Email link error
CentOS 5.2
Postfix 2.3.3 (comes packaged with OS)
Dovecot 1.1.1
DW CS3
Did a fresh install and created a new web site:
http://www.imwell-usa.com.
The web site has an email link for 'Contact Us'. When I CLICK on
this link to send/test an email (from Win XP PC), I get the
following error:
An error occurred while sending mail. The mail server
responded: 5.7.1
[email protected]: Relay excess denied. Please check
the message recipient and try again.
I have read both Postfix & Dovecot documentation and have
followed their installation instructions. I am told on the Postfix
FORUM that I need to install email "Client" software on my PC.
Well I use both MS Outlook & Thunderbird &
send/receive emails from both of them without problem. What do I
need to do? Did I mention that I am new to DW CS3 and LINUS in
general!
You can try sending an email from:
http://www.imwell-usa.com/contact_us.html
page and see the error.
Please let me know what change I need & then I can study
the setting on my own.
Thanks,
Kirti
You are in the wrong forum. This is a Dreamweaver forum that
deals with web design/development issues. Your problem has nothing
to do with a web page. The problem is with your mail server.
Someone here may be able to assist, but you are better off posting
to a forum that deals with configuration details of your mail
server.
>You can try sending an email from: >
http://www.imwell-usa.com/contact_us.html
>page and see the error.
That page simply contains a mailto link. It doesn't matter if
the user clicks on that link or types the address in manually.
Again, the problem is not with the web page or Dreamweaver. It's a
mail server configuration problem.
That really should be obvious to someone trying to operate
their own web server.
Similar Messages
-
The confirmation email link doesn't work. I keep getting the 'error. try again later' message. it's been 2 days since I bought the product and I still can't activate and use it!
Make sure you have cookies enabled and clear your cache. If it continues to fail try using a different browser.
-
I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is incorrect.... please help
Ok, since this forum is for Photoshop Standard and Photoshop Extended, we don't know much about Photoshop Elements. There is a Photoshop Elements forum and I'll link it for you since they best know how to field your questions.
Photoshop Elements
Good luck on it!
Gene -
Error message appears when selecting emailed link but there's no problem
I upgraded to Firefox 7.0.1. Now, when I select an emailed link to a website, I always receive a General Failure error message indicating that Firefox can't reach the website. In the meantime, the thin red-light progress line appears and the website comes up fine. Thee error message appears consistently but there's rarely a problem reaching a website. Any suggestions on how to eliminate the error message?
I'm responding to my own post. I checked the error messages more carefully and found that they are Microsoft Outlook generated and not Firefox. This could still be a Firefox problem but I thought I should point this out.
Bob -
When clicking on a link in an email, an error message kept coming up, implying an incombatibility . Please advise me what version of acrobat reader is compatible with Windows Vista.
Is this a one-off or a general problem? If a one-off, is it a link to a web page or something else? If not a web page, try control-clicking on it and choosing to download the linked file. This will at least access the file though it might be to something you don't have an application to open with. If you do this, what sort of file do you get? - select it and hit command-i to get information on it.
-
Error when trying to open, edit & save the document from email link
Hi,
The error occurs when user tries to open the document from the email link (after the document is "shared" with them.
The recipient has been given edit rights. When the document is opened it is opened in read only. The recipient will click "Edit Document" and then they receive an error
"The file or folder name http://servername/sites/documents/Shared Documents/IT/Test/TESTfile.xlsx?NoRedirect=true' contains characters that are not permitted. Enter a different name."
Any suggestions please.
Thanks.Hi Inderjeet,
Thank you very much for you reply.
I tried with the LAN options, it didn't help.
I see that in the
http://blog.ray1.net/2007/12/file-or-folder-name-contains-characters.html it's written as the error occurs while "Creating a new site based on a custom site definition, you get the above error", which is not my case.
Mine happens when I click on the link from the email body. An exact thread I found :
http://social.technet.microsoft.com/Forums/systemcenter/en-US/d724a882-66cf-4515-a088-afd7d088b103/email-link-to-share-documents?forum=sharepointgeneral&prof=required
But no solution is mentioned there as well.
I think this is an issue with SharePoint 2013. Do you agree? I would like to invite more experts for their opinion on this please.
