Email I was reading disappeared when I scrolled down. I had just updated ios 8
iphone 5c. I recently updated the ios 8. My touch may be slow or hard because of age. The email was not in trash.
After I got that message, the book disappeared from my iPad again. So I repeated the procedures a few times.
The book is still on my iPhone and my Mac's iBook apps.
Sometimes it would show up on the list of books for my iPad on iTunes. Sometimes iTunes would switch from all books to selected books.
Right now I see something I didn't see before. Some books show up greyed out with circles next to them.. But the book I'm having problems with is not there. Then I went back to the other part of iTunes where I select which books to sync to my iPad. It has "All books" selected. I checked "Selected books" in order to scroll down and see the book I want (Miles Errant). It is unchecked again. I wish I didn't have so much difficulty trying to include screen shots in this forum, we will see if those come through.
So I check that book again, synchronize again, look again, synchronize all again, etc. I don't expect anything will be different.
Done. I synchronized with that selected book sorted. Checked, it wasn't there. Went back to iTunes, and selected "All books", with "Books" scrolled down far enough for me to see this book. Miles Errant got unchecked.
Similar Messages
-
My timeline table disappears when i scroll down to the bottom
Hi, i have put my images on after effects and everything was going well like normal, until i uploaded my final 12-20 images (im using after effects for my final 3 minute animation for uni), when i tried to scroll down to rezize these images and to make them 2f long the timeline table disappears everytime, also i managed to see that the frames with the problem are not the normal purple colour but are a blackish grey colour... ive tried deleting the frames and re uploading them but the same problem occured. I saved my work closed down my computer and re-opened it and the problem was still there. i also tried pasting the frames into a new composition but again... same problem. Is there a way to solve this problem as this animation is due in tomoz and i need to start adding sounds on audition and premiere but the animation needs to be finished so i can sync the sounds at the correct places
Please reply
Katie xIn addition to Todd's curiousity, I'm curious about something else: is this a SEQUENCE of images, such as stop-frame animation?
If the original file names have been retained, they're probably in the order in which they were taken, and you can import the lot of them as an image sequence. To get the on-2 look you seek, you can use the resulting clip's interpret footage settings. Select the target frame rate you want, and multiply that number by two. You're all set. -
Safari-Is there any way to stop the tab bar from disappearing when you scroll down?
It's really annoying. I know tapping it makes it come back, but still.
You will find that this is application dependent. Most Apple applications such as Safari and Mail will use the "sheet" type of dialog boxes that you are referring. There is no way for the user to change that behavior. Other, non-Apple, applications like Firefox use a "modal" dialog box for printing etc. The modal boxes can be moved around so you can see the page behind.
-
Bug in iphoto, when i scrolled down the photos went disappear.
the photos when disappear when i scroll down, some of them are appearing while some are not. there's means to have a bug. what should i do?
nercv:
It's not a but but probably a problem with ownership and permissions on the image files. Try the following: download and run BatChmod on the iPhoto Library folder with the settings shown here, substituting your account name for mine. You can either type in the path to the folder or just drag the folder into that field. -
To retain the title bar as in the page when we scroll down the report.
Hi,
I want to retain the Report name in the page when i scroll down to access the report columns. i don't want the report name to disappear when we scroll down the report.
Is that possible??
if yes...how??
Thanks.Hi,
Try to configure Freeze Panes in OBIEE11g it will resovle your issue (obiee11g version obiee11.1.1.6.0 and above)
http://oraclebisolutions.blogspot.com/2012/12/freeze-column-headers-in-obiee-11g111160.html
http://ebs2obiee.wordpress.com/2012/05/08/freeze-panes-in-obiee11g-working-solution/
Thanks
Deva -
I just installed the new mountain lion software on my iMac. I was currently running Snow Leopard. My problem is with my mouse. Now when I scroll down the page it moves in the opposite direction. In system preferences I tried checking and unchecking Natural for scroll feature. Movement from side to side works fine. Has anyone experienced this problem?
I think this new scrolling behaviour was introduced with Lion. You do get used to it pretty quickly (well I did). Are you sure that deselecting Natural Scrolling in Mouse Prefs doesn't re-instate the previous behaviour, it does here.
-
My iCloud email program is blitzing out - when I scroll through my email, it scrolls itself and I cannot stop it!! Help!! I'm using a windows computer (temporarily,ugh)
Please help.
Thanks,
PatIf this is happening when using Chrome to view email on icloud.com you might want to take a look at this discussion: https://discussions.apple.com/thread/4594146?tstart=0.
-
How to make a scroll animation constantly fixed after scrolling? I want the animation to Start when I scroll down, but I don't want the animated thing to disappear when I scroll up again.
