Email not working in my wifi network

my iphone and macbook air seem to have a problem with my wifi network. some apps like email, imessage or even online radios are not working. what can i do?

Try restarting or resetting your router.

Similar Messages

  • IOS 5.1 Email not updating on certain WiFi networks

    All of a sudden, all my iOS devices have stopped updating email on my school's wifi network. All other internet connections are fine (can get on safari, youtube, etc), but Mail does not update. I tried changing the port, but it just kept Verifying and wouldn't change. Unsure if there is something with iOS 5.1 (only started affecting me yesterday. I have tried rebooting my iPad, as well as re-adding the network, but nothing worked. Email still works fine on all other networks I use. Any suggestions?

    It could be the network, but what surprises me is that nothing else is being blocked at all. And I can't seem to change the port that Mail is on. I tried a port scan, and it came up that that port is blocked (993), but it also came up that every other port I tried was also blocked. I used a Mac to do a Port Scan for my iPad's IP, but it wasn't detecting any open ports. So I don't know if it is an issue with the network, or perhaps with my iOS devices. The network has 802.1X security I believe (I need a username and password to login), so unsure if this would affect it at all?

  • IOS mail client not working in certain wifi networks

    Hey,
    this is driving me crazy:
    When I use my iPad or iPhone within our universities eduroam wifi network, receiving and sending mails does not work.
    I am using a google apps account. One would say, ok that's due to some IMAP and SMTP port blocking. However it isn't. Using my android phone with the same settings it just wouldn't work ... Never!
    Using my iPad in other networks works just fine ...
    Please help me with some suggestions.
    Jacob

    It could be the network, but what surprises me is that nothing else is being blocked at all. And I can't seem to change the port that Mail is on. I tried a port scan, and it came up that that port is blocked (993), but it also came up that every other port I tried was also blocked. I used a Mac to do a Port Scan for my iPad's IP, but it wasn't detecting any open ports. So I don't know if it is an issue with the network, or perhaps with my iOS devices. The network has 802.1X security I believe (I need a username and password to login), so unsure if this would affect it at all?

  • Xerox Phase 6280DN printing does not work anymore over wifi network help

    Hello
    I am having recurrent printing problems within a WIFI home office network. After power-cuts (which occur frequently here) I can not print anymore from any computer in the WIFI network on a Xerox Phaser 6280 DN.
    The printer is seen in the printer list but after clicking print in the printer queue it says "looking for printer" and /or "printing". When I connect the printer directly to a Macbook Pro it will print. Today I have downloaded the latest version of the printer driver of beginning this year from the Xerox support site. However now I can not add the printer to the printer list because it does not show up as an option! I restarted the laptop but this does not help. I have also restarted the airport express and airport base station but no luck. I did so by unplugging and replugging.
    The Phaser is connected to an Airport express which talks to an Airport base-station. OSX is 10.6.3. Thanks for any help it is driving me mad.
    Helmuth van Es

    This is how to contact HP support: www.hp.com/go/totalcare (click on Printers & Monitors, there is a phone number on the resulting page).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • BBM, email not working on the new network

    Hi!
    I was using Vodaphone earlier, and all the function of my Blackberry were running perfectly. I could use my BBM, my email etc etc.
    Only recently I shifted to the US and took H2O sim card.( H2O uses AT&T towers.) My monthly plan gives me 500MB data free. Though I am able to use the internet (that too only through Opera Mini broswer) , my BBM, and my blackberry Email client are just not working. (I have to access my emails through an internet browser)
    I must have called up the H2O customer care service at least 10 times asking for the right configuration etc..but I have recieved no help from them at all. They keep transfering the call..and never respond.
    I hope i would some help/answers here.
    Thanks

    That is correct.  
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home. I have restared the phone and toggled the router, still no connection

    After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.

    When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • IPad 2 push notifications don't work on home wifi network

    I have a new iPad 2 and I'm trying to use imo.im for instant messaging. however, in most cases, I do not get push notifications for new messages at all, and when they do appear, they are delayed by several minutes. I installed the push test app and am getting the same results. Usually, it will work for a couple minutes if I turn off the wifi and re-enable it on the iPad, but then it stops working again.
    I have changed the dns servers on both the ipad and my router to use google's servers, but that still doesn't fix it. Push notifications do seem to work on other wifi networks, so it seems like it's something with my router, but I can't figure out what it is.
    Thanks!

    I'd like to add one more data point. I tried the exact same tests on my iPhone 4, but did not get the exact same results. First of all, all push notifications work fine on my iPhone using 3G. When I connected to my home wifi network where I experience the problem with my iPad, push notifications worked, but were slightly delayed compared to the 3G connection.
    So it seems like the problem is on the iPad when it's connected to this specific network. Also, after using it more, the push notifications seem to come and go randomly, so it's hard to predict when they will stop working.

