Email handoff doesn't work if started from picture roll

Handoff from email works fine if I start in the email app on my iPhone, start to draft an email, insert pictures, and then switch to my mac pro; however, if I start in my camera roll and select a couple of pictures, then choose to email them---the auto generated email won't show up on my Mac for handoff.  Just an oddity that I noticed.  Not sure if others are having that issue as well. 

Click/hold and drag the iChat icon out of the dock, then trash the iChat alias on the desktop.
Now go to the Apps folder and drag iChat to the dock.

Similar Messages

  • Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone.  What can I do to stop this from happening?

    Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone.  What can I do to stop this from happening?
    I have tried deleting the account and it deletes all my contacts.  I have verizon and even using back up assistant, it says the contacts are there but they aren't.  The only way i can find a contact is if I start to type a name in and new text but once i sent the new text, the name disappears and it just shows the number.  Siri nor the address book don't recognize any contacts at all.

    I cant find any reciept in my email or in my husbands email.  I am going to attempt to call and speak to someone who can help me because this was not my fault except trying to be normal and update my phone!

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can se

    Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. When I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game. 

    Hello Vaidas Vaidas,
    It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
    Apple ID: Changing your password
    http://support.apple.com/kb/ht5624
    What is preventing you from changing your password? Any error messages or prompts?
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Mail server doesn't work after upgrading from SL to ML

    My Mail server doesn't work after upgrading from SL to ML
    Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
    the problem seems to be related with dovecot ... in my smtp log i get this:
    relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
    I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
    Any Ideas?
    Cheers
    Carlo
    This is my postconf -n info:
    server:Data admin$ postconf -n
    biff = no
    command_directory = /usr/sbin
    config_directory = /Library/Server/Mail/Config/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    data_directory = /Library/Server/Mail/Data/mta
    debug_peer_level = 2
    debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
    dovecot_destination_recipient_limit = 1
    enable_server_options = yes
    header_checks = pcre:/etc/postfix/custom_header_checks
    html_directory = /usr/share/doc/postfix/html
    imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
    inet_interfaces = all
    inet_protocols = ipv4
    mail_owner = _postfix
    mailbox_size_limit = 0
    mailbox_transport =
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 20971520
    mydestination = $myhostname, localhost.$mydomain, localhost
    mydomain = moremoremore.it
    mydomain_fallback = localhost
    myhostname = server.moremoremore.it
    mynetworks = 127.0.0.0/8,192.168.178.0/24
    newaliases_path = /usr/bin/newaliases
    queue_directory = /Library/Server/Mail/Data/spool
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost = mail.mclink.it
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = _postdrop
    smtp_sasl_auth_enable = no
    smtp_sasl_password_maps =
    smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
    smtpd_enforce_tls = no
    smtpd_helo_required = yes
    smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
    smtpd_pw_server_security_options = cram-md5,gssapi
    smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
    smtpd_sasl_auth_enable = yes
    smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
    smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
    smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
    smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
    smtpd_use_pw_server = yes
    smtpd_use_tls = yes
    tls_random_source = dev:/dev/urandom
    unknown_local_recipient_reject_code = 550
    virtual_alias_maps =
    server:Data admin$

