Email Movement When Thunderbird not Running

I am trying to use Thunderbird to move emails between two accounts (a gmail and a .edu). I have hosted both the accounts in the Thunderbird "client" and the emails of both are loaded when I open Thunderbird and login to the accounts. Thunderbird is able to copy emails from one of my email accounts and create the emails in another, which is my goal. I can then see the emails from the .edu in the gmail inbox since they have been copied. However, when Thunderbird is not running or the computer on which I have it installed is logged off/shut down, the emails stop being copied to the other email account. How can I make it so that Thunderbird will always process my rule of copying emails from the .edu to the gmail even when it is not open on any computer? Is this possible?

Figured out the best workaround. My main issue was that on my mobile device, the default mail client wasn't able to load the .edu email without forcing me to create a password for my phone lock screen. Didn't want to do that, so this meant that I could view ''Gmail only'' on my phone in the Email app. There was no way to view both inboxes as combined at once, so I wanted to find a way to get my .edu emails into Gmail continuously. I switched to the Gmail App and found that I could import the .edu account via IMAP to the app (which is more like a client than webmail) and still have the Gmail account (even though they still remain separate, you can view a combined inbox). '''I don't get why IMAP importing is enabled on the GMail app, but not the desktop webmail. And why there is no way to create filters in the GMail App like there is on both the Gmail Desktop version and Thunderbird.'''
Anyway, the world is pleading for developers to release an Android app that allows movement of emails between accounts, as none currently exist. If anyone knows of desktop webmails like Gmail that allow IMAP import, I'd like to know those also! NOTE: my .edu email had POP disabled completely.
So bottom line for all you people like me with this problem. ''Seems like the best solution currently is to use a '''client''' or '''Webmail with IMAP import''' (which I don't know any) on your desktop, and use any of the good clients for your mobile device (K-9, TypeMail, Gmail App, etc) to view all your email accounts in 1 place on both phone and PC...''
And keep dreaming of the day there's an android app that allows moving emails between accounts (already available on iOS).
Hope this helps!

Similar Messages

JFXPanel: Attempt to call defer when toolkit not running

Occaisionally receiving exception -
java.lang.IllegalStateException: Attempt to call defer when toolkit not running
     at com.sun.javafx.tk.quantum.QuantumToolkit.defer(Unknown Source)
     at com.sun.webpane.sg.prism.InvokerImpl.invokeOnEventThread(Unknown Source)
     at com.sun.webpane.webkit.network.URLLoader.callBack(Unknown Source)
Using JFXPanel with a WebView under JavaFX 2.1 and Java 1.6.0_29. Application works fine most of the time.
I believe the problem is that we have to move application panels around inside our application and I believe this is sometimes causing the JavaFX platform to believe it is shutting down when it shouldn't.
Quote from JavaFX application life-cycle definition -
"•Waits for the application to finish, which happens either when the last window has been closed, or the application calls Platform.exit()
So, the question is - is there anyway to control when JavaFX deems "the last window has been closed" ? I'm going to try the dummy application route but thought I would post here in case someone has a better/cleaner way.
Thanks.

I get a similar problem with a JFXPanel+WebView inside a ToolWindow of the MyDoggy docking framework (cf http://mydoggy.sourceforge.net/docs/mydoggyset.html)
Hiding/showing the ToolWindow eventually leads to this exception:
Exception while removing reference: java.lang.IllegalStateException: Attempt to call defer when toolkit not running
java.lang.IllegalStateException: Attempt to call defer when toolkit not running
     at com.sun.javafx.tk.quantum.QuantumToolkit.defer(QuantumToolkit.java:618)
     at com.sun.webpane.sg.prism.InvokerImpl.invokeOnEventThread(InvokerImpl.java:40)
     at com.sun.webpane.platform.Disposer$DisposerRunnable.enqueue(Disposer.java:92)
     at com.sun.webpane.platform.Disposer$DisposerRunnable.access$100(Disposer.java:76)
     at com.sun.webpane.platform.Disposer.run(Disposer.java:68)
     at java.lang.Thread.run(Thread.java:680)
Tested on OS X+JavaFX 2.2b18.
Should we open a bug for that?
Edited by: 940268 on 24 juil. 2012 14:53

HT1657 why i cant download rented movie when says not enough storage when I actually do

why i cant download rented movie when says not enough storage when I actually do

Had the exact same thing happen. Did you ever get it solved?

