Email issues on Pantch Breakout after OS update

I just purchased a Pantech Breakout. I had set up my e-mail accounts (gmail, hotmail, and yahoo) and everything was replicating fine. The OS updated and suddenly replication stopped. I tried deleting the accounts and re-adding them, but on re-add, they no longer sync. When trying to connect, it sits and "spins". Yes - the username and password entered is correct.
Since I just bought it, I am still in the period of return - although I'd rather not have to pay money to return a non-working device. But if I can't get e-mail on my smart phone, what's the point.
Any help out there? I'm giving it one more day before I go back to Verizon and ask for my money back for a defective device.

Hello djo1300
That's not supposed to happen with the email. Let's work together and get this fixed. You shouldn't have to pay any money to return a defective device. I'm sure we can get this addressed for you.
Is background data and sync checked? To check this go to: Menu> Setting> Accounts & Sync> then check background data. From that screen please tap on each email account and make sure sync is checked then retest.
Are you able to use the browser on the device? Is Wifi turned on? If so please turn Wifi off and retest. Please remove the battery and sim card for 15 seconds, reinsert and power on the device. Does the email sync now?
Did this start after a particular application was downloaded? If so please remove and retest. Please back up the device with gmail and perform a hard reset. Here's a link for the reset: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=45472
Please let me know if this helps, if not I would be glad to further troubleshoot with you.
Thank you
JoeL_VZW
Please follow us on twitter @vzwsupport

Similar Messages

Email issues on iPhone 3GS after OS4 update

Hi,
I updated my firmware to OS4 yesterday, and my email has been on the blink since then.
Basically, whenever I check my email, I get stuck on the "Connecting..." display forever. The phone never checks my mailboxes, it's just eternally "Connecting..."
The only way I've gotten around this is by turning off the phone, then turning it back on. Once I do that, the phone collects the mail - but only ONCE. After that, it goes back on the endless "Connecting..." loop.
What's the problem? I never had this issue with the last firmware. Just as of yesterday. I have three email accounts on my iPhone - but like I said, the old firmware handled all of them without issue.
Any answers would be greatly appreciated.

I had two users that were unable to get email from Microsoft Exchange 2003 on their iPhone 3GS after upgrading to iOS 4. One other user, however, had no problems after the upgrade. The only difference was that the user with his email functioning had minimal messages in his Inbox.
So for the two other users, I archived email messages to reduce their Inboxes from around 13,000 messages to below 2,500 messages. Once I did this, email started flowing through just fine. I did this to the Sent Items as well, and it worked too. I would give that a try.

Photo issue on iPhone 4 after iOS5 update

Since i have updated my White iPhone 4 to iOS5 some of my apps pictures dont appear just the text underneath them. I thought nothing of this at first as after a while they do appear but then others will dissapear!
I tried to use the camera and i can take pictures but if i try to load the camera roll from either the camera app or photos app it will not allow me to view them. In the camera app the photos are also black.
Any assistance would be much appreciated!
Thanks
Steve

I´ve got the exact same problem as well. Via photo stream I can get my pictures to my computer and my iPad and they look fine. And in the iPhone they look ok if I choose "Edit", but the previews are low res or just grey boxes, or duplicates of other images.
Via photo stream I can copy the images to my computer to save them. But since movies don´t go into photo stream, and I cant see anything on my Iphone via iPhoto or "Image capture" they will be lost if Apple doesn´t solve this problem (I´ve succeded to e-mail them to me, but then they are compressed and lores).
This happened to me a couple of days after I updated to iOS5, so it worked just fine for a couple of days before this problem appeared.
I really hope Apple will address this issue very soon, since I (and many with me) use my iPhone as my only camera.
I´ve got an iPhone 4 (my wifes iPhone 3GS has not yet shown any signs of this problem).

Email Accounts no longer connect after software update

Hi,
I updated to the latest software and after doing so my email accounts that do not use the BES are failing to connect. For example, yahoo email, google email, or my service provider host email do not connect.
I have deleted those accounts, restarted the phone and attempted to reconnect to them but they all say the same thing that they server is unavailable and the account cannot be added. Now, I could understand one of those, but all of them with the same issue?? There is something else at work here.
Since my service provider is not the issue in this case, the phone is, how can I get this corrected?
thanks.

