Email issues because verification has failed.

My iPhone 3GS will not connect to iCloud email.
I am getting a message that says:
Verification Failed
The certificate for this server is invalid. You might be connecting to a server that is pretending to be "setup.icloud.com" which could put your confidential information at risk.
Then all I am offered is the "OK" button.
I removed and then added my account info again, but that did not fix the problem.
Any help would be great.

Try resetting the iPhone.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings the restart your iPhone.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
And on the iPhone tap Settings > iCloud. Make sure Mail is switched on.

Similar Messages

  • IMCEAMAILTO issue causing "Delivery has failed ...".

    What started as a single user experiencing an issue sending emails to some addresses has started to become multiple users.
    In Outlook 2007, when a user does a reply to some emails the E-mail Type: changes from the normal SMTP to MAILTO and then when the user sends the email it is rejected because either Outlook or our Exchange server is adding @domain.local to the end of
    the
    recipient’s email address.
    This also happens with emails where the senders address is shown as a clickable option [mailto:[email protected]].
    Email address has been changed to
    [email protected] for confidentiality reasons.
    Delivery has failed to these recipients or distribution lists:
    '[email protected]'
    A problem occurred during the delivery of this message. Microsoft Exchange will not try to redeliver this message for you. Please try resending this message later, or provide the following diagnostic text to your system administrator.
    Sent by Microsoft Exchange Server 2007
    Diagnostic information for administrators:
    Generating server: mailserver.ourdomain.local
    [email protected]
    #550 5.4.4 ROUTING.NoNextHop; unable to route ##
    Original message headers:
    Received: from mailserver.ourdomain.local ([fe80::d597:2413:93ab:cf17]) by mailserver.ourdomain.local ([fe80::d597:2413:93ab:cf17%13])
    with mapi; Thu, 14 Oct 2010 13:58:28 +0100
    Content-Type: application/ms-tnef; name="winmail.dat"
    Content-Transfer-Encoding: binary
    From: Internal User <[email protected]>
    To: "'[email protected]'"
    <[email protected]>
    Date: Thu, 14 Oct 2010 13:58:27 +0100
    Subject: email
    Thread-Topic: email
    Thread-Index: Actrn34QI8tEGRBCR/qQGIH5MxGgyA==
    Message-ID: <[email protected].local>
    Accept-Language: en-US, en-GB
    Content-Language: en-US
    X-MS-Has-Attach: yes
    X-MS-TNEF-Correlator: <[email protected].local>
    MIME-Version: 1.0

    Okay here's the skinny.  I don't see an immediate patch coming out for this.  Also I'm concerned that Microsoft sees this currently as a single call, not that a bunch of folks are impacted. 
    While there is a bug they are tracking on this Offug49462, short term there will only be info detailed in the security update that there's a side effect of this update.  No eta of when exactly that wording will be posted in the bulletin, but that certainly
    will be sooner than a patch fixing this.
    The trigger appears to be when you click on mailto links.
    You have two choices as I see it:
    1. uninstall the patch, and wait until I post back that there is an ultimate fix.  I don't see this coming out in a week or two honestly, so be aware that per my read on the situtation, this won't be resolved quickly with another patch.
    2. leave the security patch on, and as a workaround to ensure that you don't accidentally click on a mailto link and thus flip your email addresses and get NDRs to do the following:
    In Outlook:
    Click Tools > Options
    Click the Mail Format tab
    Click Editor Options
    Click Proofing
    Click AutoCorrect Options
    Click the AutoFormat Tab
    Uncheck "Internet and network paths with hyperlinks"
    Click OK, OK and OK
    Neither one is good, but it's all I have right now until something is coded up long term.
    So here's where you can do me a favor.  Call 1-800-Microsoft and explain to them you have an issue with a security update 2344993, say that you too are impacted by Offup49462 bug and tell them how many in your firm/office/school have been impacted.
    Like I said right now they only have one call on this issue, and I'd like to ensure they see more numbers of impacted people.
    Thanks.
    Susan-at-msmvps.com

  • Satellite A200 - WebCam issue - webcam drives has failed

    Hi,
    I need some help regarding the integrated webcam of my Satellite A200.
    Everytime I start the laptop I keep receiving a message saying that the webcam drives has failed and I have to restart the computer, but the problem persists.
    I have downloaded an updated webcam driver, but nothing.
    Can anyone give me an idea of what is going on?
    Thanks!

