Email configuration question
Hi-
I'm having a problem configuring my email accounts for my iPhone. I currently use an Exchange email account through school, linked to Outlook 2007 on my computer (PC). I also have a couple of Gmail and Yahoo accounts that I like to download to my iPhone and computer. My iPhone recently had to be restored and now I'm trying to figure out what I have wrong with my new settings.
Currently, my emails all download and display properly on my computer. However, emails display twice on my phone, making it appear that they are showing up as being in both the original account and the Exchange account. This could also be an issue with how my Outlook is setup- I'm not sure- but, given the option, I'd prefer not to store outside emails on my Exchange account.
I apologize for the long-winded question but does anyone have any suggestions?
Thanks!
You need to set the outgoing mail settings to your SMTP server and port. Check you outlook settings, the standard SMTP server port is 225.
Similar Messages
-
CRM Email Router & Email Configuration
Hi All,
I have some question related email router & email configuration in MS CRM 2015. I test using gmail account for both CRM email and contact email (different gmail account).
1. I try send from my gmail to CRM directly, the result is the email not received in CRM. but if I try from CRM to my gmail using email activities first, after email received in my gmail inbox and reply back the email, I have received new email activities
in CRM. my question is why the email not received if I try to send directly?
2. what is email server profile use for? is there any article/link is easy to understand?
thanks.hi Erro,
why I asked is to check if email router machine account is added into the priv user group.
http://msdn.microsoft.com/en-us/library/hh550195(v=crm.6).aspx
regards
Jithesh -
GRC CUP how can i remove auto link "view" display from email configuration
Hi,
When approver/manager gets email.They get display "view" as a link to process the request. How can i remove this and put a full link in email configuration of stages workflow.
Thanks
Yakoob.Hi,
I have a similar query on this. We have a clustered environment for our production GRC CUP system. Access to the CUP system is via a load balanced Webdispatcher.
My question is, when a notification e-mail is sent out from CUP, the "View" link is showing a direct link to one of our clustered server instead of the Webdispatcher link. How can we customize the "View" link?
We need to ensure the approvers are able to access the link via the webdispatcher so that when a failover in the cluster occurs, they are not affected.
Thanks.
Regards,
Daniel Wong -
CRM2013: EMail Configuration Madness
We have CRM2013 deployed, but we are having a number of issues with email configuration. Some of these problems have been down to security and not getting the correct settings, but we are still having issues and I've now decided to go back to basic and start
again.
We are trying to get the Email Router working for outbound mail (as not all our users have Outlook available). At some point other colleagues have tried getting the Server-Side sync working rather than e-mail router.
Now I've got involved I want to return to what I know, and that's the good old Email Router. The question I have is do you still need an "Email Server Profile" setting up in CRM if you're going to use the email router service. The documentation
is ambiguous on this matter with the following paragraph suggesting you do, but is this only for Server-Side Sync?
"Email server profiles in Microsoft Dynamics CRM store settings
that are used by server-side synchronization to connect to an email server and process email for the associated mailboxes. You must configure at least one email server profile to process email for your CRM organization. Depending on the complexity of your
organization’s email system, you may have to create multiple email server profiles."
What is the latest opinion on Email Router vs Server-Side Sync and management?Any
pointers gratefully received.
Steveemail router remains the same from previous versions. Email Server Profile is applicable only for server side synchronization.
regards
Jithesh -
Hi
I am trying to set up Email Configuration in DAC.
step 1. DAC > SETUP> Email Recipients - Provide all the necessary information.
step 2. Tools > Dac Server Management > Dac Server Setup > Email Configuration and also DB connection information.
Now my question do we need to create any "Email Task" as a additional one in the Execution plan or by default if we set the Email configuration will DAC send the notifications?
Thanks,
SMAYou can check the DAC documentation from Oracle. There is a section on Email configuration and what emails are sent for each notification level:
Notification Level
The notification levels are as follows:
•10
Notifies recipient of success or failure of each task.
•5
Notifies recipient of success of failure of the entire ETL process.
•1
Notifies recipient that ETL completed successfully.
if this was helpful, please mark as correct or helpful. -
Hi
i hav questions regarding email configuration::
1) I want to know if it is possible to receive in SOST an alert message, when we send a message from a SAP to an email address which it has the mailbox full... it is possible to receive an information with a mailbox full message?
2) how to configure an automatic reprocessing of all messages that failed, that is I send a message from a SAP system to an email address but it fails, is there any way to sent again this message automatically in SOST?
3)how to resend the undelivered messages again to the failed recipent?
Regards
RamRam,
I want to know if it is possible to receive in SOST an alert message, when we send a message from a SAP to an email address which it has the mailbox full... it is possible to receive an information with a mailbox full message?
