Email cannot show Chinese character.

Hi,
When I read emails in my ipod touch, the Chinese character cannot be shown properly. They appear to be all chaotic characters. Can someone help me what I should set up/install in order to view the Chinese character?
Thanks in advance.

Tom Gewecke wrote:
I think that currently only emails in Unicode may be displayed correctly and there is no way yet to adjust the encoding for other kinds.
Are you sure about that? What about Western encoding for the French and German?
Or is this yet another reason for me not to buy an iPhone?

Similar Messages

IPod cannot show chinese character now, previously can

Hi everyone,
Thanks for trying to help.
So I have some songs with Chinese characters in the song names. They work perfectly fine, I mean before, when they become symbols, I just use the ID3Mod to convert them and import them into my iPod nano and I can see all right names.
Now, I don;t know what happened, I just discovered today. I found that most of the chinese characters cannot be displayed, they did not become strange monsters symbols, but " " blank.
Do Anyone have any idea what have happened ?
The thing I did today is just import a few new songs.
P.S: those names shown perfectly well in iTunes
Thanks very much.
Message was edited by: memoryrecalls

I've got the same problem with itunes, quicktime, and also imported Safari bookmarks (the list is doubtless longer than that, but that's what I use and have noticed so far)
The OS recognises the Chinese, in fact in most cases I wrote the Chinese text in Mac OSX, and it displays the text correctly in the file name but when you open in itunes or quicktime it's scrambled into nonsense.
Since Chinese people constitute 1.3 Billion consumers that's a pretty poor show from Apple.. (LOL)

Promblems of showing chinese character set in workshop 8.1

Promblems of showing chinese character set in workshop 8.1 IDE
I just saw the rectangle( it meant that can't find proper font).
Could anybody tell me how to fix it ?

Please see the attachement.
JDK : 1.4.1_02
os : Winodws XP
"Raj Alagumalai" <[email protected]> ¦b¶l¥ó
news:3f7070d4$[email protected] ¤¤¼¶¼g...
Samuel,
Can you provide more information on the Operating System on which you are
running ? Also can you attach the file with which you are having issues.
Regards,
Raj Alagumalai
Backline Workshop Support
"Samuel Hsu" <[email protected]> wrote in message
news:3f6f1539$[email protected]..
Promblems of showing chinese character set in workshop 8.1 IDE
I just saw the rectangle( it meant that can't find proper font).
Could anybody tell me how to fix it ?
[Snap1.jpg]

Cannot insert Chinese character into nvarchar2 field

I have tested in two environments:
1. Database Character Set: ZHS16CGB231280
National Character Set: AL16UTF8
If the field type of datatable is varchar2 or nvarchar2, the provider can read and write Chinese correctly.
2. Database Character Set:WE8MSWIN1252
National Character Set: AL16UTF8
The provider can not read and write Chinese correctly even the field type of datatable is nvarchar2
I find that for the second one, both MS .NET Managed Provider for Oracle and Oracle Managed Data Provider cannot read and write NCHAR or NVARCHAR2 fields. The data inserted into these fields become question marks.
Even if I changed the NLS_LANG registry to SIMPLIFIED CHINESE_CHINA.ZHS16CGB231280, the result is the same.
For the second situation, only after I change the Database Character Set to ZHS16CGB231280 with ALTER DATABASE CHARACTER SET statement, can I insert Chinese correctly.
Does any know why I cannot insert Chinese characters into Unicode fields when the Database Character Set is WE8MSWIN1252? Thanks.
Regards,
Jason

Hi Jason,
First of all, I am not familiar with MS .NET Managed Provider for Oracle or Oracle Managed Data Provider.
How did you insert these Simplified Chinese characters into the NVARCHAR2 column ? Are they hardcoded as string literals as part of the SQL INSERT statement ? If so, this could be because, all SQL statements are converted into the database character set before they are parsed by the SQL engine; hence these Chinese characters would be lost if your db character set was WE8MSWIN1252 but not when it was ZHS16CGB231280.
Two workarounds, both involved the removal of hardcoding chinese characters.
1. Rewrite your string literal using the SQL function UNISTR().
2. Use bind variables instead of text literals in the SQL.
Thanks
Nat

