Email content editor is blank After upgrade ios8

when I create new email or reply or forward email, editor show me blank.  Can write but can not see, show me blank content.

Hello there, flyfrog.
The following Knowledge Base article offers up some great steps for troubleshooting issues when iOS is not functioning as expected. When performing Step 1, I would recommend closing all apps:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected,  restart your device.
If the device remains unresponsive or does not turn on (or power on),  reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • Thunderbird: Email contents display as blank after renaming or deleting a folder

    After deleting or renaming an email folder we find that, on choosing another folder, all email is blank. That is the headers are displayed correctly but on clicking these to view the message body the lower panel is entirely blank. This applies to all subsequent folders selected.
    On closing and re-opening ThunderBird the folders and email display correctly again.
    We wound back to an earlier version and the problem does not exist. Have switched off updating.
    Does anyone have any ideas?
    Details:
    We have this problem with version 28.X to present, including Betas.
    No problem with version 24.X and earlier.
    imap using Dovecot 2.2.10 on Centos 7.0.1406
    Many thanks,
    Ewan Crawford

    Dear Matt,
    Very many thanks indeed for your quick reply. We have tried that, but no luck I'm afraid. Only closing and re-opening Thunderbird gets round this problem.
    I am aware that the page
    http://kb.mozillazine.org/Disappearing_mail
    advises closing and re-opening, but we'd like to avoid this if possible.
    Best wishes,
    Ewan

  • My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    Hi, I had this same problem. I have a load of work subfolders and was showing the message header but no content. I think it lost the link to the original messages.
    There may be a simpler way but I fixed it by going to the mail folders in finder. I took the following steps:
    Go to user library (hold down the alt key whilst clicking the Go menu in finder to access user library)
    Go to user/Library/Mail/V2/Mailboxes. You should be able to see your mailboxes and your original messages (ending .emlx) after clicking down the hierachy in each mailbox. For some reason mail added a "-2" onto the end of each mailbox which I think has caused the problem.
    Copy each required mailbox (.mbox) onto desktop. I removed the "-2" at this stage to clean things up.
    In Mail, choose File/Import Mailboxes....
    Import data from: Apple Mail. Click continue, navigate to desktop and choose the relevant .mbox folders. Click Choose.
    It should then import the mail to a new folder called import in mail. You can then rename that folder or move the subfolders out.
    I moved the .mbox folders on my desktop to my documents folder as a backup just in case. I then deleted the problem mailboxes from the finders mailboxes folder.
    Problem solved - for me anyway!!
    Hope this helps.

  • Camera iphone 4 cdma blank after upgrade to ios 7.1

    camera iphone 4 cdma blank after upgrade to ios 7.1, before update to ios 7.1 all camera working good (front and rear) but after upgrade my rear camera still black screen but front camera was fine.
    help me plis

    Hello, hidrahmat. 
    Thank you for visiting Apple Support Communities. 
    This article will help your troubleshoot the camera issue with your iPhone.  See the section labeled Camera isn't functioning or has undesired image quality.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    If the issue persists, see the last section labeled Issue not resolved.
    Cheers,
    Jason H.

  • Push email (MS exchange) works intermittently after upgrade to ios 5.1 and ios 5.1.1

