Email client unable to connect?

Just in the past couple of days I have been unable to connect to my Gmail and Yahoo email accounts through the email client. I had no problem last week with this and I have neurotically checked the setup information for each email account.
The error I am getting is this: "Unable to connect to server, please try again."
And so I do, but with no such luck.
I am able to connect to WiFi without any problem (I am using my PlayBook to type this out right now).
Anyone know how to amend this problem?

Hi, eillo, and welcome to the Forums!
Me, too! My Gmail account remains stable, however I am tired of having to constantly re-input my Yahoo password.
The Gmail issue is addressed in this thread: http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/Playbook-2-0-cannot-connect-to-Gmail/td-p...
I found some information about the Yahoo e-mail issue in this thread: http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/Google-Apps-and-Yahoo-Mail/td-p/1579171/p...
Unfortunately, trying to address issues with two different e-mail systems in the same thread is confusing. I came across your thread while researching the Yahoo issue. If I can't find another thread related specifically to the Yahoo issue, I intend to start a new thread.
Regards,
Office_BB_Guru

Similar Messages

Client unable to connect to Oracle 10g on linux

I have installed Oracle 10g on an Intel box running RedHat AS 3.0. The database installation was succesful but I am unable to connect to it from the client on my laptop running Oracle 10g client and Winfdows XP Pro. The server ip is 192.168.1.10 and I can ping it from the client:
C:\>ping attila.n3kje.net
Pinging attila.n3kje.net [192.168.1.10] with 32 bytes of data:
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Reply from 192.168.1.10: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.1.10:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Here is some info about the 2 environments:
[oracle@attila bin]$ uname -a
Linux attila.n3kje.net 2.4.21-9.0.1.ELsmp #1 SMP Mon Feb 9 22:26:51 EST 2004 i686 i686 i386 GNU/Linux
Server hosts file
======================================================
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 attila.n3kje.net attila localhost.localdomain localhost
hostname output
======================================================
[root@attila root]# hostname
attila.n3kje.net
ifconfig output
=======================================================
[root@attila root]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:C0:9F:1D:0C:C8
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13772171 errors:0 dropped:0 overruns:0 frame:0
TX packets:13748842 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1269613311 (1210.7 Mb) TX bytes:4065314800 (3876.9 Mb)
Interrupt:16 Base address:0xecc0 Memory:fe100000-fe120000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5513840 errors:0 dropped:0 overruns:0 frame:0
TX packets:5513840 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:865454291 (825.3 Mb) TX bytes:865454291 (825.3 Mb)
Client TNSNAMES.ORA
======================================================
# tnsnames.ora Network Configuration File: C:\Oracle\product\10.1.0\Client_1\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLE10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DEV10G)
PRDSRR =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dev10g)
Client SQLNET.ORA
======================================================
# sqlnet.ora Network Configuration File: C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
Server TNSNAMES.ORA
======================================================
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEV10G =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = attila.n3kje.net)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DEV10G)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Server LISTENER.ORA
======================================================
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = attila.n3kje.net)(PORT = 1521))
Results from the TNSPING command issued at the client
=================================================================
C:\>tnsping prdsrr
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-APR-2
004 09:26:11
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 192.168.1.10)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = dev10g)))
TNS-12541: TNS:no listener
C:\>tnsping oracle10g
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 02-APR-2
004 09:26:38
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = 192.168.1.10)(PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVI
CE_NAME = DEV10G)))
TNS-12541: TNS:no listener
C:\>
Trying to connect to the database from the server
==================================================
[oracle@attila bin]$ echo $ORACLE_SID
DEV10G
[oracle@attila bin]$ ./sqlplus system
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Apr 2 12:22:29 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Pr
oduction
With the Partitioning, OLAP and Data Mining options
[oracle@attila bin]$ ./sqlplus system@dev10g
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Apr 2 12:23:09 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
tnsping issued at the server
======================================================
[oracle@attila bin]$ tnsping dev10g
TNS Ping Utility for Linux: Version 10.1.0.2.0 - Production on 02-APR-2004 12:3
:44
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/10.1.0/db_1/network/admin/sqlnet.ora
TNS-03505: Failed to resolve name
What am I doing wrong?
Thanks
Renato