Ignore that advice (for now) regarding a security wipe. This user is making many off the cuff posts with, quite frankly poor advice and poorly explained suggestions.
You might first connect with your BES Admin and confirm that some IT Policy disallowed personal email accounts (you mentioned your work email on BES is working correctly, so you are obviously getting good data connections).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Preview email share doesn't work after TB update

After I applied the TB 1.2 firmware update, the email share in Preview & Acrobat (11) stopped working. In Preview I only get the message & airdrop options. In Acrobat I get the error "The SendMail doesn't know how to talk to your default mail client. Please select a different mail application to use.". It may just be a coincidence it happend after the FW update, but I use the share option all the time & the FW update was the only system change made.
thanks
jeff

found the soultion in aninterestedparty posting:
aninterestedparty
Re: Preview 6.0, no send file as email attachment?
Aug 20, 2012 5:37 AM (in response to aninterestedparty)
Doh, I've found the answer to my own question.
In Mail Preferences, under 'General', the first preference is "Defaut email reader" which should naturally be 'Mail 6.0'. Very bizarrely Parallels had changed this Mail Preference to some weird Windows program [Disk Clean up or something equally random] thus preventing me from emailing anything from any program. I discovered the answer on a Microsoft Word forum [how ironic is that] as the 'Share as email attachment' option wasn't working in Microsoft Word.
Has anyone else discovered Parallels to be messing with their Preferences?

X issues - no xrandr scale after Xorg update (MBP Retina)

Hi,
I just did a full update (2014-08-16) through pacman, which included an Xorg server update (1.15.2-1 -> 1.16.0-6). My previous full update had been just over a month ago (2014-07-08).
On logging in, KDE basically was running incredibly slowly (ie: clicking the KMenu button would only result in it opening after a few minutes, and this would get no quicker as time went on - it was basically unusable). Moving out my .kde4 directory and letting it be recreated solved this (I haven't had a chance to go through and work out exactly what setting was causing the issue yet).
More importantly. because this is on a MacBook Retina Pro (MacBookPro10,x) - I need to be able to scale the screen to make everything appear at reasonable sizes.
Previously I had an xrandr script running on startup which just ran "xrandr --output eDP-1 --scale 0.666667x0.666667" - which was a good size to view everything at.
The problem is now everytime I run xrandr --scale, the screen goes blank (slightly grey colour) - and I am unable to restore it (even ctrl+alt+F1 doesn't work to get to a console) - resulting in a hard reboot.
I've tried downgrading all of the X related components to the versions I had pre the upgrade, but I still have the same issue...
[2014-08-16 16:13] [PACMAN] downgraded xf86-input-evdev (2.9.0-2 -> 2.9.0-1)
[2014-08-16 16:13] [PACMAN] downgraded xorg-server (1.16.0-6 -> 1.15.2-1)
[2014-08-16 16:20] [PACMAN] downgraded xf86-input-synaptics (1.8.0-2 -> 1.8.0-1)
[2014-08-16 16:40] [PACMAN] downgraded xorg-xkbcomp (1.2.4-2 -> 1.2.4-1)
[2014-08-16 16:41] [PACMAN] downgraded xorg-server-common (1.16.0-6 -> 1.15.1-1)
[2014-08-16 16:42] [PACMAN] downgraded xorg-server-devel (1.16.0-6 -> 1.15.2-1)
[2014-08-16 16:43] [PACMAN] downgraded nvidia-utils (340.32-1 -> 337.25-3)
[2014-08-16 16:43] [PACMAN] downgraded xorg-xrandr (1.4.3-1 -> 1.4.2-1)
[2014-08-16 16:43] [PACMAN] downgraded xorg-twm (1.0.8-3 -> 1.0.8-1)
[2014-08-16 16:46] [PACMAN] downgraded mesa (10.2.5-1 -> 10.2.2-1)
[2014-08-16 16:46] [PACMAN] downgraded mesa-libgl (10.2.5-1 -> 10.2.2-1)
[2014-08-16 16:46] [PACMAN] downgraded lib32-mesa (10.2.5-1 -> 10.2.2-1)
[2014-08-16 16:46] [PACMAN] downgraded nouveau-dri (10.2.5-1 -> 10.2.2-1)
Any ideas what the next troubleshooting steps would be? I'm using the Nouveau driver, and at this point I'm basically stuck. I'm also wondering whether the previous KDE issues were related to the X issues.
Any help would be much appreciated.
Thanks,
Luke

