Email not set correctly

I am trying to provision users to Pioneer. I have a rule that generates the e-mail from the user as [email protected] I am trying to do this in our development environment. When I put a trace statement around the rule I can see the correct e-mail being generated. However when I look at the email attribute on ATTRIBUTES tab on Edit User screen in SIM I see an email as [email protected] Any ideas why?
Thanks

How do you set a multivalued field in AD thru SIM. I tried the code below to populate proxyaddresses field in AD
<set name ='userView.accounts[AD].proxyAddresses'>
<filterdup>
<filternull>
<append>
<concat>
<s>SMTP:</s>
<s>[email protected]</s>
</concat>
</append>
</filternull>
</filterdup>
</set>Above did not work. In the field in SIM mapped to proxyaddresses I see proxyaddresses from AD but not the one I am trying set in the code above.
If you can give an example of code to do this in Workflow I would appreciate it.
Thank you in advance
Message was edited by:
NikhiMahadkar

Similar Messages

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

BKI0008E: The environment variable BI_CALLER is not set correctely. The cur

Hi All,
I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
Now when i try to run the backup using the pipe am getting the above mentioned error.
Please find below the dbm.ebp log for the same...
more dbm.ebp
2009-10-22 02:06:08
Setting environment variable 'TEMP' for the directory for temporary files and pi
pes to default ''.
Setting environment variable 'TMP' for the directory for temporary files and pip
es to default ''.
Using connection to Backint for MaxDB Interface.
2009-10-22 02:06:08
Checking existence and configuration of Backint for MaxDB.
    Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
as path of the configuration file of Backint for MaxDB.
    Setting environment variable 'BSI_ENV' for the path of the configuration fil
e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
    Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
as.env'.
        Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
        Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
        Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
        Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
        Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
        Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
        Found keyword 'TIMEOUT_FAILURE' with value '1800'.
    Finished reading of the Backint for MaxDB configuration file.
    Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
    Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
    Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
    Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
B.
    Using '1800' seconds as timeout for Backint for MaxDB in the case of success
    Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
    Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
te.
    Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
to migrate.
    Checking availability of backups using backint's inquire function.
Check passed successful.
2009-10-22 02:06:08
Checking medium.
Check passed successfully.
2009-10-22 02:06:08
Preparing backup.
    Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
    Setting environment variable 'BI_REQUEST' to value 'NEW'.
    Setting environment variable 'BI_BACKUP' to value 'FULL'.
    Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
    Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
MaxDB.
    Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
nt for MaxDB.
    Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
    Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
Prepare passed successfully.
2009-10-22 02:06:08
Creating pipes for data transfer.
    Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
    Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
All data transfer pipes have been created.
2009-10-22 02:06:08
Starting database action for the backup.
    Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
db-kernel.
The database is working on the request.
2009-10-22 02:06:09
Waiting until database has prepared the backup.
    Asking for state of database.
    2009-10-22 02:06:09 Database is still preparing the backup.
    Waiting 1 second ... Done.
    Asking for state of database.
    2009-10-22 02:06:10 Database is still preparing the backup.
    Waiting 2 seconds ... Done.
    Asking for state of database.
    2009-10-22 02:06:12 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2009-10-22 02:06:12
Starting Backint for MaxDB.
    Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
    Process was started successfully.
Backint for MaxDB has been started successfully.
2009-10-22 02:06:12
Waiting for end of the backup operation.
    2009-10-22 02:06:12 The backup tool is running.
    2009-10-22 02:06:12 The database is working on the request.
    2009-10-22 02:06:14 The backup tool process has finished work with return co
de 2.
    2009-10-22 02:06:17 The database is working on the request.
    2009-10-22 02:06:27 The database is working on the request.
    2009-10-22 02:06:42 The database is working on the request.
    2009-10-22 02:07:02 The database is working on the request.
    2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
psed ... OK.
    2009-10-22 02:07:17 The database has finished work on the request.
    Receiving a reply from the database kernel.
    Got the following reply from db-kernel:
        SQL-Code              :-903
The backup operation has ended.
2009-10-22 02:07:17
Filling reply buffer.
    Have encountered error -24920:
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
    Constructed the following reply:
        ERR
        -24920,ERR_BACKUPOP: backup operation was unsuccessful
        The backup tool failed with 2 as sum of exit codes. The database request
was canceled and ended with error -903.
Reply buffer filled.
2009-10-22 02:07:17
Cleaning up.
    Removing data transfer pipes.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
        Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
    Removed data transfer pipes successfully.
    Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
                                 Data Protection for mySAP(R)
                     Interface between BR*Tools and Tivoli Storage Manager
                     - Version 5, Release 4, Modification 0.0 for Linux x86_64
                           Build: 303 compiled on Nov 16 2006
                (c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
        BKI0008E: The environment variable BI_CALLER is not set correctely. The
current value is "DBMSRV"
        usage:
         backint -p <par_file> [-u <user_id>] [-f <function>]
                [-t <type>] [-i <in_file>] [-o <out_file>] [-c]
        where:
               <user_id>    backint utility user
               <function>   backup | restore | inquire | password | delete
               <type>       file | file_online
               <par_file>   parameter file for backup utility
               <in_file>    name of a text file that defines the objects
                            default: STDIN
               <out_file>   Pool for processing messages and the results
                            of the executed function.
                            default: STOUT
        BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
        BKI0021I: Elapsed time: 01 sec .
        BKI0024I: Return code is: 2.
End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
    Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
    Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
.err)----
End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
rr)----
    Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
FC.err'.
    Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
Have finished clean up successfully.

