Email font changes on the receiving end

Hello,
When I write an email the font and color of the font are as I intended.
When my email is received, the font size varies through out the email and some words are a light grey.
I've tried to correct this in the settings.
How do I correct this?
Thank you,
Cheryl

I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

Similar Messages

  • I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

    I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

    I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
    If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

  • Incoming email fonts change in Windows 8.1 LIve Mail

    Some, but not all incoming email fonts change to almost unreadable block fonts when arriving at Windows Live Mail.  It seems to be happening on forwarded items only.    Suggestions on how to stop this, or change fonts when it occurs would be most welcome.
    On same general subject, is it possible to change size of incoming email fonts in Windows 8.1?

    John, welcome to the forum.
    Open Windows Live Mail.  Click on the blue "File" in the upper left corner.  Then, Options / Mail / Read / Fonts (lower middle of page) / Font size.  There you can change the size of the font. I believe that it should come set to "Medium".  You can change it by clicking on the drop-down menu.
    Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • I just updated my software to 5.1.1. and when i text my email shows up on the receiver's phone

    i just updated my software to 5.1.1. and when i text my email shows up on the receiver's phone

    Until your phone number is verified and activated you won't be able to select it in Caller ID. (You will probably notice that it says "waiting for activation'" under iMessage.)  This has been widely discussed in this forum and there is no one solution that works for everyone.  If you search the forum for "iMessage waiting for activation" you'll get a number of posts on this; you may find a solution that will work for you.  Some of these include:
    Go to Settings>General>Date & Time, make sure Set Automatically is set to On.
    Be sure you are able to send and receive messages.
    Call your carrier to see if they are blocking premium texts or third party texts.
    Also make sure in Settings>General>Date & Time that Set Automatically is turned to ON.  If not turn it on then go to Settings>General>Reset>Reset Network Settings
    Change the DNS servers on their wireless router to  8.8.8.8 and 8.8.4.4 (these are Google's Public DNS servers)

  • Ipad2 face time low and static audio at the receiving end

    iPad 2 face time audio is very low and  alot of static at the receiving end. Any suggestions on how to have a clear sound?

    Hi tizoast,
    Umm, Odd.
    You seem to be saying that iChat has the correct Mic/sound input slected in the drop down in iChat > Preferences > Video section > Drop down.
    You also see to have the setting in Sytem Preferences > Sound > Input tab.
    You say that recording in other apps is ok with this set up and we have looked at the Bit rate of the MIDI device in the post above.
    At this time I can not thimk of anything more to try.
    I will sleep on this and post again if I think of anything.
    Edit: Possibly deleting com.apple.ichat.plist will make iChat reset the readings it is getting from other sources.
    Deleting this and restarting ichat recreates the .plist but you lose any saved Status Message, Font style, Bubble colours and other less visible things like Individual sound alerts.
    10:26 PM Friday; September 29, 2006
    10:23 PM Friday; September 29, 2006

  • Oracle DB at the receiver end

    Hi All,
    I have a scenario to insert/update/create product details into oracle backend from SAP. If the product is not available, the product should be created along with update of different details into Oracle DB tables. Does anyone worked on this type of scenario in which Oracle is at the receiver end (JDBC adapter). What are the best practices to follow? Please send across advices/weblogs or links if any.
    Thanks
    Deno

    Hi,
    you can either use : UPDATE_INSERT action
    in the sql document format
    or you can check if product exists (in a BPM) and do the insert/update
    based on that info
    but if you use the product then you must use some sort of application right?
    maybe at first try checking if there already are some
    products interfaces ?
    as if there are any they would handle all
    of the checks etc (like BAPIs)
    it's always better to use interfaces then
    direct jdbc inserts...
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • When i send an email in greek characters the receiver gets only questionmarks.  how can i troubleshoot this?

    when i send an email in greek characters the receiver gets only question marks.  how can i troubleshoot this?