Hi,
I just did a full update (2014-08-16) through pacman, which included an Xorg server update (1.15.2-1 -> 1.16.0-6). My previous full update had been just over a month ago (2014-07-08).
On logging in, KDE basically was running incredibly slowly (ie: clicking the KMenu button would only result in it opening after a few minutes, and this would get no quicker as time went on - it was basically unusable). Moving out my .kde4 directory and letting it be recreated solved this (I haven't had a chance to go through and work out exactly what setting was causing the issue yet).
More importantly. because this is on a MacBook Retina Pro (MacBookPro10,x) - I need to be able to scale the screen to make everything appear at reasonable sizes.
Previously I had an xrandr script running on startup which just ran "xrandr --output eDP-1 --scale 0.666667x0.666667" - which was a good size to view everything at.
The problem is now everytime I run xrandr --scale, the screen goes blank (slightly grey colour) - and I am unable to restore it (even ctrl+alt+F1 doesn't work to get to a console) - resulting in a hard reboot.
I've tried downgrading all of the X related components to the versions I had pre the upgrade, but I still have the same issue...
[2014-08-16 16:13] [PACMAN] downgraded xf86-input-evdev (2.9.0-2 -> 2.9.0-1)
[2014-08-16 16:13] [PACMAN] downgraded xorg-server (1.16.0-6 -> 1.15.2-1)
[2014-08-16 16:20] [PACMAN] downgraded xf86-input-synaptics (1.8.0-2 -> 1.8.0-1)
[2014-08-16 16:40] [PACMAN] downgraded xorg-xkbcomp (1.2.4-2 -> 1.2.4-1)
[2014-08-16 16:41] [PACMAN] downgraded xorg-server-common (1.16.0-6 -> 1.15.1-1)
[2014-08-16 16:42] [PACMAN] downgraded xorg-server-devel (1.16.0-6 -> 1.15.2-1)
[2014-08-16 16:43] [PACMAN] downgraded nvidia-utils (340.32-1 -> 337.25-3)
[2014-08-16 16:43] [PACMAN] downgraded xorg-xrandr (1.4.3-1 -> 1.4.2-1)
[2014-08-16 16:43] [PACMAN] downgraded xorg-twm (1.0.8-3 -> 1.0.8-1)
[2014-08-16 16:46] [PACMAN] downgraded mesa (10.2.5-1 -> 10.2.2-1)
[2014-08-16 16:46] [PACMAN] downgraded mesa-libgl (10.2.5-1 -> 10.2.2-1)
[2014-08-16 16:46] [PACMAN] downgraded lib32-mesa (10.2.5-1 -> 10.2.2-1)
[2014-08-16 16:46] [PACMAN] downgraded nouveau-dri (10.2.5-1 -> 10.2.2-1)
Any ideas what the next troubleshooting steps would be? I'm using the Nouveau driver, and at this point I'm basically stuck. I'm also wondering whether the previous KDE issues were related to the X issues.
Any help would be much appreciated.
Thanks,
Luke

Email issues with Pantech Breakout

I wonder if anyone else has had this problem. I got my Pantech Breakout about 3 months ago or so. After having it for a bit, I set up my email on it. About 3 weeks ago it was time to change my password for my SBC Global/Yahoo email account and I did so when prompted on my desktop computer. Don't laugh but for the next day or so, I could not figure out why my email on my phone was not working right. Ok, so I figured out I needed to change the password in the phone as well for my email - I did it for both outgoing and incoming. Now, it is acting up again. I have not changed my password for my email, I've logged on from my desktop computer just to make sure and it is the correct password. But not according to my 'little bast@rd' breakout, which says the password is incorrect. I have not had time to call tech support @ Verizon, so thought I would try this.
Thank you in advance.

You may need to completely delete and re-add the email account. It may be hanging up on some sort of cache data containing the old password.

