Email not working with wireless connection

This has been bothering me for ages and I can't get anywhere with it. Please help.
A good while back, entourage and mail stopped being able to send mail whilst i was on a wireless connection. They work just fine when actually plugged into the broadband modem. Why is this? Have tried changing authentication settings and port settings - but to no avail. I get various different messages.
I just want to send an email!
Any help much appreciated.

keano wrote:
OK firstly hello.
I have switched from Virgin Media to BT last week due to very poor service from Virgin. BT infinity is working great with no issues at all.
I do have one big problem though, I have Tenvis IP cameras at my home that are setup to send me email alerts if someone comes near the house. Under Virgin they worked great but with BT I just can not get them to work.
Here are the settings can anyone see what's wrong ?
Sender - [email protected]
Receiver - [email protected]
SMTP server - mail.btinternet.com 
SMTP Port - 465
Transport Layer Security Protocol - TLS  Use SSL, not TLS
SMTP User - [email protected]
SMTP Password - myemail password
Like I say with the Virgin Media modem it works fine, with BT is is like the homehub 5 is blocking any outbound email from the cameras.

Similar Messages

  • Email not working with wifi connection?

    We have a Macbook, 2 iPhones and 2 iPads. We use an Apple Time Capsule as our router. Just recently my husband cannot connect wirelessly from home to his work email with wifi, but it works with 3G? Mine works fine.

    There was an issue with messaging in the original software on the C3, so make sure that you are up-to-date. To check your software version try *#0000#
    Latest software release for Nokia C3-00 is 08.63
    Your service provider may not have the latest nokia version available, but make sure you have the most recent you can get.
    Menu > Settings > Phone> Phone Updates > Downl. phone software

  • TS3276 when I use cable my mail does not work. with wireless ok

    when I use cable my mail does not work. with wireless ok

    Unpower and restart it.  If that doesn't help, try holding menu and left navigation keys TOGETHER for 6 secs.
    AC

  • Email not working, with 3gs, 4, and 4s

    Please help me out, I've searched this issue numerous times in the past couple months. When I had my 3gs, my email started to not load on my phone a couple months ago. I got the "imap.xxx server is not responding. Verify that you have entered the correct account info in mail settings" whenever I would go to check my mail manually because there was nothing being pushed. I would get 2 errors, 1 for each account. 1 is a gmail, 1 is an other. It's an intermittent problem that I used to be able to solve by going into settings, turning "off" that mail account, go to the inbox, then back to settings to turn it back "on". This would work every time. Then after a couple weeks, that stopped working every time. I also tried just turning it off and back on and doing soft resets. That worked most of the time as well. After a while, all of those options stopped working 90% of the time. Then I switched to the 4s a couple weeks ago and the problem is worse. It goes days without working and I can't figure out a way to get it to work. I've searched and have seen the workarounds for gmail, but it's doing it for BOTH accounts, so the problem isn't with gmail. I deleted the accounts and added them back in as well. That worked initially, but the same problem came back up within 5 minutes, or about 3-4 manual fetches.
    What I HAVE noticed is that most of the time while I'm at work, it will fetch fine if I turn off wifi...but it doesn't work every time. It's not just work wifi (we have 2, tried both), it's the wifi at home as well. Even tried an open wifi wherever I was yesterday and nothing. This seems to be my ONLY lead at this point. I've had the same settings for years, never changed them, and this problem just started about a month or two ago.
    My co-worker with an iphone 4 also says she has been having the same problem...we're both AT&T.
    It's very intermittent. Sometimes it will be days without being able to load, sometimes it will be minutes. I finally decided to ask for myself because it's been days of no email and as I'm finishing typing this, I get a push email notification...I swear Apple and AT&T are messing with me   I've had this issue on ios4.x, 5, and now still 5.0.1.       

    Interesting thing happend when I got home . . .
    Found that my home network was up and running, but the power cord to the cable modem fell out.  So, no internet connection.  Once I reset the nework, I was able to get all my e-mail accounts set up and working again on the iphone.
    When I got to work this morning, I had the same problem as yesterday.  Turned off wifi on the iphone and now everything works.
    Checked the office wifi and it is working fine. Although the signal is weak in my area of the office.
    Seems like IOS is not smart enough to know when wifi is available, but the external connection to the internet does not work. 