    Microsoft has finally addressed this issue!
    You need to download and install the 14.2.4 update (110MB) for Office 2011 from here: http://www.microsoft.com/en-us/download/details.aspx?id=34690
    Unfortunately, if you have been lazy with updating you will also need to download:
    Service Pack 1 (14.1.0), 247MB: http://www.microsoft.com/en-us/download/details.aspx?id=17198
    [Service Pack 2 (14.2.0), 110MB: http://www.microsoft.com/en-us/download/details.aspx?id=29419 -> you don't have to download this]
    Update 14.2.3, 110MB: http://www.microsoft.com/en-us/download/details.aspx?id=30214
    These are all pre-required...
    This update adds the ability to select a default text encoding for composing new messages.The encoding that is selected in composing preferences will be applied to all new messages that are sent from Mac Outlook. To access composing preferences, select Outlook, select Preferences, and then select Composing. The new preference is Preferred encoding for new messages. (From: http://support.microsoft.com/kb/2742588/en-us?fr=1 )

  • When using facetime, my picture is not seen on the receiving end. How do i fix?

    When using FaceTime, my picture is not seen on the receiving end.  Help!

    Part of training the junk filter is also to mark good messages 'As Not Junk'.
    http://kb.mozillazine.org/Junk_Mail_Controls#Training_the_Junk_Mail_Controls

  • Amplitude is not changing on the receiver side

    I am trying to transmit square wave using USRP 2920. If I change the amplitude of square wave in Tx file from 1 to lets say 100. The Tx waveform shows that it is changed but on the receiver side there is no change in the amplitude. Can any body look at my files and guide me why I am not able to see increase in amplitude on Rx file when I increase the amplitude of Square wave on Tx file
    Note: I am generating a randon number between 0 to 1. If random no. is greater than 0.5 then the amplitude is 1 or higher but if the random no. is less than 0.5 amplitude will be zero.
    Thanks 
    JK
    Attachments:
    TX.vi ‏23 KB
    RX.vi ‏34 KB

    Your not going to get a clean squarewave back on the receive side. The USRP uses a local oscillator (LO) so anything it reads will be interpreted as sinusoidal in nature. This is evedent in the screen shots in the attached .zip folder. 
    To address your voltage question, assuming your antenna is terminated with a characteristic impedance of 50 Ohms (Zo) and the max power of 100 mW, Power = (approximately) Voltage^2 / Zo
    Therefore Voltage = ( Power * Zo ) ^ (1/2) = 2.2 Volts approximately. 
    What is your overall application? Why are you concerned about the voltage? What are you testing?
    Brad S.
    Application Engineering
    National Instruments
    Attachments:
    USRP.zip ‏216 KB

  • Unable to Receive Files at the Receiver end

    Hello All,
    I have configured scenario Proxy to File with 1:2 transformation (Interface collections) ie
    1 Sender and  Receiver Service
    1 Sender interface
    2 Receiver interface
    1 Message and interface mapping
    1 Receiver determination
    1 Interface determination
    2 Receiver file channel with FCC
    The QoS is Exactly Once.
    My scenario is failing at Adapter Engine (Receiver end) failing to create 2 text files.
    My Question is
    1. The Status of the File Receiver channel in monitoring are in error status displaying "Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error: invalid receiver channel 'a3478068e95133a8ad28777a3fe1344d'" What is the reason for this ? I checked the Cache update and cache is upto date.
    2.In SXMB_MONI , When Checked the trace part of Receiver Determination it correctly displays
    "<Trace level="2" type="T">Number of Receivers:1</Trace> "
    But when i checked Trace for Interface Determination it is displaying " InterfaceCollection</Trace>
      <Trace level="2" type="T">...valid InbIf without Condition: InterfaceCollection</Trace>
      <Trace level="2" type="T">Number of receiving Interfaces:1</Trace> "
    Here it should display "Number of receiving Interfaces:2 " Right?   What is the reason for this ? do we have todo multimapping?
    3.In Message monitoring for Adapter Engine i could see messages in Holding state. what is the specific reason in his case (I know the literal/functional meaning) of messages going to holding state  . "Maintain Order at Runtime" is checked in Interface Determination?
    May I know in which situation the messages would goto into holding state (isit because IE was not able to find 2 receiver interface)  and without unchecking the "Maintain Order at Runtime" option and manual intervention isit possible to process the scenario successfully?
    Many thanks in Advance .
    Regards,
    Pavithra