*You can configure Acknowledge
In SAPconnect administration (transaction SCOT), choose Settings -> Confirmation of receipt.
You have a choice of two settings:
Confirmation of receipt as a rule and select below Option
Confirmation of receipt as a rule
Select SAPconnect expects confirmation of receipt of Internet mails.
If necessary, specify recipients or Internet domains that are not expected to send confirmation of receipt.
Confirmation of receipt as an exception
Select SAPconnect does not expect confirmation of receipt of Internet mails.
If necessary, specify recipients or Internet domains that are expected to send confirmation of receipt.
Choose .
2) how to configure an automatic reprocessing of all messages that failed, that is I send a message from a SAP system to an email address but it fails, is there any way to sent again this message automatically in SOST?
Try the program RSSOSOSTSTAT and create a Variant "Only Errors" and try to schedule in the background (You need to decide on how frequent you want to run the job)
3)how to resend the undelivered messages again to the failed recipent?
If the Recipient is failed, it might be due to various reasons...
Person might have left the company
Invalid email id.
You might need to fix the issue manually for 3rd point.
Thanks,
Arjun -
SAP-JEE, SAP_BUILDT, and SAP_JTECHS and Dev Configuration questions
Hi experts,
I am configuring NWDI for our environment and have a few questions that I'm trying to get my arms around.
I've read we need to check-in SAP-JEE, SAP_BUILDT, and SAP_JTECHS as required components, but I'm confused on the whole check-in vs. import thing.
I placed the 3 files in the correct OS directory and checked them in via the check-in tab on CMS. Next, the files show up in the import queue for the DEV tab. My questions are what do I do next?
1. Do I import them into DEV? If so, what is this actually doing? Is it importing into the actual runtime system (i.e. DEV checkbox and parameters as defined in the landscape configurator for this track)? Or is just importing the file into the DEV buildspace of NWDI system?
2. Same question goes for the Consolidation tab. Do I import them in here as well?
3. Do I need to import them into the QA and Prod systems too? Or do I remove them from the queue?
Development Configuration questions ***
4. When I download the development configuration, I can select DEV or CON workspace. What is the difference? Does DEV point to the sandbox (or central development) runtime system and CONS points to the configuration runtime system as defined in the landscape configurator? Or is this the DEV an CON workspace/buildspace of the NWDI sytem.
5. Does the selection here dictate the starting point for the development? What is an example scenarios when I would choose DEV vs. CON?
6. I have heard about the concept of a maintenance track and a development track. What is the difference and how do they differ from a setup perspective? When would a Developer pick one over the over?
Thanks for any advice
-DaveHi David,
"Check-In" makes SCA known to CMS, "import" will import the content of the SCAs into CBS/DTR.
1. Yes. For these three SCAs specifically (they only contain buildarchives, no sources, no deployarchives) the build archives are imported into the dev buildspace on CBS. If the SCAs contain deployarchives and you have a runtime system configured for the dev system then those deployarchives should get deployed onto the runtime system.
2. Have you seen /people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development ? Sooner or later you will want to.
3. Should be answered indirectly.
4. Dev/Cons correspond to the Dev/Consolidation system in CMS. For each developed SC you have 2 systems with 2 workspaces in DTR for each (inactive/active)
5. You should use dev. I would only use cons for corrections if they can't be done in dev and transported. Note that you will get conflicts in DTR if you do parallel changes in dev and cons.
6. See link in No.2 ?
Regards,
Marc -
Hi experts,
Im trying to test my email configuration under maintenance menu in cfg connectivity option, but when i clic en test email button and after that i give sender and receiver email gives me a error message:
XCE078 The deployed IPO-Step instance currently is deactivated: /vPlatformIDE/com.sap.b1i.vplatform.ide/ipo/vPlatform.ide.ipo/TestEmailConfig
Recommendation
Check for the correctness of your activity or environment or ask your system-administrator for further help.
If you could help me about this ill appreciateHi Fernando,
This is a late reply to your post, but it is for the benefit of anyone reading this thread.
The documentation currently around the SMTP setup & troubleshooting is very poor.
You can resolve this error by going to 'Monitoring' then 'Process Control' and clicking the button 'Clear INCOMMIT Transactions'. It will say something like "1 INCOMMIT Transactions set to final state" and you will be able to keep emailing test emails thereafter.
Note: If you scroll to the bottom of the page mentioned above you will see 'TestEmailConfig' under the heading 'Framework Processes'. The button 'IPO Log' can give you additional details of the transaction.
Good luck!
Kind Regards,
George Mamacos -
Dear all,
I need your help in sending the EWA Report automatically.
I have added the Email recipient in T-code DSWP under my solution.