Many thanks & Regards -
When I click on an email link on a webpage, my computer goes crazy. (Please note that links to other websites are fine.) My computer seems to want to link me to Internet Explorer, which I don't use often. The computer starts running very fast and hot. Sometimes, I get a multitude of identical error messages from Explorer, and it is often hard to delete them!
I thought maybe I could solve this by changing my mailto: client, but there is no link for Aol. Please help!
Thanks.
ericasaunt
PS: Why am I still on AOL? I still use the first email address I got many years ago. Friends and clients know my email and use it to contact me. I don't want to change it.Hi, cor-el,
Thank you for responding so quickly!
I tried to follow the instructions, but it didn't work. There are 10 mimeTypes.rdf files on my computer!
I tried to follow the website instructions of
Tools -> Options -> Content / File Types -> Manage
but once I get to Content I am stuck. No Manage button. (there is nothing that says File Types)
What do you suggest?
Thanks again.
Sherri -
When I try to change the default firefox protocols in windows, only the nightly shows and I can not unclick it. When I attempt to click on a link in an email (Windows Live) I get "Class not registered"
I presently have IE set as my default because it is the only possible way to open email links.You can install both win32 and win64 Firefox Nightly builds on a 64-bit Windows computer. As you should know, all Firefox nightly builds are intended for testing only. If you downloaded your Firefox nightly build from http://nightly.mozilla.org/ then you got the win32 installer. (win64 installers are available from http://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/latest-mozilla-central/ and possibly elsewhere: [http://forums.mozillazine.org/viewtopic.php?p=12694481#p12694481 ref.])
Anyway, the bug report I referred to earlier ([https://bugzilla.mozilla.org/show_bug.cgi?id=870312 Bug 870312] - Installing Nightly causes "Class not registered" error on click on link in other apps after uninstall) fits your issue ("broken" uninstaller). It was triaged as a "Shell Integration" Firefox bug for x86_64 Windows 8.
Whether you had the 32-bit or 64-bit Firefox nightly installed, you can try reinstalling a more recent build of that, and then uninstall it again. That worked for a Windows user who had problems uninstalling Firefox Nightly x64 as reported in this thread:
*http://forums.mozillazine.org/viewtopic.php?f=23&t=2473175
If that doesn't work, also try reinstalling Firefox 25, to see if that helps matters.
I'm not the best person to help you, though, since I'm not testing Firefox nightly on my Win7 x64 computer. Hopefully someone will be along that can help you better, or you could try on the MozillaZine Firefox Builds forum (it's linked from the nightly.mozilla.org page). -
HP Officejet Pro 8500 A910 Scan to email failure Error Server Failure Try again Later message
HP Officejet Pro 8500 A910n ( CM758A ) Scan to email failure Error Server Failure Try again Later message
Ran HP Print & Scan Doctor - finds no problems. When sending a scanned document to the user email it has " Error Server Failure Try again Later " message . Can run test to the scanner without any errors. Tried to reset the printer - same result.
Any help would be much apreciated. AHuberHello there! Welcome to the forums @TheShadow42 ,
I read about the scan to email issue you are having and I will gladly try to help you! I would suggest checking your scan to email settings from the EWS, and perhaps run the scan to email wizard again. You should also see a scan and test option in the setup.
Here is a link to the User Manual, that has quite a bit of great info. Check out page 62 for the scan to email information.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
PDF from Word doesn't recognize email link subject
PDFs created from Word contain my active website URL links and email links, but the email subject doesn't make the conversion for some reason. If I click the email link from within the Word document, Mail launches and addresses a new message, and the subject field is filled out properly. But the resulting PDF will only create and address a new mail message, leaving the subject field blank.
As problems go, it ain't the end of the world, but it would be great to receive email that I know was generated by my brochure.
Any ideas?
Thanks!D'OH!
BD, has anyone ever held a parade in your honor?
