Email messages not available on server - N900

I setup gmail on my N900 but cannot read the messages. An error message reads that "message could not be found on server".
Pliz assist

me too!!
how to set gmail?

Similar Messages

  • FOUND SOLUTION TO EMAIL ISSUE - "message not downloaded from server"

    It took me 4 days to figure it out but there is a solution to the problem "the messsage has not been downloaded from server" and "the message has no content".
    I do not have to set up "push" accounts from yahoo or gmail and it works with my corporate email.
    Apple can reach me at <Message was edited by: Host> to discuss this issue.

    I'm not a computer technician, and if you were to give me a few days looking at the problem, i'm sure I or anyone else could provide a solution. I'm not too bothered about the message appearing 50% of the time as i'm usually within easy reach of a Laptop or PC or can find another method to get access to my email.
    So i'm not pi**ed off that you have found a solution. I'm just trying to obtain information for a post that says "FOUND SOLUTION TO EMAIL ISSUE - "message not downloaded from server" in the Apple HELP FORUMS...

  • Trying to buy book. Hit buy, enter Apple ID and password. Note says this email is not available. What to do?

    I Am simply trying to download an audiobook. I have done this many times with books and music. I had forgotten my password so I reset that. I click on the book, click buy, enter Apple ID and new password. A pop up tells me I have not verified my account so I click OK to do this. Message comes  up that says "this email is not available". What to do to buy this book?

    Delete them from your library including files, the go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free

  • Message "not available in the us store"

    Why do I keep getting the message "not available in the us store" when I press the update button in the app store past purchases for  os x server 2.2.2?

    All I am trying to do is access the store, I have not even tried to view anything and I cannot change my view and cannot get into the store?! I am able to view iTunes University material, but as for music, movies, TV shows, app store, books, podcasts or ping, all same message. If I try to sign in, I am receiving an unknown error message...

  • Message "not downloaded from server. You need to take this account online

    After upgrading to 10.4.9, when I click on any of the old emails in my inbox I get the message "this message not downloaded from server. You need to take this account online in order to download it."
    I can still read all email in any other mailbox.
    I can read all email received after upgrading.
    I appreciate any help.
    G4 17 inch   Mac OS X (10.4.9)   1 gb ram

    You upgraded to 10.4.9 from what?
    If you upgraded from Mac OS X 10.3 or earlier, the problem is that the conversion from Mail 1.x to Mail 2.x is broken. Take a look at the following thread to better understand the problem:
    Help! "You need to take this account online in order to download it."
    More specifically, if this is a POP account, the following procedure should allow you to fix the Inbox problem. A similar procedure should allow you to fix other mailboxes that might also be affected:
    1. Quit Mail if it’s running.
    2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
    3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
    4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
    5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
    6. Move any strangely-named Messages-T0x... folders to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
    7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
    The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
    8. Open Mail.
    9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
    10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop.
    As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
    Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards.
    If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
    Take a look at the following article (also referenced in the thread I mentioned at the beginning of this post) to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
    Overstuffed mailbox is unexpectedly empty
    Ask for any clarifications or if you need further assistance.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

  • I want to play an episode from channel seven but keep getting message not available in this region - but it is

    GOing bananas trying to play an episode from channel 7 in Perth. Tryed using Photon for flash and ads play but not main event. Get a message not available in your region.
    HOw can I catch up with my favorite programs? Tv station recommends I change my IP address but I don't know how to do that or to change it to what. Love some ideas. Thanks, Lou

    Thank you so much, Ram!  I REALLY APPRECIATE YOUR HELP!
    I am wondering if it possible to manually create a node in RSA6 for the InfoSet.  I tried it by doing the following:
    I went to RSA6 and clicked on the white icon for "Create Node".  I then entered the number "8", followed  by the name of the InfoSet.  (I entered an "8", because all our DataSources seem to start with an "8".  I'm not sure why.) 
    The DataSource now shows up, but when I double-click on it, nothing happens.  When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
    Also, do you know where I can get my hands on the white paper? 
    Thanks again!
    Regards,
    Sarah-Jane

  • HT4528 Non apple email accounts not connecting to server. How do we fix this issue?

    Non apple email accounts not connecting to server. How do we fix this issue?

    Hello countingBLUEcars,
    We've an article that can help get your Mail moving again.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Cheers,
    Allen

  • I can't seem to use the 'Check seats' link on Delta when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine.

    I can't seem to use the 'Check seats' link on the Delta Airlines site when I use Firefox but Safari works fine. I get the message 'not available at this time' when using Firefox but when I go to Safari it works fine. I love Firefox but this sucks!

