Email for multiple locations (phone and pc's)
It seems that if i pull emails onto my phone and then delete them before I pull them onto my pc, they can't be downloaded onto my pc anymore. I know there is a setting in Outlook to "Leave a copy of messages on server". Is there a way to set this same setting on my phone?? I think I may have just deleted messages for the last week for three accounts!! thinking I would still have them on my pc.
kanderson88 wrote:
I have three accounts that are pop accounts. All are godaddy accts, if that helps...
Hi kanderson88,
While your phone can be synched with your email accounts to pull emails, delete, forward and perform other email functions, only your email account settings determine how those incoming emails are processed. If you want your email server to retain a copy of all incoming emails for you to pull at your convenience from your PC even if you delete emails from your mobile handset please contact your email provider for assistance with your email server settings.
Similar Messages
-
Device Channel Rules for All mobile phones and Tablets?
I am developing master pages for different devices, my target is to develop different master page for Desktop, Mobile phones and Tablet.
Default device channel works for desktops, “$FallbackMobileUserAgent" works for both mobile phones and tablets but I want to design different master
page for all tablets.
Is there any fall back rule that targets all tablets? and any rule that targets mobile phones only?
Update: I found "ipad" and "iphone" inclusion rule works across all apple devices.Hi,
According to your post, my understanding is that you want to create rule that targets mobile phones or tablets only.
Per my knowledge, channels control which master page is used to show your site on for example iPhone or iPad. Channels are bound to master pages, and channels are bound to user agent string of device in use (phone, tablet or PC).
You need to supply different user agent substrings and order of device channels.
For more information, you can refer to:
http://msdn.microsoft.com/en-us/library/office/jj862343(v=office.15).aspx
http://sp2013.blogspot.com/2012/07/channels-in-sharepoint-2013.html
http://jussionsharepoint.com/targeting-multiple-browsers-and-devices-in-sharepoint-2013-using-device-channels/
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support -
Action to send email for multiple recipients
Hi gurus,
Currently the user needs to send a email for multiples recipients according to the organization structure.
For example:
The user generates a complaint and the systems must notify by email the department responsible to solve this complaint, sending an email for all employees assigned into this organizational unit.
How should I configure the action to send an email for the whole departament?
Best Regards,
Gabriel SantanaHI Gabriel,
Get the email ID's of all the recipents from orgunit using FMs <b>RH_STRUC_GET</b> and <b>BAPI_BUPA_ADDRESS_GETDETAIL</b> into internal table <b>et_mailid</b> and then using FM <b>SO_NEW_DOCUMENT_ATT_SEND_API1</b>.
For reference check the code below:
<b>*i_message has contents of mail body</b>
DATA: g_sent_all(1) TYPE c,
g_doc_data LIKE sodocchgi1,
DATA: i_message LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
Fill the document data.
g_doc_data-doc_size = 1.
Populate the subject/generic message attributes
g_doc_data-obj_langu = sy-langu.
g_doc_data-obj_name = 'SAPRPT'.
CONCATENATE g_sdltime0(2) ':' g_sdltime2(2) ':' g_sdltime+4(2) INTO g_time.
CONCATENATE c_subject g_time INTO g_doc_data-obj_descr SEPARATED BY space.
g_doc_data-sensitivty = 'F'.
Describe the body of the message
Information about structure of data tables
CLEAR i_packing_list.
REFRESH i_packing_list.
i_packing_list-transf_bin = space.
i_packing_list-head_start = 1.
i_packing_list-head_num = 0.
i_packing_list-body_start = 1.
DESCRIBE TABLE i_message LINES i_packing_list-body_num.
i_packing_list-doc_type = 'RAW'.
APPEND i_packing_list.
Add the recipients email address
LOOP AT et_mailid.
CLEAR i_receivers.
i_receivers-receiver = et_mailid-email_id.
i_receivers-rec_type = 'U'.
i_receivers-com_type = 'INT'.
i_receivers-notif_del = 'X'.
i_receivers-notif_ndel = 'X'.
APPEND i_receivers.
ENDLOOP.
Call the FM to post the message to SAPMAIL
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = g_doc_data
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = g_sent_all
TABLES
packing_list = i_packing_list
contents_txt = i_message
receivers = i_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Regards,
Amit
*Always reward points for helpful answers
Message was edited by:
Amit Kumar -
How can I get safe internet for protect my phone and PC
How can I get safe internet for protect my phone and PC. l lose all internet account I've three year. i lose my phone all app for a day even I safe all informating and apps in ICloud but I lose all my phone information . Like I have new phone and I do not have all my date . For new phone i can not use over 10 apps for my phone
You can't. But if you backed up your computer prior to wiping it out, you should be able to restore your iTunes library, contacts, photos, etc. from that backup. Once you do, you can set the phone up again and just sync everything from your library back to it.