Also, is there any specification about the user permissions and about how the backup should be run?

MFL: The dependency is not configured in schema resource. Possible reason one or more import/include is not set   correctly.

HI Friends,
I have a created a MFL to transform XML to Non XML format. When am generating a XSD out of this MFL am getting this Error:
The dependency is not configured in schema resource. Possible reason one or more import/include is not set
correctly.
Here is the snippet of the XSD:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
          xmlns="http://www.w3.org/2001/XMLSchema"
          targetNamespace=""
          xmlns:mfl="http://www.bea.com/mfl"
          elementFormDefault="qualified">
    <xsd:import namespace="http://www.bea.com/mfl"/>........
Later Part i have searched for mfl.xsd in com.bea.wli.core.mflengine_1.x.x.x.jar in my.........../Oracle_OSB1/modules and imorted this XSD into my eclipse workspace.
Then i added the schemalocation attribute to the Import element. which looks something like below:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
          xmlns="http://www.w3.org/2001/XMLSchema"
          targetNamespace=""
          xmlns:mfl="http://www.bea.com/mfl"
          elementFormDefault="qualified">
    <xsd:import namespace="http://www.bea.com/mfl" schemaLocation="../../mfl.xsd" />......
After doing these changes also am getting the same error... can anyone help me out of this????

Hi Arun,
Also in SB console we can refer xsds from other projects but again OEPE doesnt seem to support that we will have to make duplicate copies of the resources in each project.It is not like that if you are using OEPE then you can not refer resources from other projects. Just what you need to do is that give relative path of the resource which is there in the file system. It does not matter that to which project it belongs. Yes, now with OEPE, you have to do this manually.
Regards,
Anuj

RequestCenter emails not rendering correctly in Outlook 2007

RequestCenter emails not rendering correctly in Outlook 2007
I'm having an problem where the RequestCenter automated emails are losing most of their HTML formatting when viewed in Outlook 2007. When I look at the same email in Outlook 2003, the HTML formatting is fine. Here's a picture of the same email displayed in Outlook 2003 and 2007:
When I view the source HTML of the email, I noticed that there are duplicate HTML, HEAD, and BODY tags that have been automatically added by RequestCenter. Apparently these extra tags are ignored by Outlook 2003, but cause problems with Outlook 2007.
This picture shows the HTML source in RequestCenter's HTML editor compared to the HTML source from within Outlook with the extra tags.
I tried removing the HTML, HEAD, and BODY tags in the HTML editor, but the editor puts the tags back in when you save it.
Does anyone know how to fix this?
Thanks,
Scott

