Email from ABAP program

Hi !
I am populating the email body with some internal table values. I would like a line feed and carriage return in the email. How do I do it ?
Constants : c_lf(2) TYPE X value '0A'.
c_cr(2) TYPE X value '0D'.
SWC_CREATE_OBJECT MESSAGE 'MESSAGE' SPACE.
SWC_SET_ELEMENT CONTAINER 'DOCUMENTTITLE' 'Title'(020).
SWC_SET_ELEMENT CONTAINER 'DOCUMENTNAME' 'Email message'(020).
SWC_SET_ELEMENT CONTAINER 'DOCUMENTTYPE' 'RAW'.
SWC_SET_ELEMENT CONTAINER 'NO_DIALOG' 'X'.
CONCATENATE 'Dear' firstname INTO CONTENT.
APPEND CONTENT.
CONTENT = c_lf.
APPEND CONTENT.
CONTENT = c_cr.
APPEND CONTENT.
CONTENT 'This is the first line'.
APPEND CONTENT.
The above just appends the hex values of line feed and carriage return into the email body and doesn't actually create a line feed / carriage return.
Any ideas ?
Cheers,
Ashok.

If you are using SAP R/3 Enterprise, you might want to look at the class(SE24) CL_ABAP_CHAR_UTILITIES - the attributes section.
Regards,
Subramanian V.

Similar Messages

Send BW query results as HTML email from ABAP program

I have published a code sample for sending BW query results as HTML email from ABAP program. if you have any questions or clarification, please post them here.
the same can be accessed from this link.
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b7658119-0a01-0010-39a9-b600c816f370
Regards
Raja
Message was edited by: Durairaj Athavan Raja

OK forget about my earlier post.
do the following changes.
declare the following variables:
data: xtext type standard table of solix .
DATA: atta_sub TYPE sood-objdes .
after the call of FM SCMS_STRING_TO_FTEXT add the following code.
CALL FUNCTION 'SO_SOLITAB_TO_SOLIXTAB'
EXPORTING
    ip_solitab        = text
IMPORTING
   EP_SOLIXTAB       = xtext .
and after the following statement
document = cl_document_bcs=>create_document(
                          i_type    = 'HTM'
                          i_text    = text
                          i_length = conlengths
                          i_subject = subject ).
add the following code
CALL METHOD document->add_attachment
            EXPORTING
              i_attachment_type    = 'htm'
              i_attachment_subject = atta_sub
              i_att_content_hex    = xtext.
now you will have results both in the body as well as attachment. (this is for test you can remove one of them )
Regards
Raja

Sending emails from ABAP program

Hi,
I need to send error emails from ABAP program.
I have to pass error internal table as text (not as attachment) in the email.
Can anybody supply any sample code?
Thanks in advance.
Regards,
Arun Mohan