If you didn't back the computer up either, you can transfer items purchased on the phone into iTunes, and if you set up at least one contact in whatever application you sync your contacts to on the computer, it will offer to merge the address books on the first sync, saving those. Any media you'd acquired from sources other than the iTunes store will have to be re-downloaded from the source or re-ripped.
The iPhone is NOT a backup device. -
BOM structuring for multiple location manufacturing
Hi,
One of the product is manufactured in multiple locations (US and India). Some of the components are different when manufactured in these two locations.
Ex: Steel rod is one of the component of this product and "Brand A" steel rod is used when manufactured in India and "Brand B" steel rod is used when manufactured in US.
This product is highly configurable, so we need to use configurator to arrive at the final bill.
Now question is how do I setup my bill structure (what should be set up in each org and which bill is commoned to Item Validation Org) and how should the configurator be built to get correct BOM, based on where the product is manufactured?
Thanks and Regards,
MutthuWithout R12's option dependent sourcing, you may have an issue.
When you configure a sales order, it will look at the BOM in the item validation org so no matter which org you are in, it will look at the same bill.
You may have to add ROD A and ROD B as optional components of an OC and write rules that will disable RodAif the Org=US and disable RodB when org=India. -
extension mobility - can i have 2 extension mobility profiles with the same extension for a 7970 phone and a 7975 phone? thanks
Yes, or simply configure 1 UDP and default device profile for the other one.
EDIT: and actually with those models, you should be able to use just one
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_011000.html#CUCM_RF_EDCB3C30_00 -
iPhone 4s.used to get swoosh sound every time I got an email. Now I don't and I have to open email for it to connect and get new messages. What do I do?
Once you purchase or download an app it will always be associated with the Apple ID used to download it. When that app requires and update you must use the Apple ID and password used to download it in the first place. The only way around this is to delete the apps the require the old Apple ID and download or purchase them again with the new Apple ID.
-
i have a isic card and i am a student and i want to see if you have any discount for app for apple and for the i phones and if i have the b.o.box in the us can i buy the iPhone from your site
Apple does not offer educational discounts on the iPhone. I don't know what you mean by "app for Apple".
Regards. -
I dropped my iphone 4s in water and everything works but the backlight. I have heard rumors that I can take my damaged iPhone into an apple store and trade it in for a new phone and pay the difference. Is this true?
Apple offers an out of warranty or not covered under the warranty "repair" price, which pays for an exchange at a discounted price off the full retail sales price.
-
My iPad will not charge and every time I charge it. It comes up with the iTunes icon and I will not charge, it is not a new I pad and the same charger I use for the I pad I use for my I phone and it will charge. What is wrong?
What exactlyare you seeing on the iPad's screen ? If it's the iTunes icon and a cable then that means that it's gone into recovery mode - you will need to connect it to your computer's iTunes and you should be able to use that to reset it back to factory defaults and you can then restore/resync your content to it.
-
My txt message settings recently changed to send txts from my Mac email rather than my phone# and there doesn't seem to be a way to change the settings back. The phone# in receive at screen is under intensified so unselectable. Any suggestions?
After reading what you have posted, I checked my iPhone 4S. When looking at messages in settings, my receive at has 2 addresses, my phone number and my Apple ID email address. The phone number is "under intensified" as you describe it. Checking the Caller ID, it shows my phone number and Apple ID email. The phone number is checked. This all seems to be the same as you describe yours. My text messages are all working as they always have, and they are showing as coming from my phone number. Both to people that I iMessage with and people that I can only text with. I'm not sure why you say texts are being sent from your Mac email. Did someone receive a text that shows the email as the return address?
-
my child created a passcode for my i phone and he forgot that what will be the reset procedure
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
I changed my email for my Apple ID, but on my iCloud it's still registered under my old email, but I can't change it. The only option it has for me to do is to delete that account from my phone but I don't want to lose anything I have on my phone that is linked to my iCloud account
If you go to your iTunes account on the computer, where you changed your email account info, you find a link to other changes for your account info. You may have done all that already, if so next you have to change the info on the device.
To change the device info:
Step 1. Connect to iTunes on the computer and on the "Info" page, check the sync info box. You should notice a change in your email info on the screen . Sync device to the computer.
Step 2. note at the bottom of this "Info" screen a note that says to change you iPad info: Go to Settings on the iPad, then Mail, Contacts, Calendars. Change your email account information here. -
Script to count number of emails for multiple users
I am needing a little help with my script. I have this working if I use just a single email address. I need to add a list of 8 emails addresses for this to scan. How would I modify this to send 1 email for all 8 users?
