Email Notification When Specific In/Outbound Queue Is Blocked

We are running an integrated environment of ECC and SRM with qRFCs to transfer data, such as a Purchase Requisition, from ECC to SRM system (no XI / PI in the landscape). Sometimes the entries in the queue would be stuck and block the queue from being further processed. We would like to have email notification sent out to responsible persons when that happens. In particular, we would like email notification to be sent out when BBP_EXTREQ_TRANS entry is blocking the queue.
I have read the following blog and think it is a promising general approach.
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
I have however two questions regarding the approach:
1) The blog has the presumption that XI is involved. XI/PI is not part of our landscape.
2) Can we customize the alerting mechanism further by specifying the queue name for alert to be sent out?
Thanks.

Hi Ashish,
Hope you are familiar with WLST please grab ideas from the following beautiful site, which delivers you a lot.
1.Sending Email Alert for WebLogic Servers Current State &laquo; Middleware Magic
2.http://middlewaremagic.com/weblogic/?p=5177
3.http://middlewaremagic.com/weblogic/?p=5582
4. http://middlewaremagic.com/weblogic/?p=7042
First of all why do you allow your servers getting down? If it is often then you need to raise an SR with Oracle. If not tune the parameters according to your environment.
Thanks,
Karthik

Similar Messages

Option to configure email notifications when designated numbers are enabled to forward all

Hello,
I have a general question about call forwarding. We have a lot of sites around the country and would like to setup automatic notifications if a site forwards their main line to voicemail. Does anyone know of an option in CUCM to configure it to send automatic email notifications when certain designated numbers enable/disable forward all to voicemail? Or does anyone know of any alter options?
Currently using CUCM 8.6.2
Will be upgrading to CUCM 10.5 in the coming months.
Thanks

Hi,
CUCM natively does not have such a feature. Call forward related specific events are logged in sdl traces which you can filter using some custom software to get the report generated as per desired frequency.
HTH
Manish

Why i dont get email notifications when someone uses my apple account to know my location through Find my Iphone?

Why i dont get email notifications when someone uses my apple account to know my location through Find my Iphone?

Try adding [email protected] as a VIP contact in your icloud mail app using the appleid used for icloud if using multiple accounts (i.e different itunes and icloud account).
But seriously that happens really !? not getting emails for using icloud services with a valid appleid.

Sending an email notification when an IDOC get failed

Hi Experts,
Can anybody tell how i can send an email notification when my Idoc fails.
Regards,
Ratheesh