    Hello Ninad,
    Since I am using EHP 1 SAP NetWeaver PI 7.11 , there is no explicit option of selecting "Enhanced Interface Determination" ( Its understood implicitly through the Signature tab in Message mapping (1:n transformation)) and I have done multimapping as message mapping (In the mapping editor, switch to the Signature tab page) for my scenario
    The cache (AE) is perfectly fine
    I am noting down my observation here.
    My scenario uses QoS EO and the " Maintain Order at Runtime" option was checked. There were many System error messages due to other issues for the previous month and holding messages for this month.
    I guess due to this the channels were in  error though the channels' status were in green but it was displaying message " Message processing failed. Cause:com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error: invalid receiver channel '1ac04de4d1103d09b5b9c764c8895e98'"
    Now I filtered all the 'system error' messages with Sequence Id and deleted all of them and Resent all the holding messages and there were no message in holding .Now again i tried sending some data's ...the channel are functioning fine and no such error messages are displayed
    Regards,
    Pavithra

  • How to create the Data Type for the receiver end?

    Hello Expertise
    I wanted to Create a Data type for  Receiver end in PI.
    Sender end is ECC.
    Receiver end is SRM
    Here's the Data type for Sender end  as
    Can anyone help to create the Data type for Receiver end i.e SRM.
    Thanks in advance.
    Regards
    karan

    Hi Karan,
    Please don't call Sir, we are just trying to help each other.
    Please go through below scenario's and check your configuration.
    ABAP Client Proxy to ABAP Server Proxy Scenario - Process Integration - SCN Wiki
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=true
    http://wiki.scn.sap.com/wiki/display/XI/Step-by-step+FTP+to+ABAP+Proxy
    regards,
    Harish

  • Changes to the Back-end....Bringing it on to the Front-end

    Hello All,
    I would like to know the means of reflecting the changes made to the back-end tables on to the front end. Say we've a departments table and an ADF UIX page displaying the data from it in the front-end... we make certain modifications to the back-end table.. Now how do I bring it on to the already existing front-end UIX page. Could anyone give me a solution for this. Thanks in advance.
    Regards,
    Arun.V

    Hi,
    If you have navigated to the employees from selected department (ie, all the employees on the page are from the same department) then you can just drag the department name onto the page to create the bindings and display the department name.
    If you are going direct to empoyees in a read only table an easy solution is to create a business component based on a database view that joins the two tables and presents the employee details and the department name.
    create or replace view emp_dept as
    select e.emp_id,
           e.emp_name,
           d.dept_id,
           d.dept_name
    from emp e,
         dept d
    where e.dept_id = d.dept_id; If you want to edit an employee then create a view link to a ViewObject which represents just employees using the employee id. On the single record edit page use a message choice to translate the department id into the department name.
    Brenden

  • My emails appear to be tagged as "junk" on the receiving end. How can I fix this?

    When I go into my online Outlook account, I see that emails have been sent (they're in my "sent" folder). But a test message sent to my wife went to her Junk Mail. When I forwarded the original message from the "sent" folder, it went directly to her inbox. Is there a missing tag of some sort?

    Part of training the junk filter is also to mark good messages 'As Not Junk'.
    http://kb.mozillazine.org/Junk_Mail_Controls#Training_the_Junk_Mail_Controls