HI,
See if this code helps:
***Sending mail to the receipients
if not it_final[] is initial.
Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Sales Register Report - Set Top Box / Accessories'
'XLS'
'SSTB'
CHANGING GD_ERROR
GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
endif.
*& Form BUILD_XLS_DATA_TABLE
text
--> p1 text
<-- p2 text
FORM BUILD_XLS_DATA_TABLE .
data: wa_itab like it_final.
CONSTANTS:
CON_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
CON_CRET TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF.
CONCATENATE 'Business Place' 'Region Code' 'Region' 'Branch Code'
'Branch' 'Material Desc' 'Area off Code'
'Area Name' 'Zone code' 'Zone Name' 'Cust No' 'Cust Name'
'Bill Doc No' 'Bill Date' 'Base Val' 'Total Val' 'Quantity'
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_FINAL INTO WA_ITAB.
CONCATENATE WA_ITAB-BUSINESS_PLACE
WA_ITAB-KVGR1
WA_ITAB-REGION
WA_ITAB-VKBUR
WA_ITAB-SALES_OFF
WA_ITAB-ARKTX
WA_ITAB-vkgrp
WA_ITAB-sales_grp
WA_ITAB-bzirk
WA_ITAB-zone
WA_ITAB-kunnr
WA_ITAB-name
WA_ITAB-vbeln
WA_ITAB-fkdat
WA_ITAB-base_value
WA_ITAB-total_value
WA_ITAB-fkimg
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form POPULATE_EMAIL_MESSAGE_BODY
text
--> p1 text
<-- p2 text
FORM POPULATE_EMAIL_MESSAGE_BODY .
REFRESH IT_MESSAGE.
CONCATENATE SY-DATUM6(2) '/' SY-DATUM4(2) '/' SY-DATUM+0(4) INTO G_DATE.
IT_MESSAGE = 'Please find attached excel sheet.'.
APPEND IT_MESSAGE.
IT_MESSAGE = 'Sales Register Report - Set Top Box / Accessories'.
APPEND IT_MESSAGE.
Concatenate 'Report generated date' ':' G_Date '.' into IT_MESSAGE.
APPEND IT_MESSAGE.
clear it_message.
append it_message.
IT_MESSAGE = 'This is an autogenerated mail, please do not reply'.
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
T_PACKING_LIST-OBJ_NAME = 'stb'.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-DOC_TYPE = 'XLS'.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_DESCR = 'Sales_STB'.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-OBJ_NAME = 'stb'.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
LOOP AT IT_RECV.
T_RECEIVERS-RECEIVER = IT_RECV-EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-COPY = 'X'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM. "SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
text
--> p1 text
<-- p2 text
FORM INITIATE_MAIL_EXECUTE_PROGRAM .
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = ''
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
Regards
Subramanian

Sending EMAIL from ABAP Program Configuration+Code(Step by step)

Dear All,
Please anybody can provide me Step by Step document for sending Email from ABAP Program.
Thanks,
RP

Not an appropriate forum. Try ABAP forum.
Regards,
Jai Shankar

Email from ABAP program to outlook with attachment

Hi,
I need to send an email to outlook from my program with an attachment. I wrote my program without attchment feature and working fine. I really donot understand how to do attchment. Can anyone send me some piece of code.
I promise points will be rewarded for useful answers.
Thanks In Advance.
Rajesh.

