Email does not move from GWAPI to Exchange

NW 6.5 sp4
GW7
GWAPI 4.1 with patch 5
I get email from Exchange into GroupWise fine. Email leaving Groupwise
bound for Exchange fails.
I have watched the message flow and the mail seems to move from PO, to MTA,
to Gateway, and out. The gateway seems to lose the message becasue it never
shows in Exchange..
I can see the message go to the PO:
13:20:52 D59 MTP: File sent: 44FD79B3.PM1 Queue: 4 Size: 3092
Then it goes to the MTA:
13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4: Routing
earth/gwdatav:\grpwise\ravendom\mslocal\gwinprog\4\00136 e41.PM4 (4 kb)
13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4 Priority 4 44FD79B3.B54:86:46400 :
Transfer to Exchange.First Administrative Group
13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4: Message queued:
earth/gwdatav:\grpwise\ravendom\mslocal\mshold\excfb87\4 \00136e41.001
13:20:57 35F Exchange Gateway: Releasing message:
earth/gwdatav:\grpwise\ravendom\mslocal\mshold\excfb87\4 \00136e41.001
13:20:57 35F Exchange Gateway: Message queued:
earth/gwdatav:\grpwise\ravendom\wpgate\API41\wpcsout\exc fb87\4\44fd79b9.PM0
All I see in the API gateway log is:
09-05-06 13:21:22 OK
09-05-06 13:21:22 {GWEREQST:GweFindRequests
09-05-06 13:21:22 {GWEADFOT:GweSelFirstDest
09-05-06 13:21:22 {GWEADFOT:do_sel_dest
09-05-06 13:21:22 }GWEADFOT:do_sel_dest
09-05-06 13:21:22 }GWEADFOT:GweSelFirstDest
09-05-06 13:21:22 }GWEREQST:GweFindRequests
09-05-06 13:21:22 OK
09-05-06 13:21:22 Processing outbound message...
09-05-06 13:21:22 Error getting information from the GroupWise message
09-05-06 13:21:22 Info - No active recipients
09-05-06 13:21:22 {GweBody:GweCloseMsgFile
09-05-06 13:21:22 {GWEADLIB:GweCheckWpMsg
09-05-06 13:21:22 }GWEADLIB:GweCheckWpMsg
09-05-06 13:21:22 {GweBody:GweFindFirstAttachmentField
09-05-06 13:21:22 }GweBody:GweFindFirstAttachmentField
09-05-06 13:21:22 FALSE
09-05-06 13:21:22 }GweBody:GweCloseMsgFile
09-05-06 13:21:22 OK
09-05-06 13:21:22 {GweBody:GweOpenMsgFile
09-05-06 13:21:22 }GweBody:GweOpenMsgFile
09-05-06 13:21:22 No Files
I can watch the file land in the \API41\wpcsout\excfb87\4 directory and then
disappear but I have no idea where it goes?