Turn off alarms when Ical not running! Bring it back

It seems that the option to turn off alarms when Ical not running has been removed. The only option now is to simply turn alarms off (then you forget to turn it back on!). i am a professional speaker and when an alarm rings when I'm using Keynote it knocks keynote off the screen. That is a real pain when you are speaking to 1000 people! Anyone got any ideas. And Apple, please bring it back.

I sure hope the developers at Apple as well as the management team who can make product impacting decisions are reading this thread - do they realize that this makes the *alarm function unusable by professionals* who do presentations? I was in front of a small group doing a powerpoint tonight and the alarm went off in the middle of it - not a good thing.
So, I will choose to turn them off completely at this point - it is the only option. And I am not going to manually turn them on and off - that's a ridiculous prospect.
I can only guess at the reason for removing the earlier functionality of turning off the alarms when the application was closed, but this is absolutely a requirement if alarms are to be functional at all for those of us who do presentations.

Movies disappearing from AppleTV when iTunes not running

I have synced my iTunes content to my AppleTV several times and have found that I continue to experience jerky playback of movies (AppleTV will pause to buffer data) and that the movies totally disappear from my AppleTV menu when I shut down iTunes. I believe that the movies files have been copied to AppleTV (ie I am not streaming the files). When I restart iTunes, it appears to need to re-sync only the movies with my AppleTV (music, Podcasts, and photos remain available on AppleTV while iTunes is not running). Please advise 1. why the poor flow when movie is playing on AppleTV and 2. why does it seem to need to keep re-syncing movies to the AppleTV?

Hi Drew-Bob,
iTunes should not have to re-sync your purchased movies if they transferred over correctly,
You might want to try restarting the Apple TV, or restoring it. Information on how to perform this is in knowledge base article 305190 (http://docs.info.apple.com/article.html?artnum=305190).
Cheers,
John

Restart computer when program not running

Hello,
I am using Labview 2011 and 2014.
I have set windows to launch my program when the computer is turned on. The VI is set so that the program runs when launched. Things have been working fine for several ON/OFF sequences of the computer. But last time when getting back to the screen I realised that the program was not running (just like if it was waiting for the user to press the white arrow). I pressed the white arrow and the program worked fine. I started up the computer and everything worked too. this program is suppose to run quite far away from work where I don't have access to the computer (not able to check if things are ok..)
My question is : how could I make the computer make a Stop and Start sequence if my program stops or isn't running?
Thanks.
User

User79 escreveu:
Thanks Crossrulz and Sergio for your snwers.
Sergio, I will keep in mind your solution.
Crossrultz, your solution works fine on my cpumtor where I have Seven and Labview 2014 installed. I tried it on the computer that I posted this question for and the problem is tkat windows asks me to confirm (my clicking on "ok") the closing of the windows tha are open. DO you know how I could avoid that? (the computer just shuts off on tis own wuithout antybody to confirm by clicking)
User
Maybe you can try the shutdown command with the /f option added to Crossrulz solution, resulting in:
shutdown /r /t 0 /f
Sérgio

Email only when Outlook is running

Hello newbie here, I did try to search and could not find this issue referenced.
I am on an iPhone 3G with 3.0 software. Windows XP Pro SP3 , Outlook 2007 SP2.
I am able to access my Exchange account and receive email, but only when my laptop is logged into our network and my outlook is up and running. When the PC is off, I can see email in my inbox via a webmail interface, but the email will not download to the iPhone.
I realize this is likely a server config issue, but any guidance I can provide my IT guy would be helpful (iPhone is not officially supported, so I am trying to be as helpful as I can).
Thanks in advance.