Here is a sample program how to attach a sapscript output to your email.
REPORT ZRICH_0003.
DATA: ITCPO LIKE ITCPO,
      TAB_LINES LIKE SY-TABIX.
* Variables for EMAIL functionality
DATA: MAILDATA   LIKE SODOCCHGI1.
DATA: MAILPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: MAILHEAD   LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: MAILBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: MAILREC    LIKE SOMLREC90 OCCURS 0 WITH HEADER LINE.
DATA: SOLISTI1   LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
PERFORM SEND_FORM_VIA_EMAIL.
*       FORM SEND_FORM_VIA_EMAIL                                      *
FORM SEND_FORM_VIA_EMAIL.
CLEAR:    MAILDATA, MAILTXT, MAILBIN, MAILPACK, MAILHEAD, MAILREC.
REFRESH: MAILTXT, MAILBIN, MAILPACK, MAILHEAD, MAILREC.
* Creation of the document to be sent File Name
MAILDATA-OBJ_NAME = 'TEST'.
* Mail Subject
MAILDATA-OBJ_DESCR = 'Subject'.
* Mail Contents
MAILTXT-LINE = 'Here is your file'.
APPEND MAILTXT.
* Prepare Packing List
PERFORM PREPARE_PACKING_LIST.
* Set recipient - email address here!!!
MAILREC-RECEIVER = '[email protected]'.
MAILREC-REC_TYPE = 'U'.
APPEND MAILREC.
* Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = MAILDATA
            PUT_IN_OUTBOX              = ' '
       TABLES
            PACKING_LIST               = MAILPACK
            OBJECT_HEADER              = MAILHEAD
            CONTENTS_BIN               = MAILBIN
            CONTENTS_TXT               = MAILTXT
            RECEIVERS                  = MAILREC
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            OPERATION_NO_AUTHORIZATION = 4
            OTHERS                     = 99.
ENDFORM.
*      Form PREPARE_PACKING_LIST
FORM PREPARE_PACKING_LIST.
CLEAR:    MAILPACK, MAILBIN, MAILHEAD.
REFRESH: MAILPACK, MAILBIN, MAILHEAD.
DESCRIBE TABLE MAILTXT LINES TAB_LINES.
READ TABLE MAILTXT INDEX TAB_LINES.
MAILDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( MAILTXT ).
* Creation of the entry for the compressed document
CLEAR MAILPACK-TRANSF_BIN.
MAILPACK-HEAD_START = 1.
MAILPACK-HEAD_NUM = 0.
MAILPACK-BODY_START = 1.
MAILPACK-BODY_NUM = TAB_LINES.
MAILPACK-DOC_TYPE = 'RAW'.
APPEND MAILPACK.
* Creation of the document attachment
* This form gets the OTF code from the SAPscript form.
* If you already have your OTF code, I believe that you may
* be able to skip this form. just do the following code, looping thru
* your SOLISTI1 and updating MAILBIN.
PERFORM GET_OTF_CODE.
LOOP AT SOLISTI1.
    MOVE-CORRESPONDING SOLISTI1 TO MAILBIN.
    APPEND MAILBIN.
ENDLOOP.
DESCRIBE TABLE MAILBIN LINES TAB_LINES.
MAILHEAD = 'TEST.OTF'.
APPEND MAILHEAD.
** Creation of the entry for the compressed attachment
MAILPACK-TRANSF_BIN = 'X'.
MAILPACK-HEAD_START = 1.
MAILPACK-HEAD_NUM = 1.
MAILPACK-BODY_START = 1.
MAILPACK-BODY_NUM = TAB_LINES.
MAILPACK-DOC_TYPE = 'OTF'.
MAILPACK-OBJ_NAME = 'TEST'.
MAILPACK-OBJ_DESCR = 'Subject'.
MAILPACK-DOC_SIZE = TAB_LINES * 255.
APPEND MAILPACK.
ENDFORM.
*      Form GET_OTF_CODE
FORM GET_OTF_CODE.
DATA: BEGIN OF OTF OCCURS 0.
          INCLUDE STRUCTURE ITCOO .
DATA: END OF OTF.
DATA: ITCPO LIKE ITCPO.
DATA: ITCPP LIKE ITCPP.
CLEAR ITCPO.
ITCPO-TDGETOTF = 'X'.
* Start writing OTF code
CALL FUNCTION 'OPEN_FORM'
       EXPORTING
            FORM     = 'ZTEST_FORM'
            LANGUAGE = SY-LANGU
            OPTIONS = ITCPO
            DIALOG   = ' '
       EXCEPTIONS
            OTHERS   = 1.
CALL FUNCTION 'START_FORM'
       EXCEPTIONS
            ERROR_MESSAGE = 01
            OTHERS        = 02.
CALL FUNCTION 'WRITE_FORM'
       EXPORTING
            WINDOW        = 'MAIN'
       EXCEPTIONS
            ERROR_MESSAGE = 01
            OTHERS        = 02.
* Close up Form and get OTF code
CALL FUNCTION 'END_FORM'
       EXCEPTIONS
            ERROR_MESSAGE = 01
            OTHERS        = 02.
MOVE-CORRESPONDING ITCPO TO ITCPP.
CALL FUNCTION 'CLOSE_FORM'
       IMPORTING
            RESULT = ITCPP
       TABLES
            OTFDATA = OTF
       EXCEPTIONS
            OTHERS = 1.
* Move OTF code to structure SOLI form email
CLEAR SOLISTI1. REFRESH SOLISTI1.
LOOP AT OTF.
    SOLISTI1-LINE = OTF.
    APPEND SOLISTI1.
ENDLOOP.
ENDFORM.
Regards,
Rich Heilman