Made the initial Gateway using ConsoleOne. Once created I used NWADMIN and
followed thru the doc. I basically started at page 116 of the
e23interopmig.doc. We always got stuck at the one tab where it looks for
"Required Parameters". The foreign domain was done as per this doc. If you
look at an older MS doc some of the instructions are somewhat screwy and
never made sense when it came to creating the Foreign domain etc etc. We
concentrated on getting the basic test done of sending mail to these folders
(page 129), once this worked everything fell into place.
D
"Robin Witkop-Staub" <[email protected]> wrote in
message news:[email protected]...
> Did you make all our objects for the migration via NWADMIN?
>
> "Dave" <[email protected]> wrote in message
> news:[email protected]...
>> Do you see the messages hitting the API gateway on the server running the
>> API? I am talking about the actual console screen on the server for the
>> API. For example our API gateway name is Exchange. In the GW client email
>> an account, real or otherwise to dummyuser:Exchange. This will force it
>> thru the API. You should see the files show up as inbound messages and
>> then they will sit in these 2 folders because they have no where to go.
>> Also do you see the messages coming back thru the API at the server? The
>> ones inbound from the Exchange. I am as green as it comes on this so if I
>> am revisiting what you have already checked I apologize.
>>
>> D
>>
>> "Robin Witkop-Staub" <[email protected]> wrote in
>> message news:[email protected]...
>>> We do have the MS guide and followed it - some of it gets vague but we
>>> believe we followed the right path. I got the NWadmin 5.5 snapins and
>>> modified the address format from groupwise to composite. Everything is
>>> so close to working but the GW email just sits "host pending".
>>>
>>> When in the process should the email file land in the
>>> RAVENDOM\WPGATE\API\ATT_OUT and API_OUT. All I can see is it going to
>>> the \API41\wpcsout\excfb87\4 directory? I cant seem to catch anything in
>>> the other directories. And even though the message fails it never goes
>>> to a GWPROB directory either?
>>>
>>> I have checked and the non-groupwise domain has a link to the exchange
>>> gateway.
>>>
>>> I created the objects (non groupwise domain, external post office, and
>>> exchange API41 gateway sp5, in ConsoleOne. I modified the gateway to
>>> change the address formatting and the gateway file paths to show the
>>> volume/dir path instead of map drive letter. is the procedure you used?
>>>
>>> I do not have an MTA for the non groupwise domain but traffic is routing
>>> thru my main MTA so I assume this was OK. Am I suppose to have a
>>> different MTA for the non groupwise one?
>>>
>>>
>>>
>>> "Dave" <[email protected]> wrote in message
>>> news:[email protected]...
>>>> We just went thru this last week. GW7 to a new Exchange 2003
>>>> environment. Have a look on the MS site for "Microsoft Exchange Server
>>>> 2003 Interoperability and Migration Guide. Follow this and you will
>>>> have great success. Having the correct snap-ins with NWADMIN is also
>>>> the key to all of this as I found out last week. One of the first
>>>> things you need to check are the files getting to the
>>>> RAVENDOM\WPGATE\API\ATT_OUT and API_OUT folder. If the body and header
>>>> don't drop into these folders you have a problem.
>>>>
>>>> Dave
>>>>
>>>> "Robin Witkop-Staub" <[email protected]> wrote in
>>>> message news:[email protected]...
>>>>>I verified that it was created an a non-groupwise domain. Then inside
