Email help still needed please

In my set up wizard, for email, I have only 2 options:
1. i want to use a work email account with a Blackberry Enterprise Server
2. I want to skip email set up.
How do i therefore access email setup?
I have a Pearl 8120.
Thanks for help

Welcme to the Frums!
Do you have BIS or BES?
Nurse-Berry
Follow NurseBerry08 on Twitter

Similar Messages

Self Assigned IP - Fixed, but help still needed, please

I'll add a bit of a back story first which I hope will help people understand my issue, but also hopefully lead people with a self-assigned IP issue to a fix (link is within the post)
I’m on on an iMac 20″ Mid 2007. I recently updated to OSX Lion after having wifi connection issues in Leopard. I used to randomly get kicked off my wifi and given a self assigned IP. With Leopard, the issue was fixed by applying a manual IP, router address etc and restarting. The issue would return months later, but I got over it after a few tantrums.
Then as soon as I updated to Snow Leopard, I instantly had no internet access and I could only upgrade to Lion if I downloaded system updates. So after a few hours of searching, I toggled my internet sharing ‘on & off’ and that was enough for that fix.
But then I upgraded to Lion and again, no internet. And nothing worked for me at all, every fix on the internet I tried failed. If my airport ever managed to connect to my router I would get a self assigned IP. Or it would say it was connected but there was no internet. So I hunted for hours and eventually found this:
Now, here is a fix for anyone who is having the same issue. I hope it works for you!
http://www.davidpierron.com/index.php/archives/2009/04/13/289/
This did work for me. The fix is to flush your ipfw through terminal, and it worked for me instantly.
However, I now have another issue that I really hope people can help me with. It's not as annoying as the above, but my god it's still very annoying!
Here are some bullets to show the tedious routine I have to go through in order to connect to the internet via my airport.
• I turn on my mac and my it tries to connect to my router automatically. But after a minute of trying, it says it can’t connect.
• I select my router manually from the list and have to enter my password manually, even though it is already saved in my Keychain.
• It then connects and says, ‘Connected but no internet’, so I leave it for two minutes and throw things around the room.
• After those 2 minutes it connects to the internet. But no, I can’t browse the web as the browser says 'DNS look up failure'.
• So I open terminal, enter 'sudo ipfw flush' to flush my ipfw and BINGO, I’m online 5 minutes after logging on to my machine.
The router I am using was only issued to me 8 months ago by my new ISP here in the UK, it connects via WEP and has always been stable for every other device I have connected to it. But I am going to ring up my ISP and see if there is a new router I can get.
If anyone - ESPECIALLY APPLE who seem to be shying away from admitting there has ever been an airport wifi issue - has any information to advise me, then please let me know.
Also if you are having a Self Assigned IP address issue and that fix above works, give the man some credit on his blog, and if you know him, give him a kiss from me!
Thanks

Update:
I spoke to my ISP to see if they had any newer routers and if they did WPA now.
I have a new router on its way and they have updated my router to do WPA!
The result?
I now connect to my router automatically after a restart. No issue there.
However,
It still can't find the internet when it first connects.
I still have to wait 2 minutes for it to find the net.
I still have DNS issues once connected
I still have to flush ipfw before it works correctly.

Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???

Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???

Problem solved... just saw the answer in another thread... https://discussions.apple.com/message/13110222#13110222

