Email notification trigger from the generate warning processor

Hi I am using a generate warning processor in the process which aborts the job when the threshold limit is reached. I  need to send out email notification why the job failed (including the message from the generate warning processor). Is it possible?
Thanks in Advance
LK

Hi,
Yes, this looks like a bug in the UI as it doesn't seem to persist the selected template and always resets the selection to the first entry in the list. It looks like for now you'll only be able to have a single working template on the server with a name alphabetically before "Default Template". I'll see if there are any workarounds.
I've raised a bug for this btw.
thanks,
Nick

Similar Messages

  • Need to stop Email Notification only from Compensation workbench

    Hi All,
    I Need to stop Email Notification only from Compensation workbench, if is there any possiblility kindly guide me guys as I am stuck up due to this.
    Regards,

    Hi,
    I can see two CWB workflows - bencwbfy.wft and benssenrtfyi.wft. These are available under $BEN_TOP. You can open these workflows through the Oracle Workflow Builder and note down their workflow names. Thereafter, you can download the definitions of these workflows (most current workflows from the database) from the database through the concurrent program - Workflow Definitions Loader - which should result in the wft files on the destination you've provided running the concurrent program.
    Copy those files from the server, and edit them locally using Workflow Definitions Loader to remove or redirect workflow notifications appropriately. Please be aware that this amounts to a customization so you should evaluate the impacts of doing this on your installation. Also, for CWB to support custom workflow, my understanding is that you need to be at Family Pack J or above (you may wish to validate this through Support, though).
    Regards,
    Rakesh

  • Customize email Notifications sent from UWL

    Hello,
    Can the eMail notifications sent from UWL be customized in Portal 7.3 ?
    Regards,
    Jay.

    Hi Jay
    I hope you are well and many thanks for using the SAP Discussion Forums.
    In relation to your query you mentioned the following:
    Can the eMail notifications sent from UWL be customized in Portal 7.3 ?
    In UWL lingo, notifications that you would see under the notification tab are specific to: Knowledge Management Collaboration Recent Notifications. Notifications through the Universal Worklist deal with Knowledge Management and Collaboration. If you are looking to integrate SAP Office within the Universal Worklist please refer to note 945484 How to receive office notifications in the universal
    worklist.
    Now in terms of actually customizing the emails themselves. From my research and understanding if
    you are using the default mail notification this is not customizable. You can however put a notification task in the flow(just before the human task), if you want to customize the notification content. This would be done through the task ID for the workitems (you can find this through the enalbement of the support information).
    Kindly update me as per your findings.
    Kind Regards & All The Best
    Troy Cronin
    Enterprise Portal Support Engineer
    AGS

  • I have several users in an exchange environment who cannot email a photo from the iPhone.  When the click on Email Photo, they are prompted to configure a mail account even though there is already an exchange account in place.  How do I remediate this?

    I have several users in an exchange environment who cannot email a photo from the iPhone.  When the click on Email Photo, they are prompted to configure a mail account even though there is already an exchange account in place.  How do I remediate this?  Not all of the users in our environment have this issue.  If the users having this issue, install a secondary email account, Gmail, Hotmail, etc, then they can send through those accounts.  Why would the exchange account not be seen to send photos?

    Sounds like it worked until the policies associated with the account that are creating the problem were fully pushed down.
    Try setting up a new (test) Exhange account and see if it behaves the same way on the phone (after removing the problem account from the phone, of course).

  • How can I remove the "Notifications" icon from the Menu Bar in OS 10.9?

    How can I remove the "Notifications" icon from the Menu Bar in OS 10.9?

    As far as I can tell, this is your best option: http://reviews.cnet.com/8301-13727_7-57608829-263/how-to-turn-off-notification-c enter-in-os-x-mavericks/

  • How can I empty my trash email. There is no delete or delete all option after the emails are highlighted from the edit option. This is on an i phone 4 running on ios 7.1.2

    How can I empty my trash email. There is no delete or delete all option after the emails are highlighted from the edit option. This is on an i phone 4 running on ios 7.1.2

    I have 7 email accounts on my phone. If I tap EDIT while viewing the Trash folder in any of them I see "Mark All" on the left and "Delete All" on the right. If you tap any message, however, the legends go away.

  • How to catch an analog hardware trigger from the PFI0/TRIG1 pin?

