Email not connecting with the server
How do you fix this?
Hey gmoney60,
I would take a look at the troubleshooting steps in the following article, it should help with getting your email back up and running on your iPad:
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Welcome to Apple Support Communities!
Have a good one,
Delgadoh
Similar Messages
-
i bought itunes match yesterday and i can not connect with the server. Error 4010 appear every tiem when i want to entry on itunes match.
ThanksHere are some things to try:
Close itunes
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again
And, you don't need to turn off the firewall, just add itunes and itunes helper to your security software firewall. -
I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac -
Since 29/10/2012 my iphone 4s and more recently my ipad 3 will not connect to the server when trying to access my email account. All I get is an error message saying that 'cannot get mail, connection to the server failed' I hadnt changed any settings it just happened. I have since done a complete re-boot on the ipad but to no avail. Anybody got any suggestions?
No. Everything was working fine and then it wasn't. I hadn't changed any settings or switched either one off. When the phone stopped working properly I ignored it because I always have my ipad with me but that just sopped working properly and now I am stuffed. I have tried most solutions suggested on here even wiping the ipad clean and re-booting. I did this exactly the same way as when I first got it but still no joy. The same with the phone.
-
Since updating to iso6.0 I have had problems with my email exchange account syncing correctly - I keeps loosing connection with the server.
Are you losing the connection to iTunes on the iPad or the computer? You are saying that iTunes is updated. Of course iTunes is updated when you update the iOS software. That's a no brainer.
If you mean that iTunes is updated on the computer, that has absolutely nothing whatsoever to do with downloading and updating apps on the iPad itself so changing the date on the iPad, signing in and out of the stores on the iPad .... Doing any of that on the iPad would have nothing to do with iTunes on your computer.
If .... you have not been able to connect to the iTunes or app stores at all on the iPad - try this ...
Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If you can't connect at all - you can also try rebooting your router. Unplug it from power for about 30 seconds and then plug it in again. -
I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it. -
Documents not Opening, No connectivity with the server
Morning,
Strange problem we are encountering that seems to be with a specific image build we have of Windows 7 Enterprise x64, with and without Service Pack 1 using IE8 x32 and Office 2010 x64. When we try to open Word, Excel, or specifically PowerPoint documents
on our new SharePoint 2010 server we get the following error: No connectivity with the server.
Here is a JPG of the error message:
http://www.gofsj.com/fsj/uploads/caa612c339cccaf12448e34a65c83d7d_erroropeningdocument.jpg
A "normal" install of Windows 7 Enterprise x64, with no custom configuration (but getting the domain group policies) can view the files on SharePoint 2010, no problems. Unfortunately, we've already deployed the "odd" image out to 50+
machines.
We have tried resetting Internet Explorer, uninstalling Office 2010 x64 and installing Office 2010 x32 with no luck.
What is really going on? Is it a SharePoint plugin that isn't installed? Is it Internet Explorer isn't configured correctly, or has DLLs that aren't registered? Or something with Office 2010? Is there a way to capture more than this
Error Message? This is what pretty much stamps in the Event Viewer too...This may be related to the Network and Sharing Center stating the computer is not connected to any network, and the Windows Firewall stating it is on a Public Network. Even though the machine is connected and running on the LAN.
I added SERVICE with full control (and pushed it down to registry subkeys) on HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList. Then I Enabled/Disabled the LAN Adapter. Could also reboot, or physically unplug the cable. Not
sure if restarting a specific service would accomplish the same thing or not.
In the Network and Sharing Center it came up as on the domain. Windows Firewall came up as being on a Domain. And I was able to open PowerPoint and Excel documents on the SharePoint site.