We've actually had the same problem and had opened a ticket with customer care - it's the editor that's in the version we have (or had, since we are going through the upgrade). What we've had to do is embed xml tags in the body of the email too, and then the team that processes the email has a little application that will process the data in the tags and strip the HTML that the editor applies. Not much help, I know.
I've heard a rumor that the issue is fixed in 2007 with the new text editor - I'

Profile parameter icm/host_name_full is not set correctly

Hi All,
I am working on Solution Manager 4.0. When I execute TCODE "SOLUTION_MANAGER", it gives the following error:
Profile parameter icm/host_name_full is not set correctly (see long text)
When I click on "Long Text", it gives me the following message widow:
Message Number: SOL_GRAPHIC002
Diagnosis
The graphic cannot be displayed, since the profile parameter icm/host_name_full is not set correctly.
Procedure
Set the profile parameter icm/host_name_full correctly.
For more information, see SAP Notes 434918 and 677118.
I have referred to both the notes above. In note# 434918, it says that I need latest kernel patch (which is 150).Also the icm/host_name_full parameter parameter was not there in Solution Manager, so I created in the following manner:
Parameter Name =icm/host_name_full
Parameter Value=smgdcs1s.example.com
But however, the error continues to be the same.
Kindly help me asap.
Thanks in advance.
Regards,
Faisal

Hi Markus,
Earlier the profile was activated and server was also restarted. However, it was not efffective.
Now once again i have activated the profile and restared the server. Now I am able to see the profile and it value in
RZ10
RZ11
Thanks a alot for your valuable inputs
Thanks and Regards,
Faisal

Error: property is not set correctly for User Defined Fields.

Hi Gurus,
I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
Thanks,
sat

Hi Kevin,
I couldnt get it done. This is what I had done so far.
Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
Added two field in xlwebadmin.properties & xlwebadmin_en.properties
lookupfield.header.users.deptcode=Department code
lookupfield.header.users.deptname=Department name
In my lookfield properties in
column caption=Department code,Department name
Column query= Not sure what to give? here
Thanks,
sat

User mapping is not set correctly..!

Dear Guru,
I am working with portal 6.0 SP9, and when I try of create user, the application return "Could not create user" and I am use the user j2ee_admin. This user have admin role
I think that the user mapping is not set correctly or the permission is not correct.
The questions is: How can I user mapping set correctly?
Thanks
Dy

Hi Dayana,
Maybe the user name is shorter than 5 characters?
Yoav

"ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly

Hi,
I have a SSIS package named FlushFeed4Data that copy data from a table named TableA in a database named DatabaseA located on SQL server 2005 named SQL2005 to another table named Table B in a database named DatabaseB located on a server 2012 named SQL2012.
The server SQL2005 is setup like a linked server in the server 2012. My package runs smootly: first it removes all old records in SQL2012.DatabaseB.TableB & then copy all records from SQL2005.DatabaseA.TableA to SQL2012.DatabaseB.TableB to without
any error message. It runs well both when I ran debugging in SQL Server Data Tools (Microsoft Visual Studio) & when I executed this package in SSIS of server SQL2012. However when I use a job named FlushFeed4Data to run this package, I've got error message:
Executed as user NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64 bitCopyright (C) Microsoft Corporation. Code: 0xC002F210. Source: Insert Data Execute SQL Task. Dexcription: Executing the query "Insert
Into SQL2012.B.[dbo].TableB ..." failed with the following error: "Login failed for user '[MyCompanyDomainName]\SQL2012$' ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
set correctly, or connection not established correctly. End Error DTExec: The package execution returned DTSER_FAILURE (1) ... The package execution failed. The step failed.
Please help!
Thanks
Edward