    That issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox > Preferences > Privacy > Cookies: "Show Cookies"
    *http://kb.mozillazine.org/Cookies

  • WE20 use&E0336 EDI: Partner profile outbound logical message not available

    Hi
    When I am creating the vendor master, after selecting payment advise by EDI tick under APP Transactions i am issued a warning message as Account XXX has not yet been agreed as being EDI partner  and its directing me to T.Code WE20.  What is the use of this.
    I have maintained WE20 for the vendor and after running payment run (F110) with payment method as E (Electronic payments-BACS) payment medium file is getting created.  But when i go and see the SP01 in the error log the message is shown as E0336    EDI: Partner profile outbound logical message not available. 
    Can anybody explain what is the use of WE20 t.code and why i am getting the error message.
    Brahma

    Hi Deepak,
    I am facing the same problem with a different message type.
    But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
    Have you found the reason for this?
    Thanks,
    Florian

  • Business Package for Assets 50.3.1:  Error in Source. Message not available

    Hi
    Just deployed the Business Package for Assets 50.3.1 on Portal version 7 with SP8, when running the Assets detail, my assets iviews always display:  "Error in Source. Message not available."
    even all other iviews on the same page still work as expected.
    has anyone got the similar problem before? please help!!!
    many thanks in advance!
    Gang

    When logged on to R/3, choose the following from the menu:
    System > Status...
    In screen area "SAP System data" click on the button next to "Component version".
    Look for the component named only "PI", and check wether it exixts and what release it is, it should be at least 2003_1_XXX (where XXX represents your R/3 Appl version).
    Also, check that you have the component "WP-PI" installed with the release 600_XXX (where XXX corresponds to your SAP Basis release).
    I know I needed to check/install these two when I configured the Assets package.
    /Christine

  • MSS iView Error "Error in Source. Message not available"

    After installing MSS 60.1.5 (System = HP-UX 11.11 ORACLE 9.2.0.5. SAP EP 6.0 ON WEB AS 6.20)
    and trying to use the the iViews in the MyBudget workset – we are getting the following errors:
    Using iView “Chritical Variance on My cost centers” and “assets monitor” we are getting the error “Error in Source. Message not available”.
    Using iView “Critical Line Items on My Cost Centers” ” we are getting the error “An error occurred in the SAP system10 The specified SAP system could not be found null SAP_R3_Financials”.
    We have made system allias for our system oursystem = SAP_R3_Financials and the user we are using have accesse to the portal as well as the backend system.
    When creating normal SAP transaction iViews we have no problem accessing the backend system from the Portal.
    Any good ideas will be appriciated.
    Kurt

    Check out this note 790896.

  • SIP8961 press messages button and get "Messages not available"

    I can go offhook and dial the voicemail pilot number 6599, but pressing the messages button says "Messages not available” in large pop-up (see attached photo) (debug ccsip messages shows no output either).  I’m not looking for voice view express to work, just to be able to check messages.  Once I fix this is there something under voice register global I need to put for a SIP 8961 for Voice View Express in Unity Express 8.6
    If I got to a SCCP 6945 I have no problems checking messages (debug ccsip messages I get output)
    CME 9.1/152-4.M3.bin and SIP 8961 9-2-2SR1-9
    voice register global
    mode cme
    source-address 172.83.112.11 port 5060
    max-dn 1100
    max-pool 420
    voicemail 6599
    tftp-path flash:
    url service http://172.83.112.12/voiceview
    no create profile
    create profile
    apply-config   >>>>resets 8961s