>>>>>that is an external port office where all the exchange accounts are
>>>>>synching to.
>>>>>
>>>>> "Dana Palmer" <[email protected]> wrote in message
>>>>> news:[email protected]...
>>>>>> Robin Witkop-Staub wrote:
>>>>>>> NW 6.5 sp4
>>>>>>> GW7
>>>>>>> GWAPI 4.1 with patch 5
>>>>>>>
>>>>>>> I get email from Exchange into GroupWise fine. Email leaving
>>>>>>> Groupwise bound for Exchange fails.
>>>>>>> I have watched the message flow and the mail seems to move from PO,
>>>>>>> to MTA, to Gateway, and out. The gateway seems to lose the message
>>>>>>> becasue it never shows in Exchange..
>>>>>>>
>>>>>>> I can see the message go to the PO:
>>>>>>>
>>>>>>> 13:20:52 D59 MTP: File sent: 44FD79B3.PM1 Queue: 4 Size: 3092
>>>>>>>
>>>>>>> Then it goes to the MTA:
>>>>>>>
>>>>>>> 13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4: Routing
>>>>>>> earth/gwdatav:\grpwise\ravendom\mslocal\gwinprog\4\00136 e41.PM4 (4
>>>>>>> kb)
>>>>>>>
>>>>>>> 13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4 Priority 4
>>>>>>> 44FD79B3.B54:86:46400 : Transfer to Exchange.First Administrative
>>>>>>> Group
>>>>>>>
>>>>>>> 13:20:56 D7F RTR: RAVENCORP: 00136e41.PM4: Message queued:
>>>>>>> earth/gwdatav:\grpwise\ravendom\mslocal\mshold\excfb87\4 \00136e41.001
>>>>>>>
>>>>>>> 13:20:57 35F Exchange Gateway: Releasing message:
>>>>>>> earth/gwdatav:\grpwise\ravendom\mslocal\mshold\excfb87\4 \00136e41.001
>>>>>>>
>>>>>>> 13:20:57 35F Exchange Gateway: Message queued:
>>>>>>> earth/gwdatav:\grpwise\ravendom\wpgate\API41\wpcsout\exc fb87\4\44fd79b9.PM0
>>>>>>>
>>>>>>> All I see in the API gateway log is:
>>>>>>>
>>>>>>> 09-05-06 13:21:22 OK
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GWEREQST:GweFindRequests
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GWEADFOT:GweSelFirstDest
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GWEADFOT:do_sel_dest
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GWEADFOT:do_sel_dest
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GWEADFOT:GweSelFirstDest
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GWEREQST:GweFindRequests
>>>>>>>
>>>>>>> 09-05-06 13:21:22 OK
>>>>>>>
>>>>>>> 09-05-06 13:21:22 Processing outbound message...
>>>>>>>
>>>>>>> 09-05-06 13:21:22 Error getting information from the GroupWise
>>>>>>> message
>>>>>>>
>>>>>>> 09-05-06 13:21:22 Info - No active recipients
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GweBody:GweCloseMsgFile
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GWEADLIB:GweCheckWpMsg
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GWEADLIB:GweCheckWpMsg
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GweBody:GweFindFirstAttachmentField
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GweBody:GweFindFirstAttachmentField
>>>>>>>
>>>>>>> 09-05-06 13:21:22 FALSE
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GweBody:GweCloseMsgFile
>>>>>>>
>>>>>>> 09-05-06 13:21:22 OK
>>>>>>>
>>>>>>> 09-05-06 13:21:22 {GweBody:GweOpenMsgFile
>>>>>>>
>>>>>>> 09-05-06 13:21:22 }GweBody:GweOpenMsgFile
>>>>>>>
>>>>>>> 09-05-06 13:21:22 No Files
>>>>>>>
>>>>>>> I can watch the file land in the \API41\wpcsout\excfb87\4 directory
>>>>>>> and then disappear but I have no idea where it goes?
>>>>>>>
>>>>>>>
>>>>>> Sounds like the error, "No active Recipients" is causing the issue.
>>>>>> You need to make sure that the domain representing the Exchange
>>>>>> system in GroupWise is a Non-GroupWise domain and not an External
>>>>>> GroupWise domain.
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Similar Messages