Html Email from abap program itab - html - email

hi experts..
i want to convert an itab into html and then with html format send an email , following is the code for that
report, the email is coming but not in the html format,
can any body help me in this regard...
thanks in advance
umer
<< Please only post the relevant portions of your code - and format it.>>
Edited by: Umer Malik on Jun 5, 2009 3:48 PM
Edited by: Umer Malik on Jun 5, 2009 4:03 PM
Edited by: Rob Burbank on Jun 5, 2009 10:11 AM

Hi,
Check this.
TABLES: KNA1.
DATA DECLARATION
DATA : IT_DATA_XML TYPE STANDARD TABLE OF KNA1 WITH HEADER LINE.
DATA : XML_RESULT TYPE STRING.
SELECT OPTIONS
selection-screen begin of block abc with frame title text-001.
selection-screen skip.
SELECT-OPTIONS: SO_KUNNR FOR KNA1-KUNNR.
selection-screen skip.
selection-screen end of block abc.
*START OF SELECTION
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM GET_INTO_XML_FORMAT.
FORM GET_DATA
FORM GET_DATA.
SELECT * FROM KNA1 INTO TABLE IT_DATA_XML
WHERE KUNNR IN SO_KUNNR.
IF SY-SUBRC <> 0.
    MESSAGE 'RECORDS NOT FOUND.' TYPE 'E'.
ENDIF.
ENDFORM.                    "GET_DATA
FORM GET_INTO_XML_FORMAT
FORM GET_INTO_XML_FORMAT.
call transformation id
source SOURCE = IT_DATA_XML[]
result xml XML_RESULT.
refresh IT_DATA_XML.
CALL TRANSFORMATION id
    SOURCE XML XML_RESULT
    RESULT SOURCE = IT_DATA_XML[].
write: 'this is test'.
ENDFORM.                    "GET_INTO_XML_FORMAT

To send external email from ABAP

How to send external email from ABAP Program and what are the settings to be done for the same ?

Please check..
Sending External email through SAP
What is the FM for sending the external email through SAP by attaching layout set to it?
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
How to send a report to an external mail-id?
Try this sample code :-
REPORT ZREPORT_TO_EMAIL NO STANDARD PAGE HEADING LINE-SIZE 200.
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
Receivers
receiver_list-recextnam = '[email protected]'. "-->
EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.

Sending an email to users from abap program

Hi experts ,
How to send an email to users from abap program ...
i need full coding please..so that i can copy and paste it in my program.
Thank you in advance.
Rajasekhar.P

Hi Venkat
check the below simple code to convert spool to HTML and email it
data: list type table of abaplist with header line.
data: htmllines type table of w3html with header line.
data: maildata   like sodocchgi1.
data: mailtxt    like solisti1 occurs 10 with header line.
data: mailrec    like somlrec90 occurs 0 with header line.
start-of-selection.
Produce a list
do 100 times.
    write:/ sy-index, at 30 sy-index, at 50 sy-index.
enddo.
Save the list
call function 'SAVE_LIST'
       tables
            listobject         = list
       exceptions
            list_index_invalid = 1
            others             = 2.
Convert the list
call function 'WWW_LIST_TO_HTML'
       tables
            html = htmllines.
Send mail
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
loop at htmllines.
    mailtxt = htmllines.
    append mailtxt.
endloop.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
       exporting
            document_data              = maildata
            document_type              = 'HTM'
            put_in_outbox              = 'X'
       tables
            object_header              = mailtxt
            object_content             = mailtxt
            receivers                  = mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

Problem sending email from abap to Outlook

We have a program that sends an email from ABAP to the SAP Inbox using FM SO_NEW_DOCUMENT_SEND_API1, the email arrives at the SAP Inbox and then it's redirected to Outlook. This works fine in 4.6C
We just upgraded to ECC 6, the same process does send the email to the SAP Inbox, but it doesn't go to Outlook. In the Recipient list TAB of the email, it appears the following attributes
Recipeint             email-address     via internet
Send attribs NONE
Status Return    Status is never returned. Status mail is only sent to inbox if error occur
Trans History : Status         Document Sent
                                            Wait for communications service
The strange thing is that if I'm in the SAP Inbox, and create and email from there, this email does go to the SAP Inbox and Outlook
Any ideas ?