It took me about three hours to conceive and do the layout for this flyer. Then another 5 hours trying to get it to convert properly into a PDF. When it didn't convert correctly from Word, I fired up Classic, launched an old version of Quark XPress and recomposed the flyer. But when I tried to export it to PDF, Acrobat Distiller (remember that?) just sat and spun its wheels. It did spit out a Postscript file, but it wouldn't actually make the PDF for some reason. Never even generated an error. Then, I accidentally double-clicked the Postscript file, and Preview launched as said it was making a PDF. I was a happy camper... until I discovered that this PDF was cut off on both the top and bottom.
Then I checked my email and found you had answered my cry for help (yet again).
When I followed your instructions (which I did try to find on my own before posting my plea), the PDF came out perfectly on the first try.
My thanks to you for what must be by now the 85th time.
*+The man with the answers is BDAqua.+* -
Why can't I load email links sent in emails to me on iphone mail account
Hi everytime I try and load email links sent in emails to me on iphone, I keep getting an option to mail it pop up when I press the link or an error message comes up saying "safari cannot download this file"!! This has only started happening the last few days as I could load or download everything emailed to me before that!! Please help me as its doing my head in!! Thanks
Settings>Safari>Clear cookies and data.
Double tap the Home Button, hold down an app, press the little x to remove Safari from multitasking bar.
Open Safari and try again. -
Trying to purchase trial period in different email address - error message "Error in Your Order The account was registered for a different country. Please sign out and sign in using an existing account for this country. Ok"@
Hi boags2014,
Please refer this link and know the work-arounds for the same:
How do I complete a purchase when I get an incorrect "country" error?
Regards,
Anubha -
Re: Link error during fcompile
Hi Jeanne:
I have already gone trough the procedure you have described but the
result is same.
When I invoke link command on all the *.obj files with some libraries
from forte and
MSVC/Lib I get the same Error. The command I am invoking is
C:\> link *.obj *.lib
Assuming that I am in the dir where all .obj files are and I have copied
all required .lib files in this dir. Other thing that I have also tried
this with different link flags and/or with exact flags from Forte log
file.
Thanks for your respons.
Any othe suggestions please?
--Shahzad
Jeanne Hesler wrote:
Shahzad,
Have you tried manually invoking the link command itself from the
command
line? I was able to do this successfully when having problems with
the
Borland compiler under 16-bit windows. It is not a long-term
solution,
because you obviously want fcompile to handle the entire task, but it
might
help you determine if it is a problem with the fcompile or the linker
itself.
I executed the fcompile from a DOS window in the ...codegen\myapp
directory. When the error occurred, I found the log file that is
created
from the fcompile, and determined the last command that was executed.
I
can't tell you the exact specifics here, because I have not had
problems
with fcompile using the MSVC compiler. But I am assuming that Forte
is
consistent about writing the compiler output to a log file. I could
then
copy the command line from the log file to the command line in the dos
window and execute it manually.
You have to be careful copying the command line, because there are a
lot of
flags, and they ARE case-sensitive. If you get the same error when
invoking the command manually, then you can assume that the problem is
with
the compiler itself, or as it was in my case, with the compiler
setup. If
the command is successful when you execute it manually, then you can
pursue
it as a problem with the fcompile.
One other thought -- you might make sure that you have plenty of extra
disk
space. Compilers like to write temporary files during the compile
process.
On a very large compile, you might need a lot of working space for
these
temporary files. I believe the MSVC compiler writes these files to
the
directory indicated by the environment variable TMP (not TEMP).
Hope this helps,
At 11:22 AM 10/17/97 -0400, you wrote:
Hi,
I am getting this error during fcompile of a large (12MB) pgffile
link: fatal error LNK1141: failure during build of exportes file
error during compilation, aborting
This is under Windows NT and MSVC compiler. MSVC Documetation saysthat
this could be due
to insufficient memory. But we have 0.5Geg ram and I don't even seeall
memory being utilized during compile.
Any clues?
--Shahzad
--Jeanne
============================================================
Jeanne Hesler [email protected]
============================================================The way to handle this is to break down the fcompile. Here is the
process:
1. fcompile -nocompile -fm "(x:40000)"
this will produce the CPP and H files
2. fcompile -nogen -fm "(x:40000)"
this will link the files and produce the exe.
If there is an error then you will know exactly where its happening.
Hope this helps.
