Email notification to SC approver and Admin..
Hello Experts,
In my SC approval workflow, I need 2 types of Email notification
1) Email notification to all approvers once the SC is ordered, there are various level of appovals for each level to each approver
1 email notication is required saying - u have SC XX in your UWL for approval. No offline approval is required here.
Solution I have planned is scheduling job for /SAPSRM/OFFLINEAPPROVALSEND every hour. Please let me know if there is any other standard solution possible.
2) Email notification to System Administrator if any SC workflow goes into error mode for any reason.
I am not able to find any standard solution for this. I assume I have to write custom program for this which will identify all failed workflows in last hour or so and send email notification to Administrator . Please let me know if there is any standard solution possible. Is it possible to use Alerts in this case???
Regards,
Hema
Hi,
1) /SAPSRM/OFFLINEAPPROVALSEND is the right one.
2) Please check you have maintained workflow administrator in SWU3 transaction. I think workflow admin gets error notification.
Regards,
Masa
Similar Messages
-
IPhone 4 screen is completely black
can still hear when I get email notifications
Siri still works and can hear my music
what could have gone wrong?try to make a hard reset (home button +power button for 15seconds) then restore by itunes.this is called DFU mode,once you done,can only restore the device by itunes!let me know if it works
-
How to activate email notification for SC approval
Hi Gurus;
We are using SRM7.
How to activate email notification for SC approval i.e. the system should send email to the approver's external email (e.g.Outlook) informing that there is SC to be approved.?
ThanksHi,
You can schedule the /SAPSRM/OFFLINEAPPROVALSEND program.
http://help.sap.com/saphelp_srm701/helpdata/en/31/47c6cb8e9249f2bc29444212e4704a/frameset.htm
Regards,
Masa -
Send email notification in latest start and latest end
Hi all,
My requirement is to send email notification on latest start and latest end. For latest start, a notification needs to be sent to the manager asking him to start processing the Leave request.
Am not too concerned about the latest end, since the latest end takes the workitem(MODELED ACtion) to the next manager, where I can insert a email step in the workflow.
My concern is how can i send an email to the manager if he has not started processing the lave request within say 3 days
thanks a ton.
regardsHi,
If you are looking to send notification ASA work item reaches a latest end then follow the below steps.
1. Open the step for which you have set the latest end and click latest end tab.
2. Under the same tab you will find a Drop down box you will find two entries 1 Display Text 2 Modeled choose the 1 option. and define the text in the task description by choosing Latest End description.
3. Choose the container element you might have populated the email address.
Now the configuration that you need to make sure to send a mail to external email id is SCOT settings if SMTP node is configured then this node would be sending mails to the
Regards
Pavan -
In my site collection i have a document library and document library has customer folder, each Customer folder has 4 sub-folders. i want to send email notification with file name and description to group and users, if they upload any files to Particular
folder name "Final" not others 3 folders. would it possible to accomplish this solution? if yes please suggest which way i can do that.
Note: we have different groups of people, for example Team A and Team B. if files uploaded by any member of Team A, notification should sent to only Team A and specific people not Team B.
Thanks in advanced for any help!Hey Rakib,
You can add your group and those other people in To field of send mail activity. Have below snapshot for your reference.
If Current Item URL Contains FolderName (i.e. Final) & Is Current User a member of of Team A
Send Email to Team A; People1; People2;
Thanks. Please mark as an answer if it helps. -
We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?
What version of Solman are you using ? Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1 else in 7.01 you use auto reaction methods to monitor .
Regards
Jay -
Adding a hyperlink to the email notification for leave approval
Hi All,
Is it be possible to have a hyperlink in the email notification that goes to the approver ( for a leave ) so that the approver can click on the link and be taken straight to the ESS/ MSS portal to approve/reject the leave request?
Regards
AKBasically you can modify the standard task too. Of course it is not recommended, but maybe it is not that bad, if you only need to modify the work item text (and the variables are already available in the container, so you don't need to do any additional bidnings and container elements (or do you?)).
Other options is that you take a copy of TS12300097 and a copy of the leave request worfklow template, and then do the changes to these copies. Then you just need to remember to also check the SPRO settings, that your copy of workflow is started instead of the standard workflow.
Regards,
Karri -
Adding information in email notification of invoice approval workflow
Hi All,
We have a requirement to include additional information in the email notification sent by the workflow to the approver, like
1) Having Invoice Currency Code and PO Number in the header of the notification
2) Adding static text on the body.
3) Also need to add a sentence in the standard text which comes at the bottom of the notification and need to remove the extra RESULT region which is coming in the notification. (Highlighted in bold)
Please click on one of the following choices to automatically generate an E-mail response. Before sending the E-mail response to close this notification, ensure you have provided the reason for rejection within the quotes ‘ ‘ in the body of the email.
RESULT (needs to be removed)
RESULT: Approve Reject Request Information
Any pointers on this would be really helpful.
Thanks,
ManojPlease open the desired workflow in the workflow builder.
--Open the particular Notification
-- Open the related Message.
-- Click on Add which allows you to change the Message context. -
Email Notification to Resource Approver
Hi All,
I am using following product...
IDM 11g R2 (BP03), SOA 11g
I want to send the Email notification to the Request Approver (my workflow is working fine, resource is getting approved and provisioned properly) I have made all the required settings in SOA for Enabling Email notifications along-with enabling 'RequestNotificationLevel=1' in OIM.
The Requester is getting all the notifications i.e 'Request Created' and 'Request Status Change' notifications.