  • Airport Express not working with wireless router

    I just bought Airport Express to play music on my stereo. My PC running XP is connected to my wireless router (TeleWell TW-EA510v3) with ethernet cable and airport express wirelessly. Problem is that Airport Utility (and iTunes) can't find AE if it's not connected to router with ethernet cable.
    I can connect to AE from Aiport Utility by "configure other" option so it's connected to my wireless network correctly.
    Is this kind of set up even possible (pc wired to router and AE wireless)? I have tried tried WEP, WPA/WPA2 and no encryption on my wireless network and AE connects ok every time but Airport Utility still can't find it. I even tried to make a WDS network but AE was not compatible with my router. Now I can't come up with anything else to try.
    Is there anything else to do? Should I buy WLAN adabter to my PC and would AE work then?
    Why can't Apple make Airport Utility to recognise AE with given IP like with "configure other" option? Should not be too hard to program?!
    Message was edited by: -MTL-

    Follow the isntruction lisetd below...they work.
    Actually, the ae is a slick device, once you get it to work.
    Make sure that one (or both) checkboxes in Airport Utility > Airport Express tab
    (middle of page) are not checked...if one or both are checked, they limit (hide) wireless connectivity options (e.g., WEP-64) to choose from.
    P.S. You must have patience: it may take a couple of minutes to establish the connection and turn the led to solid green. So, give it a chance.
    ===============================================================================
    OMG!!! You are da man!!!
    I have this streaming perfectly now!! Here is what I did for others to see and use (it does work perfectly)
    Step 1) Clear/Reset the Airport Express
    Step 2) Connect the Airport Express directly to the Router/Modem via Ethernet to set up Wireless
    Step 3) Do it via the Manual Set-up Effort Listed Below following:
    AirPort > Base Station
    o Base Station Name: <rename or leave default>
    o Base Station Password: <enter desired password>
    o Verify Password: <re-enter desired password>
    o Remember this password in my keychain: (optional)
    o Set time automatically: (unchecked)
    AirPort > Wireless
    o Wireless Mode: Join a wireless network
    o Network Name: <existing Linksys wireless network>
    o Wireless Security: <select the encryption type of the existing wireless network> I have 64bit WEP
    (Same as 40bit on the drop down menu)
    o Wireless Password: <enter the existing wireless network password>
    o Verify Password: <re-enter the existing wireless network password>
    Music
    o Enable AirTunes (checked)
    o iTunes Speaker Name: <enter desired speaker name>
    o iTunes Speaker Password: (optional)
    o Verify Password: (optional)
    o Click Update to write the new settings to the AX
    In iTunes:
    iTunes > Preferences... > Advanced > General
    o Look for remote speakers connected with AirTunes (checked)
    Once it congratulates you, unplug the ethernet cable
    Verify in Aitport Utility that it still recognizes (if not, repeat the above). Note this may take a few minutes, so be patient.
    Now place the airport express with your stereo (or whatever) and again be patient as it tries to find the network
    (mine took 4 minutes) then it turns green and you are off listening to music on your stereo downstairs in another room.
    Frustrating when it does not work at first, but keep trying and it will work!!
    Thanks everyone for your help!!
    ===============================================================================

  • Aperture email not working with Entourage

    I'm running Aperture 3.4.3 and recently upgraded to Mt. Lion.  Suddenly, my email connection to Entourage is not working, and there appears to be no way to select Entourage as my preferred email application.  Any help, or is this a case of an "upgrade" actually being a "downgrade."  FRUSTRATED!

    OOOOOps--hit the wrong link. THIS DID NOT REALLY SOLVE my problem.  Yes, Entourage runs just fine in Mt. Lion.  It is version 12.3.5. I'm guessing the issue has to do with the sandbox, whatever the heck that is.  Getting sick of having to update everything just to make it compatible with the new OS when it is otherwise working just fine.  I suppose that this kind of nickel and diming and constant need to upgrade is what keeps software companies in business....

  • Email not working with home network

    If this is answered elsewhere, my apologies.
    I have a first generation iPhone, which is set up on the wireless network at work and also at my previous apartment. I had no problems receiving e-mails whether over Edge or wirelessly. When I moved into a new building and set up the router, both the phone and Apple Mail on my MacBook refuse to receive e-mail from either work or personal Gmail accounts, though I can browse the Internet at my heart's content on either phone or MacBook and check email through the browser. If I take the phone off the wireless network, it pulls e-mail off the Edge data network just fine, and it continues to work seamlessly at work. I tend to just keep it on Edge now, which isn't ideal, but I get the e-mails that way. I've had a similar problem with random hotel wireless connections as well.
    Anyone experience a similar problem or have a solution? I'm using a Motorola Surfboard router at home and a WPA passcode. Thanks!