Kamran Amin
Technical Leader, Software Engineering
Oxford Health Plan
http://www.oxhp.com/
From: Chaudary M. Shahzad[SMTP:[email protected]]
Sent: Friday, October 17, 1997 7:05 PM
To: [email protected]
Subject: Re: Link error during fcompile
Bruce:
I have tried that I have even tried
fcompile -fm '(x:400000)'
It seems like its the Microsoft Compiler and/or Linker problem. There
have to be some flags for compiler or linker I can
set with fcomile so it allocate more memory for the MSVC linker.
Any more clues or help ????
--Shahzad
Bruce Lipson wrote:
Chaudary,
There are flags for setting the usage of memory by the fcompile
command.
fcompile -fm '(x:250000)'
where x:250000 sets the maximum amount of memory fcompile will use to
250k.
the default is 64k.
Get it a try.
Bruce Lipson
[email protected]
-----Original Message-----
From: Chaudary Shahzad [SMTP:[email protected]]
Sent: Friday, October 17, 1997 11:22 AM
To: [email protected]
Subject: Link error during fcompile
Hi,
I am getting this error during fcompile of a large (12MB) pgf
file
link: fatal error LNK1141: failure during build of exportes file
error during compilation, aborting
This is under Windows NT and MSVC compiler. MSVC Documetation says
that
this could be due
to insufficient memory. But we have 0.5Geg ram and I don't even see
all
memory being utilized during compile.
Any clues?
--Shahzad -
Hello everyone,
I am new to the cloud. Trying to send a client a link to a design file in my cloud. But when they click the link the get an error message saying the link is no longer active. Do t understand why, can anyone help me please.File Sync Links that may help
-https://forums.adobe.com/community/creative_cloud/host_sync
-http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
-sync and email link http://forums.adobe.com/thread/1427516?tstart=0
-http://helpx.adobe.com/creative-cloud/kb/cannot-share-certain-types-files.html
-Size Limits https://forums.adobe.com/thread/1488242 -
Create service request with inbound email linked to it
Hi,
we are on CRM 7.0 and interaction center agents need to open and read inbound emails in the agent inbox and in some cases manually create Service Requests to which the email should be linked.
Is there any standard functionality to manually create a new Service Request with the inbound email linked to it or do we have to implement it with custom coding? (we have already used ERMS to automatically create Service Requests linked to emails, but in some scenarios agents need to create manually service requests linked to mails after reading the email in the inbox)
Thanks,
laura.Hi Joaquin,
Thank you for answering. I already tried: I select the line with the email in the Inbox, I press Interact (the account is automatically recognized and I am asked to confirm it), I confirm the account and then I navigate to "Service Request" workcenter: a new Service Request is displayed, with the employee responsible and the customer automatically filled. However, I can see no data regarding any attached email in any of the Service Request tabs (even if I save or select "End").
After your answer, I tried the same procedure with the "Service Ticket" and noticed that the email is correctly displayed as an Interaction Record under the Business Content tab for the Service Ticket: since you confirmed that this should work also for Service Request, I guess there's something wrong in my customizing settings and now I will search for errors.
Thanks for your help.
Best regards,
Laura.
Maybe you are looking for
-
I Am synced and have logged in with My Apple id to the iPad but now a friend borrowed the iPad and is connecting with his wi fi from an android phone can he read My messages???
-
How do you import multiple sets of tab delimited text into your form?
Is there an easy way to bring in form data from a text file of data values(tab delimited) with multiple instances of each variable? In my current project, I would like to bring name, address, phone, etc data from the text file for a couple hundred
-
Max no. of Characteristics and key figures stored in infocube
Hi All, What is the maximum number of characteristics and key figures that can be stored in the infocube? Best Regards, Chandan Dubey
-
i have been buying books from Apple for all the years they have offered them. This is the second year I have been disappointed. I contacted them the day after Christmas after looking at the ones I gave to my family. The color was not terrible but not
-
Hi All, I'm trying to run RDT on BO 4.0 using the following command on <INSTALLDIR>\SAP BusinessObjects Enterprise XI 4.0\win64_x64: reposcan.exe -dbdriver oracledatabasesubsystem -connect "UID=ceprod;PWD=ceprod;DSN=dsnname;HOSTNAME=ip of db server;P