Email freezes & all keyboard and notification sounds have disappeared
My Email freezes on a regular basis and the iPad has to be powered off and back on to unfreeze. Since the last iOS upgrade I've lost all keyboard and notification sounds although I can still play music etc.
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.
Similar Messages
-
Notification sounds have disappeared
I have been doing some research into the discussion pages to see if anyone else has had the same problem, and it appears I am not alone. When using iChat, my notification sounds have disappeared - when someone comes on/offline, when I open iChat (I don't get that whhhooooopppp noise), when I have an incoming chat I don't get the ringing sound (particularly annoying for my UK based friends and me when I miss them!) etc.
I have done the following to try and rectify the problem, but to no avail.
Trashed the audio preference file. Checked and adjusted the Audio MIDI settings to 44100. Verified and repaired permissions. Opened Garageband and closed it again. All software is up to date....Still nothing - unless I restart in which case it works once or twice and then falls silent again.
Anyone got any other ideas?
And if anyone is interested in another problem, I have the recurring issue of the phantom 'submarine' in iChats as well - this only just started recently, but it's so loud and irritating that I have to cancel the chats and try and start again. Recently I've given up video calling (although it hasn't mattered cause I keep missing my friends due to my silent iChat alerts!)
Any help/ideas on either/both subjects would be much appreciated!Just to make sure, you've tried all these settings and still no sound?:
iChat>preferences>alerts>play sound box has been ticked?
In the same window have you moved the volume slide bar and still no sound?
Have you tried to highlight a buddy in your list and from the top menu:
contacts(buddies)>info>alerts>play sound>select an event and the sound you would like to go with it?
If these have been tried and it still does not work:
Quit all open applications, open Quicktime from the dock.
Hold the command(Apple key) and press "K".
You'll see the A/V control panel for Quicktime, volume slide bar to the right.
Now select the iChat icon in the dock and with iChat open, click on the Quicktime icon in the dock once more.
You will see the A/V control panel with the volume slide bar now on the left (mute).
Hold the command(Apple) key and press "K", (the A/V window disappears), keep holding the command key and press "K" again, the window appears again and now the volume should be to the right (max).
Check if the sound effects are working now in iChat.
For me this somehow works for audio issues, (or maybe I have audio issues because of the toggling).
Don't ask me why, it works when there is no sound in quicktime movies in safari, or when you have no sound at all. -
I have just finished the upgradation to an iOS 6.1.3 and have lost sound in Music and Videos. I am using an iPhone 4S. My iPhone doesn't produce sound when playing Youtube or local camera videos. However ringtones and notifications sound works fine.It is quite strange as well. Have you encountered this issue before?If yes then what's the solution?
I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns -
When I plug my iphone 4s into the usb in my car, text and notifications sounds are gone.
When I plug my iphone 4s into the usb in my car, text and notifications sounds are gone. The phone only vibrates, no sound. The ringer works fine, and the music plays through the stereo system just fine. When I try to turn up the volume, the ringer shows on the screen, but it will not increase in volume. When I unplug the usb, everything works fine. I have tried different cords and different cars, all with the same result. This only happens in the car, when hooked up to the usb in the house or to the computer, everything works fine. When plugged into the car, the sound disappears. Any ideas?
See either http://support.apple.com/kb/TS1538 (windows) or http://support.apple.com/kb/TS1591 (mac).
-
My keyboard clicks and ringer volume have disappeared. I have tried plugging in the head phones many times, blowing air in the headphone jack, credit card in the charger jack, everything on you tube basically! To no avail! Any suggestions?
Hi Bones777,
Thanks for visiting Apple Support Communities.
If you do not hear sound from your iPhone speakers, try these steps next:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If you still do not hear sound after completing the troubleshooting above, I recommend backing up your iPhone data and restoring the iOS software:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Best Regards,
Jeremy -
All The Notes and All my personalized Mailboxes and Smart mailboxes have disappeared
When I woke up my MacBook Pro and wanted to check email, all The Notes and All my personalized Mailboxes and Smart mailboxes have disappeared.
I only have the standard mailboxes like inbox, sent, trash, etc...
Anyone can help with this?
Thanks
Short background:
I have upgraded recently from Snow Leopard to Lion.
I have lost a lot of software (and had to re-purchase licences and re-install it) but then I have said to myself BE IT! great that I did not lose critical stuff.
I have also said that I will do the Time Machine back-up when everything is working fine....
Well, I think I was a bit too quick with my statement and too slow with the back-up...
MugurYou are not getting them from there, you just verifying if you have a back up with notes (you will have to check the date and try to remember if had those at that date and time.) Then you have two ways to go - the apple way and third party way.
1 Apple way - restore from back up (downside is you going to lose changes to your phone since the last back up)
be careful - not to overwrite last back up when you connect your phone, I would find and copy back up file just in case to external drive. You can find location of your actual back up file using that article
http://support.apple.com/kb/HT4946
if you expand where it says "where back ups are stored on the computer"
how to restore from itunes back up here
http://support.apple.com/kb/HT1766
2. not Apple way.- there are programs for windows that allow you to look inside of actual back up file.
