Email Created Purchase Order to approver

Dear All,
Good Day!
is it possible to be automatic send email to approver the created purchase order
How can i config/setup purchase order to be email to different approver
this is the first time we will do the created purchase order to be send automatic through email to approvers
Thanks in advance
Ermin D. Concepcion

Hi,
Same question you are asking again & again!
Re: Send PO to vendor through e-mail
OK.
In Standard PO to send by E-mail to vendor is possible only after PO final release,if you set Dispatch time as 4 {Send immediately (when saving the application)} in NACE t.code in application EF & in condition record t.code:MN04 for PO message type.
Purchase order to be email to different approve for approving , then go for Workflow.
http://wiki.sdn.sap.com/wiki/display/ABAP/SendanExternalmailthroughSAPBusinessWorkflowandRecieversaddressin+CC
Regards,
Biju K

Similar Messages

ABAP-Workflow : which way to send email after creating Purchase Order ?

Hi expert,
I'm a new workflow so I have not understood about workflow . Please help me ...
Today, I have recieved a request from client as below:
   +    SAP system auto send a email to USER B after creating Purchase Orders by User A.
   *++. USer B open email and click on the link in his/her email and open new transaction to Release this Purchase Order.*
Could you please help me how to do that?
Thank you so much all.

Hi ,
Thank you so much for your quick response.
I found in SAP system 2 workflows:
            WS20000075 : Release of purchase order
            WS11000013 : Complete Purchase Order
Open transaction "SWDD" I have added the step "Send Email" --> Active and Excute --> enter PO number --> system auto send email to USER B.
But I want the system auto semd email after clicking SAVE in transaction"ME21N" , No need enter PO number in SWDD .
How to integrate between ME21N and Workflow? Could you please helpme step by step or sample to do that.?
Thank you so much .

SRM 7.0 Create Purchase Order

Hi SRM Gurus,
We have upgraded from SRM 3.to SRM 7.0.
Our scenario is Extended classic scenario.
click on create Purchase order. Error message is displayed
"table does not contain any data"
I have checked in Define Transaction type for purchase order all the details are there.
Define Transaction type is working for contract,Rfx ,and auction.
It is not working for Purchase order. Which table to check
Can you please give your inputs
Regards
G.Ganesh Kumar

Hi Muthu/Viru
Thanks for the suggestion
I am in SRM 7.0
This issue is resolved and I got another Issue
I have tried to convert the existing SC to a PO . it is not working.
Created a shopping cart ,approved.
Now I converted the SC to P.O. Now all the transaction types were appearing
converted to P.O. but one issue " Please clear the price (or) Set the invoice expected indicator
I could not able to find this in the P.O (SRM 7.0)
Please help
Regards
G.Ganesh Kumar

Discovery System HUJ - Created Purchase Order is not shown...

Hello,
after log on to HUJ, I started the process procurment -> Approve Purchase Requisition and Create Purchase Order. I could read the material and create the Purchase Requisition, but after that, it is not shown. After 60s I get an time out instead...-
How can that be healed?
Peter

customizing problem.
or
field mapping not correct.

Error creating Purchase Order

Hi Gurus,
I've this issue. I'm using SRM 5.0.
I've configured a product category mentioning it needs to go to sourcing only when the vendor is not mentioned. Otherwise it should bypass sourcing and after the last approval the PO has to be created in backend automatically. We are using Classic Scenario. Now i've this issue. When I create a shopping cart without vendor it goes to sourcing cockpit and from there when I fill the vendor information and create purchase order, purchase order gets created in backend. BUT when I provide vendor information in the shopping cart and Order it after all approvals, it doesn't create PO in backend. Instead I see an error in the error logs of Shopping cart mentioning.
<b>"Shopping cart 0040000365: Error creating the follow-on document"
</b>
I see this under <b> Application Monitors > Shopping cart > Local Errors </b>
Could someone please help me if there knows the solution for this or any note available for this.
Regards,
Sam K

Hi Sam,
Check your settings for when Sourcing is carried out. I assume you have setting in
place always external procurement for every product category in place, why every
SC goes to sourcing cockpit. Adjust that setting. You need to work with product
categories to seperate things out or implement BADI for sorting out to individual
needs. In parallel check the settings for the doc type, number range and the follow
on doc to be created from SC.
Cheers,
Claudia

Purchase Order has approved but Status show as Unapproved

Dear All Experts,
I have a Purchase Order need to go throught approval procedure. The Purchase Order has approved by user and add into system and printed out. When second time, open the same Purchase Order, the status show "Unapproved" but the Purchase Order windows header name show Purchase Order [Approved], this make user unable to copy to GRPO. I have try to restore stored procedures in SAP B1, it does not make any changes. The user is using SAP B1 2007A SP0 PL49. Please Advise.