    Ok - I've had the same problem:
    "Everytime I start the laptop I keep receiving a message saying that the webcam driver has failed to load and I have to restart the computer"
    Same when trying to update driver from Toshiba site, same when rolled back / uninstalled drivers, then re-installed default drivers. Nothing worked.
    Sorry - but the solution that worked for me wasn't easy.
    I had to disassemble the laptop to take a look - fix something else ( wireless on/off switch had broken / jammed in off position - lugs had snapped on back of the slider switch on the case, but no problems, I just left it in "on" position, as wireless can be switched off in software anyway). I decided as I'd got that far already, to pull the laptop completely apart and clean it out properly.
    There's a shielded cable running from the webcam in the lid, though to a small white socket on the motherboard, accessible under the keyboard, next to the wireless board.
    I was disconnecting various other cables etc, and came across this one disconnected, and couldn't remember disconnecting it myself. Hmmmm...
    Anyway, I connected it back up on reassembly, it pushes in to the socket and seems seated, but needs an extra little push to "snap" securely in place.
    My guess is that some of these haven't been seated properly ex-factory. They probably work just fine, until perhaps through repeated flex on the back of the keyboard when typing, or opening and closing the lid, the connector falls out of the socket.
    Anyway - my webcam works again now. (using Vista SPII and all current updates, but in my case that's not relevant, as it was NOT a software or driver issue).
    There's instructions (with pictures) for disassembling the A200 on the net - use google to find them. You don't need to pull it completely apart, just to the point where you can get the keyboard out, then you can access the connector.

  • TS3988 i have updated my phone with the new software and it keeps saying that verification has failed on my icloud and that the certificate for service is invalid.  following this now my phone does not recognise any of my iphone contacts and so i cannot f

    i have updated my phone with the new 6 IOS. Since doing this my icloud account keeps saying that verification failed and the certificate for service is invalid.  Folowin this problem my phone also does not recognise my other iphone contacts so i cannot facetime or send imessage

    You don't need an app. You need couple's counseling. I believe what you want to do may also be illegal in many jurisdictions.

  • How can I cancel my contract with Verizon without any fees because Verizon has failed to provide me with a workable phone for over 2 months despite many hours talking to tech support and several replacement phones, batteries, power cord, and sim card etc

    How can I contact a representative of Verizon to help me cancel my contract so I can switch carriers to get a phone that is reliable and a Co. that supports its products?  Verizon seems to have many blocking scripts or dead ends when trying tio contact someone  who can help the customer. How can I get around the blocks and get to someone who can directly answer my questions? I have one of those "hot" phones that were recently seen on the news, yet no one seems to be able to help me resolve the issue. I have no idea where this comment goes, or who reads it?
    Jim R

    The phone is your responsibility, if it's before the 1 year warranty you can get defects fixed by the Manufacturer  of the phone. If you want to leave pay your termination fee, or find a carrier who claims they will do it but don't really expect it to happen either.

  • I was updating Firefox from version 6 to version 7, after updating I tried to open Firefox and the message I got is this: This application has failed to start because xul.dll was not found. How can I fix this?