report zalv10.
type-pools: slis.
data: g_repid like sy-repid,
gs_print type slis_print_alv,
gt_list_top_of_page type slis_t_listheader,
gt_events type slis_t_event,
gt_sort type slis_t_sortinfo_alv,
gs_layout type slis_layout_alv,
gt_fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of gt_fieldcat,
col_pos type i.
data: begin of itab,
field1(5) type c,
field2(5) type c,
field3(5) type p decimals 2,
end of itab.
data: begin of itab1 occurs 0.
include structure itab.
data: end of itab1.
data: begin of itab_fieldcat occurs 0.
include structure itab.
data: end of itab_fieldcat.
Print Parameters
parameters:
p_print as checkbox default ' ', "PRINT IMMEDIATE
p_nosinf as checkbox default 'X', "NO SELECTION INFO
p_nocove as checkbox default ' ', "NO COVER PAGE
p_nonewp as checkbox default ' ', "NO NEW PAGE
p_nolinf as checkbox default 'X', "NO PRINT LIST INFO
p_reserv type i. "NO OF FOOTER LINE
initialization.
g_repid = sy-repid.
perform print_build using gs_print. "Print PARAMETERS
start-of-selection.
TEST DATA
move 'TEST1' to itab1-field1.
move 'TEST1' to itab1-field2.
move '10.00' to itab1-field3.
append itab1.
move 'TEST2' to itab1-field1.
move 'TEST2' to itab1-field2.
move '20.00' to itab1-field3.
append itab1.
do 50 times.
append itab1.
enddo.
end-of-selection.
perform build.
perform eventtab_build changing gt_events.
perform comment_build changing gt_list_top_of_page.
perform call_alv.
form build.
DATA FIELD CATALOG
Explain Field Description to ALV
data: fieldcat_in type slis_fieldcat_alv.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD1'.
fieldcat_ln-tabname = 'ITAB1'.
*FIELDCAT_LN-NO_OUT = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
fieldcat_ln-key = ' '. "SUBTOTAL KEY
fieldcat_ln-no_out = ' '.
fieldcat_ln-seltext_l = 'HEAD1'.
append fieldcat_ln to gt_fieldcat.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD2'.
fieldcat_ln-tabname = 'ITAB1'.
fieldcat_ln-no_out = 'X'.
fieldcat_ln-seltext_l = 'HEAD2'.
append fieldcat_ln to gt_fieldcat.
clear fieldcat_in.
fieldcat_ln-fieldname = 'FIELD3'.
fieldcat_ln-tabname = 'ITAB1'.
fieldcat_ln-ref_fieldname = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
fieldcat_ln-ref_tabname = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
fieldcat_ln-no_out = ' '.
fieldcat_ln-do_sum = 'X'. "SUM UPON DISPLAY
append fieldcat_ln to gt_fieldcat.
DATA SORTING AND SUBTOTAL
data: gs_sort type slis_sortinfo_alv.
clear gs_sort.
gs_sort-fieldname = 'FIELD1'.
gs_sort-spos = 1.
gs_sort-up = 'X'.
gs_sort-subtot = 'X'. ***CRUCIAL STATEMENT****
append gs_sort to gt_sort.
clear gs_sort.
gs_sort-fieldname = 'FIELD2'.
gs_sort-spos = 2.
gs_sort-up = 'X'.
*GS_SORT-SUBTOT = 'X'. **THIS SHOULD NOT BE UNCOMENTED*
append gs_sort to gt_sort.
endform.
form call_alv.
ABAP List Viewer
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = g_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
i_structure_name = 'ITAB1'
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = gt_events[]
IT_EVENT_EXIT =
is_print = gs_print
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = itab1
exceptions
program_error = 1
others = 2.
endform.
HEADER FORM
form eventtab_build changing lt_events type slis_t_event.
constants:
gc_formname_top_of_page type slis_formname value 'TOP_OF_PAGE'.
*GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = lt_events.
read table lt_events with key name = slis_ev_top_of_page
into ls_event.
if sy-subrc = 0.
move gc_formname_top_of_page to ls_event-form.
append ls_event to lt_events.
endif.
define END_OF_PAGE event
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
endform.
form comment_build changing gt_top_of_page type slis_t_listheader.
data: gs_line type slis_listheader.
clear gs_line.
gs_line-typ = 'H'.
gs_line-info = 'HEADER 1'.
append gs_line to gt_top_of_page.
clear gs_line.
gs_line-typ = 'S'.
gs_line-key = 'STATUS 1'.
gs_line-info = 'INFO 1'.
append gs_line to gt_top_of_page.
gs_line-key = 'STATUS 2'.
gs_line-info = 'INFO 2'.
append gs_line to gt_top_of_page.
CLEAR GS_LINE.
GS_LINE-TYP = 'A'.
GS_LINE-INFO = 'ACTION'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
endform.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = gt_list_top_of_page.
write: sy-datum, 'Page No', sy-pagno left-justified.
endform.
form end_of_page.
write at (sy-linsz) sy-pagno centered.
endform.
PRINT SETTINGS
form print_build using ls_print type slis_print_alv.
ls_print-print = p_print. "PRINT IMMEDIATE
ls_print-no_print_selinfos = p_nosinf. "NO SELECTION INFO
ls_print-no_coverpage = p_nocove. "NO COVER PAGE
ls_print-no_new_page = p_nonewp.
ls_print-no_print_listinfos = p_nolinf. "NO PRINT LIST INFO
ls_print-reserve_lines = p_reserv.
endform.deepakb
Posts: 3
Joined: Mon Nov 17, 2003 8:18 am
Location: Mumbai

Email notifications when an eQ is sent back to original sender not firing

this is directly from a user "It’s not a big deal, but I use to get an email notification when I had a new eQ Action Item ." Was this feature depricated in 6.1? or do we need to put an SR in?
thanks,
David

Nothing blocked Prodika.EmailDomainFilters =
is blank in EnvironmentVaribles.config
--Trey

What is the cost to have email notification feature? I would like email notification when someone response to my form with attachments;so I can download them asap.

What is the cost to have email notification feature? I would like email notification when someone response to my form with attachments;so I can download them asap.

Email notifications and email receipts are available with any of our payed plans.
Andrew

Send different email notifications when a request is rejected/completed

Hi Friends,
I have developed a SOA composite in OIM 11g. And I am getting the same email notification when a request is fully completed or when it is rejected by an approver. How to send diffrerent email notification when a request is completed and when it is rejected by an approver.

There are multiple ways in which you can do it.
1. Modify your SOA composite and change the notification properties in the .task. Here change the status of the event and configure different notifications for different events.
2. Use the Request Status change plugin in OIM to send the notification and remove all notification from SOA composite.
3. Use explicit notification service in the SOA composite and attach the notification service component at appropriate places in the SOA workflow. Additionally remove the notification configuration from the .task
-Bikash

Send email notification when my question is answered by friends

Send email notification when my question is answered by friends

babowa wrote:
This is not FaceBook.
Thank goodness.....
Could be worse. It could be Twitter

How to trigger email notification when users fail to reset your password in fim 2010 r2.

