Email Notification with no Email??!

Hi and Tnxs for reading.
On my iOS devices, iPhone and iPad, I got an email notification which is staying there although there is nothing in the incoming folder.
It never happen before. I have the red circle with a marked "1" inside and, the same number shown on the email counter in the email index. However, when selecting the incoming mail folder, it is empty. This is happening on both my iOS devices. I tried to access my yahoo mail via web and no mail are pending.
I tried to disconnect yahoo account from my iOS devices (issue fixed, disappeared), but the notification come back when I reactivate the account.
Any advice please?
Tnxs, cheers.

try this:
1. In settings turn off the offending mail account
2. Power down phone
3. Turn phone back on
4. Turn the email account back on in settings

Similar Messages

Approval notification with email

i would like to set up approval notification with email. when searching in help.sap.com i did not find the information i need. does anyone know where to find the information to configure that in approval process notifications are sent per email?

Hi Matthias,
see /thread/27876 [original link is broken]
Hope it helps
Detlev

Email notification with SP 10

Hi all,
We are using Solution Manager 7.1 SP 10 and would like to use the "new" email notification with the new standard actions. Nevertheless, it seems that is doesn't work.
Based on what we read, we should not need to create anything anymore as described here Pep Up Your ChaRM - Part 1: HowTo Create a Smart e-Mail Action as we have now 2 actions already created in standard :
But when we try the SEND_MAIL_CHANGE_MANAGER one with the following action definition :
with schedule condition :
and start condition :
SCOT / SO16 / BP are properly configured based on the following thread ChaRM: Approval Settings - Email Functionality in Change Request
No email are triggered when for instance the status is in "validation". Are we missing something ?
Thank you in advance.
Kind Regards.

Hi Vivek,
Thanks for the answer.
Of course, I have the corresponding YMCR actions created.
As it is "scheduled automatically", don't I have some kind of WF or jobs to plan ?
I assume that is not activated by default once you are in SP 10, isn't it ?
Based on the TJ30 table, my manager should received an email once the RfC is on "To be approved" or "Being implemented" status....which is not the case today...
As I am using the same user for testing the flow, I am wondering if it doesn't come from that but I doubt it.
And again, I wonder if there is not configuration to activate for these 2 actions, don't you think ?
Thank you in advance for your answer.

Log file for the workflow notification with the ID of 43533

Hi,
we are facing this error:
The notification with the ID of 43533 experienced problems when attempting to dispatch an email notification to the role ~WF_ADHOC-62. Subsequently the notification preference for the following users has been set to DISABLED. Please correct the issue and re-enable their notification preference.
so now i have to find out the log file for this notification error.I can get it under $APPLCSF/$APPLLOG directory starting with FNDCPGSC<process_id>.txt. But i dont know how to find out the process id.Can someone please assist me.
Thanks

we are facing this error:
The notification with the ID of 43533 experienced problems when attempting to dispatch an email notification to the role ~WF_ADHOC-62. Subsequently the notification preference for the following users has been set to DISABLED. Please correct the issue and re-enable their notification preference.
so now i have to find out the log file for this notification error.I can get it under $APPLCSF/$APPLLOG directory starting with FNDCPGSC<process_id>.txt. But i dont know how to find out the process id.Can someone please assist me.Please see these docs.
Notification Id / Role are not Populated in the Update User Notification Preference Update Report Notification [ID 1330619.1]
User Notification Preference Updated to DISABLED [ID 1379564.1]
Email Not Received javax.mail.SendFailedException: Invalid Addresses [ID 876835.1]
Workflow Notification Mailer is Spamming the Email Accounts of Users [ID 1293792.1]
Thanks,
Hussein

Integrate KDE notifications with Openbox?

