Email not working after upgrading to Yosemite.

Mail reports all passwords incorrect. After manually entering the correct password mail still can not connect to mail server.

the same problem here - Gmail blocked 2 of my accounts as if there was a fraudulent login attempt from my town (technically nobody would hack my account from this location).
I followed the prompts and changed my gmail passwords.
Nevertheless Gmail still won't sync with my mac.
Does anybody know what to do? ( I already checked/unchecked the boxes specified in previous replies).
Anyway, that's just ridiculous...

Similar Messages

  • ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

    ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

    Follow these steps:
    go to system preferences.. Open Network..
    CONFIGURATION: DEFAULT
    TELEPHONE NUMBER : #99*
    leave account name and password columns blank
    Now go to ADVANCED
    IN MODEM MENU
    VENDOR : GENERIC
    MODEL : GPRS / 3G
    Press ok
    Then CONNECT.. Enjoy.

  • One yahoo email not working after upgrade

    one yahoo mail account is not working after upgrade, have touched nothing, and cannot seem to delete it either.
    Was hoping to delete it and then add it.

    ok, I figured this out, go to accounts box, then hit the minus sign.  Nothing I read had mentioned this.

  • Iphoto Not Working After upgrading to Yosemite

    I am unable to use iPhoto after upgrading to Yosemite.
    I have two apple id and when I used one of them i get the message This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled'. I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
    I can't use iPhoto and the iPhoto library to does not work

    I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
    Sign out of the App Store and then sign back in with the other Apple ID.

  • USB headset does not work after upgrading to Yosemite

    I upgraded MacBook Pro 13" retina  to Yosemite and lost Logitech PC Headset 960 sound.
    System preferences shows it in input and output, but no sound.
    After I plug in and out  headset I loose even internal sound for Spotify.
    When headset is plugged in Youtube videos on Chrome stops playing, when I take them out - video resumes.
    Hardware should be ok, because I have 2 pairs of such headset (both of them are not working) and the same hardware on Windows 7 (bootcamp) do work with headset perfectly.
    Have anyone the same/similar problem. Does anyone has solution? Should I migrate back to Maverick and how to do it?
    Already reset everything what was recommended to reset etc.

    1. System Preferences > Sound> Sound Effects
        Play sound effects through:
        Select Logitech/headphone and then back to "Selected sound output device".
    2.Launch iTunes and play a song through headphone and adjust the volume.

  • Thunderbolt ethernet not working after upgrading to Yosemite

    After a very long and frustrating 2 days I have managed to upgrade my MacBook Air (13 Inch, Early 2014) to Yosemite. I have the official Apple thunderbolt to ethernet adapter but System Preferences/Network reports that the cable has been disconnected. It has not and other devices connected to the ethernet cable work fine. Any suggestions to get it working? Anyone else having the same problem?

    I have a similar problem. My Macbook Pro Retina 15" (1st generation) can no longer connect to my university network through a Thunderbolt-to-Ethernet adapter since upgrading to Yosemite. (Actually, OSX 10.9 on a different machine altogether also has the same problem -- tested and verified.) I tried multiple dongles and multiple Ethernet cables, and finally called our tech support. We found a workaround for the problem by purchasing a USB to Ethernet adapter, but this now means that instead of a single device chain leading into the laptop, I am now using multiple ports. I hope a patch for this is in the works.

  • Kodak printer will not work after upgrading to Yosemite.. Please Help

    I have uninstalled and re installed my kodak 5250 more than once and it still does not work. I have carried out a clean install of my Yosemite OS and still no joy. How do i fix this? 

    I've got the 7250 as well -- same exact issue. I sent an e-mail to Kodak support on Friday last week -- haven't heard anything, but they did ask for 2 business days time to respond.
    I've been running the Yosemite Beta on one of my machines for a few months now and my printer stopped working on that one after the upgrade. I kept Mavericks on my other Mac until this weekend, and printing still worked from that machine until I upgraded to Yosemite over the weekend.
    I've got Linux and Windows virtual machines that can print to the ESP 7250, so I can still print, albeit with the hassle of firing up a VM and printing from there... I sure hope Kodak responds! I offered to help them test any beta-quality drivers they may have, so -- we'll see what they say!
    I've been planning to ditch the printer and get a new one, but I'd rather not have to do it right this minute just for a driver issue :-/

  • Hp laserjet cp2015dn not working after upgrading to Yosemite

    After upgrading to  OS X Yosemite 10.10.3 my HP Laserject CP 2025n printer is not working.  It worked perfectly in the old system.  I have tried deleting hte printer. Then when I add it back on it gets to the steps wher it says Setting up HP Color Laserect CP2025dn and it stalls (it stays at this step for more than 3 minutes) . It says "Setting up the device"   In this window I have two options configure or cancel.  After waiting 5 min I  selected connfigure but this does not work.
    I tried turning it off/on before trying a second time, this did NOT work. 
    I checked for new drivers, there are none.  I seem to have the latest.