  • Deskjet 3050 not connecting to my wifi network

    Accidentally pressed Restore Default and my printer will not connect to my wifi network. How do reinstall it please?

    Hi @Rotini 
    A full feature driver for Yosemite is not available for your printer, either from the CD that shipped with your printer or from the HP website. This document applies to HP printers supported in Mac OS X versions 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks), and 10.10 (Yosemite) that only have drivers available through Apple Software Update.
    With that being said, I can help you put the printer on your wireless network without software. I use this method for iPads, iPhones and other devices that do not have software.
    Restore the network defaults on the printer by pushing the wireless button, going to settings, and then restore defaults. The wireless button should then start flashing, this means it is now in autowireless mode.
    Connect to the network that the printer is broadcasting. It is usually HP-setup-3050a and then part of the MAC address. The wireless light will still be flashing on the printer at this point, this is normal since this is not an actual adhoc connection.
    Load up the Embedded Web Server (EWS) in the browser on your mobile device. The default IP for autowireless is 192.168.223.1.
    Go to the network tab along the top of the EWS.
    Click on Wireless Setup Wizard along the lefthand side to begin configuring the printer.
    You have now completed the Wireless configuration, follow the next 3 steps to start printing.
    The blue wireless light will go solid, put the Mac back on your own network.
    Add the printer to the System Preferences.
    Print 
    Please let me know if this resolves the issue. I look forward to hear from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

    Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

    Fixing this is a two step process:
    1) System preferences > WiFi/Airport ...
    ... check [√] Ask to join new networks
    "Known networks will be joined automatically.
    If no known networks are available, you will
    be asked before joining a new network."
    2) Remove unwanted networks from the list of "known" networks under
    System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
    Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

  • [TroubleShooting]Continuity Wi-Fi issue. iPhone and mac not on the same wifi network

    Ive been following this and other forums since Yosemite came out few weeks back & i can see many other people are having this issue as well.
    The issue is that I'm not able to make/receive calls on my MBP using my iPhone via continuity.
    Ive tried all of the possible solutions made here and elsewhere on how to resolve this issue. [playing about with settings and iCloud]
    When I'm at home all of the handoff and continuity features work apart from making and receiving calls. Tells me my mac and iPhone are not on the same wifi network, even though they are.
    Now, the solution?
    Now this is where tourbleshooting comes in. Ive taken my mac and to my homegirls house & all of the features worked including phonecalls, without changing anything, except?? THE ISP and the router at her house.
    Personally i live in London, Uk. At home i have sky, and my girl has TalkTalk.
    So im 99.9% sure this has nothing to do with the OS X, but rather its the ISP or the router.
    Now I'm asking for help from anyone that understands the ISP's and routers, on what kind of issue there might be. Im no computer wiz kid, but I'm guessing it could be something that has to do with the NAT type. (Call of duty on ps3 haha) At my house its moderate and my homegirls - open? could that be the issue? if so are there any router settings i can play about to see if that solves the issue?
    Thanks.
    Please only post if you know what you're talking about because i don't want anyone giving me some next instructions for my router so i end up without internet what so ever haha And whoever is having the same problem, id appreciate if you'd post on this to keep the post alive

    Hey chrisfromdc,
    If you are having an issue with your Mac being unregistered with iMessage and FaceTime, I would suggest that you troubleshoot using the steps in this article - 
    If you have difficulty activating FaceTime or iMessage - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • Satellite A110 - WiFi switch is not working with new WiFi card

    Hello Everyone
    I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
    New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
    Please help

    Hi
    Maybe you could enable the Wlan card using different way;
    Go to device manager -> WLan card properties -> Advanced tab
    There you could check if there is a option which would enables the WLan.
    Its worth a try
    Otherwise its a compatibility issue like suggested by PinkPanther
    I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

  • My iPod touch 5th generation will not connect to secure WiFi networks.

    My 5th gen iPod touch will not connect to Secure wifi networks. It always says incorrect passcode. I have checked the passcode over and over again and I am sure it's correct. it's not just happening with my home network, also at work it never works. It is fine connecting to unsecure networks though. please help me.

    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • Hi. I habe one old ID and now i have one new ID. The old one is bad , because the Email not working. But i hav a lot of Apps and i want to copy this apps in my new ID. How can i do this?

    Hi. I habe one old ID and now i have one new ID. The old one is bad , because the Email not working. But i hav a lot of Apps and i want to copy this apps in my new ID. How can i do this?

    You don't. Apps are permanently tied to the ID used to purchase them. Instead of creating a new ID, change the primary email address on your existing ID.

Maybe you are looking for