Hi,
I'm using openbox with whole set of KDE programs (I prefer it this way over KDE with OB as WM).
Is there any way of integrating KDE notifications with OB to make it look neat?
Cheers
vi3dr0

What do you mean "integrating KDE notifications with OB" ?
If it's related to launching KDE applications from OB menu, you can have entries like that :
<menu id="apps-editors-menu" label="Editors">
<item label="Kwrite">
<action name="Execute">
<command>kwrite</command>
<startupnotify>
<enabled>yes</enabled>
</startupnotify>
</action>
</item>
</menu>
in your ~/.config/openbox/menu.xml
If it's something else, explain and give an example of what you want.

How to use notification with parallel thread

Hi,
I am learning to use Notification to communicate between thread. I still don't know how to use it. In my current project I have a case to use this so I think I should implement this technique. My example is I have a main sequence in that I make a new thread. What I want is the new thread will do a task A when receive a notfication or to exit the thread when the main sequence stop.
I am not sure if using notification is a best practice here? Or should I use a reference data?
What about if I want my thread to do task B if it receive another notification. Is notification still be helpful?
Regards,
Thang Nguyen
Solved!
Go to Solution.

Hello,
You can use Notification to handle parallel threads. I often create two sequences : one containing the process A of your example (StartProcessA). and a second one to stop this process (StopProcessA). In StartProcessA, I create a Notification, with a defined name (as string constante, "StopProcessANotifier" for instance) in the setup group. Then I have the process, in a loop. At the end of this loop, I check the Notification (Wait) with a timeout enabled, and no error if a timeout occurs. this way, the Notification Wait can be used as loop timing, and if the notification is Set in MainSequence, this exit the loop (pick a look at Notification property Step.Result.TimeoutOccured).
To sum up, use a first sequence call in MainSequence, calling StartProcessA, with NewThread option, and do not forget to call StopProcessA at the end of you MainSequence. The Cleanup group is a very good location, because it will be executed even in case of error.
This is a very simple use of Notification. Note, I believe that make it simple is often the most important but also the most complicated thing to do
Hope this helps....
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
  CTD - Certified TestStand Developer / Développeur TestStand Certifié
  CLAD - Certified LabVIEW Associate Developer

Is it ok to have a interactive notification with an action , which initiates a phone call

Is it ok to have a interactive notification with an action , which initiates a phone call

BPerlman wrote:
1. I can't choose fixed point representation when I have a dial or knob control. the "FXP" option is disabled.
2. The help tells me to set the range and desired delta, but they seem to be read only!
3. Why do you suggest a range of 0..1 and multiply by 360, rather than a range of 0..360 in the first place?
Interesting. I wasn't aware if this limitation. I guess it only works for simple controls. (Here's an idea!)
You cannot set the range and delta, they are the results of the "word lenght" and "integer word lenght". These are tightly limited by the underlying binary representation.
In this particular case, you could chose a word lenght of 12 bits and integer word lenght of zero bits, giving you an increment of exactly 1/4096 (The display is unfortunately rounded to four decimal digits and does not show the full resolution) (Here's another idea!)
LabVIEW Champion . Do more with less code and in less time .

Status ORAS in notification with no order created

I have some notifications with status ORAS (order assigned) but no PM order created (the field is blank). I am trying to fix the inconsistency with no sucess. I get a dump whatever I do in the notification.
thanks

Hi,
You can use report ZREPNOT2 from note [375789|https://service.sap.com/sap/support/notes/375789] to remove the incorrect ORAS status. Report can be used on all current releases.
-Paul

How to create a new business partner for notification with function module?

Hello,
I got a problem when I want to create a new Notification with its businiss partner (BAPI_ALM_NOTIF_CREATE). I can't find the proper way to create the new business partner. Anyone offer some help?
Thanks a lot!
Morgan

when I look at the function you can transfer the partner in NOTIFPARTNR table.
You must already have defined the appropiate partnerroll in customizing for you're businesspartner
or do you have another problem with this function ?

Create a notification with reference

Hi,
My requirement is to create a notification with reference to another notification.
How can i do that ? I tried to use BAPI_ALM_NOTIF_CREATE but I faced 2 problems:
1. I didnt know where to give the reference notification number
2. I am getting the error: "Partner maintenance: Manadatory function AG was not maintained for object"
Could anyone help me out with this ?