    I have a PCI-MIO-16E-4 DAQ Board, a BNC-2090 Connector Block and LabVIEW 6.1. How do I configure a VI like the example 'Acquire N - Multi-Analog Hardware Trig.vi' to accept an analog input trigger from the PFI0/TRIG1? What parameters do I give to the AI Config, AI Start and AI Read VIs? The parameter 'Trigger channel' only seem to accept channel numbers, so what channel number do I have to give to make it undestand that I want to catch the trigger using the PFIO/Trig Channel?
    Thank you.

    Hi,
    look into Help!
    AI Start needs on "analog chan and level" the string "PFI0" to use PFI0 for analog trigger input. In the example it is the control "trigger channel".
    Unfortunatly the help is not complete. "analog chan and level" is a cluster of two elements, the channel name and the level. The level is not explained in help.
    Waldemar
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

  • When emailing a photo from the updated iPhoto, how do I find the CC and BCC button, and how do I send to a group from my address book?

    when emailing a photo from the updated iPhoto, how do I find the CC and BCC button, and how do I send to a group from my address book?

    The email function from iPhoto is pretty basic. The only Bcc available is to yourself (in iPhoto > Preferences > Advanced), cc: does not appear to be available at all, and it does not appear you can email to a group.
    You can change this by going to iPhoto > Preferences > General and next to where it says Email photos using: select Mail. If you do this you have all the options available in Mail including Cc: and Bcc: and the ability to drag a group from Address Book into the mail addresses.
    Best of luck.

  • My iPhone's screen is unresponsive when emailing a photo from the camera roll

    Hello all, first time here, and I have an odd issue with my iPhone 5, running iOS 6.1.4
    If I go to my camera roll and select a photo, then go and select "mail" from the options, it brings up the typical email message(I use gmail)
    but if I go to tap the address section, it takes 5-6 taps to get the phone to bring up the keyboard to enter an address. The weirdest part is,
    if I go into my email and start a message normally, it only takes the 1 tap to get the phone to bring up the keyboard for the address. I have
    tried to reproduce this in other apps, and it appears to only happen when I email a photo from the camera roll.
    Any ideas? Maybe a backup/restore? Thanks in advance.

    Restored as new, did not restore from a backup. Set up my gmail account, took a test photo and tried to email it, and problem persists. Guess it must be a hardware thing, just so weird it only happens in the camera roll and not in regular email.
    Thanks for the advice and help everyone!

  • I have a hotmail account sync. With my Mail on the Macbook and iPad, everytime I open my mac all emails are transfered from the iPad to the Macbook. Is there a way to keep a copy of the emails on the iPad? Or access them after transfered?

    I have a hotmail account sync. With my Mail on the Macbook and iPad, everytime I open my mac all emails are transfered from the iPad to the Macbook. Is there a way to keep a copy of the emails on the iPad? Or access them after transfered?

    AND yea i afraid to sync my iphone and lose everything ;( i had everything perfect sync ing perfect ical,contacts,mail,apps and now sence new library I dont wana lose everything.....my hole life runs on my fone i need help bad

  • My emails are deleted from the server daily. I checked leave emails on server? This is a new problem, My emails would always be on the server until I deleted

    On a daily basis my emails are deleted from the server, even if I still have them on my computer.

    Actually, it had to do with Comcast, not the iPad. The default for Comcast is IMAP, and that is based on the information they have available when the account goes into verification. It verifies an IMAP account, and since you have not migrated to the IMAP account, you were having problems. It isn't something anyone can fix, except you. It would not ask you at the beginning if you wanted IMAP or POP, it has to do with the mail provider's verification settings, which is a Comcast issue, but because they are providing IMAP now, it defaults to that. If you are still using POP, you have to force the mail app to get there, which is what I provided you the instructions for. Apple is not going to fix anything, because there is nothing for them to fix.
    Either way, you got it fixed and that is all it takes. As a Comcast customer, I was aware of this, since I had migrated to IMAP already.

  • Emailing takes forever from the built-in notes app

    On Iphone 3G I am trying to email a note from the built-in Notes app and I have been getting the "sending 1 of 1" message now for over 40 mins.  I have a good wifi connection.  I don't have any apps restricted.  I powered the phone off and on. Any ideas?

    Try testing other things that require Internet on your phone to see if they work. If you think it is because of the Notes app, try copying and pasting the text in your note. If it is still not working, try signing in and out of your Gmail account. Still not working, ask Apple directly.