Also I have configured in T-code SCOT.
For test purpose I manually generated a EWA Report and after the background job SM :EXEC SERVICES, I checked the status of the mail in T-code SCOT,the mail is in waiting state for a long time but when I click on "Start Send proc for Selection", the mail is getting delivered.
Now what should be done to make it automatic?
Thanks,
Regards,
Hasan
NOTE : i referred this thread too.
EarlyWatch Individual Email Configuration - configure email transmissionDear all,
The Issue is solved now.
I can able to send email to the corresponding recipient automatically.
I had problem with two things which created this issue.
Firstly i re-scheduled the SAPCONNECT job in T-code SCOT and then I scheduled the background job SM : EXEC SERVICES correctly, which turned the bottle icon into a report icon after few minutes. N later the Email was sent.
Thank You for all your support
Regards,
Hasan -
Browser "stuck" in email configuration
Hello -
Appreciate your help.
When I use email configuration (to validate or edit an acct), the internet browser then gets "stuck" in that function. I cannot change the home page on Browser Configuration; it simply will not erase or allow write over. (Stuck on: bis.na.blackberry.com/wap?brand=vzw) Also, unfortunately, I do not have other web pages save in History. (BTW, my service is via Verizon, which might be relevant given that the url that refuses to change (vzw equals verizon wireless)).
This bug makes the internet browser essentially non-functional.
Please share info on how to fix and, if available, how to prevent.
Many thanks!
MJWSame thing here. We have two 8330 Curves, and one has the option for a Start Page and Default Search Provider under the Browser Configuration menu, while the other does not. It's the one without these options that is stuck in the email configuration screen.
Message Edited by Artisan on 05-16-2009 01:20 PM -
Configuration question on css11506
Hi
One of our vip with 4 local servers, currently has https. the http is redirected to https.
Now, my client has problem which a seriel directories need use http, not https. some thing like. quistion:
1. If there is any possible, I can configure the vip to filter the special directories and let them to use http not https. and rest pages and directories redirect to https?
2. If not, I can make another vip to use same local servers, but, is possible to only limited to special directories? and with wild code? some like the directories are partially wild coded, something like, http://web.domain/casedir*/casenumber?
3. if not on both option, is any way I can fix this problem?
Any comments will be appreciated
Thanks in advance
JulieI run my Tangosol cluster with 12 nodes on 3
machines(each machine with 4 cache server nodes). I
have 2 important configuration questions. Appreciate
if you can answer them ASAP.
- My requirement is that I need only 10000 objects to
be in cluster so that the resources can be freed upon
when other caches are loaded. I configured the
<high-units> to be 10000 but I am not sure if this is
per node or for the whole cluster. I see that the
total number of objects in the cluster goes till
15800 objects even when I configured for the 10K as
high-units (there is some free memory on servers in
this case). Can you please explain this?
It is per backing map, which is practically per node in case of distributed caches.
- Is there an easy way to know the memory stats of
the cluster? The memory command on the cluster
doesn't seem to be giving me the correct stats. Is
there any other utility that I can use?
Yes, you can get this and quite a number of other information via JMX. Please check this wiki page for more information.
I started all the nodes with the same configuration
as below. Can you please answer the above questions
ASAP?
<distributed-scheme>
<scheme-name>TestScheme</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme>
<high-units>10000</high-units>
<eviction-policy>LRU</eviction-policy>
<expiry-delay>1d</expiry-delay>
<flush-delay>1h</flush-delay>
</local-scheme>
</backing-map-scheme>
</distributed-scheme>
Thanks
RaviBest regards,
Robert -
Configuration Question on local-scheme and high-units
I run my Tangosol cluster with 12 nodes on 3 machines(each machine with 4 cache server nodes). I have 2 important configuration questions. Appreciate if you can answer them ASAP.
- My requirement is that I need only 10000 objects to be in cluster so that the resources can be freed upon when other caches are loaded. I configured the <high-units> to be 10000 but I am not sure if this is per node or for the whole cluster. I see that the total number of objects in the cluster goes till 15800 objects even when I configured for the 10K as high-units (there is some free memory on servers in this case). Can you please explain this?
- Is there an easy way to know the memory stats of the cluster? The memory command on the cluster doesn't seem to be giving me the correct stats. Is there any other utility that I can use?
I started all the nodes with the same configuration as below. Can you please answer the above questions ASAP?
<distributed-scheme>
<scheme-name>TestScheme</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme>
<high-units>10000</high-units>
<eviction-policy>LRU</eviction-policy>
<expiry-delay>1d</expiry-delay>
<flush-delay>1h</flush-delay>
</local-scheme>
</backing-map-scheme>
</distributed-scheme>
Thanks
RaviI run my Tangosol cluster with 12 nodes on 3
machines(each machine with 4 cache server nodes). I
have 2 important configuration questions. Appreciate
if you can answer them ASAP.