    I was updating Firefox to the newest version 7.0.1 from version 6.0.2 I think it was, I clicked the restart Firefox button that always comes up after updating. It started updating and then Firefox never restarted like it was supposed to after it was done updating. I then tried to open Firefox and it told me "This application has failed to start because xul.dll was not found." I did have Firefox crash on maybe about 30 minutes or so earlier which bothered me because I have been using Firefox for years and never had it crash on me before but I didn't think much of it at the time it happened because I was able to go back onto Firefox and finish what I had been working on. A while later I checked for updates and updated. The first time I tried to update it didn't work though so I had to shutdown Firefox and reopen Firefox and start the update a second time. It was after the second time that when I tried to open Firefox I got that message about failing to start because xul.dll can't be found. I filed a crash report when my Firefox crashed. This would have been around 1am-2am in the morning that Firefox first crashed and then wouldn't allow me to open it after updating. I have a DELL laptop running the Windows XP operating system but the laptop is probably at least 6 or 7 years old. The laptop will no longer charge so I always have to have it plugged into an outlet. Both my laptop hard drive and my external hard drive give me messages that I am running out of disk space on my hard drive. I bought this laptop 6 or 7 years ago second hand so it could be even older. In short it's a piece of crap and it gives me all kinds of issues but I currently can't afford a new one, but I have never had any problems with Firefox and I use Firefox more than any other aspect of my laptop so it's really really bothering me. May you please help me fix it?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.

    I recently tried to download the latest version of iTunes, but an error occured during the process. It was recommended that i reinstall iTunes to attempt to correct that problem. After I attempted to reinstall, an error came up with the title "iTunes.exe - Unable to locate component." the body of the error message read "This application  has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." When I click "Ok", another error message pops-up reading "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)". I tried reinstalling iTunes 3 times now, each time with the same result. What is going wrong, and what do I need to do?

    Kappy, I completely overlooked your original response due to it's small, one line nature and poor UX design of the area surrounding the message area.
    Upon following the complete instructions linked from the link you posted (http://support.apple.com/kb/HT1923?viewlocale=en_US&locale=en_US), my first attempt resulted in everything being installed except for iTunes. So trying yet again.
    I do have Safari for Windows Vista installed, which is why I could not delete everything in the C:\Program Files\Common Files\Apple\ folder. I'm guessing this is Apple's way of completely removing Safari Win from history (there's always an under-the-table reason when something like this happens with Apple installs, they just won't say it publicly). Uninstalling Safari. Uninstalling Safari removes the remaining "Internet" files from C:\Program Files\Common Files\Apple\
    Uninstalling iCloud. Uninstalling MobileMe Control Panel that was never used. That leaves only QuickTime installed as an Apple product on my machine.
    Just for the record, I did not have this folder: C:\Program Files\iPod\
    Emptied the Recycling Bin.
    Shut down and fresh start-up.
    Install attempt again: results in the installer saying something interrupted it (no other programs open)
    Installing again immediately after error: Success
    Clearly there are issues with this installer.
    A pop-up shows up with "The registry settings used by the iTunes drives for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burining software. Please reinstall iTunes"
    No other CD burning software installed other than what came pre-installed by Gateway and a install of Windows Vista Pro (or whatever the top expensive one was called).
    iTunes launched. iTunes Library, items like Movies & Music, and playlists are still intact and usable.
    Good thing I don't have these issues on my Macs (ahem, which is why these errors are allowed to persist by Apple to discourage Microsoft/Windows/PC use and purchase, all about the money and Apple has become the non-caring giant it once sought to overthrow as the underdog, miss those days).
    Thanks Kappy. Thanks for the time suck Apple.

  • HT6001 I have tried numerous time to update iTunes to Version 11.1.4.  Each time it has failed. I get the message of "This application has failed to start because MSVCR80.dll was not found".  Also I get a message of "Error 7". Advise please.

    I have tried numerous time to update iTunes to version 11.1.4.  It has failed every time.  Now I can't even get into iTunes on my PC.  The message I get is "This application has failed to start because MSVCR60.dll was not found.  Re-installing the application may fix the problem."  Okay. Which application?  What steps are needed for this process?
    Also, I get this message "iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 126)"  Could someone please assist me in the steps necessary to remedy this issue.  Thanks.

