Email interface for LPOs and RFQs

A client has a requirement that RFQ and LPO go directly to the vendor after final release via email . They also want the sysytem set such that one cannot release or approve an LPO for others unless on delegation.Please give suggestions on how to handle these requirements. Thanks for your help.

Hi,
For E mail interface of any Purchasing documents read SAP Note 191470 and configure accordingly.
For restricting release to a perticular user ,consult your BASIS team and restrict the release authorisation .
Dhruba

Similar Messages

Email alerts for CPU and Memory status of CUCM

Hi All,
can anybody help me here?
Will RTMT trigger the daily email notification for CPU and Memory status of CUCM? If yes, kindly let me know the procedure.
Thanks in advance !!!!

Hi Hariharan,
In addition to Atul's link please refer the below mentioned link CPU and Memory usage
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/managed_services/cucm_health.html#wp1101115
Tx,
Hope this helps
Shalu

Do we need to create message interfaces for idocs and rfcs thatare imported

do we need to create message interfaces for idocs and rfcs thatare imported
from sap server
in scenarios from sap system to file or vice versa
i knew that we need not create message types
do we also skip creating message interfaces

hi,
you create an abstract message interface for IDOC only if you want to use
them in a BPM (integration process)
for more about IDOCs have a look at my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

Hello Nikkii,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Troubleshooting telephone-number activation (iPhone only)
After each step, toggle FaceTime and iMessage off and then on in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that your iPhone is set to the correct time zone. Tap Settings > General > Date & Time.
Note: If Set Automatically is on but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
Verify that you can send SMS messages. You need a valid SMS messaging plan to activate FaceTime.
Contact your carrier to verify that there are no restrictions or blocks on text messages. Blocks on text messaging will prevent iMessage and FaceTime registration.
If you are unable to activate iMessage or FaceTime on a device after remote wiping it, wait at least 24 hours and try again.
If "Waiting for Activation" is displayed, leave FaceTime and iMessage enabled for 24 hours. Toggling FaceTime or iMessage off and on will cause the registration process to start over.
Best of luck,
Mario

USB/Firewire Interface for MIDI and audio (Garage Band)

I want to connect a Roland Handsonic (electronic drum) and Shure microphone to a Mac Pro for recording in Garage Band. What is the best USB/firewire interface for MIDI and audio?
Mac Pro desktop Mac OS X (10.4.8)

If you click one of the links you can read all about it in depth.
three guitarists
That's not what you asked for B-)>
Once you want more than 2 audio inputs, the prices start jumping up dramatically.
would this be the best interface to use?
If you really want "Best" then it's a simple answer:
http://www.bulletsandbones.com/GB/FirePod.html

Im tryin to get my email verified for iMessage and FaceTime, but i don't received any emails. All info are correct (correct apple id and password). Though, i don't have any sim on my phone.

Im tryin to get my email verified for iMessage and FaceTime, but i don't received any emails. All info are correct (correct apple id and password). Though, i don't have any sim on my phone.

You can take a look at this support document for troubleshooting iMessage and FaceTime activation. If you have difficulty activating FaceTime or iMessage - Apple Support
I believe with the iPhone, you need to have a SIM installed, since the activation sends an international SMS to servers in the UK. Check to see what that support document states.

Email activity for soa and bam with pre-built virtualbox images

Dear OTN,
i am running pre built virtualbox image for soa and bam and want to run with email activity and configure the email inside the virtualbox can anyone help me with email activity in pre-built virtualbox image.
Thanks & Regards,
Pavan

Hi there
I have a Technote that shows how the information can be published from EBS to BAM. In addition you could create an end to end visibility across the products e.g. B2B - BPEL - EBS - Financials etc by raising the events to BAM .
There is no out of the box dashboards available today. However, i have a number of customers who are doing this use case by themselves or through some SI/Oracle consulting.
can we contact you offline to discuss your requirement?
http://www.oracle.com/technology/products/integration/bam/11g/technotes11g/whitepaperBAM_E-BusinessSuiteIntegration.pdf
There are certified adapters available for EBS to FM as well.
Regards
Payal
Edited by: PayalS on May 21, 2010 4:25 PM

Need query for requistion and rfq numbers

Dear All,
I need a query to list all requisition number for which RFQ is created and RFQ is partially converted to PO, if RFQ is fully converted to PO, it should not fetch the details.please help me on this.
Thanks
Debendra

Are you referring to sourcing RFQ or core quotations?