  • Tree table is not reflecting the updated model data changes at the front end

    I have two tables ,
    1) Provider table(tree table)  2)member table
    I have implemented drag and drop functionality using jQuery UI on both tables.
    In my scenario when I drag a member from the member table and drop it on the Provider table and also when I delete an assigned member from the provider table I will update the data fetched from odata model and again I will call the method which binds the data to the provider table so that the table will reflect the changes.
    here is the code,
    on drop:
    $("#Provider tbody tr").droppable({
      drop: function(event){
           oController.AssignMember(oProviderId, oMemberId)
      }).disableSelection();
    Assign member function:   here am updating the model.
    AssignMember : function(oProviderId, oMemberId){
      var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
      var oParameters = {};
      oParameters.PROVIDER_ID = oProviderId;
      oParameters.MEMBER_ID = oMemberId;
      oParameters.CREATED_ON = new Date();
      oModel.setHeaders({"content-type" : "application/json;charset=utf-8"});
      oModel.create( "/PROVIDERMEMBERS", oParameters, null, function() {
      var oController = sap.ui.controller("adsm.provider.member_assignment_view");
      oController.GetProviderData();
      },function(jqXHR) {
      var errorMessage = jqXHR.response.body;
      var jsondata = JSON.parse(errorMessage);
      sap.ui.commons.MessageBox.alert(jsondata.error.message.value);
    GetProviderData function: here i bind the data to the table
    GetProviderData: function(){
    var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
    var Context = "/PROVIDERS?expand=ASSIGNEDMEMBERS&$select=NAME,ID,ASSIGNEDMEMBERS/NAME,ASSIGNEDMEMBERS/ID,ASSIGNEDMEMBERS/PROVIDER_ID";
      var oTable = sap.ui.getCore().byId("tblProviders");
      oModel.read(Context, null, null, true, onSuccess, onError);
      function onSuccess(oEventdata){
      var outputJson = {};
      var p = 0;
      var r = {};
      if (oEventdata) {
      r = oEventdata;
      try {
      if (oEventdata.d){
      r = oEventdata.d;
      } catch(e){
      //alert('oEventdata.d failed');
      try {
      if (oEventdata.d.results){
      r = oEventdata.d.results;
      } catch(e){
      //alert('oEventdata.d.results failed');
      try {
      if (oEventdata.results){
      r = oEventdata.results;
      } catch(e){
      //alert('oEventdata.results failed');
      $.each(r, function(i, j) {
      outputJson[p] = {};
      outputJson[p]["NAME"] = j.NAME;
      outputJson[p]["ID"] = j.ID;
      outputJson[p]["PROVIDER_ID"] = j.ID;
      outputJson[p]["DELETE"] = 0;
      var m = 0;
      if (j.ASSIGNEDMEMBERS.results.length > 0) {
      $.each(j.ASSIGNEDMEMBERS.results, function(a,b) {
      outputJson[p][m] = { NAME: b.NAME,
      ID : b.ID,
      PROVIDER_ID: b.PROVIDER_ID,
      DELETE: 1};
      m++;
      p++;
    var oModel = new sap.ui.model.json.JSONModel();
      oModel.setData(outputJson);
      oTable.setModel(oModel);
      function onError(oEvent){
      console.log("Error on Provider Members");
    oTable.bindRows({
      path:"/"
    Its working fine in chrome but in IE the model data gets updated but the table is not reflecting the changes at front end.Can anyone suggest me a possible solution to fix this?
    Please have a look at the attached screen shots.
    Best regards,
    Amala Suganya.

    Hi Amala,
    I think this will help you:
    Disabling Cache for CRUD/FI OData scenarios for a UI5 Application on Internet Explorer
    Kind regards,
    RW

  • Font changes in the last line of paragraph when printing

    InDesign CS3 (5.0.2), Dell P4, 3Ghz, 1gb ram
    This is a one page document with about half a page of text and some graphics. When printing to HP Laserjet, everything prints fine. When printing to Lanier 2138 color laser, everything prints fine EXCEPT for the last line of the second paragraph.
    The text changes to an unrecognizable font. (The rest of the document uses Trebuchet.) It does happen on the line after a hyphenated word, but we've put the entire word on the last line (eliminating the hyphen) and get the same results.
    As I mentioned, the entire page prints perfectly to the HP black and white laserjet. It also prints perfectly to the Lanier 2138 *IF* we create a PDF first and THEN send it to the 2138.
    I've checked the knowledgebase and searched this forum, but haven't seen anything related to this issue. Any help or ideas is greatly appreciated.
    Thanks in advance for your time.
    Todd

    Todd,
    That field is the font style field, not a "Paragraph" field. It just happens to be next to the button that changes the control panel to paragraph mode.
    Is the file you posted the same one you made the jpeg from, or the one where you changed that field to "regular"? I'm thinking the latter, because the paragraph shows regular when I highlight it. Also, I don't think the font in the jpeg has changed, just it is printing gibberish on that last line.
    Try this: File > Export and for type choose Interchange format (.inx). Open that file in InDesign and save again as an InDesign document. See if that prints.
    If not, I'd say it's almost certainly the driver.
    Peter

Maybe you are looking for