Help still needed

I still need help to get this script working.
<?
PHP Guestbook 1.1
Written by Tony Awtrey
Anthony Awtrey Consulting
See http://www.awtrey.com/support/dbeweb/ for more information
1.1.ora - Mar. 29, 2000
- Version for Oracle by Kari Pannila
kartsa@_NO_SPAM_ougf.fi
1.1 - Oct. 20, 1999 - changed the SQL statement that reads data
back out of the database to reverse the order putting the
newest entries at the top and limiting the total displayed
by default to 20. Added the ability to get the complete list
by appending the URL with '?complete=1'. Added the code and
additional query to count and list the total number of entries
and included a link to the complete list.
1.0 - Initial release
This is the SQL statement to create the database required for
this application.
CREATE TABLE GUESTS (
GUEST_ID NUMBER (4) NOT NULL,
GUEST_NAME VARCHAR2 (50),
GUEST_EMAIL VARCHAR2 (50),
GUEST_TIME DATE,
GUEST_MESSAGE VARCHAR2 (2000),
PRIMARY KEY ( GUEST_ID )
CREATE SEQUENCE GUEST_ID_SEQ
START WITH 0
INCREMENT BY 1
MINVALUE 0
NOCACHE
NOCYCLE ;
// This checks to see if we need to add another guestbook entry.
if (($REQUEST_METHOD=='POST')) {
// This loop removed "dangerous" characters from the posted data
// and puts backslashes in front of characters that might cause
// problems in the database.
for(reset($HTTP_POST_VARS);
$key=key($HTTP_POST_VARS);
next($HTTP_POST_VARS)) {
$this = addslashes($HTTP_POST_VARS[$key]);
$this = strtr($this, ">", " ");
$this = strtr($this, "<", " ");
$this = strtr($this, "|", " ");
$$key = $this;
// This will catch if someone is trying to submit a blank
// or incomplete form.
if ($name && $email && $message ) {
// This is the meat of the query that updates the guests table
$query = "INSERT INTO guests ";
$query .= "(guest_id, guest_name, ";
$query .= "guest_email, guest_time, guest_message) ";
$query .=
"values(guest_id_seq.nextval,'$name','$email',SYSDATE,'$message')";
// This is where we connect first time to the database
$c1 = ocilogon("chukws","ikechi","orcl");
$stmt = ociparse($c1,$query);
OCIexecute($stmt,OCI_DEFAULT);
OCIFreeStatement($stmt);
OCICommit;
} else {
// If they didn't include all the required fields set a variable
// and keep going.
$notall = 1;
?>

<HTML>
<HEAD>
<TITLE>Add a Message</TITLE>
</HEAD>
<BODY BGCOLOR="white">
<H1>Add A Message</H1>

<? if ($notall == 1) { ?>
<P><FONT COLOR="red">Please answer all fields</FONT></P>
<? } ?>

<FORM METHOD="post" ACTION="koe.php">
<PRE>
Your Name: <INPUT
TYPE="text"
NAME="name"
SIZE="20"
MAXLENGTH="50"
VALUE="<? echo $name; ?>">
Your Email: <INPUT
TYPE="text"
NAME="email"
SIZE="20"
MAXLENGTH="50"
VALUE="<? echo $email; ?>">
Enter Message:
<TEXTAREA NAME="message" COLS="40" ROWS="8" WRAP="Virtual">
<? echo $message; ?>
</TEXTAREA>
<INPUT TYPE="submit" VALUE="Add">
</PRE>
</FORM>
<HR>
<?
// This is where we count the number of entries.
$c1 = OCIlogon("chukws","ikechi","orcl");
$query = "SELECT COUNT(*) FROM guests";
$stmt = OCIparse($c1,$query);
OCIexecute($stmt);
OCIFetch($stmt,OCI_DEFAULT);
$numguest = OCIResult($stmt,1) ;
?>

<P>
<? echo $numguest[0]; ?> people have
left me a message.
</P>
<?
// This is where we decide to get all the entries or just the last 20.
// This variable is set by just adding a '?complete=1' after the URL.
$c1 = OCIlogon("chukws","ikechi","orcl");
if ($complete == 1) {
$query = "SELECT guest_name,guest_email,to_char(guest_time,'DD.MM.YYYY
HH24:MI:SS'),guest_message FROM guests ORDER BY guest_time DESC";
} else {
echo "Here are the first 20:<BR><br>\n";
$query = "SELECT guest_name,guest_email,to_char(guest_time,'DD.MM.YYYY
HH24:MI:SS'),guest_message FROM guests WHERE ROWNUM<21 ORDER BY
guest_time DESC";
$stmt = OCIparse($c1,$query);
OCIexecute($stmt,OCI_DEFAULT);
// This will loop as long as there are records waiting to be processed.
// Notice the plain HTML inside the while loop structure. PHP is
flexable
// enough to allow you to break into and out of the "code" at any point.
// ------------------------ while start
while (OCIFetchInto($stmt, &$guest)) {
?>
<TABLE BORDER="1" WIDTH="700">
<TR><TD>
Name: <? echo $guest[0]; ?>
</TD><TD>
Email: ">
<? echo $guest[1]; ?></A>
</TD><TD>
Time: <? echo $guest[2]; ?>
</TD></TR>
<TR><TD COLSPAN="3">
<? echo $guest[3]; ?>
</TD></TR>
</TABLE>
<BR>
<?} // end while ?>
</BODY>
</HTML>
Am getting the following error,
Parse error: parse error, unexpected T_WHILE in d:\application\product\10.1.0\db_2\apache\apache\htdocs\koe.php on line 182
Can CJJ and others please help. Thanks

Replace your line <?} // end while ?> with
<?} // end while
?>
Regards,
Torsten

Ant, eclipse help is needed please!!