Do you have COMMIT_WORK = ABAP_TRUE (or 'X') in your FM call. I had to make this change for ALL email sends when I migrated from 4.6x to next version.
In transaction SOST, can you send it from there? Is your service running constantly or periodically in development (it's usually not)...

XML files from ABAP programs

Hi everyone!
Is there a way in ABAP to output XML files? Pls. send code/ function module if any.
From ABAP programs, we are sure that we can output TEXT files, but how about XML files?
The significance of this question is related
Currently we are using XI to interface SAP and AMS, this question for ABAP to produce XML file arose, if for example, the XI server is down and we have to still send data from one system to another. IDocs can also produce XML files, pls confirm. Earlier however, we have preferred XI rather than IDocs to do this. Anyway, any idea regarding this scenario will be greatly appreciated.
Thanks and God bless!
Celeste

Hi,
Please check this sample codes from other thread.
1. itab --- > xml
xml ---> itab.
2. This program will do both.
(just copy paste in new program)
3.
REPORT abc.
*-------------- DATA
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
a(100) TYPE c,
END OF itab.
DATA: xml_out TYPE string .
DATA : BEGIN OF upl OCCURS 0,
f(255) TYPE c,
END OF upl.
DATA: xmlupl TYPE string .
******************************* FIRST PHASE
******************************* FIRST PHASE
******************************* FIRST PHASE
*------------------ Fetch Data
SELECT * FROM t001 INTO TABLE t001.
*------------------- XML
CALL TRANSFORMATION ('ID')
SOURCE tab = t001[]
RESULT XML xml_out.
CALL FUNCTION 'SCMS_STRING_TO_FTEXT'
EXPORTING
TEXT = xml_out
* IMPORTING
* LENGTH =
TABLES
FTEXT_TAB = itab.
*-------------- Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filetype = 'BIN'
filename = 'd:xx.xml'
TABLES
data_tab = itab.
******************************* SECOND PHASE
******************************* SECOND PHASE
******************************* SECOND PHASE
BREAK-POINT.
REFRESH t001.
CLEAR t001.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:XX.XML'
filetype = 'BIN'
TABLES
data_tab = upl.
LOOP AT upl.
CONCATENATE xmlupl upl-f INTO xmlupl.
ENDLOOP.
*------------------- XML
CALL TRANSFORMATION ('ID')
SOURCE XML xmlupl
RESULT tab = t001[]
BREAK-POINT.
Regards,
Ferry Lianto

Is it possible to call website from ABAP Program?

Hi Experts,
       Is it possible to call website from ABAP Program?
It is very Urgent Help me.
Regards,
Ashok.

Hi,
Check the following program:
REPORT ZURL NO STANDARD PAGE HEADING.
DATA: BEGIN OF URL_TABLE OCCURS 10,
L(25),
END OF URL_TABLE.
URL_TABLE-L = 'http://www.lycos.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.hotbot.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.sap.com'.APPEND URL_TABLE.
LOOP AT URL_TABLE.
SKIP. FORMAT INTENSIFIED OFF.
WRITE: / 'Single click on '.
FORMAT HOTSPOT ON.FORMAT INTENSIFIED ON.
WRITE: URL_TABLE. HIDE URL_TABLE.
FORMAT HOTSPOT OFF.FORMAT INTENSIFIED OFF.
WRITE: 'to go to', URL_TABLE.
ENDLOOP.
CLEAR URL_TABLE.
AT LINE-SELECTION.
IF NOT URL_TABLE IS INITIAL.
CALL FUNCTION 'WS_EXECUTE'
       EXPORTING
            program = 'C:\Program Files\Internet Explorer\IEXPLORE.EXE'
            commandline     = URL_TABLE
            INFORM         = ''
          EXCEPTIONS
            PROG_NOT_FOUND = 1.
IF SY-SUBRC <> 0.
     WRITE:/ 'Cannot find program to open Internet'.
ENDIF.
ENDIF.
Regards,
Bhaskar