    For many users at this point in time (iTunes 11.1.4.62) uninstalling iTunes alone is not enough and they may need to undertake further steps...
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT1926 I try to download Itunes and when i am done it i tried to open it and it said "This application has failed to start because MSVCR80.dll was not found. re-installing the application may fix this problem"

    i tried to open itunes and it said "This application has failed to start because MSVCR80.dll was not found. re-installing the application may fix this problem" and "itunes was not installed correctly. please reinstall itunes. Error 7 (windows error 126)" what does this mean and how do I fix it? I reinstalled itunes and this just popped up again :C

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • ITunes will not open, get error message 7(windows error 126) this application has failed to start because d3d9.dll was not found. re-installing the application may fix this problem. well i did and did not fix anything.

    this application has failed to start because d3d8thk.dll could not be found. I looked that file up and it seems its part of directx. i installed directx again but that still did not help.

    d3d8thk.dll
    That one is a DirectX 8 module and might not be included in the most recent DirectX 9 redistributable available from Microsoft. If it's been installed as part of a partial DirectX 8 install (as part of a game for example), that can cause the issue. Can you track down a full DirectX 8 redistributable? If so, if you install that, does that clear up the iTunes error?

  • On messages i put on my email adress to sign in. then it gives me unable to verify adress. an email with a verification link has been sent to the above email adress. what do i do?

    I am so angry at messages because when i am trying to sign in, they want my email adress. when i put my email adress it says unable to verify adress. an email with a verification link has been sent to the above email adress. I did that like over a billon times and i am so desprate to talk with my friends. please please help this is really troubling me. i even tried to put in my apple id and still didn't work all it said check mail but i delete it. plz plz help

    The message you go says that Apple sent to the email account you used an email to verify your email account. You have to open up that email message and then click on the link inside to complete verifying the email address.

  • TS1717 Can't open iTunes, keeps getting this error "iTunes.exe - Unable to locate component. This application has failed to start because MSVCR80,dll was not found"

    Can't open iTunes, keeps getting this error "iTunes.exe - Unable to locate component. This application has failed to start because MSVCR80,dll was not found"

    Solving MSVCR80 issue and Windows iTunes install issues.

  • Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

    can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • CTI Warning: The call has failed because of network interruption

    Hi, one of agents received incoming call and his call dropped within few seconds and error on CTIOS agent desktop was "CTI Warning: call has failed because of network interruption". I investigated and got info from icm database schema that this error is 26-U-Abort and caused due to network congestion. Network team shown the logs and no error regarding network found. What else could be the reason?

    Hi Folks, I am facing the same issue with multiple Agents on random PCs. So it doesn't look PC issue or Phone issue. these Ip Phones not IP Comm.

  • When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

    When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
    Regards.

Maybe you are looking for

  • 64-Bit DSNs are not displaying in SSIS connection manager

    Hi Team, I came across an issue while working with 64-Bit SQL Server 2012 version. We installed 64-Bit SQL Server 2012 version on a 64-Bit Windows Server 2012 machine. I created two 'System DSNs' under 64-Bit ODBC driver those are for 'IBM iSeries ac

  • SRM-MDM 3.0

    Hello. I try to look in the sdn but i didn't the solution for me question . Can i install SRM-MDM 3.0 with SRM 4.0 - SRM_SERVER 500 ? if you can help me to find documentation about it . Thanks Menashe

  • Adjustment brush sometimes gives blotchy results

    I noticed this during the public beta of Lightroom 2 but figured either it was me or they'd fix it in the public release. Well, today I see the "problem" if it is a problem is still there, so perhaps it's me, in which case I'd be grateful for some he

  • Application launched from Windows using Unix Adobe Document Server  Issue

    Hello,<br /><br />Sample application is written to merge two or more pdf files using Adobe Document Server.The sample application is using Webservice and laucnhed from Winodows and the AdobeDocument Server is in Unix.<br />I am getting following erro

  • A DIFFERENT spinning ball problem

    I've got a spinning ball problem, but NOT caused by the autosave or recent items bugs. While attempting to print from AppleWorks to a network printer, the program froze up. I did a Force Quit, but then got some very odd bugs. Now when I try to start