    I have an iphone 4 with my office email (MS exchange) account configured. Other accounts are Gmail & iCloud.
    Office email is configured as Push, Gmail as Fetch and iCloud as Push.
    Till ios 5.0.x everything was fine. Office emails were getting pushed and there were no issues.
    However after upgrading/restore to ios 5.1 & then 5.1.1 push email mostly does not work.
    Few observations :
    1. Push email works fine when I am at home on wi-fi.
    2. When I leave home for work (therefore on 3G), mails stop getting pushed. Sometimes they get pushed for a period of 1 to 2 hours. Then they stop
    3. Manually fetching office mails also does not work
    4. Strangle accessing the office webmail site in Safari https://mail.xxxxx.com does NOT work. While i can load other sites in safari, the mail site does not load.
    5. In office sometimes in the lift phone switches from 3G to Edge or no signal and then when out of the lift, suddenly mails get pushed, but then stop after some time.
    6. Moment I get onto wi-fi, push emails start working
    7. There is no issue with accessing gmail.
    8. Other push notifications work (gmail app, facebook notifications etc)
    9. There have been no changes to our MS exchange server
    10. I have tried the usual stuff of resetting network settings, rebooting the phone, killing the mail app, going to airplane mode, deleting the mail a/c and recreating etc etc. But no luck.
    Apart from upgrading/restoring to 5.1 and then 5.1.1, there have been no changes. The upgrades were done OTA, restore from 5.1.1.
    However both times I have not set the phone as new and have restored backups.
    Is anybody facing a similar issue ?
    Any suggestions ?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • Duplicate emails on outlook for mac after upgrading to mavericks

    I was getting duplicate emails on my outlook for mac after upgrading to mavericks
    After reading several websites,  I realise this is a common problem.
    some people suggesting checking " prevent app nap"
    this seemed to work for a while, but is now back again
    it is very difficult to handle, with hundreds of emails downloading each time i log in
    regards
    seema

    Try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • Performance by system and utilization reports are blank after upgrading SCOM 2012 SP1 to SCOM 2012 R2

    Hi Experts,
    We are getting blank Performance reports after upgrading to SCOM 2012 R2.  Can anyone provide fix for this issue?
    All the reports are working fine except Performance by system and utilization report.
    Thanks in advance.
    Regards
    Karthick Malayalan

    Hi Karthick,
    Here are two links for your reference regarding to the blank report issue:
    SCOM 2012 performance by system report and perform by utilization
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/b1b13318-2de5-4940-82a2-a8ce5b832c11/scom-2012-performance-by-system-report-and-perform-by-utilization?forum=operationsmanagerreporting
    Base OS MP Version 6.0.6989.0 Imported? And Now Some Reports Are Partially
    Empty?
    http://thoughtsonopsmgr.blogspot.com/2012/11/base-os-mp-version-6069890-imported-and.htmlRegards,
    Yan Li
    Regards, Yan Li

  • Lost all messages, message app is blank after installing IOS8.3

    Hi I updated my iPhone 5s to IOS8.3 yesterday. Once the update was completed, my iMessage is blank, i.e. the screen turns blank after I click on the message icon.  I had about 2300 un-read text before the install. That number still shows on the icon.  When I click it, my screen becomes blank (except the cell phone / wifi reception beacon and battery on top). The rest is entirely blank. After a while, the app would close and go back to home screen. It feel like the app tries to load my messages, but fails.  I tried the followings things after reading online posts:
    reset network settings - did nothing
    reset settings - did something. my phone seems to start receiving text messages. I saw notices, but the app remains blank when clicked. my phone just vibrates every couple of minutes, like it's receiving messages
    turn off imessage - did something. Once, I saw all my message came back. When I tried to reply to a text, the app closed itself. When I click to open again, the app become blank
    Restore to factory settings - did nothing to messages
    I'm now restoring it to a New Phone - wish me luck

    HI minaqva,
    Sometimes a problem with Thunderbird may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Did this fix your problems? Please report back to us!

  • CRM 4.0 and BI 7.0 - CRM Workbooks are blank after upgrade to BI 7.0

    We have upgraded to BI 7.0 SP13. When executing CRM reports they return no data. It appears that the variants are not being passed correctly to BW to extract the data. We have run all of the required programs to convert variants after upgrade.
    This is very urgent. Any suggestions would be greatly appreciated.
    Thank you,
    Teri
    Message was edited by:
            teri chandler

    Hello Shivani,
    please do not request documentation via E-Mail. Try to share it i.e. in the SDN Wiki.
    Regards
    Gregor

  • Screen blanking after upgrading to OSX10.9.2

    After upgrading to OSX10.9.2  the monitor will randomlly go black.  This never happend prior to upgrading to OSX10.9.2.   Is there a permanant fix or a way I can go back to the previous version OF OSX?