    I have been able to surf on Safari over the wireless network on both the phone and computer, and the phone does pull email on the work wireless network and previous home network. Gmail works just fine on the MacBook too, but Mail doesn't want to pull in messages at all.
    I actually played around more with my router (Motorola SBG900) and when I turned the firewall completely off, the e-mail finally pulled properly. Is it worth just leaving the firewall off, or can I adjust the settings so that it will allow the phone to access the network to retrieve mail? In the advanced settings of the router there are a ton of "Port ID's" and depending on Motorola's vague "High" "Medium" "Low" Firewall settings, it allows inbound access to different Port ID's. Thanks!

  • Email not working with Apple ID

    Have iPod touch 5th Gen. In setting up Apple ID to iMessages, it states my email is already linked to Apple ID. However, the Apple ID wouldn't accept my acct. So I tried putting in my password with the Apple ID, changing password and finding Apple ID. It states there is no apple ID with this email but when creating my acct it won't let me use email to apple ID as it says its in use. Any ideas?

    It is a different ID. My daughter's email worked with her Apple ID to do iMessage and she has same Apple ID as I do for iTunes because she was not old enough at time to have her own email. So this should not be the case.

  • Log on screen not working with wireless keyboard only usb KB

    Since upgrading to mountain lion from the latest version of Lion, I am not  able  to log  on  with my wireless keybord only with usb kb but  the  wireless kb  is  working  well, it  react  but no stars ** appear in the  log on password field
    So i  enter  with  the  usb kb and  then the  wireless kb  is working  well
    I put  all  keybord settings  to  default
    I reset  smc  and pram  but  same behaviour
    Any  hint  to  fix  this  ?

    I fought for it for long time. I used command-r, option key, command-option-r, option-r, everything you can imagine but it did not work. I even  shut down the imac and then tried all these combinations but it still did not work. I EVEN TRIED APPLE's OFFICIAL ANSWER TO THIS ISSUE BUT BELIEVE ME IT DID NOT WORK AS WELL. Then I deeply thought for a while and shutdown the iMac. Then I took off the batteries from the wireless keyboard. Then Waited for 5 seconds or so. Then I just started the wireless keyboard with the button on the side. It started blinking. I immediately understood that my trick is going to work. I understood the problem. While the keyboard was blinking I started the imac. Now after startup chime from apple i just pressed the option key. And guess what- THE RECOVERY OPTION POPPED UP! See, the point is after you restart or shutdown the keyboard is still kind of paired with the imac so when you start it those keys are kind of overlooked. When you reaaly take out the batteries from the keyboard the pairing is lost. When you restart the imac the pairing is established during the startup chime tone. This is precisely the moment to press those keys like option or command-r. The command-r key works only if you have imac that was preinstalled with 10.8
    I hope this saves your hours of work! I really wished that APPLE knew it. I have so much believed in this company so far.

  • Fn+F5 does not work for Wireless Connections.

    Hi, I have Lenovo G580 Notebook. I have recently upgraded to Windows 8 PRO. I have installed all the required driver and components from Lenovo Drivers support website (Including the Power Management Software). When I had Windows 7, I used to press Fn+F5 on the keyboard to access the shortcut to wireless connections. But in Windows 8, when I press Fn+F5, It displays Airplane Mode ON/OFF. In Windows 8 PC settings, the wireless as well as Bluetooth options have greyed out. I have installed the right Bluetooth driver (Atheros AR3011 Bluetooth 3.0) and wireless driver (Qualcomm Atheros AR9285 Wireless network driver). But still no way to turn on the Wireless network and Bluetooth.
    What to do? Any Ideas?

    thisismylogin wrote:
    I have this problem with my new computer it has windows 8 and always has though any solutions ?
    Remove Energy Management for Windows 8 and install version for Windows 7, Fn+F5 should work just fine.
    T60/T618895-W4M, UXGA, T9300, 8GB RAM, Vertex3, Intel 6300 Win8.1
    R61e 7649-W1Z, T7250, Intel 6300

  • EPrint to email not working with D110a

    I setup the online account and was provided with email to use with the printer. Then, I added 6 email addresses that were valid senders. When emaila are sent, no verification email is sent back and nothing prints or shows up in the actiitylg for that printer.  I attempted to send in various ways from multiple systems including Outlook 2010 and iPhone...and it still did not work.  Email address provided was[text removed for privacy]   How can I get HP support to help me find out why this is not working?  Thanks!
    This question was solved.
    View Solution.