Ok, I was able to succesfully connect to the database from the client. I made the following changes to the sqlnet.ora, tnsnames and listener. Here are the changes I made:
sqlnet.ora
==============================
# SQLNET.ORA Network Configuration File: /u01/app/oracle/product/9.2.0.1.0/netwo
rk/admin/sqlnet.ora
# Generated by Oracle configuration tools.
# NAMES.DIRECTORY_PATH= (EZCONNECT)
NAMES.DIRECTORY_PATH= (EXCONNECT, TNSNAMES, ONAMES, HOSTNAME)
listener.ora
==============================
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = DEV10G)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0/db_1)
(SID_NAME = DEV10G)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
tnsnames.ora
===========================================
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/10.1.0/db_1/n
etwork/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DEV10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = DEV10G)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Here is the new problem!
I start the dbconsole using the folowing command:
[oracle@attila bin]$ ./emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://attila.n3kje.net:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................
... started.
Logs are generated in directory /u01/app/oracle/product/10.1.0/db_1/attila.n3kje
.net_DEV10G/sysman/log
When I try and access it from the client I get the following error message:
"The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation."
What am I doing wrong this time?
Your help would be greatly appreciated
Thanks
Renato

ICloud email signup: "unable to connect to server"

Trying to sign up for the iCloud email account on iOS6. Whenever I get to set where I submitting my desired name to be added to the "@icloud.com" part, this popup appears saying this
"Cannot Create Apple ID
Unable to connect to server."
what's going on? are their systems down AGAIN?

I just went through this. After many support calls, it turns out my email address I was using to sign up had been used a long time ago for perhaps a MobileMe account. The phone didn't say the address was in use but when I went to sign up online for the AppleID at appleid.apple.com it said it was in use already. I did a password reset and then used that email and password to sign into iCloud on the phone and all worked perfectly.
So, I'd try signing up at appleid.apple.com, and see what happens.

E71 Email problem- "Unable to connect..."

Can anyone help me set up my new E71 for email? Im following the instructions and here is what happens:
From the main screen i select "set up email"
A box comes up asking if I want to use network to send and received data- i select 'yes'
'Testing network connections'
A screen comes up 'Welcome to email set up'- I select 'start
A box comes up with 'Email address' and a space to enter mine
I enter mine ( [email protected])
'Getting email settings....'
"Unable to connect with the information provided. Please try again"
Ok- so i've tried entering my email a few times, tried a hotmail address i use and tried rebooting the system- it's the same final message every time.
What can I do? Am I doing something wrong?
M

I had the same problem
I think the error arising from the check username
example: the username is [email protected] , NM only understand xxxaaa is username and the mail server can not check because mail server need domain name.
i hope NM fix this problem soon
sory for my english not good

Outlook 2010 Client - "unable to connect to retrieve additional data" for some Distribution lists

We have a mix of Outlook 2003, 2007 and 2010 clients in our organization.
Users with an outlook 2010 client are having issues with a number (not all) of our distribution lists.
Issues: When selecting a distribution list in the new message 'to' fiedl, a 'message tip' appears with the name of the DL and 'contains xx recipients'.
However, when attempting to expand the DL (selecting the + sign) the following prompt appears "Cannot perfrom the requested operation. The command selected is not valid for this recipient. The operation failed"
When selecting the DL through the outlook address book the memberlist is empty and has a mail tip "unable to connect to retrieve additional data".
The DL's were all created in a 2003 environment.
We are currently setting up a 2010 environment, and all DL's were created prior to any schema updates etc.
Of note, users experience the issue, but access the list through OWA don't have the issue.

Please also perform the following steps to troubleshoot the issue.
1. Temporarily turn off firewall and antivirus program on the problematic machine for a test.
2. Remove the Outlook profile completely and create a new profile.
3. Login on the same mailbox by Outlook 2010 on another machine to check the result.
If the issue persists, please open Event Viewer and check whether any error message exists. If so, please post it here for research.
Thanks.
Novak Wu-MSFT

VPN client unable to connect

I am unable to connect to our corporate internet with the client. It tries the primary and the backup addresses and then reports that the client timed out. Our IT is unable and/or unwilling to help troubleshoot. What can I do to find the problem? I am operating inside a local network over a wireless connection.

I too am having trouble maintaining my VPN Client connection.
We have a 515E PIX and Cisco VPN Client 4.8
Users will seemingly randomly loose access to our Network without any obvious reason.
Like today. I'm at home happily working over VPN for 6-hours, then I try to connect another computer up to work over VPN. My signal gets dropped and when I try to re-connect I get the request for Password but then it never connects. I have a few User IDs that I can use and none work.
I did as suggested in the previous post and have attached the Detailed log of one attempt to connect.
Mikka