I found a different solution to this, it appears to be related to the way anti-virus handles emails prior to outlook opening, if proactive scanning is not enabled the email is only scanned for virii when outlook connects, thus the emails are not available for activesync clients until outlook has connected triggering a scan. Proactive scanning i.e scanning when the email hits the store can be enabled through a registry key change:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\VirusScan
Set ProactiveScanning = 1 (proactive scanning occurs when an item is delivered to a folder, but a request has not been made by a client)
Set ReloadNow = 1 (By default this value is set to zero, by setting this value to "1", Exchange will reload the configuration settings from the registry and reload the Vendor's DLL. Once completed this value is reset to "0" by Exchange.)

Need ical to send email notices to Thunderbird not Mail...

Hi, when I setup email notices for reminders in ical it sends them to Mail instead of sending them to Thunderbird which is my default email client. Any suggestions on how to make this happen would be great... thank you

soilsenasuil,
Have you chosen Thunderbird to be your default mail client in Mail...>Preferences...>General>Default email reader:? Also make sure that the "Send new messages from:" in Mail>Preferences...>Composing...uses the correct email address.
Additionally any accounts listed in Mail should have the Mail>Preferences...>Accounts>Advanced>"Enable this account" deselected.
;~)

Where case when query not running at all in 11.2.0.3

Hi,
I have a query that was running fine till the time we were in 11.1.0.7. Last month, we had a migration to 11.2.0.3, and the query has stopped running since then. It runs indefinitely, and finally I have to kill it. However, until 11.1.0.7, I had absolutely no problems with it. Not sure what changed in 11.2.0.3 that causes it to never give me a result. The query is as below:
SELECT T1.NAME,T2.AGE,T2.level, T2.AMT,
FROM table1 T1, table2 T2
WHERE (CASE WHEN
(T1.name = 'Peter' AND SUBSTR(T1.desc,1,15)=SUBSTR(T2.description,1,15))
THEN 1
ELSE 0
END)=1;
Please advise!
Thanks in advance.

Hi,
CrazyAnie wrote:
Hi,
I have a query that was running fine till the time we were in 11.1.0.7. Last month, we had a migration to 11.2.0.3, and the query has stopped running since then. It runs indefinitely, and finally I have to kill it. However, until 11.1.0.7, I had absolutely no problems with it. Not sure what changed in 11.2.0.3 that causes it to never give me a result. The query is as below:
SELECT T1.NAME,T2.AGE,T2.level, T2.AMT,
FROM table1 T1, table2 T2
WHERE (CASE WHEN
(T1.name = 'Peter' AND SUBSTR(T1.desc,1,15)=SUBSTR(T2.description,1,15))
THEN 1
ELSE 0
END)=1;
Please advise!I'm surprised it runs in any version. You have a comma right before the keyword FROM. If you were not getting a compile-time error, that was a bug in 11.1.0.7 that they fixed by 11.2.0.3.
It's still strange that the query runs for a long time. I would expect it to give you an error when you tried to compile it. Is there any chance that what you posted is not what you're actually running?
Also, LEVEL, NAME and DESC are not good column names. How Oracle reacts to using keywords like that as column names can vary from version to version. If a word is in v$reserved_words.keyword, then it's best to avoid using it as a column (or table, or variable, or schema) name.
Edited by: Frank Kulash on Nov 21, 2012 1:33 PM
By the way, that WHERE clause is a lot more complicated than it needs to be. Why not use
WHERE      t1.name = 'Peter'
AND      SUBSTR ( t1."DESC"     -- If you must use DESC, double-quote it
            , 1
            , 15
            ) = SUBSTR ( t2.description
                           , 1
                 , 15
                 )? Always think carefully before using CASE in a WHERE (or HAVING, or START WITH, or CONNECT BY) clause.