    if this could help:
    mail:setStateVersion = 1
    mail:readWriteSettingsVersion = 1
    mail:connectionCount = 11
    mail:servicePortsRestrictionInfo = _empty_array
    mail:protocolsArray:_array_index:0:status = "ON"
    mail:protocolsArray:_array_index:0:kind = "INCOMING"
    mail:protocolsArray:_array_index:0:protocol = "IMAP"
    mail:protocolsArray:_array_index:0:state = "RUNNING"
    mail:protocolsArray:_array_index:0:error = ""
    mail:protocolsArray:_array_index:1:status = "ON"
    mail:protocolsArray:_array_index:1:kind = "INCOMING"
    mail:protocolsArray:_array_index:1:protocol = "POP3"
    mail:protocolsArray:_array_index:1:state = "RUNNING"
    mail:protocolsArray:_array_index:1:error = ""
    mail:protocolsArray:_array_index:2:status = "ON"
    mail:protocolsArray:_array_index:2:kind = "INCOMING"
    mail:protocolsArray:_array_index:2:protocol = "SMTP"
    mail:protocolsArray:_array_index:2:state = "RUNNING"
    mail:protocolsArray:_array_index:2:error = ""
    mail:protocolsArray:_array_index:3:status = "ON"
    mail:protocolsArray:_array_index:3:kind = "OUTGOING"
    mail:protocolsArray:_array_index:3:protocol = "SMTP"
    mail:protocolsArray:_array_index:3:state = "RUNNING"
    mail:protocolsArray:_array_index:3:error = ""
    mail:protocolsArray:_array_index:4:status = "OFF"
    mail:protocolsArray:_array_index:4:kind = "INCOMING"
    mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
    mail:protocolsArray:_array_index:4:state = "STOPPED"
    mail:protocolsArray:_array_index:4:error = ""
    mail:protocolsArray:_array_index:5:status = "OFF"
    mail:protocolsArray:_array_index:5:kind = "INCOMING"
    mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
    mail:protocolsArray:_array_index:5:state = "STOPPED"
    mail:protocolsArray:_array_index:5:error = ""
    mail:startedTime = "2013-01-21 21:18:32 +0000"
    mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:SMTP Log = "/var/log/mail.log"
    mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
    mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
    mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
    mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
    mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
    mail:servicePortsAreRestricted = "NO"
    mail:state = "RUNNING"
    mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

  • Email account doesn't work with ios7

    I'm an italian user.
    I have upgraded to IOS7.
    After upgrade some email accounts works fine and other email accounts doesn't work at all (Alice from telecom, Tiscali).
    Any suggestion ?

    The problem is deeper than that. It's not reader. Now the same form I was creating in LifeCycle Designer ES2 yesterday, with the actions working perfectly, no longer work. None of the actions are working.
    Could it be realted to me trying to set the default version compatibility to Adobe 7. It gave me warnings, so I set it back to 9.
    Any help would be appreciated.

  • HT201363 I forgot my security question and when I press send it by email it doesn't work please help me

    I forgot my security question and when I try to press send it by email it doesn't work I've tried so many times and I didn't get any email pleas help me fastest as possible , thank you

    It would go to a separate rescue email that is different than your Apple ID.
    If you do not have a rescue email address (different from alternate email address) set up, you forgot it or no longer have it, then you will need to contact iTunes Support online: http://apple.com/emea/support/itunes/contact.html (select Account Security as your help topic) or by phone: Apple Support Numbers

  • TS1702 After I have upgraded to the new iOS 6.1.2, the email software doesn't work and is not downloading.  While before it was working fine.

    After I have upgraded to the new iOS 6.1.2, the email software doesn't work and is not downloading.  While before it was working fine.
    How to fix this?

    There seems to be massive amounts of problems with every aspect of iOS 6. From what I understand all you can do is try and reset your device and pray that Apple bequeaths working software next time or allows users to revert to iOS 5 while they search for someone who knows what they are doing. Perhaps you will need to use an alternate email app until then? (Although, Gmail seems to be the only one that works properly)

  • I created an apple ID account to my Iphone, but the system doesn´t send the verification link to my email adress. I tried many times with the buton "send verification email" but doesn´t work.

    I created an apple ID account to my Iphone, but the system doesn´t send the verification link to my email adress. I tried many times with the buton "send verification email" but doesn´t work. My mailbox doesn´t receive any mail.
    My account work correctly.
    please I need help.
    Thank you.

    It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
    This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
    Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

  • HT4314 Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I

    Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.

    Contact iTunes
    Contact iTunes

  • IOS8 handoff doesn't work

    iPhone 5S / iPad Air, iOS8 handoff doesn't work. I can't see and continue to work with no Apps either on iPhone nor on iPad. All "handoff-options" are <on> on each device.
    Any ideas?
    regards
    Raphael

    Ok.  Here's the link to the user manual:
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Page 26 explains what to do.
    This link below, shows what you should see.
    Connect your iPhone, iPad, and iPod touch using Continuity
    It works for my iPad w/retina, and my 5s.