So for now, looks like this is fixed. -
The MOF Compiler could not connect with the WMI server
I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
SQL 2012 installation Error-The MOF compiler could not connect with the WMI server
Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil -
I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Configuring OS X Server 3.1.2 : server.app fails with "Could Not Connect to the Server"
Hi All,
I am trying to install OS X Server using server.app 3.1.2. but after installation when i try to connect it is giving "Could Not Connect to the Server" error. is there any way to find out the logs or debug this problem. Since the error isn't giving any indication of the reason of the failure.Hi Linc,
Thanks for you prompt reply, below are the logs....
9/15/14 7:56:58.229 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:57:28.287 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:57:58.315 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:58:24.653 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 7:58:28.379 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:58:58.428 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:59:13.752 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 7:59:28.496 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 7:59:58.568 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:00:06.460 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:00:16.854 AM Console[369]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
9/15/14 8:00:28.567 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:00:58.623 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:16.101 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:01:28.668 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:53.596 AM WindowServer[95]: CGXGetConnectionProperty: Invalid connection 42003
9/15/14 8:01:53.752 AM ocspd[84]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7fa6c9e102a0> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:01:53.954 AM com.apple.serveralertproxy[386]: ApplePushService: APSConnection being used without a delegate queue
9/15/14 8:01:58.666 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:02:14.303 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:02:28.669 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:02:58.697 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:03:10.186 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:03:28.699 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:03:58.726 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid)
9/15/14 8:04:06.022 AM netbiosd[125]: findReachableAddress: Using port 139 family = 33
9/15/14 8:04:28.782 AM apsd[250]: SecOSStatusWith error:[-25291] The operation couldn’t be completed. (com.apple.security.xpc error 3 - <connection: 0x7ffb9960a330> { name = com.apple.securityd.xpc, listener = false, pid = 0, euid = 4294967295, egid = 4294967295, asid = 4294967295 }: Connection invalid) -
Acrobat can not connect with the email program, what can I do?
Acrobat can not connect with the email program, what can I do?
Hello,
I'm sorry you're having trouble; unfortunately, I'm not sure I understand what's going wrong. Would you mind giving me more details about what you're trying to do and what the problem appears to be?
Just in case you're using the desktop version of Acrobat and not Acrobat.com (which is the forum to which you posted your question), here's a link to their forum so you can repost your question there:
http://forums.adobe.com/community/acrobat
Thank you! -
I cannot get email and the message says the device is not connected to the server
I cannot get email and the message says the device is not connected to the server. How can I resolve this issue?
Hey there Chen_erping,
Thank you for asking your question! It sounds like you are unable to send or recieve email from the account you setup in the Mail app on your iPad. I want to recommend the troubleshooting steps outlined in the following article:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I tried to send an email but it said I was not connected to the server. I also cannot open a new email
I use hotmail. I went to hotmail sign in on the Internet and retrieved my email without any problem. I checked my settings and they are correct
Maybe you are looking for
-
trying to hook up preowned airpoirt extreme. asking for password for selected wireless device. would there be a password from previous owner?
-
Let's talk motherboard and CPU in simple English please-
I am a home enthusiast/student (signed up with a popular web site) that loves all things Adobe. I have the Master Suite. I love Premiere Pro (can't wait to learn After Effects). I have a consumer-grade AVCHD video camera from a 'big box store'. I don
-
Buying an app as a gift for a friend
I just got an IPod and a friend has an IPhone. She recently mentioned wanting to get a birding app for her phone. I was wondering, is there any way I can purchase this as a gift for her(I assume with my account)? Best, David
-
Circular references between stored procedures
Hi, i need help about circular references. I have two stored procedures that references like that: create or replace procedure ciclico2 as begin ciclico1; end; create or replace procedure ciclico1 as begin ciclico2; end; I can't compile both... so i
-
Fail to deploy DWG TrueView 2013 by SCCM 2012
I am using SCCM 2012 to deploy DWGTrueView 2013 in two ways: 1.application. For WinXP, I deploy it success when I login by administrator. it returns me an error of 1603 when I login by domain users. For Win7, it works for domain users. 2.package. I t