Hi Athur,
Thanks so much for your reply. I'd really appreciate about that. Following the article given by your link, I got error message when trying to create proxy
sg 14529, Level 16, State 1, Procedure sp_add_proxy, Line 45
Proxy "MyCompanyDomainName\SSISProxyDemoUser" is not a valid Windows user.
USE msdb
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = ',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
So I have a question: Do I have to create a new user account that can access our network named
PS: Below are the steps I followed the article:
--Script #1 - Creating a credential to be used by proxy
USE MASTER
GO
--Drop the credential if it is already existing
IF EXISTS (SELECT 1 FROM sys.credentials WHERE name = N'SSISProxyCredentials')
BEGIN
DROP CREDENTIAL [SSISProxyCredentials]
END
GO
CREATE CREDENTIAL [SSISProxyCredentials]
WITH IDENTITY = N'MyCompanyDomainName\SSISProxyDemoUser',
SECRET = N'abcd@0987'
GO
--Script #2 - Creating a proxy account
USE msdb
GO
--Drop the proxy if it is already existing
IF EXISTS (SELECT 1 FROM msdb.dbo.sysproxies WHERE name = N'SSISProxyDemo')
BEGIN
EXEC dbo.sp_delete_proxy
@proxy_name = N'SSISProxyDemo'
END
GO
and the rest of the script 2 hasn't been proceeded due to error:
--Create a proxy and use the same credential as created above
EXEC msdb.dbo.sp_add_proxy
@proxy_name = N'SSISProxyDemo',
@credential_name=N'SSISProxyCredentials',
@enabled=1
GO
--To enable or disable you can use this command
EXEC msdb.dbo.sp_update_proxy
@proxy_name = N'SSISProxyDemo',
@enabled = 1 --@enabled
= 0
GO
Please advise me!
Thanks,Edward

: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Hi   .
    I was creating the pass the values t in temp tables though s sis package vs2012 .
  First I was taken on executive SQL TASK.
IN EXCUTIVE SQL TASK . I was write the stored proce:
Sp;
reate procedure USP_GETEMP2333
AS
begin
Select eid,ename,dept,salary from emp
end;
create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
insert into #temp
   exec USP_GETMP02333
   go.
It was executive correctly.
I was taken another sequence container. In the sequence container iam creating one   executive sql
In 2<sup>nd</sup> excutive sql task: sql statements is
if object_id('emp_fact_sal') is not null
drop table emp_fact_sal
select eid,ename as emp_name,sal_bar=
case when salary<=5000 then 'l'
when salary >5000 and salary<=7000 then 'm'
else
'h'
end
into emp_fact_sal from #temp.
and one falt flies it was taken to designation .
iam changing all connection properties:
in oldeb connection:
in excutive sal task properties .
delay validation is true,
and retain connection maner is also true,
and package mode is 64 bit is false.
But iwas excutive in 2<sup>nd</sup> excutive ql task .
Iam getting this type of errors,
                [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
correctly.
Please help me

Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
is an undocumented behavior and should not be relied upon.

HTML Email not rendering correctly

Hi,
Since upgrading to Mountain Lion I've noticed that a number of my HTML based incoming emails are not translating correctly - the text is just showing as graphic characters. None HTML emails are fine - anyone got any ideas?
Regards
Neil

Hi Scott.
In order to solve your problem with relative links to image and css files inside KM I suggest two variants:
1. Replace relative links as I mentioned in this message Re: JavaScript and CSS info in WPC.
2.The second solution is:
a. Create an blank html file inside KM folder where the base.html file is stored.
b. Download the newly created file for local editing.
c. Place an iframe that points to your base html file between <BODY></BODY> tags. Use a following code as an example:
<iframe width="100%" height="100%" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="base.html"></iframe>
d. Upload this file back to KM.
e. Point your KM Document iView to the created html file.
Best regards,
Aliaksandr Zhukau
Edited by: Aliaksandr Zhukau on Dec 3, 2009 11:04 AM

Email not displaying correctly

Hello, sometimes my incoming or outcoming emails are not displaying correctly. They look like code, then i selectanother email and then select back the message and disolays perfect.
Some people told me my emails werenot displaying normal.
Something wromg with the iphone os 3.1.3?