    OS X Yosemite: Reset the printing system

  • Headphone jack is not working after upgrade to yosemite

    My headphone jack was perfectly ok till i was using Mavericks. However as soon as i upgraded to Yosemite the headphone jack stops working. I am not 100% sure that the software update has caused the issue but it is likely.

    I had the same problem and chatted with tech support and they told me to reset the PRAM and SMC which did not fix the issue.  After contacting them a second time I was told my computer needs to be repaired.  Which is not the problem it is a software issue.
    What finally fixed it was (this was done after resetting the PRAM and SMC):
    * Note: you can try this first and maybe it will solve your issue if not reset the PRAM and SMC then do the following.
    1. Open system preferences
    2. Chose sound
    3. Chose Output then headphones
    4. With headphones plugged in I checked the mute box on the bottom right and unchecked it they worked.
    Then when unplugged the speakers didn't work so I did the same but choosing the internal speakers
    OS X Mavericks: Reset your computer’s PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Hope this helps others!!

  • Logitech USB Speakers not working after upgrade to Yosemite

    After upgrading my MacBook Air to Yosemite, my Logitech Z305 USB speaker no longer work.  In fact, it isn't even recognized in the Output list in Sound in the System Preferences.  It worked nearly all the time with Mavericks, with an occasional need for a system reboot if no sound was coming out, but it was always displayed under the Output tab regardless.
    I just killed the coreaudiod process in the Activity Monitor, but this didn't do anything of note.
    Any ideas of what has to happen for these speakers to work again?
    Here are the system specs:
      Host Controller Location: Built-in USB
      Host Controller Driver: AppleUSBEHCI
      PCI Device ID: 0x1c2d
      PCI Revision ID: 0x0005
      PCI Vendor ID: 0x8086
      Bus Number: 0xfa
    FaceTime Camera (Built-in):
      Product ID: 0x850a
      Vendor ID: 0x05ac  (Apple Inc.)
      Version: 6.46
      Serial Number: CCGBCM031JDL8LLX
      Speed: Up to 480 Mb/sec
      Manufacturer: Apple Inc.
      Location ID: 0xfa200000 / 3
      Current Available (mA): 500
      Current Required (mA): 500
      Built-In: Yes
    Hub:
      Product ID: 0x2513
      Vendor ID: 0x0424  (SMSC)
      Version: b.b3
      Speed: Up to 480 Mb/sec
      Location ID: 0xfa100000 / 2
      Current Available (mA): 500
      Current Required (mA): 2
      Built-In: Yes
    BRCM20702 Hub:
      Product ID: 0x4500
      Vendor ID: 0x0a5c  (Broadcom Corp.)
      Version: 1.00
      Speed: Up to 12 Mb/sec
      Manufacturer: Apple Inc.
      Location ID: 0xfa110000 / 5
      Current Available (mA): 500
      Current Required (mA): 94
      Built-In: Yes

    I zapped the PRAM and SMC, but that did nothing.  https://discussions.apple.com/docs/DOC-3604
    The speakers are still not recognized, nor do they work. 

  • Emailing not working after upgrade from 3 to 4.1

    We have emails going from apex applications that we sending emails to outlook.
    After upgrade to 4.1 they don't send emails as they used to do in version 3.
    System admin verified and all configurations look good..
    Anyone has similar experience
    Appreciate any feedback
    Kp

    Hi Kp,
    please provide more information:
    *) Oracle DB version (has this changed due to the upgrade)?
    *) Which Oracle user is used to send the emails?
    *) Are you sending the emails through an application process or through a background job?
    Please post the exact code you are using.
    Which version 3 are you talking about, 3.0, 3.1 or 3.2?
    Please be as specific as you can be and provide as much context information as possible. I recall that there has been a change in the security settings, especially for mail, don't remember exactly which version, though.
    Do you get any error messages?
    SELECT *
      FROM apex_mail_queue
    WHERE mail_send_error IS NOT NULL;Cheers,
    ~Dietmar.