Cannot display Chinese Character in ver 10.1.3

Hello,
I would like to ask one more question, when i run my program, it contain two jsp pages,
the first one is to ask the user to input some chinese character, then the second one is to display the input data in the second page. I found out that the second one cannot display the input chinese character, but other chinese character in the second one can be display.
Some of my code in the second one are as follow:
String firstName = request.getParameter("firstName");
中文 <%=firstName%>
The result are displayed are displayed as follow:
中文 ?T???\!
It seems to me that the text can display but the variable cannot display, does any one know the reason?
One of the replies from the JDeveloper forum are as follow:
I seem to recall there was a bug in the 10.1.3 OC4J with passing parameters on the URL in other languages. You might want to ask on the OC4J forum:
OC4J
Regards,
Alan 20/11/2005

chulongjiang,
i solve the problem with your advice, thanks lot!
Regards,
Alan 24/11/2005

Mapbuilder cannot display chinese character properly

I downloaded the latest mapviewer package.I found the mapbuilder cannot display chinese charater properly.neither the charater readed from database,nor the charater I typed. Every chinese character is substitude by a blank square.Anyone have good suggestion?

Hi,
this early preview has not been tested in other
languages than English. We are aware of this problem
with Chinese characters, and it may be related with
font, but
needs more investigation. Which Windows version are
you using?
To start the program setting the language to English
you can try:
java -jar -Duser.language=en -Duser.region=US ...
Thanks.
JoaoI tried . but no helpful. an My os is windows xp

Cannot print Chinese character in postscript 11iAS

We are using HRMS 11.5.10AS.
We want to print the report in postscript. However, some chinese character cannot be print correctly. ( it's right in TXT )
Anyone know how to solve it?

chulongjiang,
i solve the problem with your advice, thanks lot!
Regards,
Alan 24/11/2005

Cannot submit chinese character in Parameter Form

Hi all report professionals, when I tried to submit chinese character as an input parameter via the Online Report Parameter Form, the report server cannot recognise it as a chinese character. This scenario does not happened when I use Oracle Report Developer to run the report.
I have already set paramform=yes in the URL. Any other setting or configuration is needed to be set to solve the problem ? Thanks

I have the same problem. For my case, I have a parameter form which require the user to key in some Chinese. After generated the report, those Chinese parameters displays as some symbols in the report. I have tried to change the code page of the parameter form as Chinese Big5. It is the same.
Can anyone give me a hand on this?
Thanks.

Can't show Chinese character

can type Chinese email but cannot display Chinese email when it receive. any hints to fix it?
thx!

Seems that you've multilingual operating syste on the device.
You receive emails with incorrect on with non-supported encoding.
If you receive emails via corporate Blackberry Enterprise Server (BES) - ask the BES administrator to check this issue.
If you receive emais via your Wireless Provider - contact your wireless provider support.

Showing chinese character in itune

Hi i have a power book G4 when i import my mp3 into i tune all the chinese character did not show. what should i do to get the character to show??

Hi i have a power book G4 when i import my mp3 into i
tune all the chinese character did not show. what
should i do to get the character to show??
Assuming you do have Chinese fonts and you can see Chinese in other apps, this problem is caused by the ID3 tags of the mp3's not having the right encoding. See this note for info:
http://homepage.mac.com/thgewecke/mlingos9.html#itunes

New drivers made programs show chinese charact

Ok I'm getting kinda pissed here, I installed new drivers for my SB X-Fi Xtreme Music and, well, after the update was done, every textline in the default windows volume control is in chinese, and all the Creative related software is also in chinese, another problem was that my Creative Console Launcher was uninstalled, and even if I try to reinstall my default drivers with the CD that came along with my soundcard, I can't get rid of those **bleep** chinese characters..
Am I going to have to format my whole PC to get this **bleep** thing working properly or what? :S
I'm starting to think not even that will solve this problem.. >.<

Originally Posted by Nambo
I have a Dell XPS 8300 Windows 7 with Sound Blaster X-Fi Xtreme
In unsuccessfully trying to get an output from the optical port, I updated the drivers from Dells own support site.
Now I have no sound, in "Control Panel" "Sounds" has lost any mention of an anologue device even with "show hidden devices "checked.
Device manager claims this device has no drivers, but on the next page the scan says the drivers are up to date.
The thing is, I cannot do anything else such as roll back drivers, delete drivers, even scan drivers without getting the BSOD and the message "IRQL not less or equal", this occurs if I try the same in add/remove programs using creatives own installer.
What can I do?, how can I remove the drivers if the system crashes half way through?
I think you may have downloaded the wrong driver. I did a search online and found many sites that say that the Dell XPS 8300 comes with X-Fi Titanium. You may have downloaded the X-Fi Xtreme driver. You may want to try downloading the X-Fi Titanium driver.
Here is a link on Creative's support site for the latest X-Fi Titanium driver.