Hi all,
I have a quick question in regard of ant and eclipse. If any of you know how to resolve this problem, please let me know . ok so the problem is the following.
Is there a way to use Apache ANT to compile and execute a particular file in eclipse without specifying the class name? I can do that in cygwin using VIM with the command %:t:r However, I haven't found the solution to do so in eclipse. Any idea or tip or solution is appreciated very much.
i.e. I can do this in cygwin. ant -target=%:t:r run this will automatically pick up the java file that I am currently working on and run it without telling ant which class I want to run. SO I would like to do the same in eclipse.
Take care and God bless!

Originally posted by: gregg.newatlanta.com
Ahhh, commons-net.jar!! That was the ticket. Thanks for your patience.
I had jakarta-oro-2.0.8.jar (which seems to work fine) but not
commons-net.jar !!
Thanks again!
Gregg
> The JARs you are seeing are the Ant JARs that make use of the library
> dependancies.
>
> You will need the JARs as outlined in
> http://ant.apache.org/manual/install.html#librarydependencie s.
>
> You will need the jakarta-oro-2.0.7.jar from http://jakarta.apache.org/oro/
> and the commons.net JAR from
> http://jakarta.apache.org/commons/net/index.html
>
> HTH
> Darins
>
> "Gregg Orangio" <[email protected]> wrote in message
> news:cnd180$5r7$[email protected]..
>
>>Thanks for the reply. However, it appears to me that Eclipse 3.0 does
>>ship with these library dependencies. The Ant Home Entries in the
>>runtime classpath shows the following libraries:
>>
>>.../plugins/org.apache.ant_1.6.1/ant-commons-net.jar
>>.../plugins/org.apache.ant_1.6.1/ant-jakarta-oro.jar
>>
>>These Jar files do indeed exist on the Eclipse installation. Are these
>>not the correct versions to allow the "telnet" task to be recognized?
>>
>>even though it appears to me that something else is wrong, I went ahead
>>and installed newly downloaded versions of ant-commons-net.jar and
>>jakarta-oro-2.0.8.jar from the Ant website. Adding these to either the
>>Ant Home Entries or the Global Entries does not correct the problem.
>>
>>Please help.
>>
>>
>>
>>Darin Swanson wrote:
>>
>>>The telnet task (as an optional task) has library dependencies that do
>
> not
>
>>>ship with Ant.
>>>
>>>See http://ant.apache.org/manual/install.html#librarydependencie s
>>>
>>>For telnet you need commons-net.jar and jakarta-oro 2.0.1.jar
>>>
>>>Likely your best solution is to add these JARs to the global Ant runtime
>>>classpath via the Ant preferences.
>>>
>>>HTH
>>>Darins
>>>
>>
>
>

TS1717 Since upgrading my ipad to os7 I can no longer get my ipad to load up my music from iTunes. Same with my ipod. I have an iMac OS 10.5.8 Help desperately needed please

Can anyone help please.? Since upgrading my Ipad to OS 7 I can longer access my music on iTunes. iTunes says upgrade to version 11.1 but my IMac will not allow this. My Ipod won't upload either. Help!

You need to buy a Mac OS X 10.6 DVD, install it, and run the 10.6.8 combo updater. Mac OS X 10.6 requires a Mac with an Intel CPU and at least 1GB of RAM.
(94902)

Immediate HELP IS NEEDED PLEASE!!!!!!

Dear Mr. Pedram Afshar and the Best Buy associates,
I have no choice but to write to you about my horrible expereince.
I have purchased 2 laptop from Best Buy.com via ebay site from BestBuy account.
The laptop fails to meet the standard since they always crashes and we need to return these 2 laptops ASAP.
We got the notice and approval from BestBuy that we can return the laptop via BestBuy store or mail it back by requesting a RMA pre-postage paid RMA Label.
I have been to the Best Buy Store and was refused to return these laptops.
I have called customer services and spoke with even the supervisor and was assured that the lable would be emailed it to me so I can return the machine --- that was 4 days ago.
I have emailed in Ebay to Bestbuy over 30 times and was promised the RMA labels to be emailed it to me, and as of today, I have gotten no labels.
I have then called once again yesterday and the customer service promised that it will be emailed it to me, and the lables are not in my email.
As the return period is approaching in a few days, There is no way I can return these laptops without the prepostage RMA labels which were promised to me time after time after time.
Would you please kindly look into the issues for me please?
The RMA for the pink laptop, which was for my daughter's birthday gift, is: {removed per forum guidelines}
The RMA for the blue laptop, which was for my son's birthday gift, is: {removed per forum guidelines}
I have BestBuy in writing to return these laptop, postage paid by BestBuy... but as of this point, I am not getting any of these labels to my email address...
Please kindly send them to me ASAP so I can return these laptops accordingly --- with time extension since the delay is caused by BESTBUY.
Thanks.
Eric