Msiexec /qn fails when its not run using the built-in local administrator account

Hello all,
I am working on a project where I am trying to automate the deployment of VMs through a self-service portal.
Among other tasks such as clone VM, sysprep it, assign an IP, create AD computer object, join VM to domain and so on..., i need to install a few applications using msiexec, which is driving me crazy...
For this purpose, I am using a local user account part of the administrators group.
Please note, UAC is disabled on all the OS.
Basically, the msi installation works as expected on Windows 7 machines, however on Windows 8/2012, it fails due to lack of permissions. The curious thing is that if I use the built-in\administrator account instead for the deployment on those systems, the
application is installed correctly.
I have tested some things such as: DisableMSI (http://msdn.microsoft.com/en-us/library/aa368304%28v=vs.85%29.aspx), but although it progresses a bit further, it keeps failing.
Does anyone know what I can do to allow an user part of the administrators local group to be able to install using msiexec /qn?
Thanks in advance.

Hi,
Does it work if you use the account in local admin, and run the commands prompt as administrator to install the msi file? Please know that Only the built in administrator account has admin privilege by default. On other admin accounts you need
to run with elevated privilege (ie runas).
I would like to know if you use SCCM to perform your deployment with task sequence.
As I known, even if you disable UAC, the following policy is still enabled to detect application installation.
Computer configuration\Windows settings\Security Settings\Local
Policies\Security Options -> User Account Control: Detect application installations and prompt for elevation policy
Please disable this policy to see if your issue can be fixed.
Kate Li
TechNet Community Support

Video icon in buddy list does not display when iChat not running?

I have my father-in-law's computer setup to automatically log into iChat when he turns on the computer. However, it does not say he can video chat (the icon does not display) until he actually opens iChat. Is there any way around this? The only thing I thought of was to get iChat to open at login and just not display the buddy list.
Basically, I want him to be available to video chat with his grand daughter...but he doesn't need to see the buddy list or the app for that matter. She would initiate all chats.
Thanks
Brian

I am trying to imagine what you have done here.
It is possible to have iChat as a Login Item.
It is possible for iChat to start Up with the Buddy Lists hidden.
From there Chats can be started from the File menu or Apple key and N together.
To do it this way you have to know the Screen Name of who you are calling.
You should be able to accept incoming A/V chats.
9:46 PM Thursday; January 10, 2008

[SOLVED] PKGBUILD for a font - xset fails when X not running

I am working on my second PKGBUILD -- this time for a simple raster font I use. The PKGBUILD uses a post_install() which does an "xset -fp rehash" after installing the font files, because it seemed like otherwise the font wouldn't show up in X. Then in tests I found that the install died with errors when I installed my package without X running. How is this situation normally handled?
Last edited by scottfial (2010-07-09 08:04:21)

xset will fail if X isn't running. Font packages generally have an install file like this:
# arg 1: the new package version
post_install() {
echo -n "Updating font cache... "
fc-cache -f > /dev/null
mkfontscale /usr/share/fonts/local
mkfontdir /usr/share/fonts/local
echo "done."
# # arg 1: the new package version
# # arg 2: the old package version
post_upgrade() {
post_install $1
# # arg 1: the old package version
post_remove() {
post_install $1
The user can then either run xset manually or logout/login after installation.

Flash swf not running properly in captivate

Hi,
I'm not sure if this is a flash question or a captivate question so I'm posting it to both forums. I have numerous flash cs5 built swfs inserted into a captivate 5 project. All of them are running fine apart from this one. It runs perfectly outside of captivate but within the captivate swf it goes haywire. It's a very simple fla. The only actionscript involved is a stop action. There is a movie clip that uses a number of classic tweens and then there is a layer containing textual explanations for what's happening in the movie clip. When I run my captivate project the swf does one or other of the following:
a) it runs but the movie clip starts earlier than the text and so they are out of synch
b) the text runs as normal but the movie clip does not run at all
c) it only shows the final frame of the swf and nothing else happens.
As I say, it is a very simple fla and I'm at my wits end trying to figure out what's wrong. I don't seem to be able to attach the fla here, so if anybody thinks they may be able to help please pm me with your email address and I will email you the fla file.
Just to note some of the things I have already considered: the text is all set to classic rather than TLF. The captivate project and the fla both publish as3 at 12fps for flash player 9.
yours hopefully!
Maedhbh

See http://forums.adobe.com/message/3327323. I am having the same problem and this may help you out.