Hello Sasi Upadrasta
can you please explain how to solve this?
because i'm getting same error.
Thanks
Kaushik Savaliya

Create PM orders/notif with inbound IDOC

Hi all,
Anyone knows how can I create a PM order and a PM notification with inbounds IDOC?. If there are not IDOC available, it´s possible create PM order and notification trhought BAPI´s?.
Thanks in advance
Abel

Hi Abel,
Have a look at BAPI_ALM_ORDER_MAINTAIN for PM Order and BAPI_ALM_NOTIF_CREATE for PM Notification.
You can check the BAPI's from transaction code BAPI.
Hope this helps.
Thanks
Lakshman

How to implement notification with response against each order lines

We have a requirement wherein the multiple order lines should be displayed in one notificaiton and the response (Approve/Reject) should be line wise.
For exmple, if an order has 3 lines, the approver should get one notification with all 3 lines displayed in the notification. Approver should be able to approve say 2 lines
and reject the third line.
If reponse is not possible line wise, is it possible for including a drop down/checkbox/text against each line which would enable the approver to approve/reject the line and the approver response against each line should be captured.
How do we implement this?

Hello,
we are evaluating BC4J/JClient. In our application we have a navigation tree
in a Java client from which we can call nested dialogs to set attributes,
call business logic etc.
Is it possible to open more than one sub-dialog from our starting navigation tree
at the same time? Each sub-dialog should have its own transaction context.
To our knowledge we need a new application module for each sub-dialog in order
to start a new transaction. But how is the navigation tree updated if data
from the sub-dialogs is commited? The dialogs and the navigation tree don't share
the same model, do they? The navigation tree might have to show lots of data
retrieved over a slow connection, so simply updating the entire model is not a solution.
This could work if an intelligent caching fetches only the changed data.
So: What is the best way to implement sub-dialogs with their own transaction plus an
update mechanism?To create a UI like this, see the sample on OTN at
http://otn.oracle.com/sample_code/products/jdev/jclient/jclient_binding_demo.html
YOu'd have to tweak this sample so that each sub-window comes up with it's own AM (as you've right suggested).
Regarding commit, yes, if you do not want to query the whole model on the navigator, you may use Transaction.commitAndSync() method to commit changes instead of simply performing a commit() call.
See javadoc on this method for details on how it works.
Thanks for any help!

When someone modify the coding in the notification, a new notification with the same task is created (QM02)

Hi,
When someone modify the coding in the notification, a new notification with the same task is created (QM02).
How to stop this duplicate notification?
Regards,
Shiva

Hello Shivasharanappa,
This is due to your Inspection type configuration. I guess "One Q-Notification per Insp. Lot" Indicator is not set for the inspection type you are using.
Go to QCC0>Quality inspection>Inspection Lot Creation>Maintain Inspection Types>Select Inspection type
Here, Set indicator for "One Q-Notification per Insp. Lot". If this indicator is set system will combine all newly added defects into previously created notification.
Amol.

[SOLVED] Actions in notifications with notify-send

Using notify-send, is there a way to associate a notification with some action (e.g. execution of a script) when clicking on it? Or is it possible to include a button within the notification? To better understand what I mean, please have a look the below image depicting a notification sent by Rhythmbox that contains some buttons.
Last edited by ibes (2013-11-16 08:00:58)

You might be interested in "dunstify" which is a part of the dunst daemon, but is not installed with the AUR package. It is a more fleshed out interface for libnotify than notify-send.
dunstify -A yes,ACCEPT -A no,DECLINE "Call waiting"
https://github.com/knopwob/dunst
Last edited by progandy (2013-11-15 21:31:33)