    Recover the backup you made before installing 10.9.2.
    If you didn't backup, you should have.
    https://discussions.apple.com/docs/DOC-1992

  • I'm getting email but can't send after upgrading to IOS 6 yesterday.The message says cannot send mail and connection failed.  What do I do?

    How can make my phone send mail after upgrading to IOS 6 yesterday?  Receiving but fails to send.

    http://www.apple.com/uk/support/iphone/mail/
    It will be your SMTP settings that need correcting see doc above
    You may have to find out the correct settings from your carrier and or
    broadband supplier

  • How to recover missing content of mail folders after upgrade to Maverick?

    When I upgraded my Mac computer to Maverick I lost the content of my mail folders.  The folders are there but there are no emails filed in them.

    Try to re-index:
    Repair & Reindex All Messages in Mail app
    You may encounter an alert from Mail app telling you that the mailbox must be repaired, but you can also do this manually. This is particularly helpful if the search functions of the Mail app have become unreliable.
    Quit out of Mail app and go to the Finder
    Hit Command+Shift+G and go to the following path:
    ~/Library/Mail/V2/MailData/Delete every file that begins with “Envelope Index” (optional but recommended: back up these files to the desktop just in case something goes awry)
    Close the MailData window, then relaunch Mail app to force reindexing
    Like rebuilding the mailbox, the reindexing process can also take a while, depending on how large the mailbox is and how much mail is stored on the computer. Be prepared for a lengthy re-indexation if you have tons (thousands+) of messages in Mail app. When finished, try the search or perform the task that you had issues with before and things should be working as usual again.-These two solutions will fix most common mailbox related issues encountered in OS X Mail, so try them out the next time Mail app is performing strangely. On the mobile side of things, iOS does not have similar forced rebuilding and reindexing options, and thus to resolve similar issues you often have to remove the account from iOS Mail settings and then re-add it to resolve like problems, but that’s a topic for another article.

  • My messages screen is blank after upgrading iPhone 5 to IOS 8

    I upgraded my iPhone 5 to IOS 8 this morning and now my messages screen is blank (white). I can see an incoming message on the screen when the phone is locked but disappears after unlocking. The Messages icon reflects an ever-increasing number of unread messages. Help!!

    Hi ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • S10 carmera went gray blank after upgrade with IN1CAM05WW​1.exe

    I wrongly upgraded it with IN1CAM05WW1.exe and my camera doesn't work anymore. It only shows gray blank picture.
    My S10  info:
    Model name:20015(all black)
    S/N:EB10773975
    MO:R3N039120072
    (1S)59017866
    Could anyone help me?

    Hi - yes I did that last night and unlike rebuilding via control option route, IPLM did not rebuild those files.  It stated they do not exist.  I double checked by "Show Package Contents" and the master of those files is no longer there.  My next move is to go into Time Machine and see if I can restore the library from when the files were still in there (though unseen by iPhoto) and hope the master are still recoverable.  If that doesn't work, then I'm at the point of accepting that perhaps I may have lost 51 photos (1 event) during this upgrade.  I'm still open to suggestions though.

  • Stray email address on my display after upgrade to Yosemite

    I recently upgraded my iMac to Yosemite.   Now, email addresses   (name@domain)  will show up on my screen.  They stay on top of anything and any app that's up on the display.  Everything else is "Underneath" the stray email address.
    I have to shift an app around to see details because the email address covers information under it that an app my be showing.
    Even my screen saver doesn't get rid of these stray email addresses once my desktop comes back.
    The only way to get rid of them is to restart the computer.
    FWIW... I also have a Mac Book Air.  I upgraded it to Yosemite.  The problem does not occur on the Mac Book Air.
    Q.  Is there something I can do?   Is it a problem with Yosemite?
    Thanks
    Rick Conklin
    Wichita, KS
    iMac is early 2009; 3.06 GHz Intel Core 2 Duo; 8GB memory.  24" screen.

    Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

Maybe you are looking for