Hello Eric,
We recognize that there are always times when a device doesn’t meet a customer’s level of expectations, and its one reason why we have our Return and Exchange Promise. As this typically applies to even our EBay store page, I’m sorry to hear of the difficulties you’ve encountered while attempting to return your laptops, especially as it sounds like you’ve asked us for assistance multiple times without success.
Upon review of your orders using the email address you supplied when registering for the forum, it seems your computers’ Return and Exchange Promise period expired prior to you reaching out to us for a return shipping label. This could explain why neither our customer service agents nor our managers could authorize a return for your computer. Having said this, I’ve sent you a private message so we may discuss this in detail. You may view it by logging into the forum and clicking on the envelope icon in the upper right-hand corner of the page.
Thank you for posting,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

Help VERY needed, please!

Hi everyone,
My Mother's account has been taken over. She received an e-mail saying that her e-mail was changed, there was a link to report the abuse, but to do it you need to sign in - we can't, since that person changed the password most likely.
I can't contact ANY service, there is no live chat for me, no phone to call.
Can someone please help?
Her account is (removed for security) . the only correct e-mail is the one registered, it was never changed by us.
And this scumbag who took her account is now online! Please help us to get the account back
Solved!
Go to Solution.

Just open the link below to report your hacked/stolen account. Select Security and Privacy as Help Topic and Identity Theft/Account Takeover as the Related Problem. Then Click the Continue Support Request button near at the bottom of the page.
https://support.skype.com/en/support_request?needsLogin=false&topic=****************241&problem=****...
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

Installation help still needed Bundle 13

I have spent the better part of 2 weeks downloading & getting nowhere. I've spent 10/21, 10/22 & 10/27 trying to get Chat help to no avail. I have at least 1 case number # 0186024139 but no one to give it to. 10/19 I first did the download with Akamai, it took hours, then "Installer failed to initialize. Download support adviser”. When I click & go to the page it said the support adviser is no longer available! 10/20/14 I did as I was told & went to the download trial http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en&promoid=DJDV B, left the computer on all night downloading the Elements bundle, using the older installer, only to discover once again the "Installer failed message" and I already know that the support adviser is no longer available!
10/28 - 11/1 - I tried: “Be sure you are removing any bits of the failed installations, then try downloading from here: Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools It's an adobe-sanctioned site, but you must follow the Very Important Instructions, even when they don't seem right.” I removed everything I could find, printed out the instructions, page, turned off the security program, downloaded, I had such hopes, everything seemed fine,.then tried to install only to get then "Installer failed to initialize. Download support adviser”, again. When I click & go to the page it said the support adviser is no longer available! So what do I do NOW???? It’s been 11 days, please send help! I'm ready to give up!!!
Thank you for your time!

Hi,
Sorry for the inconvenience. Please upgrade the Adobe Application Manager on your machine
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Install the above mentioned exe on your machine and then try to install E13.
Thanks,
Shikha

Virus on mac pro...help/advice needed please.

Hi all,
I've just run Clamxav scan on my mac pro & it's showing an infected file in my USER directory, named    .rserv    & the infection name is   OSX.Flashback-8
Tried to delete this file in Clamxav & it says its moved it to trash, but when i look in trash its empty! Then, when I rerun the scan it again says the file is still there in my users directory. However I can't find this file using Finder. Clamxav says it's located at: users/my name/.serv
Can someone please tell me 1 - what is this file?   & 2 - How the **** do i get rid of it?
btw, the 1st time i ran the scan it showed 2 other suspicious files that I sent to trash & then emptied the trash... one was a file called download.dmg (with the infection name Adware.OSX   which was in my downloads folder) & the 2nd file name was called Tube2FileSetup.exe (infection name Trojan.Agent-290842   again this was in my download folder). These no longer appear to be on my system.
Thanks in advance.
Mac Pro Nehalem quad 2.66GHz, 6GB RAM, OS 10.6.3

http://www.bing.com/search?q=Flashback+OS+X
your mac isn't running 10.6.8 and therefore wasn't updated with Apple's latest security patches. And I guess you missed the "memo" and alerts months ago.
https://support.apple.com/kb/HT5244
http://reviews.cnet.com/8301-13727_7-57403430-263/detecting-and-removing-the-fla shback-malware-in-os-x/

