EMail Link in SWF exported from InD CS5 does not work

I'm trying to find a definitive answer on this. I have designed an interactive document in InD CS5 that has buttons and hyperlinks. When exported to SWF everything works except my e-mail hyperlink. It works fine in InDesign's preview pane. I've uploaded the file to my webserver for testing, the problem still occurs.
I found one post in another forum that quoted an Adobe InD developer stating that as of CS4 email links were not exported. However, I've not been able to find any mention of whether this works in CS5 or not.
Does anybody know for sure whether or not email links work in SWF files exported from CS5?

Sorry, no offense was intended. I had found references to problems with CS4, but nothing about CS5, and said as much in my post -- was frustrated that I had spent a long time looking and hadn't found any responses yet.
You mentioned using buttons rather than hyperlinks, and that worked for me -- but it might have just been a problem with my browser not properly reloading the flash file, too -- as I mentioned in my response.
But in any case, THANK YOU FOR YOUR SUGGESTION!

Similar Messages

  • Wish to post KeyNote file as pdf. Export from KN to iW not working

    Wish to post KeyNote file as pdf. Export from KN to iW not working - get blank screen. Tried to upload PDF to mobile me and link to that file - also didn't work. I'm not familiar with iFrames but have read about them in this forum - is that my only option? Why wouldn't a KN export work?
    Thanks, Brian

    I have just tried this with a test site and publishing to a folder and it does work perfectly for me.
    I had a Keynote document already so all I did was click on File and then selected the Print option. I then selected the save as pdf option the the pdf document was created on my desktop instantly.
    All I then did was open iWeb and type some words in a text box My Prices. I then highlighted My Prices and opened the Inspector and went to Hyperlink and clicked on the option Hyperlink to a file. I then selected the pdf file from my desktop.
    I then used ftp to a folder on my desktop and when I opened the appropriate page, I click on the words My Prices and the pdf file opened straight away.
    As OT has suggested, check that you have linked to the correct file. If it does not work, either you have not created the pdf correctly or at all or you have not linked to the correct file.
    As I said, it worked for me.

  • Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
    Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
    If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

  • Since I upgraded to Yosemite, my CS5 does not work correctly.

    Since I upgraded to Yosemite in October, my photoshop CS5 does not work correctly. When right clicking to change a brush size, the adjuster when moving to the right or left, either sticks or moves radically. As I set the size of the brush and move my cursor back to the image, the adjuster moves with the cursor.
    Help!

    sharonfrombury wrote:
    Is there no contribution from Apple support community for this question yet?  I know there have been teething problems upgrading to Yosemite, but this loss of functionality is adding administrative workload that I can ill afford.  Come on Apple, some ray of light please.
    If you read the Terms of Use  you agreed to you would realize Apple does not read or participate in these user forums. All posts and responses are end users just like yourself. If you have feedback for Apple please  post it at www.apple.com/feedback. Please do not expect to hear back from Apple, they read the feedback but do not reply.
    Also, the feature the feature of combining multiple PDF's into one document using the Preview app works perfectly.

  • Why does right clinking on link and selecting open in new tab does not work?

    Why does right clinking on link and selecting open in new tab does not work?
    It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

    The "always match my default message font" option in the Signature preferences from Mac Mail does not work if e-mail is received in other Mail Software. How can I make it work?

    I found this plugin which solved pretty much all of my mail font rendering problems.  It is designed for Lion, so don't know whether it will work but thought I would offer it up.
    http://noware-it.zxq.net/

  • Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.'   I have an invoice and the pickup notice from

    Redemption code from Photoshop Elements 12 purchased from Best Buy does not work 'Oops! This code doesn't seem to be active. Please contact the retailer you purchased the card from, or use a different code.'   I have an invoice and the pickup notice from Best Buy.   What other information does Best Buy need?   What will they do?   Will I get a new box?   What happened to the days of just typing in a simple s/n?   

