Email not working after upgrading to 7.0.3

I've upgraded my iPad OS to 7.0.3 and immediately after I did that, my email account stopped working. It says to verify that I have entered the correct account info in Mail settings but I had not changed any of that prior to upgrading. I've tried deleting the account and adding it back, I've tried shutting down and rebooting iPad and I just keep getting the same errors.
When I try to add again, it gives me this:
The SMTP server is not responding. Check your network connection and that you entered the correct information in the Outgoing Mail Server field.
When I try to save, it says Cannot Connect Using SSL and do I want to try connecting without it. WHen I say yes, then it tells me that I need to check that I've entered the correct information in the Incoming Mail Server field.
Any ideas as to what's going on?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Similar Messages

  • One yahoo email not working after upgrade

    one yahoo mail account is not working after upgrade, have touched nothing, and cannot seem to delete it either.
    Was hoping to delete it and then add it.

    ok, I figured this out, go to accounts box, then hit the minus sign.  Nothing I read had mentioned this.

  • Emailing not working after upgrade from 3 to 4.1

    We have emails going from apex applications that we sending emails to outlook.
    After upgrade to 4.1 they don't send emails as they used to do in version 3.
    System admin verified and all configurations look good..
    Anyone has similar experience
    Appreciate any feedback
    Kp

    Hi Kp,
    please provide more information:
    *) Oracle DB version (has this changed due to the upgrade)?
    *) Which Oracle user is used to send the emails?
    *) Are you sending the emails through an application process or through a background job?
    Please post the exact code you are using.
    Which version 3 are you talking about, 3.0, 3.1 or 3.2?
    Please be as specific as you can be and provide as much context information as possible. I recall that there has been a change in the security settings, especially for mail, don't remember exactly which version, though.
    Do you get any error messages?
    SELECT *
      FROM apex_mail_queue
    WHERE mail_send_error IS NOT NULL;Cheers,
    ~Dietmar.

  • IPad 2 email not working after upgrade to IOS 6

    HI, I upgraded my ipad2 to IOS 6 last night and now I am not receiving emails and it is taking a long time to send emails.  The app says 'connecting' and then hangs with no email coming in and eventually get an error message... 'Cannot Get Mail"  "The Connection to the Server Failed".  It did allow me to create a test email and send it however it did not appear to be actually sending the email... it finally sent the test email after 15 min.  I did not have any issues with email prior to the upgrade and was not getting any connection failed errors.  Thanks Sue

    I had a problem connecting to my exchange server.  It turns out that Exchange will only allow ten devices to be partnered to your account at a time.  Apparently I have a problem with new phone.(Attending the 12 step program now for treatment.) I had this message in my inbox when I logged in to check the server. "You have 10 phone partnerships out of the maximum allowed 10 partnerships. After you reach the maximum, you can't create additional partnerships until you delete existing ones from your account. To do so, sign in to Outlook Web App, click Options > Phone > Mobile Phones, and delete any unused partnerships."  I followed the instructions and delted all the old accounts...problem solved.

  • Email not working after upgrading to Yosemite.

    Mail reports all passwords incorrect. After manually entering the correct password mail still can not connect to mail server.

    the same problem here - Gmail blocked 2 of my accounts as if there was a fraudulent login attempt from my town (technically nobody would hack my account from this location).
    I followed the prompts and changed my gmail passwords.
    Nevertheless Gmail still won't sync with my mac.
    Does anybody know what to do? ( I already checked/unchecked the boxes specified in previous replies).
    Anyway, that's just ridiculous...

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • File- Export not working after upgrade from 11i to R12

    Hi,
    File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
    If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
    Thanks and Regards,
    Jagadeesha

    Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 196613
    In Argument 1 - Type: Number Value: 54
    Out Argument 0 - Type: String Value: 12
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_MENU_ITEM Built-in:
    In Argument 0 - Type: String Value: FILE.EXPORT
    Out Argument 0 - Type: Integer Value: 19
    Executing GET_MENU_ITEM_PROPERTY Built-in:
    In Argument 0 - Type: Integer Value: 19
    In Argument 1 - Type: Number Value: 79
    Out Argument 0 - Type: String Value: TRUE
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: NULL
    In Argument 1 - Type: String Value: GLOBAL.OUT
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
    FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
    FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: N
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing GET_APPLICATION_PROPERTY Built-in:
    In Argument 0 - Type: Number Value: 75
    Out Argument 0 - Type: String Value: IHR40P
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
    FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
    FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
    # 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
    # 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

  • Ipohone 4 hotspot not working after upgrading to ios7.1 ?

    my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only  with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.

    You don't like the answer?
    Again it's not a bug, use a supported carrier if you want Personal Hotspot.
    Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
    Message was edited by: ckuan

  • Web Service is not working after Upgrade SAP EHP6

    Hi ,
    Recently we upgraded SAP ECC 6.0 to EHP 6.
    We have a custom web service which is consumed in  .NET Application to get the Sold To from Sales Order.
    the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
    When I tested the Service in WS Navigator in SAP, it is working fine.
    We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
    But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
    Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
    we did the below steps.
    Regenerated the configuration
    Re imported the Certificates
    Activated the service in SICF.
    Please let me know if anybody have same problem or if any steps we are  missing.
    thanks.
    Uma

    after changing the .NET Application , Service is working fine.

  • TS1702 My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem?

    My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?

    The App store is a problem for many and I have not seen a solution.
    What is "wrong" with your Apple ID?
    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)

         My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
    1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
    2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
    3. I tried to connect to other public area's free network via WIFI, however never joined in.
         I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
         I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
    Terrence

    I have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

  • Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

    Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
    what cAN i do to make it work?please help

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • My built in camera is not working after upgrading to a new Skype version

    my built in camera is not working after upgrading to a new Skype version

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX: 
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

    ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

    Follow these steps:
    go to system preferences.. Open Network..
    CONFIGURATION: DEFAULT
    TELEPHONE NUMBER : #99*
    leave account name and password columns blank
    Now go to ADVANCED
    IN MODEM MENU
    VENDOR : GENERIC
    MODEL : GPRS / 3G
    Press ok
    Then CONNECT.. Enjoy.

Maybe you are looking for