Clients unable to connect and get DHCP - LAP1142N AP and 5508 WLC

Hi,
I have 19 locations, each with 1 or more LAP1142N AP's in FlexConnect mode, AP's are primed using CAPWAP to my 5508 WLC at the datacenter. The AP's join the WLC without issue every time. I have two WLAN's, one guest and one staff, the guest network is open and obtains DHCP from a WatchGuard XTM33 firewall at each of the remote locations. The staff side is WPA2/RADIUS and DHCP is assigned from the WLC. Each AP is assigned a static IP that is not in the DHCP scope. For example: DHCP scope on the branch firewall is 192.168.1.10-250 the AP will be assigned static IP of 192.168.1.1.. The AP's are connected to a HP procurve switch that has a untagged VLAN, the firewall is using the native vlan 1 and so is the AP.
I have been running this network for over a year and it has not had a single issue until the last two weeks. Nothing on the network has changed or has been upgraded.
Now for the issue: The issue I am seeing is that clients are no longer able to connect to the AP and do not get DHCP assigned to them. I am able to get it working, if I remove the static IP from the AP, the AP will reboot, join the controller, then begin working, users can connect and DHCP is assigned from the firewall as it should. However, If the AP then reboots, the AP will join back to the controller but no clients can connect nor do they get a DHCP address. So, I then reassign a static IP to the AP again and it reboots, connects to the controller and clients then can connect and get DHCP.
Attached is a running config from one of the APs
I've found several posts on this topic, in fact the patch of unassigning or reassigning static IP is one that I found. However, I wanted to post this to see if there is any further assistance I can get on this. I am also waiting on my SmartNet to start up and will be contacting Cisco support as well.
Thanks for any help.

Alright, so I finally figured out the issue with this. I had a Mobility Anchor set on the guest WLAN and once I removed that all started working again.
What is Mobility Anchor?
A. Mobility Anchor, also referred to as Guest tunneling or Auto Anchor Mobility, is a feature where all the client traffic that belongs to a WLAN (Specially Guest WLAN) is tunneled to a predefined WLC or set of controllers that are configured as Anchor for that specific WLAN. This feature helps to restrict clients to a specific subnet and have more control over the user traffic. Refer to the Configuring Auto-Anchor Mobility section of Cisco Wireless LAN Controller Configuration Guide, Release 7.0 for more information on this feature.

Iphone 5 Email client fails when connecting to server with certs signed by personal CA

My mail resides on my own server with its own private CA that was used to sign the email server cert.
I used sendmail and CA and certs were created with below commands:
CA -newca
openssl req -newkey rsa:1024 -nodes -keyout sendmail_req.pem -out sendmail_req.pem
openssl ca -out sendmail_cert.pem -infiles sendmail_req.pem
Before I switched to iphone 5 I had Iphone 3s and all worked fine.
I would get a notification: cannot verify server identity, but after clicking continue all would work fine.
The client would connect on port 993 to receive email and on port 587 to send.
Now on iphone 5 I get error: Cannot verify Server Identity with no prompt to accept the cert.
Is there any work around for it?
I tried to export the cert from I mac and import to iphone but still no luck.
It looks like since iphone 4 the certs not issues by legal CA's don't work?
thx

I fixed that by getting certs from: https://www.startssl.com/?app=1.
The certs are free and work fine.
Since Iphone 4 apple does not accept unknown CA Authorities.

Yahoo email client unable to verify

Following endless requests to reset password I deleted my BT POP account from MacBook Pro. Now trying to setup the account again in Mac Mail client and continually get error:
unable to verify account name and password
Just to underline the absurdity of this error, I currently have access to BT mail via Webmail in Safari (obviously no problem with my account name and password there) also on an iPad and BlackBerry and a Mac Pro in my studio.
Any ideas gratefully received

Make sure you have entered the correct settings. They are........
Server mail.btinternet.com (incoming and outgoing)
User name full btinternet address i.e [email protected]
Incoming port for POP3 995
Outgoing SMTP port 465
SSL enabled
Server requires authentication ticked (or whatever the equivalent setting is in Mac Mail)
Password plain text (or whatever the equivalent setting is in Mac Mail)
Set the account up manually rather than automatically

Open directory server crashing every 30 days / clients unable to connect to calendar, contacts server

Hello everyone,
I am running an up to date Mavericks Server which serves exclusively as a calendar and contacts server for about two dozens devices. The server is reachable via DynDNS, however, the public IP hardly ever changes (only once or twice a year maybe). Tried setting the OS X DNS Server to serve "all clients" and "some clients".
For about 6 months (i.e. also under Mountain Lion), I am having a very strange problem. Roughly every 20-30 days, clients will not be able to connect to the server, instead getting a "wrong password" dialog. Restarting the open directory server will help for the next 30 days.
I have tried repairing the database as detailed here, however, the issue persists.
Any help would be highly appreciated!
I would have tried setting up a clean server installation, migrating calendars/contacts manually and re-adding all users by hand, however, I am not aware of an easy way to do so. The terminal command for calendar backup is broken under mavericks (might work with this workaround) and re-adding users manually would apparently involve correcting user UUIDs afterwards in order to match the migrated calendar data. Do you know of a better approach?
Thanks a lot!
DPSG-Scout