Hi,
how to trigger email notification when users fail to reset your password in fim 2010 r2
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2

Hi,
How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2
Senario:I want put wrong answering to the Questions that i was during registration if i give wrong answers to the questions then a Email Notification should be trigger to Users.
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

Email notification to specific user when processing multiple files at a time

Hi
I am new to SSIS and error mail notification ,can some please provide details for my urgent and prioritized task in my project.
below is the requirement
I have a package for multiple file processing using for each file enumerator .each file having same column definition but for different
users and different name .
i have some mandatory fields to form unique id on combination
1.when files processing any data missed on mandatory fields it should alert users saying following line and fields are missing mandatory
information
2.email notification should send to respective users based on file name.
example :
file1:bitunimous.xls
file 2.oxford.xls
each file having following fields
file 1:bitunimous.xls
claim no: claimant: subclaim:
1001 abc 0
1002 abc 1
1002 abe 0
1004 0
here bitunimous.xls missed claimant value for 4th line then email needs to send to [email protected] as
line no 4 missed claimant information for unique key generation like that.
file 2.oxford.xls
claim no: claimant: subclaim:
2001 det 0
2002 pre 1
pqr 0
2004 frc
here oxford.xls missed claimno value for 3rd line then email needs to send to [email protected] as
line no 3 missed claimno information for unique key generation like that.
can anybody please provide solution
Thanks .
Ambed

You need to have a package with below work flow
1. ForEachLoop container with file enumerator to loop through files
Have variable inside loop to get the filename during each iteration. Create another variable called emailaddress, set EvaluateAsExpression property to true and set expression as
REPLACE(@[User::FileName],".xls","") + (DT_STR,20,1252) "@xyx.com"
2. Add tasks for validating data. Capture details of error on a string variable @[User::Error]
3. link a sent mail task to previous task and choose expression and constraint option. Set Constraint as On Completion and Expression as LEN(@Error) > 0
Inside Sent mail task set expression for ToLine and MessageSource properties to map to variables @[User::EmailAddress] and @{User::Error] respectively to sent notifications
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

I don't get email notifications when using find my iphone from another device.

When my husband uses the app "find my iphone" to locate my where abouts, I no longer get email notifications. He uses my user name and password. I believe he dismantled that feature somehow. Is that possible?

I think it time to change your password... or husband

Email notification when Document status changes in Solution Manager

Hi,
Is there a way to send email notification to certain people if the document status changes in Solution Manager?
For example: A notification email should be send to business user when development is complete.
When development is complete, document is set with status 'Build complete'. As soon as this status is set, we want to notify business user to test the object. Similarly on other document statuses as well.
Thanks in advance.

Hi Vikky
Check out doco 'How to: Automatic email notification' on service.sap.com.
SAP Support Infrastructure > SAP Solution Manager > Information for VARs ASPs and AHPs > Setup Documents (SP15+)
Thanks
Daniel

Why aren't administrators receiving email notifications when a draft is sent to them for review?

Greetings all - thanks for taking the time to look at this and (hopefully) answer.
First off, I'm using Adobe Contribute CS3, Version 4.
We have a couple people that are able to edit pages that need to be sent for review. When they send to an administrator for review, though, there is no email notification saying that there's a page awaiting review.
I've searched around Contribute, and can't find anywhere to turn on email notifications. Can anyone tell me where I can turn on email notifications???
Thanks!

I am having the same problem. Here is a website that might help you with your problem:
http://help.adobe.com/en_US/Contribute/5.0_Using/WS5b3ccc516d4fbf351e63e3d1180fba1e59-7fec .html
Christine Gharibian
Marketing Manager
SearchMar, Inc.
D: (415) 362.0330 | T: (866) 885.6263 | F: (415) 362.0331
870 Market Street | Suite 542 | San Francisco | CA 94102
SearchMar.com | Blog | LinkedIn | Twitter

No email notification when a thread is updated

I noticed that since weeks i am no longer receiving email notifications of thread updates.
I checked the settings in my profile and apparently they should be delivered immediately.
I also checked the spam folder without success, so it looks like these email notifications are nowhere.
For instance, i created two threads in the last days and in no case i received an email when a reply was posted.
Is anyone experiencing the same problem lately?
Flavio
http://oraclequirks.blogspot.com

I am amazed by the number of replies to this thread, so it seems i am the only one on the planet, for some reason, who does not get notified even if i chose to get notified.
Great.
http://oraclequirks.blogspot.com

Email Notification When Specific In/Outbound Queue Is Blocked

Similar Messages

Maybe you are looking for