I know how to start the animation by scrolling down, but I simply want it to stay there after it. Could you help me please, guys?Hi Tom,
There is no native feature in Muse to achieve this.
Regards,
Aish -
Just got a notification that a new email acct was accessing FaceTime when we were not. Thoughts?
We were trying to download Pinterest App on a phone, IOS was outdated so after entering Apple ID we were unable. A couple minutes later, got a notification that a new email address was accessing FaceTime when we were not.
Change the password for your Apple ID/iCloud ID.
Did the message say what email address was used?
Contact iTunes
Apple - Support - iTunes - Contact Us -
Hello, when I scroll down in one of my pages the contact below doesn't appears.
Does anyone know how to fix this. here is the link to the page: http://jorgequero.com/patio2/personalized-gifts.html
This was happening in all the pages when I was previewing the site on my computer then when I uploaded it is happening just in one pages.
Thanks!When I scroll down the las image and the footer content is not visible, then when I scroll up the header content and menu are not visible, at the beginning they are but not when I come back.
I'm attaching some pictures.
This is how should it looks:
This is how it look when I scroll down:
Then when I scroll back to top, the header and menu disappear.
Thanks a lot for your help. -
When I scroll down in facebook my screen turns black.
When I scroll down on facebook my screen turns black for a few seconds. In the past, it used to do it only on tumblr, but it hasn't happened there in quite a while.
At that time, I actually thought it was do to my computers memory (I tend to leave my computer on a lot and I also tend to have many active windows and tabs) but now, it sometimes does it within only a few minutes of restarting my computer, when I haven't done a whole lot, so I don't think it's memory.
It has only happened on those sites and on both, there's infinite scrolling and constant loading of information, so perhaps it's to do with that.
It always comes back after a couple seconds if I continue to scroll, but if I stop scrolling, it stays black indefinitely.
I do have a screenshot showing exactly what it does, but I wasn't sure how to submit it, but I'd be happy to do so, if needed, if I can get some instructions on how to do it.
At this time, it's more annoying than anything else, but if it's a sign of a bigger issue with my computer, I need to figure it out.
Any help would be appreciated. ThanksAha! Here's a screenshot of what it does .... As you can see, it's not the whole screen that is black. Just the part I want to read ...
-
How do you get it to show the temperature when you scroll down?
On some some IDevices I see when you scroll down, it shows the temperature and the date. But on my iPad mini when I scroll down, it just shows the day. But at the bottom it says, " weather information provided by yahoo" I have yahoo weather installed. How do I get it to show the temperature too? Thanks.
Settings->Privacy->Location Services->Weather-> Turn it on.
It will show your current locations weather. Note that it uses GPS and internet access. so it may use your Cellular Data and battery. -
when i scrolling down/up in safari and firefox the display gets brighter (for instance when the screen and texts in a page is blue it gets light blue and little blurs by scrolling) and when i stop scrolling the screen gets plain.
If it is only blurring on the words and not the stationary dock then it is because the screen does not have a great response time.
-
Vertical scrollbar not showing all the records when I scroll down.
Vertical scrollbar not showing all the records when I scroll down.
Using Oracle forms 10g , operating system windows
I have two fields with number of items dispayed = 15.
I have a vertical scroll bar with them. There are 34 records in the table but the scrollbar only shows 15 records.
Here are the properties for block / scrollbar.
WORK_CATEGORY
- Subclass Information
- Comments
* Navigation Style Same Record
- Previous Navigation Data Block
- Next Navigation Data Block
- Current Record Visual Attribute Group
- Query Array Size 0
- Number of Records Buffered 0
* Number of Records Displayed 60
* Query All Records No
- Record Orientation Vertical
* Single Record No
- Database Data Block Yes
- Enforce Primary Key No
- Query Allowed Yes
- Query Data Source Type Table
* Query Data Source Name WORK_CATEGORY
* Query Data Source Columns
* Column Name JOB_TYPE
* Column Type VARCHAR2
- Column Type Name
- Parent Column
* Length 30
* Precision 0
* Scale 0
* Mandatory Yes
* Column Name WORK_CATEGORY
* Column Type VARCHAR2
- Column Type Name
- Parent Column
* Length 30
* Precision 0
* Scale 0
* Mandatory Yes
- Query Data Source Arguments
- Alias
- Include REF Item No
* WHERE Clause
* ORDER BY Clause job_type
- Optimizer Hint
- Insert Allowed Yes
- Update Allowed Yes
- Locking Mode Automatic
- Delete Allowed Yes
- Key Mode Automatic
- Update Changed Columns Only No
- Enforce Column Security No
- Maximum Query Time 0
* Maximum Records Fetched 0
- DML Data Target Type Table
- DML Data Target Name
- Insert Procedure Name
- Insert Procedure Result Set Columns
- Insert Procedure Arguments
- Update Procedure Name
- Update Procedure Result Set Columns
- Update Procedure Arguments
Don't know where am I going wrong. I'll really appreciate if you can help me in this.