Issue with IE images after FP Update

Good afternoon and thanks for reading.
I have a few machines (so far) which are having issues displaying some images through Internet Explorer following the FP update. The images show up as a white box with a red "X".
If the user account(s) have Admin rights they are able to see the images. If I return them to Standard User only the image problem reoccurs.
I have tried the following:
- Uninstalling FP (utility) as Administrator
- Reinstalling FP .exe as Administrator
Standard User cannot see images
- Uninstalling FP (utility) as user with Administrator rights
- Reinstalling FP (download and .exe) as user with Administrator rights
* As user with Administrator Rights the user can see images.
* Remove Administrator Rights the user can no longer see images
Computers are Windows XP SP2 (32-bit)
Flash Player (from installation file): 10.1.53.64
Internet Explorer 7.0.5730 (note: the IE Logo at the top of the "About" window is not showing up either)
Any advice would be greatly appreciated,
Michael

Update:
I have applied SP3 to Windows XP and also ran Windows Update; I then had to uninstall Flash Player (using the utility) - then reinstall as the user with administrator rights.
Once I removed administrator rights and logged on as a standard user I was able to view images normally.
I will try this one more time, but hopefully a solution has been located.
Michael

HT204563 Having an issue opening Microsoft Outlook after this update. Anyone else having this issue, and if so, do you have a fix?

First post.
Microsoft Outlook won't open after the latest security update. Anyone else experiencing this? If so, is their a fix? If so, what is it?
Thank you!

Try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

Recent emails not showing in outlook after software update

i updated my software yesterday to maverick and it has runied my search in outlook. office 2011. when im trying to search a recent email, its showing emails only until dec jan 7th 2014. the emaisl are there but im not able to use the search functions, im having to manually run through thousands of emaisl of find something i recieved 2 months ago or 3 months ago.
please advise how do i solve this. im sure, its somethign small but its annoying .
help!

Try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

My Bionic is almost unusable after the update. 10sec delays on making calls...

I have been reading the forums trying to find solutions to the issues plaguing my phone after the update the other day. I use my phone for business and cant afford these issues. The only solutions i have found is a factory reset. Really? The only solution is losing everything? Black Eye for Droid!!! It takes 10-15 seconds to actually go to the call screen after pushing call. it thinks for a minute and longer to open a email and then there is no option to reply to that email or forward it. it only allows you to read, delete it or mark it as unread. is there no other solution. besides getting an Iphone to avoid this in the future.

When did you install the update? If it has been greater then 72 hours (preferably longer) I would do a Phone Cache Wipe. This is NOT a FDR and you do NOT lose any of your data or apps or settings. This simply wipes out all of th stored in cache stuff which can include code from GB and other apps.
ICS will take a few days to optimize all of the apps and stuff you have on your phone, then it learns your patterns of usage to determine what to turn on or off etc... it only speeds up as you go along
After the Cache wipe, I have had NO issues at all with the phone.

HT204017 Email issues after the latest update

I updated to the latest yosemite update yesterday and it caused email issues. I can receive emails but when I create and send emails, they just sit in my outbox. Any ideas or suggestions? Is there a way to revert back to the previous version of yosemite?

Hi roger,
I had this same issue about a month ago. I went in and had to re-enter my password for the account I was having trouble with and then restarting my computer. If that doesn't work then I have seen people that had to go into keychain and delete their email login information and after that delete the email account and re-add it. Hope this helps.
-crazy

After I Update to IOS 7.1 I can't open the excel file attached in my email

After I updated my Iphone 5s from IOS7.0.6 to IOS7.1 when i check my email i can't open excel file attached in my email i check with my frineds phone thy have same issoue

David_PDX wrote:
Hi Alex,
The trick to this whole thing is to scroll to the bottom of the message. There should be a dashed line at the bottom of the email message with text underneath it that says, "This message was downloaded as plain text." Underneath that it should say (in blue hyperlink text) "Download full message". Select that hyperlink, and the Excel file should download completely. You should then be able to select the document and have it open correctly.
I have had the same concern regardless of file format that is sent, so I do not believe your issue is with file format. Hope this helps.
I've seen the same thing happen with images, which it displays in a corrupted form. It's fixed by downloading the full message.
There's a more serious side effect of this, which I've now seen with several types of files. If one FORWARDS the email to someone else, the attached files it sends them are CORRUPTED and unopenable too. In the case of a Word files I looked at, it had dropped the last two bytes of the file.
The workaround for that is to download the full message before forwarding.
I'm seeing this happening with so many types of attachments that I'm assuming it affects them all. Please everyone report this to Apple feedback (http://www.apple.com/feedback/). It's one thing not being able to open a file on your device, it's another to have files corrupted permanently just by forwarding.