HT1553 my macbook pro is frozen and does not move from loading screen. Can you help?

my macbook pro is frozen and does not move from loading screen. Can you help?

Call Apple Support and schedule a appointment for a hardware check, or take it into a Apple Store.
We can't help you with that problem.
Good Luck

My I pod touch 5th one month old wont charge. Its on charger for 2 days but battery does not move from red sign?

My I pod touch 5th one month old wont charge. Its on charger for 2 days but battery does not move from red sign?

Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Deleting iphone email does not delete from computer

I am sure I must be missing something simple here....When I delete email from my iphone, it does not delete from my computer (either remotely or by syncing). So when I delete a bunch of emails, the very next time I open iphone email, it retrieves the very same emails just deleted....a viscious cycle. Can anyone assist with what must be a simple setting issue? Thank you.

Nathan C:
Thank you for your help.
When .Mac is configured using the .Mac option on the
iPhone it is always configured as IMAP. For that
account, on your computer are you checking the
messages via POP3, and on your computer, which
program are you using to check those messages?
.MAC Account - Home Computer: Under Mail/Preferences/Accounts it lists the Comcast account (from our ISP) as a POP and the .Mac account as ".Mac". I access mail thru Mac Mail Application and sometimes thru .mac thru the internet. Update on this account- I cleared the inbox and tried another test. Now it seems to be working. I delete a message from iphone and it will automatically delete from my home computer Mail App. and eventually it will be deleted from the .mac server when accessed thru the internet (these take much longer however). In any event it seem this account works now.
Work Account:
As for your work account, when looking at the
settings, it should say POP3, IMAP and Exchange at
the top. The button that is "pushed" is the one that
account is using. The outgoing server should
probably be smtp.comcast.net not smpt. Is that
account using IMAP, POP3, or Exchange?
I know these three options were there when the IT person set it up but now when I access this account in my iphone it does not tell me what was selected (IMAP,POP, or Exchange) under account information??? It seems to appear only when setting up a new account. Am I missing something?
Also that was a typo. Outgoing server is listed as "smtp.comcast.net"
So to give you as much info as I have:
Incoming Mail Server is "Mail.(officeservername).com" and Outgoing is "smtp.comcast.net". (Using my Comcast ISP was the only way the IT person could get the email access from Iphone to work). And to calrify what is happening on the iphone:
1.Email is accessed no problem from iphone, - downloading all new message from my work outlook works fine.
2.When I delete messages on my iphone, however, it does not delete on my office computer which is on a server network. (Visa Versa does work - when I delete a message on my computer it will delete it on my iphone.
3.NOTE : Contrary to what I posted earlier my iphone now is NOT "RELOADING" messages just deleted from Iphone but which remain on my office computer. This means half the problem is solved.
4. THE ONLY THING LEFT TO FIGURE OUT IS HOW DO I CONFIGURE SO WHEN I DELETE A MESSAGE ON MY IPHONE I AM DELETING ALSO FROM MY Computer at work?
(BTW in the above description I am referring to all wireless operation...not when syncing with iphone)
Any final helpful thoughts? Thanks again.

Item does not move from Workflow Inbox to Work Item Executed by me

Hi experts,
We have implemented workflow inbox for invoice payment. After archive document in OAWD, we will do posting through Workflow inbox. After posting, the item should go to 'work item executed by me' folder. But the problem is the work item is still in the workflow inbox. What should we do? Pls help. This is urgent. Correct answer will be rewarded, TQVM in advanced.
Rgds,
Nanie

Hi Arianie,
First check the status of your WORK ITEM ID. You can check it in SBWP or in SWI6 transaction.
If your work Item ID still remains in the SAP Inbox & does not move into outbox i.e. "work Item Executed by me" then it may happened that your workflow is not triggered after users/responsible agents action completion. You can check the graphical status in SWI6 transaction itself.
Also check whether your Work Item ID's status is not "ERROR" . If it is "ERROR" then you need to resume the work item ID (Whose status is Error) to start/recall the workflow.
Thanks
Pravin

Deleted email from my iphone it does not delete from Outlook 2007

My friend has an iphone 3GS and when she deletes email from the phone it does not delete from her Outlook 2007 account. She has to manually delete it. Outlook2007 is setup to permanantely delete from the server. Any suggestions? Thank you.

Gelz68 wrote:
Any suggestions?
Tell your friend to get an IMAP or Exchange mail account. From what you describe, your friend has a POP account, and that's the way POP accounts work.

End Routine Issue - It does not move data from E_T_RESULT to RESULT_PACKAGE

Hi,
I am facing an issue with end routine. I have gone through previous posts on, how to write end routine and all.I wrote the end routine accordingly.
Here is my scenario,
I have 0CUST_SALES master data , which has all the Sales Org, Distribution Channel and Division, Sold to Party, Sales Grp and Sales Dist.
I am getting , Sold to party and Distribution channel at the field routine.
I am using, Sold to Party and Dist Channel and Division = '01'- whatever i populated using a field routine and trying to get the Sales Org, Sales Grp and Sales Dist at the end routine.
It looks like, all the code that i wrote seems correct but it does not populate any values into RESULT_PACKAGE.
Here is the code I wote at the end routine. I am not sure, whats wrong in it. I used, this link to write this routine :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/203eb778-461d-2c10-60b3-8a94ee91cbfc&overridelayout=true
Global Declaration----
DATA : BEGIN OF IT_CUST_SALES,
    DIV TYPE /bi0/pcust_sales-DIVISION,
    DIST_CH TYPE /bi0/pcust_sales-DISTR_CHAN,
    SALES_ORG TYPE /bi0/pcust_sales-SALESORG,
    CUST_SAL TYPE /bi0/pcust_sales-CUST_SALES,
    SALESDIST TYPE /bi0/pcust_sales-SALES_DIST,
    SALESGRP TYPE /bi0/pcust_sales-SALES_GRP,
    END OF IT_CUST_SALES.
DATA: T_CUST_SALES LIKE TABLE OF IT_CUST_SALES.
Start of End Routine
   SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
    from
    /bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
    RESULT_PACKAGE
    where CUST_SALES = RESULT_PACKAGE-SOLD_TO
     AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
     AND DIVISION = '01'.
    LOOP AT RESULT_PACKAGE INTO e_s_result.
      READ TABLE T_CUST_SALES INTO IT_CUST_SALES
          WITH KEY CUST_SAL = e_s_result-SOLD_TO
             DIST_CH = e_s_result-DISTR_CHAN
             DIV = '01'.
      IF SY-SUBRC EQ 0 .
        MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
        MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
        MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
        APPEND E_S_RESULT TO E_T_RESULT .
      ENDIF.
    ENDLOOP.
    REFRESH RESULT_PACKAGE.
    MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
End End Routine
Data comes into E_T_RESULT but it does not move to RESULT_PACKAGE. Any inputs will be helpful.
Regards,
Kumar