  • We installed  the Acrobat Reader 11.0.09  on Citrix enable Windows 2008 server  a month ago , it was working.  starting from this weeke we are receiveing error mesaage   AcroRD32.exe - application error  (Instruction at 0x...bad8  bad referenced memory at

    We installed  the Acrobat Reader 11.0.09  on Citrix enable Windows 2008 server  a month ago , it was working.  starting from this weeke we are receiveing error mesaage   AcroRD32.exe - application error  (Instruction at 0x...bad8  bad referenced memory at 0x....bad8 The memory could not be written  Click ok to terminate the program)
    Instruction at 0x...bad8  bad referenced memory at 0x....bad8
    The memory could not be written
    Click ok to terminate the program

    Hi SUBRAMANIAN,
    Are you still facing this issue? It seems to be conflict to me.
    Are you using any third party plugins with Acrobat? Try disabling and to use it again.
    Regards,
    Ajlan Huda.

  • My ipad front camera doesn't working,cannot take a picture this moment,how to fix this problem?

    My ipad front camera doesn't working,cannot take a picture this moment,how to fix this problem?

    Try closing the Camera app via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Mouse clicks, scrolling doesn't work in applications from start screen (let's call it "tile application")

    Hello!
    I need help.
    2 days ago the mouse worked fine. Yesterday I noticed that the mouse scroll does not work in the "Book Bazaar Reader". Now I found that the right mouse button and left mouse button does not work in some applications, but scrolling work in these applications.
    In mail application clicks work in some panels, scrolling doesn't work.
    In desktop mode, the mouse works perfectly.
    Please help!

    Hi
    Since at desktop mode everything fine, i suspected some application or 3rd party SW change your mouse setting
    Go to run, msconfig, run as administrator, within the System Configuration dialogue box find startup tab, find KHALMNPR (if you using logitec mouse) and uncheck it
    click ok and restart
    or try to do clean boot to eliminate 3rd party SW issue

  • Can you restore from an older iCloud back up (July 3rd), and if it doesn't work RE restore from a new iCloud (July 14th)?

    I upgraded my 4S to a 5 on July 3. I had updated my back up to iCloud that morning (but it had also updated the night before). It did NOT restore from back up ANY games (I play one all the time and had a year and a half's worth of work in it!!!) But, I assumed it didn't do that, because it DID pull my contacts, though it didn't pull my email or my texts or anything. On July 13th I had to swap the 5 out for a new 5 because the first one was glitching. When I restored from back up this time (the date on it was July 12th) it pulled EVERYTHING!! I would like to try to reload the one from the 3rd to see if it will work now, but I hate to loose everything again! Can I load the 3rd's back up and if it doesn't work, RE load the back up from now? And even if I could do that, HOW do I do it?

    This is my boilerplate respone for the "waiting apps" problem. Give these suggestions a try in order.
    1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
    2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Make sure that you do not have a stalled download in iTunes - if you have a download in there that did not finish, complete that one first.
    4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. Apps may also be able to be deleted in Settings>General>Usage>Storage if you cannot get the X to pop up on the icon.
    6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
    7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Maybe you are looking for

  • Win 7 professional 64 bit version. Help me as installation of iTunes is unsuccessful.

    The following error messages appeared: 1. Error R6034 2 Apple Mobile Device has not started, 3. Error 7 Finally, the softwere required to start again the iTunes 64 installation. By doing that there were no success, The operating system is Win 7 Profe

  • Error in mopz.

    HI SAP gurus,                      Am deployed in ECC 6.0 upgrade to EHP4 project. for that i initially configured my system in mopz and generated the stack file and procedd my upgradation. now am facing a issue. mismatch of the SP level of EA-HR com

  • Data Source creation with SQL Server 2005

    Hi, I would like to create datasource for sql server 2005 in Visual Administrator. Please provide the steps and required jar files for datasource creation. Thanks Bobby

  • Customize display of exception caught in DCErrorHandlerImpl

    Hi , I have referred a couple of links - http://ramannanda.blogspot.in/2011/11/error-handling-in-adf.html http://docs.oracle.com/cd/E16162_01/web.1112/e16182/validation_model.htm#sthref487 Information regarding overriding and customizing the message

  • Studio 11 via Forte 6.2 Comparison

    I have Mot_OMCR_R19_Children.cxx file. The file a quite large. Forte 6.2 compiler takes about 9 minutes to compile it, while Studio 11 compiler is not able to compile this file. After a long work, it builds totally corrupted object file without any a