    Redemption Code Help
    http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  • Windows 7 Defrag from command line does not work

    We are running Windows 7 in a virtualized environment. When running windows defrag using schedule or from command line, it does not work. The command that I am executing as administrator is
    C:\Windows\system32>defrag /c
    Microsoft Disk Defragmenter
    Copyright (c) 2007 Microsoft Corp.
    It displays the above message and exits back to the command prompt. However if I run the command defrag C: it does work. Defragmenting from the GUI works as well as long as both the disks (C: and System Reserved) are selected and when I click on
    Defragment disks, works fine.
    I am concerned about defrag running from the task scheduler with the command "defrag /c" (auto scheduled using Configure Schedule... from Disk Defragmenter) does not work and the system never gets defragmented automatically.
    This happens only with some of the windows 7 VM's that we have.
    There are no entries in Event Log that point to the defrag (using task scheduler). Any ideas what may be going on?

    Hi,
    Could you defrag as below method:
    1. Open Disk Defragmenter by clicking the Start button. In the search box, type
    Disk Defragmenter, and then, in the list of results, click
    Disk Defragmenter.
    2.Under Current status, select the disk you want to defragment.
    3.To determine if the disk needs to be defragmented or not, click Analyze disk. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
    Once Windows is finished analyzing the disk, you can check the percentage of fragmentation on the disk in the
    Last Run column. If the number is above 10%, you should defragment the disk.
    4.Click Defragment disk. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
    For more information, please read this article:
    Ways to improve your computer's performance
    http://windows.microsoft.com/en-in/windows/improve-performance-defragmenting-hard-disk#1TC=windows-7
    Meanwhile, read this article:
    Defrag from the Command-Line for More Complete
    Control
    http://technet.microsoft.com/en-us/magazine/ff458356.aspx
    Karen Hu
    TechNet Community Support

  • HT1202 The manual mode to transfer music to my iTune from my iPhone does not work as described. When I click on Manually manage... it displays the warning message that all music on my iPhone will be erased and replaced by iTune music.

    The manual mode to transfer music to my iTune from my iPhone does not work as described. When I click on Manually manage... it displays the warning message that all music on my iPhone will be erased and replaced by iTune music.
    How can I transfer my music to a second computer iTune?
    Thanks,

    See this user tip
    Syncing iPhone to a "New" Computer or replacing a "crashed" Hard Drive

  • Right click on a link and selecting "open in new window" does not work. How do I gewt this feature to work? PS Right click on a link and selecting open in new tab does.

    No matter where the link is - in an e-mail or on a web page - the "Open in new window" feature does not work. Very annoying. Also I close Firefox in a session, but then cannot re-open it. When I shut my PC down I get a prompt to End Task -[ Firefox ] and a window opens asking if I want to save tabs and quit; quit; or cancel. After closing Firefox it does not show as an application running in Task Manager
    == This happened ==
    Every time Firefox opened
    == I recently re-installed Firefox.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • When a pdf file is opened in a tab, the automatic scroll function from the pad does not work in the other tabs, but only for the particular PDF tab.

    The scroll function from the pad/mouse does not work for the other tabs when a PDF file is opened.

    Hi NSHS,
    Have you checked to see if your PDF add-on is up to date? You should take a look at the [[Opening PDF files within Firefox]] Knowledge Base article. There is a lot of good information in there. You should try both of the suggested PDF add-ons to see if that fixes the issue.
    Hopefully this helps!