- My requirement is that I need only 10000 objects to
be in cluster so that the resources can be freed upon
when other caches are loaded. I configured the
<high-units> to be 10000 but I am not sure if this is
per node or for the whole cluster. I see that the
total number of objects in the cluster goes till
15800 objects even when I configured for the 10K as
high-units (there is some free memory on servers in
this case). Can you please explain this?
It is per backing map, which is practically per node in case of distributed caches.
- Is there an easy way to know the memory stats of
the cluster? The memory command on the cluster
doesn't seem to be giving me the correct stats. Is
there any other utility that I can use?
Yes, you can get this and quite a number of other information via JMX. Please check this wiki page for more information.
I started all the nodes with the same configuration
as below. Can you please answer the above questions
ASAP?
<distributed-scheme>
<scheme-name>TestScheme</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme>
<high-units>10000</high-units>
<eviction-policy>LRU</eviction-policy>
<expiry-delay>1d</expiry-delay>
<flush-delay>1h</flush-delay>
</local-scheme>
</backing-map-scheme>
</distributed-scheme>
Thanks
RaviBest regards,
Robert -
Automation of Email configurations and Connection-Factories
Hi All,
I have a requirement to Automate the Email configuration settings and Connection-Factories i.e. "ns_emails.xml" and "oc4j-ra.xml" using ant.
Can anyone please help me in providing the functions required?
Thanks,
Ankit C<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by anuragj:
Hi all,
Is there any simple Pl/SQL way of sending emails from ORACLE database.Please note that I am using ORACLE 8i Release 8.1.5(and not 8.1.6 where we have utl_smtp package).Actually I want to automate email generation from ORACLE DB so that emails are fired everyday evening depending on some daily changes in Database due to whole days transactions.
Please suggest any simple and efficient way to do this..
Thanx in Advance
anurag <HR></BLOCKQUOTE>
Currently I am trying to do this via java. Having a few problems trying to implement the examples but you might try note: 120994.1 in Metalink. Or send an email to [email protected] and I will send you the full article. -
How do I get my outgoing email configurations for Profile Manager to work properly?
Hey there,
The outgoing mailservers for users with a custom domain Outlook.com system keep getting @imap-mailoutlook.com appended to their outgoing mailserver, this stops the outgoing emails from working properly.
These are the email configuration settings for one of these accounts:
Thanks so much in advance,
HamualThe problem fixed itself when I uninstalled ZumoDrive free cloud storage and also Growl the notifier application. Had to employ AppZapper to uninstall all related files.... but all worked a treat. All is back to normal.
-
Email configuration for Samsung Bada 1.2
Hi, Do beehive support Bada 1.2, can anyone share the email configuration settings.
The answer is NO. Oracle Beehive only provides support for BlackBerry, iPhone and Android. Not even Windows phones :(
But yes you can configure Beehive email on any phone. You can see the settings here:
The information contained on this page will guide you to configure your Mobile Device device for use with Beehive Email.
Other mobile phones may be used, but will not be guaranteed to be compatible with Beehive.
Configuration Steps
Assuming your Mobile Device has an IMAP/SMTP Client, you may use the information below to get emails.
IMAP Configuration:
Server = stbeehive.oracle.com, port = 993, use SSL/TLS
Username = Beehive SSO username, eg. [email protected]
Password = Beehive SSO password
SMTP Configuration:
Server = stbeehive.oracle.com, port = 465, use SSL
Username = Beehive SSO username, eg. [email protected]
Password = Beehive SSO password
This works on my Nokia Phone and should work on your Samsung Bada as well!
Maybe you are looking for
-
How toStore the Date Variable and pass it when the program runs next time??
HI All, My JDBC program basically needs two command line args. Rabge_Start_Dt and Range_End_Dt. for ex: 2001-05-31 and 2001-06-01 . And my porgram should run every day. Next day the date range will be 2001-06-01 to some date. It means I have to store
-
How can I remove apps that I downloaded and removed from "purchased" at App Store?
How can I remove some apps that I downloaded and removed from "purchased" list at App Store?? Thanks Vic
-
I downloaded the new version of iTunes, and now, I cannot get into the iTunes Store.
-
Hi, recently i purchased the nokia 3120 classic mobile phone phone model & cam is good recently i m facing one issue is not showing missed calls anyone please tell me the solution for this issue Thanks S.Gobinath
-
I upgraded to the new iphone operating system and now i can sign into imessage
I just updated to the new operating system for my iphone 4s but now I cant sign into imessage as it always says my network connection is not good but I am using the network for the other apps