Hi Linc,
This looks the most relevant to me:
opendirectory.log
2014-03-11 11:13:09.460675 CET - 333.2628758.2628759 - Client: Python, UID: 93, EUID: 93, GID: 93, EGID: 93
2014-03-11 11:13:09.460675 CET - 333.2628758.2628759, Node: /Local/Default, Module: PlistFile - predicates with 'AND' are not supported
2014-03-11 12:09:00.296514 CET - State information (some requests have been active for extended period):
          Sessions: {
              28 -- opendirectoryd:
                          Session ID: 7BFBA6FE-A968-4399-A129-E3A5945E2A81
                          Refs: singleton
                          Type: Default
                          Target: localhost
          Nodes: {
              43 -- authd:
                          Node ID: 6D0E236D-6DBD-4E8C-BC01-B3F50C2C2D8E
                          Nodename: /LDAPv3/127.0.0.1
                          Session ID: <Default>
                          Refs: 1
                          Internal Use: X
an many more similar ones…
Thanks for your effort!

Client unable to connect AP with MAC filtering

I need some help from you, I found problem that some clients cannot connect to AP( but some client can connect as normal). As I checked from logs, I see a lot of messages as below:
Nov 18 01:13:55.760: %DOT11-4-MAXRETRIES: Packet to client 0023.68be.1c88 reached max retries, removing the client
Nov 18 01:13:55.760: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0023.68be.1c88 Reason: Previous authentication no longer valid
Nov 18 01:13:55.763: %DOT11-4-MAXRETRIES: Packet to client 0023.68be.1c88 reached max retries, removing the client
After that I tried to reload AP and then it can connect as normal but I found the log that it roaming to another AP in the same SSID as log below:
Nov 21 08:52:12.147: %DOT11-6-ROAMED: Station 0023.68be.1c88 Roamed to 003a.99e6.6860
Nov 21 08:54:33.855: %DOT11-6-ROAMED: Station 0023.68be.1c88 Roamed to 003a.99e6.6860
Nov 21 09:04:34.495: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0023.68be.1c88 Reassociated KEY_MGMT[NONE]
Nov 21 09:04:39.097: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0023.68be.1c88 Reason: Sending station has left the BSS
Nov 21 09:04:39.103: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0023.68be.1c88 Reassociated KEY_MGMT[NONE]
Nov 21 09:04:42.309: %DOT11-4-MAXRETRIES: Packet to client 0023.68be.1c88 reached max retries, removing the client
Nov 21 09:04:42.309: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 0023.68be.1c88 Reason: Previous authentication no longer valid
Nov 21 09:04:42.315: %DOT11-4-MAXRETRIES: Packet to client 0023.68be.1c88 reached max retries, removing the client
I've check from CISCO document, this problem may be from Radio Interference, so please help to investigate and find out the root cause that why some clients cannot connect to AP at that time and how to prevent this problem occurred again.
Thank you in advance.

Hi @Krish1840 , and thanks for the reply!
Do the pages come out blank when making a copy as well?
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend readding the printer via OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Good luck and please let me know how it goes!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Email Notification: Unable to connect to smtp server

Hi,
I am working on SOA 11g. Jdeveloper version 11.1.1.5.0.
I am trying to send an email. I have done all required configurations such as:
1) Mail Access Protocol = IMAP
2) Outgoing Mail Server = smtp.companyname.com
3) Outgoing Mail Server Port = 25
4) Outgoing Mail Server Security = None
5)Workflow Notification Properties -> Notification Mode = Email
When i execute the process it gives me the error- Status type : DELIVERY_TO_GATEWAY:FAILURE, Status Content: javax.mail.MessagingException: Could not connect to SMTP host: smtp.companyname.com, port: 25
Please help me resolve this.
Thanks
Pratichi