Pop3 Email Software for Win8 and Comcast

Wife's son just called... he has a new computer with Win8, and he uses Comcast for Internet and email
The Win8 email "APP" does not want to work with Comcast, and he doesn't want to spend the $$ to buy MS Office to be able to use Outlook
Does anyone know of a free or low cost email program that will work with Win8 and the Comcast Pop3 mail server?

John, see if he's tried these settings...port 25 ( default maybe ? ) doesnt work anymore..
http://customer.comcast.com/help-and-support/internet/email-client-programs-with-xfinity-e mail
I'm using a real old outlook thing but will check in computer and see if I have anything else...doubt it though.
good luck...

Email notfication for Customer and Contact person Created In CRM to the User

Hi All,
In one of my requirement, when a customer and Contact person is created in ECC or CRM a Mail should send to the user who created. There is
middleware setting between ECC and CRM. Mail Should trigger in CRM system only.
I know to trigger email for transaction data using Action Profile.
Could any One guide me to trigger email notification for Master data (Business Partner).
Thanks in Advance.
Regards
RR Pradhan

Good afternoon Pradhan
1.I think it would normally be done through a mini wf which should start on event "partner created".
Your wf should have another step with a custom method to determine the email address and feed it to a container. You would then use this container in a subsequent email step with recipient type "email address".
2.In the case of actions I think you should use as processing time the option : Processing using the Selection Report (Action Monitor) (tnx sppfp)
As processing type you should probably have a method that sends an email.
Most likely the recipient email address should be determined in the same method by reading the attribute BusinessPartnerERM.CreatedBy.
In the scheduling conditions you could use the standard attribute BusinessPartnerERM.CreatedOn, in a combination like BusinessPartnerERM.CreatedOn = Today () ;
Hope this helps.
Regards
Razvan Zainea

Email notification for SDCR and SDMJ

So for ChaRM we are using both Transaction Types, SDCR and SDMJ.
SDCR for creating a CR.
SDMJ for change document.
Now for each Transaction Type i'd like to create Actions (within custom Action Profiles) to generate an email to the "Change Manager" Business Partner when a CR is created. Then after it's approved, i'd like to send an email to "Current Processor" and "Change Manager". How can i get the emails to be sent out to both Business Partners?
Also, I'd like the email to go out when there's an update to the Cycle Status. What field/column do i use for that?
I looked at the blogs on SDN but it did not answer that.
Any suggestion/input is highly appreciated.

HI,
Please have a look at the following doc:
http://www.renet-web.net/2009/07/23/automated-emails-in-sap-solution-manager-made-easy/
U may need to make some minor modifications to get ur requirement. I hope u will be able to do that once u go through this.
Rajeev.

Email notification for SHC and GR

Hi I would like to know is there are way to email a notification to the approver once shc is created? thus sends another notification to the next approver?
I would like to know if there is another way aside from the standard report RSWUWFMLEC?
If ever is this doable by just configuring Define Recipient of Notifications in spro? or any other way.
Has anybody also used BBP_ALERTING?
I also have a requirement that X days before recipient, there should be an email notification to the requester and the recipient.
Thanks!
Cindy

Hi
Which SAP versions are you using ?
Refer to the following links.
SRM Notification sent but user has not received the work item
Offline Approval: RBBP_NOTIFICATION_OFFAPP Vs RSWUWFMLEC
Email Notifications for Ad hoc Approvers
Email notifications
Setting alerts in SRM when SRM can't communicate with XI

Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Email client for N97 and Gmail THAT WORKS . . . .