Hi Angie
the purchase order once approved has to be added on to the system after approval if u say that u have added the purchase order after it got approved then that seems to be a concern for that u need to contact ur sap partner or if u are a partner then u need to get in touch with sap to resolve the isssue as it could be because of problem with ur database
but before that please be sure off that u are using the correct way and have sucessfully added the documnt apon approval.
Regards,
Manish

Inputs requried to create purchase order report from flat file

inputs requried to create purchase order report from flat file

At a guess, I'd say purchase order data.
If you don't give us a clue what you are actually trying to do we can't really help you too much.
Do you want to call a BAPI? Do a BDC? Use an IDOC? Or just generally muck up the system by doing inserts into the purchasing tables?
No doubt if you tell us, you'll get lots and lots of suggestions.
Gareth.

Can we create purchase order through report programming?

hi experts.....
can we create purchase order through report programming?If yes plz give me the thread details?

Hi,
Use this code in a program by using a BAPI function module
Anothe rway is using classical/ALV report using call transaction from a report for changing the PO
loop at i_header.
    header-ref_1         = i_header-legacy.
    headerx-ref_1        = c_x.
    header-doc_type      = i_header-bsart.
    headerx-doc_type     = c_x.
    header-comp_code     = i_header-bukrs.
    headerx-comp_code    = c_x.
    header-purch_org     = i_header-ekorg.
    headerx-purch_org    = c_x.
    header-pur_group     = i_header-ekgrp.
    headerx-pur_group    = c_x.
    header-vendor        = i_header-lifnr.
    headerx-vendor       = c_x.
    concatenate i_header-bedat+4(4)
                i_header-bedat+0(2)
                i_header-bedat+2(2)
                into header-doc_date.
    headerx-doc_date     = c_x.
    header-created_by    = i_header-ernam.
    headerx-created_by   = c_x.
    header-currency      = i_header-waers.
    headerx-currency     = c_x.
    concatenate i_header-kdatb+4(4)
                i_header-kdatb+0(2)
                i_header-kdatb+2(2)
                into header-vper_start.
    headerx-vper_start   = c_x.
    loop at i_items where legacy = i_header-legacy.
      item-po_item            = i_items-ebelp.
      itemx-po_item           = i_items-ebelp.
      itemx-po_itemx          = c_x.
      if i_header-bsart = 'NB'.
        item-material            = i_items-ematn.
        itemx-material           = c_x.
        schedule-quantity        = i_items-menge * 1000.
        schedulex-quantity       = c_x.
      else.
        item-short_text          = i_items-ematn.
        itemx-short_text         = c_x.
        item-matl_group          = '1000'.
        itemx-matl_group         = c_x.
        schedule-quantity        = '1'.
        schedulex-quantity       = c_x.
      endif.
      item-plant               = i_items-werks.
      itemx-plant              = c_x.
      schedule-po_item         = i_items-ebelp.
      schedule-sched_line      = '1'.
      schedulex-po_item        = i_items-ebelp.
      schedulex-sched_line     = '1'.
      schedulex-po_itemx       = c_x.
      schedulex-sched_linex    = c_x.
      concatenate i_items-eildt+0(2)
                   i_items-eildt+2(2)
                   i_items-eildt+4(4)
                   into schedule-delivery_date.
      schedulex-delivery_date = c_x.
      item-price_unit          = i_items-peinh * 100.
      itemx-price_unit         = c_x.
      item-tax_code            = i_items-mwskz.
      itemx-tax_code           = c_x.
      item-shipping            = i_items-evers.
      itemx-shipping           = c_x.
      account-po_item          = i_items-ebelp.
      accountx-po_item         = i_items-ebelp.
      accountx-po_itemx        = c_x.
      if i_header-bsart = 'FO'.
        item-pckg_no = sy-tabix.
        itemx-pckg_no = 'X'.
        limits-pckg_no        = sy-tabix.
        limits-limit          = i_items-overalllimit.
        limits-exp_value      = i_items-expectedoverall.
        posrvaccessvalues-pckg_no    = sy-tabix.
        posrvaccessvalues-line_no    = '0'.
        posrvaccessvalues-serno_line = '00'.
        posrvaccessvalues-percentage = '100.0'.
        posrvaccessvalues-serial_no = '01'.
        account-serial_no     = '1'.
        accountx-serial_no    = '1'.
        accountx-serial_nox   = c_x.
        account-quantity = '1'.
        accountx-quantity = c_x.
        call function 'CONVERSION_EXIT_ALPHA_INPUT'
          exporting
            input = i_items-kostl
          importing
            output = account-costcenter.
        accountx-costcenter   = c_x.
        call function 'CONVERSION_EXIT_ALPHA_INPUT'
          exporting
            input = i_items-sakto
          importing
            output = account-gl_account.
        accountx-gl_account   = c_x.
        item-acctasscat       = i_items-knttp.
        itemx-acctasscat      = c_x.
        item-item_cat         = i_items-epstp.
        itemx-item_cat        = c_x.
      endif.
      append:item,itemx,schedule,schedulex,account,accountx,limits,posrvaccessvalues.
      clear :item,itemx,schedule,schedulex,account,accountx,limits,posrvaccessvalues.
    endloop.
    call function 'BAPI_PO_CREATE1'
      exporting
        poheader                     = header
        poheaderx                    = headerx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
        importing
        exppurchaseorder             = ponumber
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
        tables
        return                       = return
        poitem                       = item
        poitemx                      = itemx
*   POADDRDELIVERY               =
        poschedule                   = schedule
        poschedulex                  = schedulex
        poaccount                    = account
*   POACCOUNTPROFITSEGMENT       =
        poaccountx                   = accountx
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
        polimits                     = limits
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
   posrvaccessvalues            = posrvaccessvalues.
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
    if ponumber eq space.
      loop at return where type = 'E'.
        clear buffer.
        move-corresponding return to e_return.
        concatenate i_header-legacy e_return into buffer.
        transfer buffer to p2_file.
      endloop.
      move-corresponding i_header to i_eheader.
      transfer i_eheader to p3_file.
      loop at i_items where legacy = i_header-legacy.
        move-corresponding i_items to i_eitems.
        transfer i_eitems to p4_file.
      endloop.
    else.
      commit work and wait.
    endif.
    clear:ponumber,header,headerx,item,itemx,account,accountx,limits,return,schedule,schedulex,posrvaccessvalues.
    refresh:item,itemx,account,accountx,limits,return,schedule,schedulex,posrvaccessvalues.
endloop.
close dataset p2_file.
close dataset p3_file.
close dataset p4_file.
Regards
Krishna