Notification with 'CCNO_CREATE_ECR' functional module

Hello All,
Need to check a Configuration Setting related to Notification with you. I have created a ZE Notification Type (General Notification). With help of IMG, within this ZE Notification, I have created an Action Box with functional module 'CCNO_CREATE_ECR'. Under the Control Data in the Usage and Documentation, I have put u2018Any View (create,change)u2019, u2018Notification and Tasku2019 and Documentation as u2018Tasku2019. It is not letting me use u2018Noneu2019 as Documentationu2019 for this functional module.
As a result whenever I create an ECR from within the Notification from the action box, it logs it as a Task, below the Task tab in the Notification.
I want to avoid documenting/logging this as a Task whenever I create ECR from within Notification. Can someone kindly help with this.
Thanks,
Sachin

Sachin,
whenever you call action box item system will logged in TASK
you can rename the TASK tab as ECR --- so whenever you call action box item -- sytem will logged
under ECO,
but if you have lot of action box items (other than ECR's) --- then all are logged under ECR
or
if you don't want TASK tab to be displayed in NOtification, you can remove in this from configuration
under Quality notification -screen/tab's
let me know if have an issue
Thanks
Sami

Change Notification with C#

I am trying to get a test application to work using Oracle Change Notification with C#, but I am not receiving the callback notification in my application. Oracle DB version is 11.2.0.1.0. Oracle.DataAccess v.2.112.30. I can confirm the query gets registered in Oracle by viewing SYS.USER_CHANGE_NOTIFICATION_REGS and SYS.USER_CQ_NOTIFICATION_QUERIES. However, nothing ever appears in SYS.DBA_CHANGE_NOTIFICATION_REGS.
The registration persists until I commit a transaction on the table. The registration disappears after a few seconds after the commit and my application does not received the notification.
I have made sure my computer is listening on the correct port and have even tried turning off any firewall that could be blocking the port.
I do have GRANT CHANGE NOTIFICATION to MYSCHEMA, GRANT EXECUTE ON DBMS_CHANGE_NOTIFICATION TO MYSCHEMA, and the JOB_QUEUE_PROCESSES is set to 1.
Questions:
1) Should the registration be visible in SYS.DBA_CHANGE_NOTIFICATION_REGS and, if so, what could be causing it not to be when it is visible in SYS.USER_CHANGE_NOTIFICATION_REGS and SYS.USER_CQ_NOTIFICATION_QUERIES?
2) What could be causing the registration to disappear after a commit?
3) What could be causing the failure of the notification to my application?
Here is the C# code I am using and it is basically the same as from the Oracle website:
using System;
using System.Threading;
using System.Data;
using Oracle.DataAccess.Client;
namespace NotifyTest
public class Program
public static bool IsNotified = false;
public static void Main(string[] args)
string constr = "User Id=mySchema;Password=myPassword;Data Source=myOracleInstance";
OracleDependency dep = null;
try
using (var con = new OracleConnection(constr))
Console.WriteLine("Registering query...");
var cmd = new OracleCommand("select * from mySchema.NOTIFY_TEST", con);
con.Open();
OracleDependency.Port = 1005;
dep = new OracleDependency(cmd);
dep.OnChange += OnMyNotificaton;
int queryRegistered = cmd.ExecuteNonQuery();
// If oracle returns -1, then the query is successfully registered
if (queryRegistered == -1)
Console.WriteLine("Query Registered...");
Console.WriteLine("Listening for Callback...");
else
Console.WriteLine("There was an error...");
catch (Exception e)
Console.WriteLine(e.Message);
// Loop while waiting for notification
while (IsNotified == false)
Thread.Sleep(100);
public static void OnMyNotificaton(object sender, OracleNotificationEventArgs arg)
Console.WriteLine("Table change notification event is raised");
Console.WriteLine(arg.Source.ToString());
Console.WriteLine(arg.Info.ToString());
Console.WriteLine(arg.Source.ToString());
Console.WriteLine(arg.Type.ToString());
IsNotified = true;
}

Just wanted to provide an update as to how I resolved this issue. I changed my Oracle.DataAccess.dll from v.2.112.3.0 to v.2.112.1.2 and it works fine.

Email Notification with no Email??!

Similar Messages

Maybe you are looking for