhone 5.

    I can't follow your meaning. What does connect directly to your ISP mean?
    Did you mean turning off WiFi but turning on Cellular Data on your iPhone?

  • Bought new Transformers on bluray with HD digital.  Followed all the sets to register it.  It is in iclid but will not download?  Please advise.

    Just bought new Transformers on bluray with HD digital.  Followed all the steps to register it.  It is in icloud but will not download?  Please advise.

    What online service did you download the movie from? If it wasn't iTunes, you probably can't play it in iTunes (and iCloud doesn't store movies in either case).
    Matt

  • Javascript (in Firefox 3) takes several minutes to start working when computer wakes from sleep, Mac OSX 10.5.8

    Whenever I wake my Mac from sleep, with Firefox having been left running, some parts of Firefox take several minutes to start working again. These include switching between open tabs and any website functionality that uses javascript, eg gmail. This has gone on through many updates of Firefox. If I quit Firefox immediately on waking the Mac and restart it, everything is OK.

    The following worked for me:
    http://support.mozilla.com/en-US/questions/684867
    "Problem: I had the same problem but with mac osx 10.5.8, Firefox 3.6.6 sometimes prints and sometimes does not, but the preview was always blank and I could not save to pdf file.
    Solution: I downloaded Firefox 3.5.10, installed it on my desktop and opened it, tried print preview and it worked, quit Firefox 3.5.10 and ran 3.6.6 and voila! print preview is working fine and I can save to pdf fine.
    I guess running 3.5.10 fixes the profile in a certain way. I have no idea how that happened but it worked."

  • OSX 10.9.5 start up takes several minutes to connect to internet

    My mac mini has now got a faster boot up time since having a SSD installed.  However, I have noticed it takes several minutes for it to connect to the internet.  Under Login Items, I use to have my NAS setup to connect a drive on start up.  But, I always received the error "There was a problem connecting to server."  I removed it.
    What I have tried so far:
    Upgraded from 10.8.5 to 10.9.5, that didn't change anything.
    I have a Airport Extreme router (7.6.4) and even swapped it out for a Linksys router to see if that was the issue.  That didn't matter.
    All new ethernet cables for the router and mac mini.
    Firewall turned off on OSX.  I have since turned it back on since that didn't change anything.  I do have Little Snitch running too.
    Any other suggestions would be greatly appreciated.

    Welcome to the Apple discussions.
    When you say your machine is near capacity ... you want to keep at least 10% of your hard drive empty for systems usage. Less than that and the system slows way down.
    One thing you can do is to use this tool to see what your largest files are on your system - move data to an external hard drive and delete, or just delete unused/un-needed data: http://software.filefactory.com/Mac/WhatSize_10-3-91.html
    You might also run MacJanitor to run the daily/weekly/monthly scripts, which sometimes don't run automatically: http://personalpages.tds.net/~brian_hill/macjanitor.html. Some have found using a utility like OnyX can help with disk space. OnyX is available from http://www.titanium.free.fr/pgs2/english/download.html . Note OnyX does the same thing MacJanitor does, plus much more.
    You can use Monolingual to delete the languages you know you'll never use from the operating system - depending on choices it can save over 1GB. Choose language options carefully, as you can muck things up if you rush through it: http://monolingual.sourceforge.net/
    This FAQ is good reading on maximizing disk space: http://www.thexlab.com/faqs/freeingspace.html

  • Firefox takes several minutes to load

    It takes several minutes for Firefox to load every time I log in. Takes longer if computer is started. Have troubleshot everything I could find with no avail. It's getting old and all that I have read I can't believe Mozilla has not heard and fixed this problem.
    == This happened ==
    Every time Firefox opened
    == I think it was when I updated.

    The question certainly isn't solved. I have no trouble with speed when entering sites - it's just when first trying to enter Mozilla. I tried IE this morning as a test and was into the home page in a few secomds. Moxilla 8 takes about a minute and a half. Version 3.6 loads immediately. I previously tried vers 8 a couple of weeks ago and web sites took a long time to load. This was not a problem after using vers 3.6 for a while and then re-downloading vers 8. I am still frustrated by the slow load up time it takes to get to the home page and believe this may be something the system administrators need to fix..

Maybe you are looking for

  • "Insufficient data for an image" still occurs with Adobe Reader 11.0.02

    Hello, I have upgraded to Adobe Reader 11.0.02 although I still recieve the "Insufficient data for an image" error when viewing some PDF files. Please help. Thanks, Steve

  • How can I remove icloud completely.

    How can I remove icloud completely. I don't understand it. I can't sync music to ipod and now I've deleted music by accident.  I am a complete novice and idiot.  Thank you

  • How to assign standard hirarchy to controlling area?

    Hi, i have created a controlling area and trying to create cost centers but i cannot do this unless i define standard hirarchy to controlling area.. was not sure what is standard hirarchy and how i can assign it to controlling area? Thanks, Shilpa

  • Error message on email send attempt

    Hi all I have suddenly started getting email send failures messages on my iCloud account.  It doesn't seem to be for all messages and I have not changed any settings. The delivery failure message is as listed below: Your message cannot be delivered t

  • Auto Save settings

    hi i just encountered a peculiar problem with adobe premiere- Was editting video for the past 3 hours and had saved a sequence, the windows based system took a restart which i assumed may have been because of avg, now on that particular sequence the