Google is your friend for that one.
If you don't like my results just adjust search to your liking.
https://www.google.com/webhp?sourceid=chrome-instant&rlz=1C1_____enUS481US481&io n=1&ie=UTF-8#hl=en&safe=off&tbo=d&rlz=1C1_____enUS481US481&sclient=psy-ab&q=how% 20to%20look%20inside%20of%20iphone%20back%20up&oq=&gs_l=&pbx=1&fp=87ac1fa8918878 c8&ion=1&bav=on.2,or.r_gc.r_pw.r_qf.&bvm=bv.1357700187,d.aWM&biw=1280&bih=643 -
IMac OS X (10.5) Black screen,chimes when switched on,light on keyboard and mouse. Have tried few tips to restar it. Still black. What could it be?
Try to start up in Safe Mode. It uses a "one size fits all" display mode, runs one pass of Disk Utility "Repair Disk" as it starts up, then loads with minimal extensions and presents a login screen (even if you normally auto-login). It takes five minutes or more.
If you get a picture, use System Preferences > Displays ... to change your screen resolution at least once. -
having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest versionMay you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios -
WIN7: Mistakenly un-installed Adobe Application Manager and now all Adobe apps (CS3, CS5 and Elements 6) have disappeared from the programs list in the start up menu.
CS5 Bridge is still there so I can get into the photo editor to de-activate it and re-install.
However, all of CS3 has disappeared so I cannot get into it to de-activate.
Question 1: Will downloading and re-installing Adobe Application manager get CS3 automatically back?
Question 2: If not, what to do to get CS3 back things working properly again? Remember, I can't de-activate it.
Thanks and have a happy day!Don't worry about activation unless you are installing on a new and different machine. Simply reinstall in order. It should all work.
Then install any updates. Product updates
After that, let me know how it went and if there are any further questions.
Gene -
All the playlists I lovingly and painstakingly created have disappeared. I have Windows 7 and have decided NEVER EVER to get another 'update' of ITunes...grrr Help!
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
HT2729 all download and file copies have been paused. the disk you are attempting to use is full
this is the message im having trouble with.
all download and file copies have been paused. the disk you are attempting to use is full
what do i do now?
thanksPerhaps the destination you are trying to download to is full; that's what the message says, after all.
If you're trying to download directly to an iPod touch, then perhaps it is full up.
If you're trying to download to your computer, is there space on your hard drive? Alternatively, is the hard drive set to "read only" or are your account permissions set to deny you the option to save files? -
I have just purchased a Mac Book Pro. I would like to find the list of all updates and downloads that have occurred since purchase. Where can I find that info?
I know how to do the updates. What I dont know is what size each update that I have completed was. I am having a data usage disagreement with my Telco and want to prove to them that this computer did not download the amount of data they are claiming it did.
-
I had quite a few notes in the 'Notes' app. I suddenly find that all of them, except 3 have disappeared. What could be the reason and how can I get my notes back?
Not fully au fait with iCloud. I don't use it. But if you have done a backup to iCloud then this might help. This reply will refresh your post thereby giving others an opportunity to comment. Meanwhile, read up about iCloud in the User Guide. Here's the link to download it - http://support.apple.com/manuals/#ipad
-
Hi, In my view, all divide and conquer algorithms have Oefficiency doubt
Hi,
In my view, all divide and conquer algorithms have O(n log n) . But is there anyway to have a divide and conquer algorithm without the O(log n) factor?
Do reply..
Thanksricardo_reli
Welcome to the forum. Please don't post the same question more than once.
I'm locking this thread now. The discussion can continue at
[http://forums.sun.com/thread.jspa?threadID=5342725]
db
Maybe you are looking for
-
Error while invoking secure web service.
Hi, I am trying to access a secure web service through a simple BPEL process in SOA Suite 11g. When I test it through enterprise manager I am getting the following error. Since it's a secured websecure i set the WS policy(oracle/wss_username_token_cl
-
Hello, I created the Role, Page and added the VC model from VC. When deploying, I could see the portal application, but when assigning the Role created in VC to the user and testing with that user credentials, it gives an error "Page not available"??
-
Burn' iso on a usb key rather than a CD
is this possible in 10.5 ?
-
Upgrade to Iphoto 6 wiped out all albums
One of my clients upgraded to iphoto 6 and it erased all of his albums (the originals are still in the library, however all of his organized albums are gone). This also happened to his itunes when he upgraded. Is there something that can be done to r
-
2LIS_11_V_ITM: Adding field AUART
The extractor 2LIS_11_V_ITM does not contain the field AUART and this field can not be added via LBWE. The field is mentioned in MCVBAK but in table TMCEXCFS the state is 'F', indicating that filling is not allowed. I do not understand why a field is