Video help STILL needed ¬_¬

I have the latest software. I have updated my Ipod and restored and all that kerfuffle and STILL my videos show up on my library but NOT on my ipod. Would some one like to help me please

Connect your ipod and go to edit-->preferences Hit
the iPod tab. Then hit the videos tab. What option is
checked?
btabz
when i do that for mine, all the options are shaded out, and it's on don't update video...is there a way that i can change it? i've tried clicking the other 2 options, but it won't let me change it
Windows 2000

File IO - help still needed

Im sorry, I know the forum abhors cross-posts...but i think
everyone has forgotten me...
please see...
http://forum.java.sun.com/thread.jsp?forum=54&thread=347108&start=30&range=30&hilite=false&q=
i am getting a numberformatExceptioin on 0002 (2nd record)
I know that the first 2 bytes contain something that shouldnt be there
PLEASE...
can you take a look,
(or have i stumbled upon a question no one knows the answer too?)

Displaying everything returned by the StringTokenizer? That should tell you what kind of trash it's returning when you are expecting a number. You're not returning the delimiter are you? Guessing without seeing it that you need to trim whitespace from around your number before parsing it to an Integer?

JSlider help still needed-mouse event

Hi, I recently posted about help with the JSlider:
http://forum.java.sun.com/thread.jspa?threadID=604119&tstart=45
I am extending the JSlider and want to be able to move to a certain value by clicking on it. The methods people have posted before all involve calculating based on where the user clicks and slider min,max, and height, and are not very accurate with my slider (once you get to the middle, the clicking is off by one value). I need a way to do this more accurately. Is there anyone who could help me? I have also heard there would be a way to rebuild the JSlider completely myself, and that I could then configure it how I need to. While this would be a hassle, it may be my only option, so any help with that would be appreciated. Thanks!

I just had another look at this, and if you use the trackwidth instead of the sliderwidth,
and factor in the difference between their starting points, it works perfectly.

Help is needed PLEASE

can u please to tell me how to send a jar file i developed using JABWT to my nokia 6600. i have a usb bluetooth dongle in my PC
thanks
saleh

You need to install Nokia PC Suite, it has an Application Installer software .. please check if 6600 is supported by the PC Suite before downloading.

Help Still needed, before I BIN FX5200

Can anyone recommend the best drivers for WIN98/fx5200 128 graphics card. My current drivers downloaded form Nvidia(44.03_win9x) only seem to allow certain features to work.
Also since I installed the card my system has started to freeze occasionally. This also happend when I was using win xp pro and the correct MSI setup cd.
System Spec:
Win98,
P3 500MHz
PC100 Systemboard/slot 1/ Socket 370
256mb sdram
Unknown PSU.
Thanks.
Tom.

Thank`s for the help Guys, this is a list of IRQs:
0   System timer
1   Standard 101/102-Key or Microsoft Natural Keyboard
2   Programmable interrupt controller
3   Communications Port (COM2)
4   Communications Port (COM1)
5   CMI8738/C3DX PCI Audio Legacy Device
6   Standard Floppy Disk Controller
7   EPSON Printer Port (LPT1)
8   System CMOS/real time clock
9   ALi PCI to USB Open Host Controller
9   IRQ Holder for PCI Steering
9   IRQ Holder for PCI Steering
10   NVIDIA GeForce FX 5200
10   IRQ Holder for PCI Steering
11   CMI8738/C3DX PCI Audio Device
11   IRQ Holder for PCI Steering
12   PS/2 Compatible Mouse Port
13   Numeric data processor
14   Primary IDE controller (dual fifo)
14   ALi M5229 PCI Bus Master IDE Controller
15   Secondary IDE controller (dual fifo)
15   ALi M5229 PCI Bus Master IDE Controller
Even a newbie like me can see there are loads of conflicts, but that`s as far as my limited knowledge takes me. The entry "IRQ Holder for PCI Steering" has caused conflicts since I got the system, I don`t even know what it is or how to get rid!
My Os is win98. My motherboard will only upgrade to 600MHz.
I could stick some more ram in if it will help, I have just spent over £140 on the Graphics card and WinXP pro, I would prefer not to shell out anymore.
PSU= Cortek-LC200,120v/6a,240v/3.5a.
Thank`s.
Tom.

Email help still needed please

Similar Messages

Maybe you are looking for