Email destination mapping

I've configured an 'EMAIL' batch to use an SMTP server to email generated docs to recipients. However, I'm confused as to where I can find the 'DocumentRequest' element being used for the email address?
Clearly, there must be a mapping somewhere!?
Thanks,
Steve.

Hi Steve,
Are you using Enterprise Edition? What version? If you are using enterprise edition you can look in the Enterprise Administration Guide (http://docs.oracle.com/cd/E17552_01/documaker_enterprise_ag.pdf)
It has this to say about using email on page 14
"Enterprise Edition lets you distribute document sets by email for a named user
with specific contact information. The distribution process for email relies upon
the presence of an email address in the ADR_EMAIL column of the RCPS table.
This column is populated by addressee logic that applies address-specific
information to an instance of a recipient identified in the MRL. If you want to
use this functionality, apply an address map to a specific recipient within the
MRL by updating the recipient within the Business Definition (BDF) file. You
access the BDF file using Documaker Studio. For more information, see the
Documaker Studio User Guide."
-DA

Similar Messages

Schedule a job with email destination in BOXI R2 with email format as html

Hello Guys, would it to possible to schedule a job with email destination in BOXI R2 with email format as html? we are able to get it running with plain text email format. we use Java SDK to interface with BO Enterprise servers.
thanks for your thoughts,
Venkat

Hi
your job should SMOF_DOWNLOAD can bring new material master if you set up correctly.
as a smart method smof_download is the best way.
doble check your filter condition. it should work as you expected. because we dont involve in manual pulling...
check your variant once again. in vari table,
can you check r3ac1 - filter settings- source seetingsa--> source site nmae --> backendlogical system and filter sync..
br
Muthu

BOE XI 3.1 Adaptive Job Server Email Destination

Hi Everyone,
Does anyone know if there is a way to enable a secure transport protocol (like TLS) for email destinations on the AdaptiveJobServer?
I was able to setup an email destination and schedule Webi reports successfully, but I was unable to find anything more secure.
Thanks

I didn't think that it was possible. As far as implementation SMTP over TLS is a possibility although this means more SSL certificates to manage.
Thanks,
Steve

AVS - Multiple destination Mapping

Hi All,
I Deployed AVS with ACE 6504E bundle,we just want to configure multiple destinationm mappings inthe AVS box. What i heard in AVS we have to define different port no's for different VIP's .But when i applied a new VIP with new port no: it not wroking at all.... if anyone has tried it ..please get me solution...
Regadrs
Aslam ...

The application appliance uses destination mapping to proxy requests to a specified destination IP address and port number or hostname and port. The application appliance supports wide scope mapping and host header mapping.
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/avs/v50/user/guide/aDescr.html#wp1040886

SMS Messaging Email Destination

Hi there:
Noticed I am receiving some SMS text messages as emails as well. Currently they are coming to [email protected] I would like to change that to [email protected] Is there a user setting in the Verizon Wireless web client that will allow me to change the email destination address? Could be related to Vtext.
Thanks!!

Jennifer, hi:
Thanks for following up!
Two questions:
1. Navigating to the link you provided (http://bit.ly/MFfK6S) takes me to a VZW.COM page. None of the options (e.g. “preferences”) are hyperlinked. The only nav option from that page is “Register Today” (“and start taking advantage of these free and easy to use features.”). Thing is, I’m already registered…and the link takes me to the Verizon Wireless login page. When I’m logged in on the same browser session, I still get the “Register Today” link.
2. My question actually did not go to creating a nickname at vzwpix.com. Rather, I am receiving actual emails, like the goofy spam item that came in today (enclosed). These are addressed to an actual email address although they appear to be in a message category. What I am trying to figure out is where at VZW these messages are originating so I can change the destination from << email addresses removed >>
Much obliged for your assistance!
-James
<< Personal information removed to comply with Verizon Wireless Terms of Service >>
Re: SMS Messaging Email Destination
Message was edited by: Verizon Moderator

SMTP Email Destination Default Settings Valid

Can some one help me how to set the SMTP Email Destination Default Settings Valid status in metrics tab of DesktopJob Server from false to true?