Thanks.
Edited by: 831050 on Sep 14, 2011 8:05 AMOne of the items is a list item.. here are it's properties:
* Name JOB_TYPE
* Item Type List Item
- Subclass Information
- Comments
- Help Book Topic
- Enabled Yes
* Elements in List
* Label
* List Item Value LIST20
* List Style Combo Box
- Mapping of Other Values
- Implementation Class
- Case Restriction Mixed
- Popup Menu
- Keyboard Navigable Yes
- Mouse Navigate Yes
- Previous Navigation Item
- Next Navigation Item
- Data Type Char
- Data Length Semantics Null
- Maximum Length 30
- Initial Value
* Required Yes
* Copy Value from Item
- Synchronize with Item
- Calculation Mode None
- Formula
- Summary Function None
- Summarized Block
- Summarized Item
- Current Record Visual Attribute Group
- Distance Between Records 0
* Number of Items Displayed 15
- Database Item Yes
* Column Name JOB_TYPE
- Primary Key No
- Query Only No
- Query Allowed Yes
- Insert Allowed Yes
- Update Allowed Yes
- Update Only if NULL No
- Visible Yes
* Canvas CANVAS2
- Tab Page
* X Position 47
* Y Position 137
* Width 187
* Height 18
- Visual Attribute Group DEFAULT
- Prompt Visual Attribute Group DEFAULT
- Foreground Color
* Background Color white
- Fill Pattern
- Font
* Font Name Tahoma
* Font Size 10
* Font Weight Demilight
* Font Style Plain
* Font Spacing Normal
* Prompt Job Type
- Prompt Display Style First Record
* Prompt Justification Start
* Prompt Attachment Edge Top
- Prompt Alignment Start
* Prompt Attachment Offset 10
* Prompt Alignment Offset 0
- Prompt Reading Order Default
- Prompt Foreground Color
- Prompt Font
* Prompt Font Name Tahoma
* Prompt Font Size 10
* Prompt Font Weight Bold
* Prompt Font Style Plain
* Prompt Font Spacing Normal
- Hint
- Display Hint Automatically No
- Tooltip
- Tooltip Visual Attribute Group
- Direction Default
- Initial Keyboard State Default
- Keyboard State Any
-
How to turn off sound in twitter app when I scroll down?
I know there must be an easy way to do this, but I can't find it. I have twitter notification sounds turned off, which is what I want. Inside the twitter app, though, when I scroll down to see new tweets, I get a sort of suck-then-pop sound. I don't need that sound and would like to turn it off, as it irritates my spouse if she's nearby while I'm checking twitter.
Phone is iPhone 5, iOS 8.1.3Depends if the window has a separate volume control or not. You can have multiple QuickTime movies running with the sound muted in some but not others - just slide the volume all the way down in the ones you don't want to hear.
Other than that, I don't know of a way.
Maybe you are looking for
-
How to move the "back" button to the top ?
Hi there, I had some sub-menus and iDVD auto generate the "FORWARD" and "BACKWARD" buttons in the shape of a triangle. Problem is this buttons are alwayd at the bottom and I do not seem to be able to move the buttons around. Any tips on how to move t
-
Just updated the software on my 3G phone and the quality of the pics I have on my phone is really crap - before they use to be crystal clear now they are blurry and you cannot zoom in without it being distorted! Anty ideas??
-
Accented characters do not display correctly
Hello, I created a report in CR with an Oracle8i ODBC connection (version 8.01.74.00). The strange thing is that accented characters are displayed weird in the report although the characters are just fine when I look at them via sqlplus. At first I t
-
Wireless router on a wired system
I have a wired network system using a Pass & Seymour router. I have roadrunner and have the roadrunner router going through the P&S router. I want to add a wireless router to my system so i can use my laptop. I currently have a WRT54GS V2 linksys ro
-
Unity Connection on BE6K. 10 messages per user????
I must be misreading this surely! The BE6K Data Sheet quotes "Voicemail Capacity: 10 voicemail messages per user." http://www.cisco.com/en/US/partner/prod/collateral/voicesw/ps6788/vcallcon/ps11370/data_sheet_c78-718398_ps11369_Products_Partner_Resou