Error while creating purchase order with account assignment category "A"

Dear All,
At the time of creating purchase order with account assignment category A - Asset its throwing error as " GL Account 123400 can not be used"
how to resolve this issue"
Edited by: Matt on Sep 16, 2010 10:09 AM - removed bold tags

HI,
Assign all assets GL to Asset Class
spro --> financial accounting new -->assets accounting --> assets accounting (lean Implementation) --> organization structures --> Assign GL
Hope Help U !
Regards,
Pardeep Malik

How to create purchase order and sales orders

Hi guys,
i want to create sales order in IDES and i need to create purchase order ECC.
depending on that i want to create the idoc for that and i want to send info through xi to the other sys.
will u plz any of u can help me in this query.
Thanks & Regard,
Kalyani..

Hi,
TCODE for purchase order- me22n
TCODE for sales order- va01
Regards,
S.RamNarender

How to trigger workflow for already created purchase order ?

HELLO EXPERTS
let me clear my scenario first . i have 1 purchase order whose workflow is not triggered . means it is showing me message no workflow that have already worked for this object.i have created 1 more purchase order taking reference of this purchase order means both are same same message for this po also. it was happening because event linkage for the business object bus2012 is not activated but now it is enabled and i have created third purchase order with reference to above po means this third po is also same as above 2 no change other than po number but for this workdflow is getting triggered . now i want to trigger workflow for orignal first po but for my first po it is showing me same message that no workflow that have already worked for this object. what i have to do to trigger workflow for this po. i have performed this steps in test system. i have workflow number

Hello !
      You can trigger the workflow from SWUE.Enter bus2012 and created for object type and event respectively.
      Click object key button where enter the purchase order number which have been already created.
      But, why do you want to trigger the workflow again for already created purchase order ?
Regards,
S.Suresh

[Request] Special user-exit we need during creating purchase order

Hi, Gurus!
We need to make specific User-Exit during creating Purchase order.
When user creates/change a PO document (ME21N/22N), SAP has to check the u2018CUSTOMERu2019 filed whether it is BLANK or NOT in Delivery Address tab at ITEM LEVEL.
If there is no value in that field, system will automatically input right value with useru2019s business logic.
Thatu2019s what we want to implement in the future.
If you have any solution or recommendation for this, Please help us.
I really appreciate your help in advance.
Best Rgds;
Ian

For checking user exit - SMOD, you need to activate this exit via CMOD
For Badi - SE18 to check & SE19 to implement
Take the help of your abaper, give him / her your logic.
Hope the above answers your query.
Regards,
Vivek

Not able to create purchase orders

Hi Experts,
I am not able to create purchase order , it is not allowing me to save , I I am giving purchase requisition number in Po and trying to crete po .When i give purchase requistion number all the revelant data is copied and when i click on item level tab of delivery address following error occurs : Address doesn't exist T001W 2000 00010. Then the entire PO is cancelled. not able to save going out of po screen
Please give me your valuable advice so that it can help me in resolving this issue
Please do the need ful
Regards
Ayub