In the CMC:
1. Go to Servers.
2. Right-click on the Destination Job Server and select Properties.
3. Select "Destination".
4. Make sure that "Email" is one of the configured destinations. If it's not, you'll need to add it. If it is, you need to make sure it's configured correctly.
5. Right-click on the Crystal Job Server and select Properties.
6. Select 'Destination".
7. Make sure that "Email" is one of the configured destinations. If it's not, you'll need to add it. If it is, you need to make sure it's configured correctly.
Now you can reschedule your report.
have a look into below link. This may also help you out.
http://www.forumtopics.com/busobj/viewtopic.php?t=166577&start=0&postdays=0&postorder=asc&sid=9c78ea57cbde41c740bdd27054a42ce9
it is necessary to enable the targer email in the following Servers
- AdaptiveJobServer
- DestinationJobServer
- PublicationJobServer

Generate error email in mapping.

Hi,
If the account number in the source data type isn't numeric I need my message mapping to not create the destination IDOC and instead generate an email explaining why the mapping failed.
Is this possible in PI 7.1?
Thanks

Hi Gareth,
You can achieve this in 1:N graphical mapping. With 2 messages in the target side of Message Mapping.
One the IDoc and second the Mail Package. With a simple If condition you can create an IDoc or a mail based on the Account Number field in the source.
For usage of Mail package refer:
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
Regards,
Aravind.

How to set a dynamic email destinator ...

Hi.
I've completed my mail scenario, adding an attachment as a CVS file.
Now i have two doubts. In my payload i have two fields. FILE and EMAIL.
I would like to use the email as the receiver of the email (message protocol : XIALL) and the FILE as the name of the attachment FILE.
I've done something similar but with file adapter, using 'Variable Substitution' but in Receiver mail adapter i haven't this option.
Any idea of how to do that?
Regards.

Hi ,
In the file adapter you can give the inputs for mail adapter destination . But if you want to give it dynamically check out the URL.
End of the doc.
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/content.htm
Regards
Vijaya

2 recipients in email destination list receiving duplicate reports

I have scheduled 3 reports that have a large list of email recipients, where two of the recipients are receiving the same instance of the email with report attachment twice. I have already verified that the two email recipients are not listed more than once in the destination and that there are no email groups of which they are members included in the destination. I have verified with 3 other recipients in the list to insure that they are only receiving one instance of the report. Can anyone help with this?

Thanks for your comment, however, I have already verified that duplicate instances are not the issue (only one instance is in our Instance manager for the reports in question).
I am still looking for any other ideas.

Allowing access for few emails through mapping file.

Hi All,
First of all thank God for this forum, was so badly stuck.
I have iplanet messaging server 5.2 i know its old but i need to find a way out.
We have recently migrated few users of our domain to different server, lets say domain name is domain1.com
I have a rule in mapping file under Send_Access section.
tcp_noscan|*|tcp_intranet|*@domain1.com $N$D30|Relaying$ blocked
Now this rules kills all the mails going out of the server.
I tried adding the migrated users as
tcp_noscan|*|tcp_intranet|[email protected] $Y
I tried adding this line above as well as below the blocking rule but it doesn't work.
Please can someone help me out.
Edited by: Ramraj-2407 on Dec 16, 2009 10:43 PM

I tried sending mail locally from server using telnet.
=========================================
17-Dec-2009 16:54:18.09 tcp_intranet tcp_scan E 1 [email protected] rfc822;[email protected] @mail.domain1.com:[email protected]
17-Dec-2009 16:54:18.59 tcp_scan D 1 [email protected] rfc822;[email protected] @mail.domain1.com:[email protected] dns;127.0.0.1 (inet01.domain1.com SMTP; Thu, 17 Dec 2009 16:54:17 +0800) smtp;250 <[email protected]>... Recipient ok
17-Dec-2009 16:54:19.75 tcp_noscan J 0 [email protected] rfc822; [email protected] 550 5.7.1 Relaying not allowed: [email protected]
17-Dec-2009 16:54:20.57 tcp_noscan J 0 [email protected] rfc822; [email protected] 550 5.7.1 unknown host or domain: [email protected]
====================================
I also tested it by using
imsmta test -rewrite -debug -source_channel=tcp_noscan -destination_channel=tcp_intranet [email protected]
and it gave error "Rellaying Not allowed"
I have refered your both links
http://docs.sun.com/app/docs/doc/819-4428/bgauo?a=viewand one more you had given in the forum
but I fail to understand the flow of rules.
Can you pls explain me as in which order does the rule flow, as in iptables or any firewall rules the rule which matches first is accepted.
But it seems to be different in this case.
Also do I need to add $E at the end of the rule. Pls explain

How do you change the email destination when you forgot your security question?