    Okay, so some are working, that is good
    The one I sent from from Outlook, so it is not a general Outlook issue. But, could be related to your Outlook settings or the account Outlook is using to send the email. The problem I have is understanding how when you send, you are not getting the verification that you sent. Be SURE the email address you are using in Out look is right. Best way to do that is copy and paste it from a source you know is working. Something as simple as an extra space can mess up an email address.....
    Other than that, it would be nice if someone from HP would chime in.... I got a question from yesterday and they have not responded yet ether......I have had the printer since Sunday, so my knowledge is pretty limited
    My HP Printer - Photosmart D110a
    My Music - http://www.bremencole.com
    My Bicycle Journal = www.bikejournal.com/journal_public.asp?rname=BremenCole

  • Email not working with iOS4

    Downloaded and installed iOS4 on my wife's iPhone 3GS. Her Comcast and gmail accounts are no longer working, i.e., mail is no longer getting pushed down to her iPhone. She can send mail.
    I have seen a lot of discussion of mail issues with iOS4. Anyone have thoughts or, better yet, solutions for this one.

    Interesting thing happend when I got home . . .
    Found that my home network was up and running, but the power cord to the cable modem fell out.  So, no internet connection.  Once I reset the nework, I was able to get all my e-mail accounts set up and working again on the iphone.
    When I got to work this morning, I had the same problem as yesterday.  Turned off wifi on the iphone and now everything works.
    Checked the office wifi and it is working fine. Although the signal is weak in my area of the office.
    Seems like IOS is not smart enough to know when wifi is available, but the external connection to the internet does not work. 

  • Attach to email not working with Outlook 2011

    I've created a pdf document for users to fill out and then click a SUBMIT button which attaches the document to an email and sends it back to me.  It works great with Windows users, however, it fails to create an email for Mac users with Outlook 2011.  It opens the program but doesn't create an email.  I'm using Acrobat Pro 9.5
    Can someone please help in fixing this matter as there are people that use Macs.
    Thanks
    Matt

    Yes the Acrobat PDFviewer Plug does nt work with anything but Safari on a Mac. In OS9 days it would work with any web Browser.
    But Adobe has decided That they will only support Webkit Browsers and refuses to support despite pleading with Adobe by people using Ecko based browsers. This leave more people unable to use the adobe PDFviewer plugin, than can. A fellow from Germany called Schubert has come up with a PDF Browser Plugin that can use any Browser Webkit or Gecko except Internet Explorer. The one caveat is that you can't fill out forms. And he is banned from putting that feature in, by Adobe.

  • Email not work with work wireless network?

    Hi;
    I have my POP email account set up on my touch. I am able to send and receive using my home wireless network. I also have been able to do it successfully on free wi-fi networks such as at airports.
    However at work I am able to surf internet using my touch on the wireless network but my email application seems unable to get mail..
    Why is this and how can i fix it..
    Any suggestions

    Hello, 
    The firewall at your work is probably blocking services on the ports you are trying to use for your email. Have a talk with the IT guys to see if they can help.
    mrtotes

  • N8 email not syncing with 3G connection, with only...

    Hello
    I did set up yahoo email account on my N8. But it never retrieves my email when its connected to 3G internet (service provider). But when i get home with Wi-Fi connection, it starts to sync my emails like bulk of new emails. So in conclusion, my phone's email doesn't work when its not connected to Wi-Fi. Please help.
    Thank you

    Check the settings for your 3G connection under Settings->Connectivity->Settings->Destinations->Internet->(provider). Tap on Options->Advanced settings.  Do you find proxy server settings configured there (name or address on Proxy server address)? If so, try removing these and see if it helps. If not, it could be that your provider is blocking certain ports. One of the providers in my country is blocking SSL so I switched to another provider.

Maybe you are looking for

  • Multiple errors upgrading from snow leopard to mountain lion

    While attempting to upgrade on an early 2008 Mac Pro, I received the "could not create recovery disk" error on install and had to abort the upgrade. I found online a suggestion of decreasing the size if the main partition (I have no other partitions

  • How to get GUID of a milestone?

    Hi, In my requirement, I need to identify each and every milestone uniquely. I know that every milestone is assigned to a GUID. How to find out a GUID for a milestone? Where these GUIDs for milestones are stored?  Also, please tell me how to give our

  • Save PDF to folder as JPEG Error

    This is happening in Aperture, and other programs too. When I try to use "Save PDF to folder as JPEG", the export begins, but when it comes to the pop up box that copies the files onto the desktop an error message indicates there has been a problem w

  • "Message not downloaded..." What does that mean?

    Help! I moved a sub-mailbox to another position in the toolbar and then moved it back. After this, all of the messages in the sub-m/b read as follows (or similar): "The message from Paul Reed <[email protected]> concerning "Julie" has not been downlo

  • Lms 4.x dfm alert oper/unresp.

    Hi, few of the interfaced in routers switches went down and the alarm was not displayed in lms 4.2.3 dfm activities pages.. my observation was that, there were unresponsive alarms generated, and according to my knowledge untill that interface becomes