  • SAP BPC 10.0 Netweaver : Workstatus email notification sender is the User how to change it ?

    Hi Gurus,
    I've just set up email notification for Workstatus. I works fine but I've noticed something that won't be accepted by my customer :
    I Had created a BPC Service User SMAIL to send email notification. But it is useless since the email notification sender is always the user who actually made the workstatus change.
    This is very strange because this means that SAP can send emails IN NAME of Users. By default the email used is the user's email set up in SU01 and if the user has no email the sender mail adresse is : USERID@DEFAULTHOST
    Default domain defined in SCOT transaction for SAPCONNECT.
    I think that this situation raises a security breach ; to my opinion SAP should not be able to send emails in the name of users.
    Do you have any idea to change this situation in order to make all notification emails send by one unique System User as BPCSERVICEMAIL for instance.
    Thanks in advance for you help.
    Vincent.

    Hi JW,
    The answer to your question #2 is that we won't have SSIS packages in BPC7NW since all SQL server based functionality won't be there in Netweaver version. If you use migration tools to migrate from BPC5.x to BPC7NW, it can convert SSIS packages. However any custom SSIS code would have to be converted manually. For more information, please read Ryan's blog at SAP's definitive strategy for planning technologies moving forward: What's the word on BPC, BI-IP and SRC?
    Regards
    Pravin

  • Email Notification send from previous setting although it has been deleted.

    Hello,
    Current monitoring schedule for Daily Monitor Open Item (Vendor) are 3 times a day at 1700, 1730 and 1800. However, we receive a notification for this monitoring activity at 0600 with a differents in (1) email header, (2) Monitoring ID and (3) Email Description.
    (1) Email Header:
    a) Normal notification has a header like below:
    Solution number.....SOL/0020203551/0021324570_0020203551
    Solution name.......BPM - PER
    Business Process....Daily Monitoring
    Step................Monitor AP Open Items
    System..............PER
    Monitoring Object...Open Items (Vendors)
    Monitoring ID.......000002736757000
    b) The notification we received at 0600 has header like below:
    Solution number.....SOL/0020203551/0021324570_0020203551
    Solution name.......BPM - PER
    Business Process....0000000662
    XXX.................0000000674
    System..............PER
    Monitoring Object...0000000719
    Monitoring ID.......000002563457000
    (2) Monitoring ID
    a) Monitoring ID from our setting at 1700, 1730 & 1800 is 000002736757000
    b) Monitoring ID from email at 0600 is 000002563457000
    (3) Email Description
    Email description from email at 0600 is an old email format. We have no longer using that email format for all of our monitoring activities.
    We double check this issue at Scheduling Overview and every day it is expected Collector Runs at 0600 even weu2019re not scheduling this session.
    We already deactivate and delete the current setting. Then do the setting again for Daily Monitor Open Item (Vendor). But still the notification is still there.
    Please advice on how to disable the unwanted email notification.
    Thanks

    I have discovered this site which claims the ability to do what you might want. I have no personal experience of it!
    http://www.icopybot.com/itunes-backup-manager.htm

  • Strange behavior of email notification: where is the log?

    Hi,
    The email notifications have a strange behavior in our productive system. When the system process whatever subscription only the firsts four notification are sent by email even thought  all the inbox notifications are sent. I checked the mail server and only four smtp connections are sent..... In the development system it is working well, I mean all the emails are sent using the same mail server....  I marked the option Enable session debug info in the EMAIL channel but I see nothing in the los (default.trc).
    Is there any log to check what it is happened? Where is the log of session debug info?
    Thanks
    Antonio

    Thanks for you fast replay.
    I would like to increase the logging of Notificator (com.sapportals.wcm.service.notificator.wcm) to DEBUG  but in NW7 SP13 I do not find that logging locations.
    Could you give any hit on it?
    thanks
    Antonio
    By the way... I found  the following warning:
    JMX connector exception occurred while processing external JMX request [ JMX request (java) v1.0 len: 314 |  src: cluster target-node: 8573000 req: invoke params-number: 4 params-bytes: 0 | :name=com.sap.portal.prt.bridge.service.mbeans.PRTMBeanRuntime,j2eeType=PRTBridge_JMX_SECTION,SAP_J2EEClusterNode=8573000,SAP_J2EECluster=""... [see details]

Maybe you are looking for