Hi Hegde,
Declaration is same , its like this.
   datA: e_s_result type tys_TG_1.
    data: e_t_result type tyt_TG_1.
I don't know, when i inserted this code in this post, initially it was OK but once i post i also saw , its not that read friendly.
FYI, i am trying to put the code again, lets see if it works.
SELECT DIVISION DISTR_CHAN SALESORG CUST_SALES SALES_DIST SALES_GRP
    from    /bi0/pcust_sales INTO TABLE T_CUST_SALES for all entries in
    RESULT_PACKAGE   where CUST_SALES = RESULT_PACKAGE-SOLD_TO
     AND DISTR_CHAN = RESULT_PACKAGE-DISTR_CHAN
     AND DIVISION = '01'.
    LOOP AT RESULT_PACKAGE INTO e_s_result.
      READ TABLE T_CUST_SALES INTO IT_CUST_SALES
          WITH KEY CUST_SAL = e_s_result-SOLD_TO
             DIST_CH = e_s_result-DISTR_CHAN
             DIV = '01'.
      IF SY-SUBRC EQ 0 .
        MOVE IT_CUST_SALES-SALES_ORG TO E_S_RESULT-SALESORG.
        MOVE IT_CUST_SALES-SALESDIST TO E_S_RESULT-SALES_DIST.
        MOVE IT_CUST_SALES-SALESGRP TO E_S_RESULT-SALES_GRP.
        APPEND E_S_RESULT TO E_T_RESULT .
      ENDIF.
    ENDLOOP.
    REFRESH RESULT_PACKAGE.
    MOVE E_T_RESULT[] TO RESULT_PACKAGE[] .
Regards,
Kumar

I set up my iCloud account on iPad with an exchange account and aol account. I can see exchange and aol emails but not those from .me account or apple email. I got it to show all 3 accounts on my iPhone with no problem. Hat am I missing?

I set up my iCloud account on iPad with an exchange account and aol account. I can see exchange and aol emails but not those from .me account or apple email. I got it to show all 3 accounts on my iPhone with no problem. Hat am I missing?

I'm having a similar problem, but I do have the key and is not working anyway.
My old pc was running on windows 7 and my new one is an apple running on Lion.
My phone is an Iphone IV and I can see all the bookmarks there.
In order to sync, what I did was click on the "I don't have the device with me", I entered the key that was provided and the process finish ok. It says congratulations, etc, etc.
But the bookmarks are not there, I tried merging data and replacing data on this computer options but is the same.
Any suggestions?

Received delivery subsystem error email 25,000 plus times. Can delete easily from my mac but deleting from my inbox on my mac does not delete from inbox on my husband and my iphones. HELP

Received delivery subsystem error email 25,000 plus times. Can delete easily from my mac but deleting from my inbox on my mac does not delete from inbox on my husband and my verizon iphones. HELP

delete and re-add e-mail on iphone and it will update with whats current on the server

TS3276 Email does not show contents, only to and from.

Email does not show contents, only to and from up top. Just started doing this last week. Already deleted account and added it again still same problem.