Hi
We had to change the name text of he plant from ABCD COMPANY TO ABCD COMPANY PRIVATE LTD so , we had change and in both name 1:ABCD COMPANY PRIVATE LTD and NAme 2: ABCD COMPANY PRIVATE LTD
but in print out it the plant name appearing twice we decided to to erase name 1 that is we left blank and gave name 2:ABCD COMPANY PRIVATE LTD
But while creatimg Po from req ad the clicking item level adress tab eror pops up , and if i click on error tick mark it will take you out from Po screen
Regards
Ayub

Issue while creating Purchase order (ME21N)

Hi Friends,
Hope U Have a Good Day...
My issue is while creating purchase order , I enter vendor and in org.data tab I enter Pur.Org,company code and purchase group. After entering these values if I check in communication tab, the sales person and telephone fields are filled with corresponding data.
Now my requirement is after entering Pur.Org, Company code and purchase group, and if I go and check in Communication tab, these two fields ( sales person, telephone ) should be blank.
Please help me in this issue...
Thanks & Regards
Ganesh Reddy

Hi Ganesh,
This is being fetched frm the vendor master and if u wan this field to be blank
Then u hav to remove those data frm the vendor master .
Put tat vendor, comp code n purchase org
Then select pur org data alon - >chk in purch data
u can find tat sales person n telp no being appeared in the PO
lemme know if u hav any prob in getting tat .

Update was terminated while creating purchase order from ME21N

Hi Experts,
We are getting this dump when try to create purchase order from ME21N;
Our system ECC 6.0 and IS-AFS (Apparel & Footwear Solution) V600 component has installed,
How can we prevent this error,
Regards
Here is the dump and sm21 log,
Runtime Errors         LOAD_PROGRAM_NOT_FOUND
Exception              CX_SY_PROGRAM_NOT_FOUND
Date and Time          10.10.2008 10:22:03
Short text
     Program "RMCMS431 " not found.
What happened?
     There are several possibilities:
     Error in the ABAP Application Program
     The current ABAP program "SAPLMCS4" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     or
     Error in the SAP kernel.
     The current ABAP "SAPLMCS4" program had to be terminated because the
     ABAP processor detected an internal system error.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
     caught in
    procedure "TMC2F_FROUT_CALL" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely "RMCMS431 ".
    However, program "RMCMS431 " does not exist in the library.
    Possible reasons:
    a) Wrong program name specified in an external PERFORM or
       SUBMIT or, when defining a new transaction, a new
       dialog module or a new function module.
    b) Transport error
How to correct the error
    Check the last transports to the R/3 System.
    Are changes currently being made to the program "SAPLMCS4"?
    Has the correct program been entered in table TSTC for Transaction "ME21N "?
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "LOAD_PROGRAM_NOT_FOUND" "CX_SY_PROGRAM_NOT_FOUND"
    "SAPLMCS4" or "LMCS4F10"
    "TMC2F_FROUT_CALL"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "TMC2F_FROUT_CALL" "(FORM)", or its possible occurrence must be declared in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
sm21 log ;
Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20081010102203saptest_TET_00 EYUCE 100
Update terminated
> Update key: F39796DD5421F1509233001E0BD601E0
> Update module: MCE_STATISTICS_UPD_V2
Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred

Please follow the oss note 800335
V2 Update terminations in Purchasing transactions after upgrading or installing AFS 5.0 release.
Other terms
AFS, LIS, MIGO, ME22N, OLI3, S433, S431
Reason and Prerequisites
AFS Purchasing infostructure S431 is no longer used. S433 is the valid infostructure for the release AFS 5.0.
Solution
Please do the following.
For customers upgrading to AFS 5.0 only:
> Rebuild Infostructure S433.
- Goto transaction: OLI3 (Statistical Set up of Infostructures)
- Info structure to be compile: S433
- Specify the 'Name of run'.
- Execute.
> Please also follow the instructions given below.
For both Upgrade and Non-upgrade Customers:
> Create the report 'ZDELS431'.
- Transaction: SE38
- Give Program name as ZDELS431.
- Create (F5).
- Title : 'Program to delete S431'.
- Type : 1 (Executable Program).
- Status: T (Test Program).
> Copy the program text from the note and paste in the program.
> Save and activate the program.
> Execute the report for all clients in Update mode.
(Two check-boxes will appear: P_ALL_CL, P_UPDATE.
   Please check both of them).
This report will delete all the references to infostructure S431.

Email Created Purchase Order to approver

Similar Messages

Maybe you are looking for