Call SXPG _ CALL _ SYSTEM from ABAP program

Hi,
Someone may help me? I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
I created the command by SM49 , but I don't know how I can call it from ABAP program.
Thanks
Maria C

Hi Maria.
This is a possible code you can use:
DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
Can contain STDOUT, STDERR
commandname =
CALL FUNCTION SXPG_CALL_SYSTEM
IMPORTING
COMMANDNAME = commandname
PARAMETERS = parameters
EXPORTING
STATUS = status
TABLES
EXEC_PROTOCOL = log
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
The following are the comments of the parameters taken from:
http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
Parameters
IMPORTING Parameters
Parameter name
Use
COMMANDNAME
The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
PARAMETERS
Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
EXPORTING Parameters
Parameter name
Use
STATUS
Returns the final status of the execution of the external command:
· Value O: The external command was started and ran to end successfully.
· Value E: An error occurred; the external command was not run successfully.
Tables Parameters
Parameter name
Use
EXEC_PROTOCOL
Contains the STDOUT and STDERR output of the external command and any output from the target host system.
Exceptions
Exception name
Meaning
X_ERROR
Reserved for future use.
NO_PERMISSION
The AUTHORITY-CHECK of the users authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
COMMAND_NOT_FOUND
Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
PARAMETERS_TOO_LONG
The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
SECURITY_RISK
Either:
· The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
· The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
WRONG_CHECK_CALL_
INTERFACE
The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
TOO_MANY_PARAMETERS
The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
PARAMETER_EXPECTED
The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
PROGRAM_START_ERROR
An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
PROGRAM_TERMINATION_
ERROR
An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
ILLEGAL_COMMAND
The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
OTHERS
Catch any new exceptions added to this function module.
Hope this will be useful.
Sandro Lombardo

Call workflow from ABAP program

created a zbusiness object (ZPRODH)with
one key field product hierarchy,
one attribute level number and
one method display.
I tested that zobject and using this object created workflow to display product hierarchy ,it is displaying it. now I have to call it from one abap program.
In the abap program I am calling the funcion module, I
CALL FUNCTION 'SWW_WI_START_SIMPLE'
EXPORTING
TASK = TASK
IMPORTING
WI_ID = WI_ID
TABLES
AGENTS = AGENTS
WI_CONTAINER = WI_CONTAINER.
It is calling the workflow and subrc is 0, but not passing the value to the workflow. Because of that the method is not working, any idea?
Thanks in advance

ttpa,
Please check this thread:
Re: Workflow from abap program
Also check that your Fm do requires any explicit commit or not?
Hope it will help u
Cheers
Jai

Call to Java web service from abap program

HI,
I want to call to Java WS from abap program and i read some post how to do that in release of NW 6.4 but I want to know what is the simplest way to do that in release 7.0 .
Many Thanks,
Nina

Hi Uwe,
Thank you.
I have WSDL or URL how i can call to them ,in the example that you send i don't find the place that it called.
Do i have to create proxy for that ?
BR
Nina

Execute webdynpro from abap program and return to the caller program

Guys,
I have a question here.
I know there is a way to call an abap webdynpro application from normal abap program by either using a class method, or use a function module WDY_EXECUTE_IN_PLACE by providing
the webdynpro application or using CALL TRANSACTION statement.
But, is there anyways that we can call the webdynpro application from abap program by supplying data to the webdynpro and display to the user from the portal, and then
once the user do some manipulation on the data, can we transfer back the data to the caller abap program?

hey ,
you can pack any web-dynpro program in tranasaction code and run it from R/3 and not via portal :
search in " SAPTECHNICAL" how to do so - for some reason i cant post a link here
than you can use call transaction .
regards
ASA

Email from ABAP program

Similar Messages

Maybe you are looking for