Issues after the update from 2.5.7 to 2.5.16

A number of issues have cropped up due to / during / after the update of the forums from 2.5.7 to 2.5.16 at the beginning of this week. This is a list of those issues as I have compiled them. It is a work in progress and I will update it when more information becomes available.
1 Username and email problems for some users. (fixed 2009-12-03)
Some users have a suffix appended to their username and their email address replaced with a random string (as a consequence email notifications don't work anymore). This problem is being worked on. Time to fix is unknown. Users experiencing this problem are requested to report so in this thread: My user handle and e-mail have been changed without my knowledge Please include your old username, which Adobe ID's you have and whether you used the same email address for those Adobe IDs.
2 Some user preferences are lost when logging in. (fixed 2009-12-03)
When you log in to the forums (either manually or automatially based on a "Remember me" cookie), some of your preferences are overwritten by their default values. The most noiceable prference is the settng to display your screen name (real name) that will get reset to displaying a username. This problem is being worked on. Time to fix is unknown.
3 The Rich Text Editor (RTE) is inserting linebreaks.
When typing a post the RTE will randomly insert linebreaks.
Workaround: remove the linebreaks manually.
4 Raw (FreeMarker?) code is inserted in some posts (through the RTE?).
In some posts code appears that was not entered by the user. The code looks something like below (but there may be much more then just this one line):
function(){return A.apply(null,[this].concat($A(arguments)))}
Workaround: edit the post and remove the code.
5 The logout button disappeared.
The logout button is no longer visible.
Workaround: How can I log out from the forums?
6 Search is down on one node. (fixed 2009-12-03)
Search is down on the SGAURWA41P cluster node. This does not show itself as an error, but instead as 0 search results.
Workaround: restart all browser windows and you may end up on another cluster node or use Google with a "site:forums.adobe.com" search modifier.
7 Users have 404 problems on first request.
This is not really a new problem, but it is something that was supposed to be fixed with the update. The problem is caused by the forums inserting a jsessionid parameter in the wrong place in the URL.
Workaround: reload the page where the incorrect link is located.
8 Image upload through camera button doesn't always work. (fixed 2009-11-30)
Some people have reported problems with uploading JPG and PNG images using the camera icon.
Workaround: attach the images instead.
Update 2009-11-28:
A probable cause for the error [The content type of this image is not allowed.] when uploading images through the camera button has been identified. Internet Explorer uploads images using a Content-Type header that differs from the IANA registered type for jpg and png images. As such, the recommended workaround for people wanting to upload images using the camera icon is to use a browser that is not Internet Explorer.

Re issue 4, "Raw (FreeMarker?) code is inserted in some posts (through the RTE?)", the suggested workaround is:
Workaround: edit the post and remove the code.
With my IE 8, the workaround never works. See this test post for an example:
http://forums.adobe.com/message/2470219

When adding a yahoo email account I keep getting "Server Unavailable" notification. This started after I updated my software. I deleted my accounts and tried to re-add them but continue to get this notification??

When adding a yahoo email account I keep getting "Server Unavailable" notification. This started after I updated my software. I deleted my accounts and tried to re-add them but continue to get this notification??

hello, this is a scam tactic that is trying to trick you into installing malware, so don't download or execute this kind of stuff! as you've rightly mentioned, you're already using the latest version of firefox installed and you can always initiate a check for ''updates in firefox > help > about firefox''.
you might also want to run a full scan of your system with the security software already in place and different tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & [http://www.kaspersky.com/security-scan kaspersky security scan] in order to make sure that there isn't already some sort of malware active on your system that triggers these false alerts.
[[Troubleshoot Firefox issues caused by malware]]

Email issues on Pantch Breakout after OS update

Similar Messages

Maybe you are looking for