Hey! First of all, Thank you for noticing my post! Haha
Alright.. Soo.. This Apple ID was made a long time ago since my iPhone 5 was bought. I was planning to buy an ingame item but Vertification was needed so I was like yeah ok sure. XD Then it started giving me Security questions.
I'm extremely sure I forgot both of the answers to my Security Questions so I decided to change it.
I Went to Appleid.apple.com, logged in successfully, pressed the forgot the answer and it was said to sent to a YAHOO Email.
I used to have this Yahoo Email but I forgot about it since Yahoo decided to deactivate due to inactivement so now I can't change my security answers so I can't proceed with my purchase.
I was wondering if there's a way to change the email ( yahoo ) to my current gmail since I'm way more active on it and I
can access it easier..?

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a rescue email address or a Security Questions issue, then see:
         If you forgot the answers to your Apple ID security questions - Apple Support.
         Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

Best way to send GR document to email destination output printing

When a goods receipt document is printed, I need to send an email with the document attached. It does not matter if it goes to an external email address or to the SAPoffice (Workplace).
If it can not be triggered during GR output creation, I could just do it when the GR is processed.
What is the best approach? Can this be done in output determination or is there a user exit?
Thanks!
Norm

This looks very helpful, but I still have one problem.
The requirement will allow me to check the PLANT. This is perfect. However, I can only set this up once per condition type.
Details...
I am using WE03. WE03 needs to print. I cannot define a requirement to stop WE03 for email, because it will stop it from printing.
In SD, I would create a new output condition for email (like ZE03). I could have a requirement on ZE03 to check PLANT and use it for email.
I thought there were issues with new output types in MM. The standard SAP processing programs have values hard coded. I remember seeing things like "WE" being concatenated to "03" to form "WE03" in standard SAP code. New output types like ZE03 will not work.
Maybe this has changed? Maybe I am wrong?
I will try it.

Multi destination map feature

Is there any app out there where I can enter multiple destinations (addresses) at one time from my current location?

Not that I'm aware of, no. If you mean the addition or 'waypoints' (i.e. directions from point A to point C with a stop at point B on the way), you might suggest that feature to Apple.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

Scheduling Report through InfoView - Destination Email

My question pertains to InfoView in Crystal Report Server 2008. I am trying to set up a scheduled report to run once, and be emailed as a pdf to my own email address. I am using the administrator account and can successfully do this through the CMC, but when I try to schedule the report through InfoView, the destination always reverts back to the Inbox destination rather than the email destination. The job has a successful status, but the destination is always the Inbox.
I am fairly confident my job servers are set up with the proper SMTP information since I am successful when trying this through the CMC and I am setting everything the same through InfoView.
Any ideas?

Hello,
This is Crystal Report Server 2008 and I guess Business Objects Enterprise 3.0.
When scheduling a report through InfoView I do the following:
Recurrence - Now
Format - I choose PDF, although it doesn't really matter for the problem I am having.
Destination - I choose email from the dropdown, there is no checkbox to ignore the defaults. I have to input my own information. I populate the From, To, and Subject boxes. I also choose to have an attachment sent.
I click the Schedule button and I am taken to the History window. The job has a status of Running. I choose refresh and the job completes with a status of Success. However, when I click the status and the Instance Details are shown, the external destination line reads as Inbox and no email is delivered. The report is delivered to the InfoView user's inbox, but not in an email as I selected.
This process works when performed through the CMC, but not through InfoView.
Edited by: vtrujillo on Oct 8, 2009 5:13 PM

-1 email? contacts not showing up in Maps?

recently i've been having some issues with the email and map features.
one of my gmail accounts constantly has a "-1" email hanging around. it will show up as "-1" on my front screen and will subtract one email from my new email (ex: if i have 4 new messages in this account, it will show on the accounts screen that i only have 3).
also, lately contacts will not show up when i'm using maps but they still show up in my contacts list. say i'm looking for directions to a friend's house and type in the first couple letters of their name. names from my contact list will show, but no address, even if i press the name on the pop-up list. also, if i press the "bookmark" button in the address field and then select a contact, it still won't bring up an address for that contact.
this has only started happening since i upgraded to 1.1.3.
any ideas? i've tried restarting the iphone several times but it changes nothing. i'll probably try resetting everything, but i still don't know if this will fix anything if it's software related.

seriously, am i the only one having these problems?
any suggestions on how i might fix them?

Email destination mapping

Similar Messages

Maybe you are looking for