I have seen scripts that make a html file that displays everything in a nice table but those are ran against all users in exchange and I only needs this for a group of 8 users.
Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010
#Powershell Garbage
$nl = [Environment]::NewLine
#Mailbox to gather stats on
$mailbox= "[email protected]"
#Get todays date twice
$startDate=Get-Date
$endDate=Get-Date
#Subtract 1 day from todays date (report ending day) and 7 days from todays date (report starting day)
$startDateFormatted=$startDate.AddDays(-7).ToShortDateString()
$endDateFormatted=$endDate.AddDays(-1).ToShortDateString()
#Who to send the e-mail report to.
#Multiple e-mail addresses should be in this format "<[email protected]>, <[email protected]>"
$emailFrom = "[email protected]"
$emailTo = "[email protected]"
$subject = "Weekly e-mail report for $mailbox for $startDateFormatted - $endDateFormatted"
$smtpServer = "mail.domain.com"
# Sent e-mails
$sendCount = Get-TransportService | Get-MessageTrackingLog -Start "$startDateFormatted 00:00:00" -End "$endDateFormatted 23:59:59" -Sender $mailbox -resultsize unlimited | select-object -unique MessageId
# Received e-mails - This works but not on generic accounts
$receiveCount = Get-TransportService | Get-MessageTrackingLog -Start "$startDateFormatted 00:00:00" -End "$endDateFormatted 23:59:59" -Recipients $mailbox -resultsize unlimited | select-object -unique MessageId
$sendCountString = $sendCount.count
$receiveCountString = $receiveCount.count
$body = "Mailbox stats for: $mailbox $nl
Report date range: $startDateFormatted 00:00:00 - $endDateFormatted 23:59:59 $nl
Total e-mails sent: $sendCountString $nl
Total e-mails received: $receiveCountString"
$smtp = new-object Net.Mail.SmtpClient($smtpServer)
$smtp.Send($emailFrom, $emailTo, $subject, $body)Could you elaborate a little bit more? I have not done a lot with powershell in exchange.
Would this be correct?
$mailbox= "[email protected]"
for each ($mailbox in $mailboxes)
#Get todays date twice
$startDate=Get-Date
$endDate=Get-Date
etc. -
FDM integration script for multiple locations
Hi,
I have a slight problem with FDM integration script (SQL integration).
From what I've understood and tested within one FDM-application (tablespace) I'm not able to have multiple integration scripts. This because the integration script needs to be named SQLIntegration.uss, otherwise there will be an error.
I have multiple locations within one FDM-application where I would like to use an integration script. Due to the above mentioned naming "bug", I need to include all my locations' integration information in one script. As imagined this is not a solution that easy to maintain or easy to read.
- Is there a workaround for the name-bug?
- Can I call a function within the main function? I tried without any success, but maybe you would have a solution.
Any input would be beneficialuser10757003 wrote:
Not sure what you mean when you say you rename the file and you get the error.
Is this a new integration script you have created and cut / pasted the existing integration script contents? If so, did you remember to change the SQLINTEGRATION = TRUE statement at the end of the script to the new integration script name? this might be the reason why you get the 'Import Successful' popup and the Import error dropdown.What I mean is that scripts are name xxx.uss abc.uss. This should be fairly clear.
Now I have the SQLIntegration.uss, if I change the name of the script to SQLIntegration1.uss or any name. The script will not work. And I receive one error and one success message as stated above.
Note: I'm not changing the content or anything else inside the script.
Maybe you are looking for
-
Error When I launch Safari on my MacBook Pro Safari 6.0 (v8536.25) has not been tested with the plugin SplashId.bundle (null) (v6.0.4(. As a precaution, it has not been loaded. Please contact the plugin developer for further information. I am getti
-
REP-1401: 'cf_1formula': Fatal PL/SQL error occurred.
Hi all, I am using the barcodes example which is on otn. I am getting the result on the development side which is my local set-up. (windows-2000) and i am using Report Builder 9.0.4.0.21. I am able to see the barcode. If i try the same thing on my de
-
I'm using HP Mini 210, Windows 7 Starter. The last time I used the built-in cam was 5 days ago. I used it to record a video. No update has been made ever since, but now that I wanna use it again, it won't start. It doesn't show any image when I open
-
hi all, i have master detailed view objects i have dropped the master view object as adf tree in my page how can i use only specified field to get its value i have made all fields available while creating tree i am using adf bc jdeveloper 11.1.1.2.0
-
Since upgrading my 3GS to iOS 4, my photos will not display in landscape mode. I've tried the screen lock but that doesn't help the problem. Landscape does seem to work in other apps. Any ideas on what to try next?