Flash cs5 swf not running properly in captivate 5

Hi,
I'm not sure if this is a flash question or a captivate question so I'm posting it to both forums. I have numerous flash cs5 built swfs inserted into a captivate 5 project. All of them are running fine apart from this one. It runs perfectly outside of captivate but within the captivate swf it goes haywire. It's a very simple fla. The only actionscript involved is a stop action. There is a movie clip that uses a number of classic tweens and then there is a layer containing textual explanations for what's happening in the movie clip. When I run my captivate project the swf does one or other of the following:
a) it runs but the movie clip starts earlier than the text and so they are out of synch
b) the text runs as normal but the movie clip does not run at all
c) it only shows the final frame of the swf and nothing else happens.
As I say, it is a very simple fla and I'm at my wits end trying to figure out what's wrong. I don't seem to be able to attach the fla here, so if anybody thinks they may be able to help please pm me with your email address and I will email you the fla file.
Just to note some of the things I have already considered: the text is all set to classic rather than TLF. The captivate project and the fla both publish as3 at 12fps for flash player 9.
yours hopefully!
Maedhbh

See http://forums.adobe.com/message/3327323. I am having the same problem and this may help you out.

I used to shoot video in my Powershot S3 IS (MVI_.AVI) and load it into iPhoto, I used quicktime pro so I could convert it for emailing to family members. That was when I was running Leopard now with Mt. Lion nothing works. Videos do not open at all?

I used to shoot video in my Powershot S3 IS (Format MVI_.AVI) and load them into iPhoto, I used quicktime pro so I could convert for emailing to family members. That was when I was running Leopard now with Mt. Lion nothing works. Videos do not open at all. Any simple suggestions, I am not real keen on iMovie Productions and not real certain how they compress for emailing attachments. Something simple here that I am missing? Thanks so much. I am a grandpa trying to share with family members far away (quickly & simply).

I am surprised that Apple did not build a converter into Mt. Lion.
Apple does have a converter built into Mountain Lion. It is call "Quicktime." However, in order to use this converter, you must first make sure the compression formats are playback compatible with QT. Basically, there are three levels of QT compatibility. The lowest is "Playback." These file can be played by QT but may not be conversion or edit compatible with QT. The second level is QT "Conversion" compatible. These files are playback compatible and can be converted to other compression formats using QT. "Edit" compatible media files are "Fully" compatible with QT since the can be played, converted and/or edited by QT. The main problem here is that AVI is a "legacy" file format that has not been officially supported by Microsoft for more than 11 years when it was replaced by Windows Media multimedia file/compression formats. Many of the original compression formats used in AVI files have never been transcoded for the Mac platform, use beyond system 9, or use beyond PPC platforms. In addition, some commonly used AVI codecs are proprietary or use non-standard (hybrid) profile and level combinations. In short, there is little wonder that Apple has been distancing itself from this outdated file type as it re-writes and upgrades its own QT structure to support more standardized, more scalable, more modern high definition file types and compression formats. It is really unfortunate that users continue to use this outmoded file type simply because it is freely available, easy to use, or they are simply too lazy to move on to a more modern or more efficient file types and/or compression formats.
I tested Wondershare Video Converter Ultimate for the Mac, which seems to be the "state of the art". I may be purchasing a new camera which might create a whole new set of variables. This program seems to cover all bases and is great for novices.
There are many third-party apps available if you wish to search for them. Many are even available in the App Store. Most do their job well and it is usually a matter of personal user preference as to which is best.
HandBrake seems more suited to folks with more experience and knowledge.
I mentioned Handbrake primarily because it is free and easy to use when you employ the included conversion presets options. (The TV options can normally be used for almost any situation depending on the source file and output requirements.) It is also excellent for more experienced users, but has a somewhat limited choice of output options as it does not access the user's system QT codec component configuration.

Email Movement When Thunderbird not Running

Similar Messages

Maybe you are looking for