Its Only That the Approver is not getting any notification. What can be done to send the Notification to the Approver in his mail box (just like being received by requester) so that he knows that some request has been generated for his approval.
Thanks and Regards....Any Comments!!!!!!!!
Alos if any one can tell what is the default behavior of IDM 11gR2 for email notifications, I mean does it send notifications to the Requester and Approver OOTB like the previous versions of IDM or it is different from its predecessors that it requires exclusively additional configurations / coding / patch for making Email notifications enabled for the Approver? as the Notifications for the Requester are working like a charm without any additional configurations.
Regards. -
Email Notifications for UWL Tasks and Collaboration Tasks
Hi,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
I done with the all the Configurations suggested in the below link:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/706d054d-da24-2b10-f18a-fc82faf6468e]
But Email Notifications are not reaching the users Lotus Mail ID. Could any one please suggest me that i am missing any Configurations.
Thanks in Advance.
Regards,
Sridhar.Hi Sridhar,
I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
https://wiki.sdn.sap.com/wiki/x/g4KmAw
Please see if it helps,
Robert -
Email notification for PO approval going to the email of appover
Hi Gurus,
May i know what configuration or steps going to used for email notification of PO for approval going to the email of approver?
Thanks,
MarinaHi Marina,
You need to configure (t.code is SWU3) SAP Workflow to sent mails' from SAP to to systems such as Outlook or Lotus Notes. Below links'a maybe very useful for you;
http://help.sap.com/saphelp_dimp50/helpdata/EN/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://www.sap-basis-abap.com/wf/sap-workflow-faq-techniques.htm
Cheers -
Send email notification when the baseline and actual values are different in project
Hi
I am working with MS Project 2013 and Project Server 2013.
I need to the send email notification to the program manager (or to a user) whenever the project manager changes the task finish date for a task. Comparison should happen with the baseline finish and the difference needs to be updated to the Program Manager
over mail.
How to configure/customize email notification for changes in MPP.
Please suggest.
Regards,
SudhirIf you are not having developer skills it will be complicated for you.
You need to create event handler by code, as in the below link:
http://msdn.microsoft.com/en-us/library/office/gg615466%28v=office.14%29.aspx
Then compare your values and finally send email by code.
Twitter : @MShoubaki | http://jo.linkedin.com/in/mshoubaki -
Email notification for PO approval
Hi all,
Can PO approval alert as well as email to authorizer?
Approval procedure only alert authorizer. l thinking set an alert, however alert will not trigger on draft document...
Thanks,
PhoebeHi Phoebe,
You may try a user alert to check WDD related tables for alert info.
Thanks,
Gordon -
OIM 11g email notification(request submitted, approved, reassigned, etc)
Dear All,
How to emplement e-mail notifications in 11g?
It looks like there some notification templates available. But how those could be tied to different stages of the request? (request submitted, approved, reassigned, etc). Is there any authomation available or everything should be created now manually in the workflow? SOA suite has notification service. I suspect this is what should be used now.
How notification templates are used in the workflow?
If you can provide steps and/or example this would be very helpful.
MariaI suspect article ID 457836.1 is valid for 11g as well. (FYI)
-
Email notifications has guest username and pwd in body
Hi Guys
I have an issue and will need your advice.
I have just applied AD.i.7 on Oracle E-Bussiness Suite 11.5.10 and whenever i am applying some leaves.
One mail is sent to me and one to the approver.i get mail correctly hovewer the approver sees username (GUEST)and login page in the mail body.
Can someone help me.
REgards
KamHello
Thanks for your advise.In fact Oracle Support also recommended me the same.
I have already set a plan to migrate to Family Pack K Rollup 3 and down the road I will have to apply the ATG_PF.H RUP6 that will resolve this issue.
However I cannot apply the AD.I.7 on Live with this bug and wait to apply ATG_PF.H RUP6 as it will take some time.
I am planning to uninstall the AD.I.7 and install the AD.I.6 and test this issue.(FYI..We did not get this issue with AD.I.5)
Can you please advise how I should proceed for the uninstallation of AD.I.7 and install the AD.I.6.Previous installed version was AD.I.6.
Regards
Kam
Maybe you are looking for
-
Acrobat 9 Forms - create circle around text on mouse click?
Hello. I've searched all through the Help documents, this forum, acrobatusers.com, google, and haven't been able to find what I need. So if this question has previously been answered, accept my deepest apologies and point me in the direction of sai
-
Greetings: Please either confirm and/or correct following proposed solution for Myfaces tiles. Issue: isert a tile definition and attribute in a pure jsf page. First passed solution: A hybrid of Jsp programming and Jsf. I was able to create a tile pa
-
Problem about JTable's DataVector probelm
I'm writing a database program with JTable, I want to make a copy of the data content of the jtable before editing the values. I first get the TableModel of the table then get the DataVector out to clone a copy to a new Vector, but when I change the
-
Question about performance (entities & data object)
Hello: I know that this can be, maybe, a silly question, but I've got the doubt I get a local reference to a entity ( myEntityLocal ) and I'm going to get many values from it. For example myEntityLocal.getId(); myEntityLocal getName(); myEntityLocal.
-
ChaRM: Technical Problem RFC Module /TMWFLOW/TASK_START
Hi I am testing ChaRM in Solution Manger 7.1 with three dummy systems. I am trying to change ZMHF to "Production" and get the following error: I wasn't getting this last week so not sure what has caused this to start appearing? Any ideas??? Thanks Sh