Mac OS version?

Hi, my apple ID verification email does not contain the link for me to click in order to verify my account. Re-submitting has not worked, what can i do to verify/activate my account

Hi, my apple ID verification email does not contain the link for me to click in order to verify my account. Re-submitting has not worked, what can i do to verify/activate my account in order to access Icloud?

If you want to change your iCloud ID or password on your phone go to Settings>iCloud and tap Delete Account, then sign back in with your updated information. Note: this only deletes the account and any synced data from your phone, not from iCloud. Provided you are signing back into the same account and not changing accounts it will be synced back to your device when you sign back in.

Rdiohead album In Rainbows does not move to iPod

After importing the album, I had two bands with the name Radiohead in the iTunes list (?). In Finder, I found that the original folder was Radiohead while the new one was Radiohead_ . The latter contained In Rainbows album, in the former there were the other albums. After converting the mp3 files in Toast to AAC files I had all the albums in a single Radiohead folder. Here I thought that everything is ok but then it turned out that iTunes does not move the In Rainbows album to iPod. I cannot figure out what's gone wrong. Suggestions? I have never before seen this behavior with iTunes.

Just curious, why did you convert the album from mp3 to AAC?
Converting one lossy format into another simply loses more info along the way and will serve nothing other than to compromise sound quality.

"Exchange organisation does not support this version of Exchange server"

I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
I have already installed exchange Server 2010 in the that domain.
The following the image that show the error that i am facing
I have the checked current Active Directory or Exchange Server schema version by using
Using that i got the following information
"dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
objectVersion = Windows Server 2008 RTM
CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
rangeUpper = 14726 ( Exchange server 2010 sp1)
I am attaching the Exchange server setup logs here
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
[5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
[5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
[5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
[5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
[5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
[5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
[5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
[5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
[5/31/2013 3:04:31 PM] [0] The following roles are unpacked:
[5/31/2013 3:04:31 PM] [0] The following roles are installed:
[5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
[5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
[5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
[5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
[5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
[5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
[5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
[5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
[5/31/2013 3:04:32 PM] [0] Applying default role selection state
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
[5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[5/31/2013 3:04:53 PM] [0] **************
[5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'
[5/31/2013 3:04:53 PM] [1] Beginning processing.
[5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:24 PM] [1] Ending processing.
[5/31/2013 3:05:24 PM] [0] **************
[5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
$true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[5/31/2013 3:05:24 PM] [1] Beginning processing.
[5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:27 PM] [1] Ending processing.
[5/31/2013 3:05:40 PM] [0] End of Setup
[5/31/2013 3:05:40 PM] [0] **********************************************
Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
Thanks

dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine install exchange 2010
Exchange organisation does not support this version of Exchange server
warning
setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
please can u tell me the how install exchange 2010
thanks