  • IPad 2 email not working after upgrade to IOS 6

    HI, I upgraded my ipad2 to IOS 6 last night and now I am not receiving emails and it is taking a long time to send emails.  The app says 'connecting' and then hangs with no email coming in and eventually get an error message... 'Cannot Get Mail"  "The Connection to the Server Failed".  It did allow me to create a test email and send it however it did not appear to be actually sending the email... it finally sent the test email after 15 min.  I did not have any issues with email prior to the upgrade and was not getting any connection failed errors.  Thanks Sue

    I had a problem connecting to my exchange server.  It turns out that Exchange will only allow ten devices to be partnered to your account at a time.  Apparently I have a problem with new phone.(Attending the 12 step program now for treatment.) I had this message in my inbox when I logged in to check the server. "You have 10 phone partnerships out of the maximum allowed 10 partnerships. After you reach the maximum, you can't create additional partnerships until you delete existing ones from your account. To do so, sign in to Outlook Web App, click Options > Phone > Mobile Phones, and delete any unused partnerships."  I followed the instructions and delted all the old accounts...problem solved.

  • Photon plus not working after upgrading to yosemite from mavericks

    I upgraded to yosemite. Now my photn plus is not working. Please solve my problem.

    HI
    some apps are not working anymore with yosemite and sometimes you have to buy it (server apps case) or just upgrade it from appstore (iPhoto,... Case)

  • Multiple functions not working after upgrade to Yosemite

    We have an iMac (see specs below) that I upgraded to Yosemite a few weeks ago.  We have had no luck launching Safari or the App Store.  In fact Chrome is the only browser that will work since the upgrade.  Another weird issue is when we go to Youtube it wont load any videos? Everything worked great with Mavericks and I not sure if there is a way to fix my Yosemite issue? I'd appreciate any and all feedback.
    Regards,
    Greg
    Here's the specs on my machine:
    iMac (21.5-inch, Late 2012)
    Processor: 3.1 GHz Intel Core i7
    Memory: 8 GB 1600 MHz DDR3
    Graphics: NVIDIA GeForce GT 650M 512 MB

    Hello Michael Dixon2,
    Thanks for using Apple Support Communities.
    In order to troubleshoot this issue where the optical drive does not accept discs, please follow the steps below.
    Doesn't accept discs
    Be sure to check your disc to make sure it is flat. You can check this by putting the disc upside-down on a flat surface. If the disc is bowed up on any side or in the center, do not use the disc because it might get stuck in the drive. Do not use discs that have anything attached to them or dangling from them (such as "sweeper" or cleaning discs).
    If the drive struggles when you put in a disc or stops part-way, carefully look at the disc for labels that may be interfering. If there aren't any raised labels then try putting the disc in a few more times.
    Try another disc to see if the issue is being caused by a specific disc.
    Make sure you insert the disc far enough for the drive mechanism to activate. You need to insert discs nearly all the way before the drive will activate and pull them in. If you don't completely insert a disc, the drive will reverse and push the disc back out.
    Allow the drive one or two seconds to accept the disc while it is fully inserted.
    Reset the System Management Controller (SMC).
    If the drive repeatedly does not accept discs, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
    Apple Computers: Troubleshooting the slot-loading SuperDrive - Apple Support
    Cheers,
    Alex H.

  • Cd not working after upgrading to Yosemite

    The cd drive in my iMac (2010) quit working after installing Yosemite

    I am unable to use the other which might the registered Apple Id since the option to log in does not appear. What do I do?
    Sign out of the App Store and then sign back in with the other Apple ID.

Maybe you are looking for

  • Itunes on Windows plays one song from library and stops

    I am a new ipod owner and new to itunes. Loaded many CD's, videos and audiobooks without difficulty into itunes 6.0.4.2. Library of songs is extensive but trying to play songs from library results in itunes playing ONLY one selected song. I must re-s

  • Spry Autosuggest

    Hi, I am trying to use spry autosuggest. I have written the below code but I am not sure how to use the "loadfromserver". The adobe documentation says to use {loadFromServer: true, urlParam: "prd"}. What should be my urlParam? Will var dstest remain

  • Download has left me with missing files and cannot start iTunes

    I was prompted to upgrade iTunes and so I did.  The upgrade started when Genuis was still doing it's thing.  At the end of the download, I was prompted to restart.  I closed what I was working on and restarted. Now, I when I try to start iTunes, I ge

  • Who locked my table (don't have dba rights)

    Hi Gurus, I am facing locking issue. A job is running since last 06 hours and i am not getting any output. This job normally takes 01 hr or Maximum 01:30 (hrs: min). I do not have sharp DBA skills. Can someone let me know how to know either my table

  • Displaying Changes to IBAN

    Hi All,           We have a requirement of displaying changes to IBAN(International banking number ) of a vendor. We need to display the old value as well the new one.We are following :    1.Getting details from CDHDR for Change doc object = ‘KRED’