  • Unlocked iPhone from T-Mobile does not work in Switzerland

    I'm extremely annoyed. I bought myself a *so called unlocked* iPhone in Germany for 999 Euro and now it does not work with a Swiss SIM card. When I try to make calls via dialing or when i try to read text messages (sms) the phone and the sms application will crash. Calling the different helplines ends up in the same resutls: Apple care blames either Swisscom or T-Mobile, T-Mobile blames either Swisscom or Apple and Swisscom blames Apple or T-Mobile...
    In the end however, I can't get rid of the feeling that the problem could be solved by a very simple software update, because I've seen hacker reports on the internet claiming they were able to solve the problem by changing a few settings. I don't want to be forced to hack my legally bought so called unlocked iPhone. *When will Apple set the "unlocked" iPhone really free?*

    Hi Pete,
    welcome to the club! A you can see from this thread
    http://discussions.apple.com/thread.jspa?threadID=1260589&tstart=0
    you are not the only one. It seems as if the T-Mobile unlocked phones work with any German SIM card, but with non from not-Apple supported countries (like CH).
    Apple support is aware of the problem, as many of us have called them and submitted bug reports, but it remains to be seen, if Apple is interested enough in "us" to provide a solution.

  • Thumbnail view for Library copied from Asset Library does not work

    Hello ,
    I created list definition based on Assed Library (I copied files from \15\TEMPLATE\FEATURES\AssetLibrary\AssetLibrary ) - I reused schema.xml and other files.
    Then I added my new custom content type.
    The problem is following:  thumbnail view does not work now ( "/AssetLibraryDemo/Forms/Thumbnails.aspx" )
    I don't have any javascript errors and any specific error in ULS log.
    Can you give me advice, why thumbnail view has stopped working?

    I need to use "List teplates" gallery functionality for this task.

  • html:link action="" input type="button"... does not work under IE browser

    Greeting,
    I have the following codes in struts1.3.5. It works fine under Firefox, but it does not work at all under Internet Explore (IT) at all. Any clues why under IE it does not work?
    <html:link action="/private/search">
    <input
    type="button"
    value="Search"
    class="search-button">
    </html:link>
    Thanks a lot!

    This would probably generate a HTML in which there will be a button inside anchor tag.
    This is not a standard HTML feature and no wonder this is not supported by IE. I copied the generated html codes into test.html to try on IE, the button does not work at all.
    Firefox is probably lenient here. True. test.html works in Firefox.
    You might want to just have a link or do a form submission on button click.The action designed does not need an actionForm. I updated my code to :<html:button onclick="location.href='processSearch'"
    property ="Search"
    value ="Search">
    </html:button>
    And now both Firefox & IE works fine.
    Thanks a lot!

  • I upgraded my Mac Pro to Yosemite and now CS5 does not work.

    Help.....Adobe Photoshop CS5 does not load now that I upgraded my MacPro to yosemite....anybody have this problem and how was it fixed?

    Yes. The Yosemite upgrade is notorious for damaging CS5 installs. Please reinstall and let us know how it goes.
    Also make sure Yosemite is upgraded to 10.10.1
    The reinstall will set your instal to 12.0.0  If Help > Updates does not work, go here Adobe - Photoshop : For Macintosh
    download and apply the updates for Photoshop and Adobe Camera Raw.
    Gene

Maybe you are looking for

  • Hp officejet 4620 all in one

    I recently replaced my old modem & router with a new Gateway AGT784WNV Wireless Router.  I have a iMac running OS 10.7.5.  I could not use the wi fi to connect to printer as I could not locate the Network.  So I bought a 2.0 USB and connected it and

  • Certain application's JVM instance

    Hello, I didn't really know in what section to post this thread, so I figured this was the best one. If it is in the wrong section, notify me, and I will post it in the correct section. I am making an application in C which requires getting the proce

  • Selective Document Printing

    Hello All! I wonder if there are any plans on adding a feature to the new SAP upgrade which would allow selective document printing. What I mean is it would be great, when printing a batch of AR Invoices for example, to be able to select not only a d

  • Copy procedures, functions and packages to files

    Can anyone help me, how to put all procedures, functions and packages to files. It is important, that when procedure have name PROCEDURE_CREATE then file have PROCEDURE_CREATE.txt Is that possible?

  • Security for deployed Flex Apps

    I know that there are many decompilers available for .SWF files. How can you make your Flex apps secure ? I have seen this product, is this reccomened for flex http://www.amayeta.com/software/swfencrypt/