Some people told me my emails werenot displaying normal.
For anyone to help, you would need to provide details about what language you were using and exactly what was being used at the other end to read your emails, and exactly what was not "normal" about their display. When you have that, best to tell Apple here, since there is little you can do yourself to change how Mail behaves.
http://www.apple.com/feedback/ipad.html

AD attributes and passwords not setting correctly

I am running FIM 2010 R2 build 4.1.3479.0 with AD servers at 2008 forest level. I have set up the ADMA for staff to set passwords and the userprincipalname attribute (among others). I have custom code in the MVextension.dll that does this. I
am having two issues going on that I believe to be related somehow.
1) These initial passwords are not being set and
2) although the userprinciplename attribute is set correctly when you look in ADUC on the "Attribute Editor" tab, it is not being displayed correctly on the "Account" tab. The User logon name and the upnsuffix fields are blank.
The pre-win2k fields are displaying correctly.
I have done a lot of work trying to figure out what is going on here and I have checked that there are no issues with rights in AD and the code. I have another ADMA that populates a different set of users in another OU and that fills out the UPN and
password and everything works as it should. The code differences between the two areas are very minimal.
The code for this is as follows:
csentry["userPrincipalName"].StringValue = mventry["accountName"].StringValue + emailExtension;
if (mventry["user_InitialPassword"].IsPresent)
csentry["unicodePwd"].StringValue = mventry["user_InitialPassword"].StringValue; // defaultPassword;
else
csentry["unicodePwd"].StringValue = Custom_Extensions.Custom_Extensions.GenerateRandomPassword();
Any ideas what to look at to try and figure out what the heck is going on would be really helpful please!
Thanks
Erica

There are no errors on creation of the user. There are no errors if I log in as the service account and try to change the password.
The emailExtension variable is the same as the one that works for the other users that work.

Push email not working correctly

I have a z10 with .2141 installed on att. I had the email sync set to 1 hour but decided I wanted to push these two account I have. One is an exchange account and the other is outlook.com. I switched them both to push and they appear to partially work. If I read an email on my computer through outlook, the phone will show it as read almost instantly. However if I delete or move an email in outlook, it's not deleting or moving on the phone unless I refresh the hub. If I move or delete from phone, outlook is not showing the change either unless I manually refresh the hub. This is a fairly brand new install of 2141. Everything else appears to be working ok but push. I have restarted and pulled the battery. I have tried this with wifi on and wifi off, with same results.
Any ideas?

I guess I should have read your OP better. I have both of those, as well. With Outlook.com sometimes the syncs are slow but most of the time they are immediate. I don't know what causes the occasional delay but overall it works very well.
Are these accounts restored from a backup or added back fresh after the update?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

IV_REVERT not set correctly

Hello,
let's assume the following scenario (two UIBBs - > A and B):
1. UIBB A executes process_event with failure and sets ev_result to 'FAILED'
2. UIBB B process_event is not executed
3. AFTER_FAILED_EVENT is executed
a) first in UIBB A (iv_revert = '')
b) then in UIBB B ( iv_revert = 'X')
This seems to be fine. Now the failure is in UIBB B:
1. UIBB A executes process_event successfully
2. UIBB B has failed and sets ev_result to 'FAILED'.
3. AFTER_FAILED_EVENT is executed
a) first in UIBB A (iv_revert is false)
b) then in UIBB B ( iv_revert is false)
I'd assume that iv_revert is set to 'X' for UIBB A, but it isn't.
Any opinion on that (system 700 SP18)?
Thanks and regards,
Ulli

I will try setting them both to RTC, right now they are both set to local, here's a copy of my rc.conf, and (kind of hazy on details) had setup to start the hwclock daemon and it would sync them both (did remove this but time is still way off), idk read that on a forum somewhere, unfortunately it would sync but both times would be wrong after this. Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="localtime"
TIMEZONE="America/Denver"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
LOCALE=
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=()
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME=Darkstar
interface=
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
DAEMONS=(syslog-ng !network crond dbus wicd)
***UPDATE*** Okay so setting to RTC didn't dp anything, did manage to fix the hardware clock being off somehow the BIOS setting had changed however the System clock now won't sync with the Hardware clock, I do hwclock -s and it syncs fine but as soon as I reboot it's off again. It's exactly six hours off right now so I would imagine it would be some sort of time zone setting but the time zone is set correctly to mountain time
Last edited by kc3 (2012-04-11 16:55:14)

Email not set correctly

Similar Messages

Maybe you are looking for