    Here is a clue from the 8961's phone console log, but no fix for it yet. 
    8316 NOT 07:12:44.714324 CVM-Focus Base is class cip.comp.ao
    8317 NOT 07:12:45.678101 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR]-----KeyEvent = Key:Messages (PRESSED)
    8318 NOT 07:12:45.678396 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.sessionui.d.a$c
    8319 NOT 07:12:45.687479 CVM-ErrorLaunchingMenu: [thread=messages MQThread][class=cip.msg.Messages] PHONE_SERVICES not found
    8320 NOT 07:12:45.687638 CVM-SessionUIModel.cancelCurrentFeatures: [thread=ApplicationManagerThread][class=cip.sessionui.r] [TR] child cancelled=false
    8321 NOT 07:12:45.887444 CVM-SessionUIModel.updateSessionList(): [thread=AWT-EventQueue-0][class=cip.sessionui.r] idle=true
    8322 NOT 07:12:45.887607 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.comp.ao
    8323 NOT 07:12:46.757669 CVM-Focus Base is class cip.comp.ao
    8324 NOT 07:12:48.782303 CVM-HTTP JNI| call to ServletContainerClass_requestServlet successful
    8325 NOT 07:12:48.786899 CVM-Cannot open the /cisco/logsave directory
    8326 NOT 07:12:48.823011 CVM-Select returned
    8327 NOT 07:12:52.689269 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR]-----KeyEvent = Key:Messages (PRESSED)
    8328 NOT 07:12:52.689430 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.sessionui.d.a$c
    8329 NOT 07:12:52.705499 CVM-ErrorLaunchingMenu: [thread=messages MQThread][class=cip.msg.Messages] PHONE_SERVICES not found
    8330 NOT 07:12:52.705799 CVM-SessionUIModel.cancelCurrentFeatures: [thread=ApplicationManagerThread][class=cip.sessionui.r] [TR] child cancelled=false
    8331 NOT 07:12:53.149971 CVM-SessionUIModel.updateSessionList(): [thread=AWT-EventQueue-0][class=cip.sessionui.r] idle=true
    8332 NOT 07:12:53.150174 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.comp.ao
    8333 NOT 07:12:54.216764 CVM-Focus Base is class cip.comp.ao
    8334 NOT 07:12:54.439134 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR]-----KeyEvent = Key:Messages (PRESSED)
    8335 NOT 07:12:54.439297 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.sessionui.d.a$c
    8336 NOT 07:12:54.451505 CVM-ErrorLaunchingMenu: [thread=messages MQThread][class=cip.msg.Messages] PHONE_SERVICES not found
    8337 NOT 07:12:54.451668 CVM-SessionUIModel.cancelCurrentFeatures: [thread=ApplicationManagerThread][class=cip.sessionui.r] [TR] child cancelled=false
    8338 NOT 07:12:54.660857 CVM-SessionUIModel.updateSessionList(): [thread=AWT-EventQueue-0][class=cip.sessionui.r] idle=true
    8339 NOT 07:12:54.661022 CVM-userio.Trace: [thread=AWT-EventQueue-0][class=cip.userio.InputManager] [TR] InputManager current focus component-->cip.comp.ao

  • My bluetooth is with the message, not available. What happened?

    My bluetooth is with the message, not available. What happened?

    What do you mean you found no information?  Was the window blank?  Should look like this -

  • OSB 11g - Clustered - Email protocol not available in transport config page

    Hi,
    We have a clustered environment of Oracle SOA suite and OSB server on OEL 5/Solaris-64 Bit. While trying to create a business service with protocol as Email, we do not get email in the drop down.
    Whereas in standalone environment we got it and we are able to create the business service.
    Even while creating a Proxy Service we do not get email protocol in the transport configuration drop down.
    When I try to import a business service from the standalone server where the Business Service is created, I get the following error:
    Transport provider with id 'email' is not registered
    I am using OSB console (to import as well as create BS).
    What may be the reason? Is there any setting we need to do in a clustered environment for the email protocol? Please advice.
    Thanks,
    Sanjay

    At least a part of the answer is in http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/deploy/highav.html
    +File, FTP, and Email are poller based transports. Since these protocols are not transactional, to increase reliability and high availability, an additional JMS-based framework has been created to allow these transports to recover from failure. These transports use the JMS framework to ensure that the processing of a message is done at least once. However, if the processing is done, but the server crashes or the server is restarted before the transaction is complete, the same file may be processed again. The number of retires depends on the redelivery limit that is set for the poller transport for the domain.+
    try the suggested wlsb.internal.transport.task.queue.email
    hth,
    Peter Paul

  • Messages not available in XI after Restart

    Hi experts
    I have one query we have a scenario where in source side we are using JDBC Adapter. JDBC polls and performs Select query and after that performs update query. But in between we have restarted the complete XI box. In source side we can see the status that messages are send to XI but in XI we can't see any messges in Adapter as well as in Integration Engine
    What could be the reason??? no messages are available in SXMB_MONI and RWB
    Where else can I see the messages stuck in ADAPTER Engine. I have checked the queues SMQ1 and SMQ2 both are cleared.
    Regards
    Abhishek Mahajan

    Hi Abhishek,
    Synchronous messages are not persisted on the Integration server unless logging is switched on in SXMB_ADM Tcode(Specific Configuration->RUNTIME(Category)->LOGGING_SYNC(Parameters)).
    That's the reason you couldn't find SYNCHRONOUS message in SXMB_MONI.
    Check this blog by Michal.
    /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
    Also one simple check....in the selection screen of the sxmb_moni check for the date/time range.
    Incase the receiver side you are using RFC then,
    In your RFC destination on the R/3 Side use the user "PIAPPLUSER" instead of "PIRWBUSER" in the "LOGON_SECURITY" tab.
    Regards,
    Divya

Maybe you are looking for