I have the same symptom when in EM, send a test notification.
Error out as :
javax.mail.AuthenticationFailedException
in soa-server1-diagnostic.log file,
it states:
[2012-04-27T15:41:23.770-05:00] [soa_server1] [ERROR] [] [oracle.soa.services.notification] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@15ffc173] [ecid: 11fafdb229e0761e:5bb57c3b:136f14ee21b:-7ffd-0000000000000002,1:27716] [APP: soa-infra] <.> Error status received from UMS.[[
Status detail :
Status type : DELIVERY_TO_GATEWAY:FAILURE,
Status Content : javax.mail.AuthenticationFailedException,
Addressed to : EMAIL:[email protected],
UMS Driver : Farm_SCMDomain/SCMDomain/soa_server1/usermessagingdriver-email:oracle_sdpmessagingdriver_email#Email-Driver,
UMS Message Id : f58963d88c54f2ab130e1e3fb887bba3,
Gateway message Id : fusionmail.oracleads.com:25@[email protected],
Status Received at : Fri Apr 27 15:41:23 CDT 2012.
Check status details and fix the underlying reason, which caused error.
what that means? I am lost.

RDP via remote web workspace from Server 2012 R2 Essentials on Win 8 Client unable to connect to local printer.

Hi,
Having an issue redirecting to a local printer when using a remote desktop session initiated through from a Essentials 2012 R2 server via remote web workspace on a Win 8.1 client, it doesn't pick up the Local printer, or even give the option of which
local resources to use on connection, just goes straight through and displays the remote desktop on connection.
I know its not a server global policy issue as it works fine on a Win 7 client with the same user being able to print locally whilst in a RD session
Any idea's as to how I can resolve this issue and enable local redirected printing or at least give me the options of specifiying which resources to connect on the local machine at the start of a session.
It's complicated I think as the essentials box is acting as the gateway so I cannot setup a session directly, the certificates are all working correctly so I am confused as to whats causing the issue.
Any help would be appreciated.

Hi,
Thank you for posting in Windows Server Forum.
Please try to connect the printer with IP address and check the result. You can go through beneath article might helpful in your case.
Windows Server 2012 Essentials : Add a Network Printer
Try to change the selected print drivers:
1. Return back to the Devices and Printers window
2. Double click on your printer, and then double click on Customize your printer
3. Click on the Advanced tab, and change the print driver to the one we just installed.
4. If you wish, you can also click on the Sharing tab, and make the printer available.
More information.
Installing Network Printer to Windows Server 2012 Essentials
Hope it helps!
Thanks,
Dharmesh

Webi Rich client - unable to connect to BO 4.0 Server.

Hello All,
we have a same issue while connecting to a BO4.0 server.from WEBI Rich client .
We are able to connect to infoview from browser,and able to open WEBI from browser.
but when tried from WEBI Rich client, we get error : Logon failure due to an internal error.
We have updated the hosts file but did not help.
Please help.
Thanks and regards,
Vinay

What happens if you change your preferences in BILaunch pad, so that the Webi Rich Client is launched when you Modify webi report ?
This way WRC will be launched in 3-tier mode and if succesfull this will indicate that WRC in 2-tier mode can't connect to CMS and FRS due to either Firewall or other problems.
Also, from WRC machine - can you connect using Designer or IDT ?

Outlook clients unable to connect to Exchange / Windows user profile

Exchange 2010
Outlook 2010/2013
I've seen a dozen or so computers in the last few weeks with this problem. The user suddenly cannot connect to the Exchange server in Outlook. (Sorry, I don't have specific error messages for this part.)
If I try a repair on the Email account or try to create a new Mail profile, I get this error:
"The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
I have verified all Exchange and mail security settings. Outlook configuration is not the problem.
I tried deleting %appdata%\microsoft\outlook and %localappdata%\microsoft\outlook.
I tried a repair on Microsoft Office.
I tried creating a new Mail profile for a different email account.
The only thing that has fixed this problem is a completely new Windows user profile, which tells me there is something else broken in the user profile. Does anyone have any idea what it might be?
Blog /
Twitter

Hi,
Please try to access Exchange via OWA.
This issue may occur when the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders registry key does not contain all of the required data. Specifically, these problems occur if the AppData string value is missing from this
registry key.
To resolve this issue, import the User Shell Folders registry key from a working Windows User Profile.
Steps to perform on a working computer
Start Registry Editor. Click Start , type regedit in the Search programs and files box, and then press Enter.
Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
On the File menu, click Export.
Specify the name of the .reg file and then click Save.
Copy the .reg file to the computer exibiting this problem.
Close Registry Editor.
Steps to perform on the computer displaying the above error(s)
Start Registry Editor.
On the File menu click Import.
Locate and select the .reg file exported from the working computer.
Click Open.
Close Registry Editor.
Best Regards.

Email client unable to connect?

Similar Messages

Maybe you are looking for