Hi
After a year, yes, that's right, a year of trying to get my Nokia N97 to work as an email client for Gmail using Nokia Messaging without it just simply stopping for days on end I finally found something that works (or at least appears to so far!). You have to pay US$ 24 for it but you get 30 days free and it really does work inc IMAP push mail. It's called Profimail from www.lonelycatgames.com.
PS I don't work for them . . .

michael_rod wrote:
I use the Opera's mail client on the PC for my mails....
I wanted to know if there are any programs for nokia 580 that can sync and retrieve/download new/old mails from the PC to the phone...
Opera is not supported. You can only sync with Outlook using Nokia PCSuite.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

"securely" use one ethernet interface for WAN and other for the LAN

I am reconfiguring our dual 2.7 Intel Xserve running MacOSXServer 10.5.4, and had a question.
Is it possible (or advisable) to use en0 to perform LAN services, and then configure en1 to only allow access to very limited service. VPN, FTP, CALDAV and later Mail.
I imagine that this is possible via a firewall configuration, but first I do not know how to specify interface in addition to ports, and second I don't know how advisable this would be.
Currently I have a DSL package from ATT with 5 static IP addresses. I have an Airport Extreme set up as one of those addresses providing DHCP and NAT to the LAN. I am using the LAN ports on the back of that to bridge my three switches (2 managed [clients and oce print server 100 base-T] and 1 unmanaged [ laser printers and copier 10 base-T]).
I have the LAN based on 192.168.0.x, with the Xserve at 192.168.0.5. I have DNS configured and working (Thank you Antonio Rocco)
I have 20 LAN clients, 18 mac 1 PC and one PC via Parallels. I will have no more than 1 or 2 WAN clients at any one time
I provide AFP, SMB, Directory Services currently. As part of the reconfigure, I desire to take better advantage of the collaboration tools to provide wikis and CALDAV services. I also want to allow our employees to publish their individual calendars, so that they can subscribe to them at home, or vice versa.
I would like to configure VPN, one for me to access configurations when I am away using Remote Desktop (I have used command line to some extent, but still feel more comfortable with the GUI tools) and second for limited access to content for certain users.
It would also be very helpful for us to have a FTP site. It is unnecessary for this the be a FQDN service, sending the IP address is perfectly acceptable as we only use a service like this 10-15 times a year.
(Related but unimportant in the grand scheme, is there a way to generate a link to the FTP server that you could email that not only is a link, but also a temporary username and password?)
Thank you in advance,
Ion Webster

First, I missed a zero in the network speeds, I have two managed GbE switches that have all of the GbE capable machines connected to them, and an unmanaged GbE switch that has all the 10 or 100Base-T connections. My apologies for the mistake. That was one of the reasons I went with the GbE capable Airport to bridge the switches.
Ok, I had been leaning towards a separate hardware firewall, but here is also where there is a hole in my knowledge. Do I need to look at something like the Linksys RVS4000 which bills itself as a +"4-Port Gigabit Security Router with VPN. Secure, smart Gigabit networking for growing business"+ I would like easy configuration, as I take care of these systems in addition to my job, rather than full time. This will be the first time I have set up a VPN connection, so even though I have spent a lot of time researching the manuals, and reading Schoun Regan (Apple Training Series) I don't have real world experience here. So if I buy more hardware, I want it to be the product that will provide the protection, and also allow me to configure it so that I can get these services running. All my VPN clients are running Macs, most on an AIrport connection and have their IP ranges in the 10.0.1.x range. all but one is on OS 10.5.x so I have a fairly homogeneous set of machines to make work together.
I will review the links you provided regarding static routing, but I do believe the hardware solution is a better one, and wish to pursue it, for all the reasons you give, and that in the brief perusal of the links, it is more than I want to tackle.
As far as FTP vs sFTP, I have no preference. I simply want a way to have online storage for transfer of large files on occasion. Ideally I want a folder, or a series of folders that are accessible for my LAN users to put items in and take them out, and for my (s)FTP users to do the same
So long story short, the hardware solution I would like to purchase, I need to be able to do the following:
VPN connections for content access and ARD access ( knew about and will ensure differing IP ranges)
(s)FTP
Calendar publishing
mail(at a later time)
Thank you for your help thus far.
Ion Webster

Email Notifications for Switches and Routers

Dear All,
How may I configure switches and routers to send email notifications when link is UP/Down.
We have Switches - ((C3750-IPBASE-M), Version 12.2(25)SEB4) & Routers - (C2900-UNIVERSALK9-M), Version 15.1(4)M3.
Thanks in Advance,
Best Regards,
Taufeeq.

You can use EEM scrip to achieve the same. Just check EEM scripting in the community directory for some examples.
Regards,
Sathvik

Email interface for LPOs and RFQs

Similar Messages

Maybe you are looking for