Printer MF4350d...Preferences Settings showing chinese character

Dear Support,
I had MF4350d printer. Due to some problems in connectivity i uninstalled the driver completely and reinstalled it on my Windows 8 - 32bit OS.
Now when i open Start > Devices and Printer > Right click the driver icon and select Printer Properties, it shows everything in chinese or japanese characters.
Strange enough the main window appears in english. The two windows would give you the idea about it.
Please advice.
Regards,
Arshi

This note discusses the problem and possible fixes:
http://homepage.mac.com/thgewecke/woutlook.html

JavaFX Mobile EA on Window Mobile 6.1 cannot show chinese correctly

Text{content: "测试" }, it is shown well in the JavaFX Desktop or applet. but it is garbled on JavaFX real device(HTC Touch Diamond 2 Window Mobile 6.1 professional)
I also try the new String("测试".getBytes(), "UTF-8") even "\u6D4B\u8BD5", nothing can be working well.
Anyone can help us on the garbled issue? we are really appreciated him, now we have tried any way and where should we go?
Thank you very much

the Character is not equals charIt should be, but it seems we don't have total symmetry of types yet. See [finish primitive-sequence to primitive-array conversions|http://javafx-jira.kenai.com/browse/JFXC-3257] bug, for example, or [nativearray of byte|http://javafx-jira.kenai.com/browse/JFXC-3325] which will be fixed in SoMa (JavaFX 1.3?).
I tried:
var foo = "{[ 1 .. 400 ]}";
var dummy = foo.substring(0, 1024);
var buff: nativearray of Character = dummy.toCharArray();
println(sizeof buff);and I get an error: TestPlain.fx:21: incompatible types
found : nativearray of Character
required: nativearray of java.lang.Character
var buff: nativearray of Character = dummy.toCharArray();
^
1 errorAnd if I write: var buff: nativearray of Character = dummy.toCharArray() as nativearray of Character; I get a compiler crash...
I see, looking at [String(byte...) doesn't compile|http://javafx-jira.kenai.com/browse/JFXC-2852] bug, SequenceConversions class in the webrev.zip file, that we don't have a toCharArray method yet. Either an overview or some technical issue, I don't know.
So it looks like there are still some holes in nativearray support (it was presented as "experimental" in JavaFX 1.2 release announcements...).
PS.: I am not a Sun employee, I don't know Chinese, I don't have a Windows Mobile phone and I didn't even tried the mobile emulator yet (just tried, seems hard to use outside of NetBeans, which I don't have), among other problems. So I fear I am not the best help you can get, don't put high hopes on me... :-P

Showing Chinese character:

I wonder to show a chinese word in AVAlertNote, is it possible? Please give me some guidelines if it can.
Thanks your concern.
Regards,
Tham

1. Obtain an ASText object for the Chinese text.
2. Use AVAlertWithParams.
This can of course be wrapped in your own routine to do a simpler
AVAlert of your Chinese text.
Aandi Inston

Cannot install Chinese character recognition

I click on add East Asian Support in the Region/Langauge section and it keeps asking me for the Microsoft XP Pro cd. This unit as regulars here know does not come with this cd.
Any suggestions would be appreciated since I am new to Thinkads and this forum.
Also, I have never been asked for this cd on any PC, downloaded the language packs from microsoft and I what is needed is laptop to display Chinese characters.

I guess that is where your problem lies, you didn't use the Lenovo recovery media to install the OS, you used the normal aftermarket window cd for the installation, which is why it asked for the CD.... you got me baffled for a moment there, but that is normal.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Email cannot show Chinese character.

Similar Messages

Maybe you are looking for