Initial postion of image changed but now image does not move

hi can any one solve this problem please, i have been trying to change the initial position of my image when i run it 1st on java textpad......
i seem to have moved the initial position of the image by the following >
public void paint(Graphics g) {
          g.drawImage(CurrentImage,xPos = 10,yPos = 100,this);but now the image does not move when i press the keys in its new position
does anyone one know how to solve this?? if you do please reply THANK you.
the original code is below >
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.io.File;
import java.io.IOException;
import javax.sound.sampled.*;
import javax.sound.midi.*;
import javax.swing.*;
import java.awt.Image.*;
public class Man3 extends Applet implements KeyListener {
     int xPos, yPos;
     Image man1;
     Image man2;
     Image man3;
     Image man4;
     Image man5;
     Image man6;
     Image CurrentImage;
     Image offScreenBuffer;
     AudioClip tune;
     public void init() {
          setBackground(Color.white);
          xPos = this.getSize().width/2;
          yPos = this.getSize().height/2;
          man1 = getImage(getCodeBase(),"man1.gif"); // right hand up
          man2 = getImage(getCodeBase(),"man2.gif"); // straight
          man3 = getImage(getCodeBase(),"man3.gif"); // right hand down
          man4 = getImage(getCodeBase(),"man4.gif"); // left hand up
          man5 = getImage(getCodeBase(),"man5.gif"); // straight
          man6 = getImage(getCodeBase(),"man6.gif"); // left hand down
          CurrentImage = man2; // man facing right
          addKeyListener(this);
          requestFocus();
          tune = getAudioClip(getCodeBase(), "Track.wav");
     public void paint(Graphics g) {
          g.drawImage(CurrentImage,xPos,yPos,this);
     public void checkXmin()
               if (xPos == 0) xPos = 500;
     public void checkXmax()
               if (xPos == 500) xPos = 0;
     public void checkYmin()
               if (yPos == 0) yPos = 350;
     public void checkYmax()
               if (yPos == 350) yPos = 0;
     xPos+=1;
     if (xPos>500) xPos=0;
     if (xPos==0) tune.play();
     // man walks right
     public void checkCurrentImageRight()
               if((CurrentImage == man6)||(CurrentImage == man5)||(CurrentImage == man4))
                    CurrentImage = man2;
               if(CurrentImage == man3)          CurrentImage = man1;
               else if (CurrentImage == man1)     CurrentImage = man3;
               else if(CurrentImage == man2)     CurrentImage = man1;
     // man walks left
     public void checkCurrentImageLeft()
               if((CurrentImage == man3)||(CurrentImage == man2)||(CurrentImage == man1))
                    CurrentImage = man5;
               if(CurrentImage == man6)          CurrentImage = man4;
               else if (CurrentImage == man4)     CurrentImage = man6;
               else if(CurrentImage == man5)     CurrentImage = man4;
     public void keyPressed(KeyEvent evt) {
          int offset;
          int x = evt.getKeyCode();
          if (evt.isShiftDown()) {
               offset = 20;
          else {
               offset = 10;
          switch (x) {
               case (KeyEvent.VK_UP):                     // man goes up
                         checkYmin();
                         //checkCurrentImage(2);
                         yPos -= offset;
                         break;
               case (KeyEvent.VK_DOWN):
                         checkYmax();
                         //checkCurrentImage(2);          // man goes down
                         yPos += offset;
                         break;
               case (KeyEvent.VK_LEFT):               // man walks left
                         checkXmin();
                         checkCurrentImageLeft();
                         xPos -= offset;
                         break;
               case (KeyEvent.VK_RIGHT):               // man walks right
                         checkXmax();
                         checkCurrentImageRight();
                         xPos += offset;
                         break;
          repaint(); // display image
     public void keyTyped(KeyEvent evt) {
     public void keyReleased(KeyEvent evt) {
    public void update(Graphics g)
        // Will hold the graphics context from the offScreenBuffer.
        // We need to make sure we keep our offscreen buffer the same size
        // as the graphics context we're working with.
        if ((offScreenBuffer==null) || (offScreenBuffer.getWidth(this) != getWidth()) || (offScreenBuffer.getHeight(this) != getHeight()))
            xPos = getWidth()/2;
            yPos = getHeight()/2;
            offScreenBuffer = this.createImage(getWidth(), getHeight());
        // We need to use our buffer Image as a Graphics object:
        Graphics gr = offScreenBuffer.getGraphics();
        gr.setColor(getBackground());
        gr.fillRect(0, 0, getWidth(), getHeight());
        paint(gr); // Passes our off-screen buffer to our paint method, which,
        // unsuspecting, paints on it just as it would on the Graphics
        // passed by the browser or applet viewer.
        g.drawImage(offScreenBuffer, 0, 0, this);
        // And now we transfer the info in the buffer onto the
        // graphics context we got from the browser in one smooth
}

Not only is this your 7th or 8th posting on this topic, you can't even wait 15 minutes before bumping the posting.
Your question is no more important than anyone elses on the forum and continually posting, starting new threads on the same topic is one sure way to get your posting ignored.

TS4080 apple thunderbolt display image on display intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys. Rebooting by pressing the power button resolves issue.

My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.

Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
Long shot but...
I wonder if it's a variation of this, of which I've seen many different symptoms...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
1. Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US

Email does not move from GWAPI to Exchange

Similar Messages

Maybe you are looking for