Email notifications, email notifications

my email preferences are all set to NO but I still get emails alerts for every update to a thread I posted in.
Anyone any suggestions? Apple tech can you assist?
thx
Russell

https://discussions.apple.com/docs/DOC-3661

Similar Messages

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

Facebook Notifications and email notifications on ...

Hi
Is that possible Facebook Notifications and email notifications on sleeping screen nokia 808 like it had on N9..
On my 808 it shows only msgs and miscalls....any fix??
Thanks

not possible unless the app supports that behaviour. but email notifications and on notification lights has been broken on Symbian for a while, and as Symbian is in maintenance mode, is unlikely to see a fix, possibly ever.

Subscriptions and email notifications

Is there a way to subscribe simply to a single question I post rather than to the entire topic, which results in tons of emails? Or is there a way (as with Mozilla forums) to be notified when a response is made to a thread I post?

Something seems to be broken in discussion subscriptions. Every morning I get a notification that the same thread has been updated, but it has not. Let me paste in a portion of the messages. Please note the dates are different but the link remains the same (with the same messageID):
====
The following updates have been made since 1/11/07 6:19 AM
Topic "No System Sounds" has been updated one time
http://discussions.apple.com/thread.jspa?messageID=3866231#3866231
====
The following updates have been made since 1/10/07 6:19 AM
Topic "No System Sounds" has been updated one time
http://discussions.apple.com/thread.jspa?messageID=3866231#3866231
====
The following updates have been made since 1/9/07 6:19 AM
Topic "No System Sounds" has been updated one time
http://discussions.apple.com/thread.jspa?messageID=3866231#3866231
PowerMac G3 (Blue & White), iBook G3, MacBook Pro Mac OS X (10.4.8)

CWMS and email notifications

We are in the planning stages for deploying cwms. In documentation, the various email templates are described briefly.
Is there further resource on the templates? For example, what is customer modifiable? How are we limited - only certain sections of the MSG, can we incorporate simple graphics, is there a character count limit? Are there any examples of the templates available?
Thank you for any info in advance.
John Geyer
Sent from Cisco Technical Support iPhone App

Hi John,
Essentially everything in the template is modifiable, and while there may be a character count limit, it is unlikely that any modifications will encounter that as notifications with hundreds of full lines of html and text can be delivered by the system.
There are two types of templates, one for normal web scheduling that can be in either HTML or plain text, and one for meetings scheduled through productivity tools that only uses a plain text notification.
Here is an example of a HTML notification that attendees receive:
Hi %AttendeeName_HTML%,
%HostName_HTML% is inviting you to this WebEx meeting:
%Topic_HTML%
Host: %HostName_HTML%
When it's time, join the meeting from here:
Join the meeting
When: %MeetingDateOrRecurrence%, %MeetingTime%, %TimeZone%.
Access Information
Meeting Number:
%MeetingNumber%
Password:
%MeetingPassword_HTML%
Audio Connection
%TeleconferencingInfo_HTML%
Delivering the power of collaboration
The %SiteURL_HTML% team %Support_HTML%
%CustomFooterText_HTML%
© %Year% Cisco and/or its affiliates. All rights reserved.
While the plain text version that PT would send looks like this:
%Topic%
Host: %HostName%
When it's time, join the meeting from here:
%Meeting Link%
Access Information
Meeting Number:
%Meeting Number%
Password:
%Meeting Password%
Audio Connection
%TeleconferencingInfo%
Delivering the power of collaboration
The %SiteURL% team
%Support%
%CustomFooterText%
In the HTML version, images can be linked to and added to the notifications with normal HTML tags. There are also system variables such as %Meeting Password% and %SiteURL% that are filled in at the time the notification is generated. While many of them are self-explanitory, a comprehensive list of the variables and descriptions are not available. I'll see if this can be included into the notifications section of the Administration Guide.
Thanks,
Derek Johnson
Conferencing TAC

8830 and Email Notifications

Does anyone know of a way to shut off the email message indicator and the new mail (with star indicator) w/o affecting the email push? Ie: When I get home at night, I don't want to see how many messages I have or even the indicator that there is new messages because I feel compelled to look at it. I have tried turning both off, but you either have one showing or the other.
Thanks.

Hey emma53,
Welcome to the forums !
Are you still having this issue? If so then you may to try to back up and complete a clean reload of the device software as shown here http://bbry.lv/cG8oer. Before you restore your data test to see if the notifications are back.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Procedures and Email Notifications

boldEN*bold*
Hi everyone!!
In my BPM development, i'm trying to automatize the email notifications, based on due process periods. Also, I need to inform, based on the delay, some other participants that escalates the alarm message.
Is it possible to do it using an "E-Mail Notification" component that can be reused during all the process, even that the interval conditions and informed users varies upon each activity.
Is there another way to solve it?
Thanks
boldSP:*bold*
Saludos a todos!
En mi desarrollo BPM requiero automatizar el proceso de envio de email, al caducar ciertas actividades. Basado en ello, el tiempo de caducidad varia de acuerdo a cada actividad y al usuario, ya que varian tanto los intervalos de aviso, como los correos y su escalamiento en caso de demoras mayores a lo solicitado.
Pienso que es posible tomar un procedimiento especializado que permita ser reutilizado en este y otros proyectos, a pesar de que requiera parametrizar tanto los usuarios "base" y "escalados", como los intervalos de alarmas, durante el proceso.
¿ Existe otra forma de realizarlo?
Gracias,

I think I understand what you're after. I think you want to use the same escalation logic for all of your processes and instead of embedding this in every process you want something reusable. If this is not the case, read no further.
While you can do this, there are still going to be 5 things each process would still need to have inside of them:
<li> your process would need to set the "deadline" predefined variable to the intial timeout (2 hours in the future in your example)
<li> your process would need an Exeption Handler needs to be added with an Exception transition set to "Instance Expiration"
<li> your process would need an Integer instance variable "alertLevel" to keep track of the current level
<li> your process would need a String instance variable "currentlyAssignedTo" to keep track of who's supervisor you want to notify
<li> your process would need an Automatic activity with one line of logic inside it.
You could have the Exception transition leaving the Exception Handler activity go to a subprocess using a Subflow activity. This subprocess would send the emails, determine the new deadline interval, determine the new priority of the instance, look up the currently assigned user, manager and supervisor's email addresses and send the email(s). The subflow would have two input argument variables (alertLevelArg and currentlyAssignedToArg). In the Begin activity, these arguments would be mapped to corresponding instance variables. Inside this subprocess there would be an automatic with the logic to send the email to the user / manager / supervisor based on the alertLevel instance variable. This subprocess would pass back out through its output argument variables the new alertLevelArg, and new deadline (a time argument variable set to some time in the future based on the new alert's level).
Once the instance in the called subprocess completes, the output arguments need to be mapped to the original process's "alertLevel" and "deadline" variable. From the Subflow activity, you'd have an unconditional activity that flows into an Automatic activity via an unconditional transition. This automatic activity would have the single line of logic "action = BACK" so the instance is sent back from the Exception Hanldler's flow back to the activity inside the process it was in when the Instance Expiration exception occurred.
Avoid hard coding the values of "2" and "5" and "8" for the number of hours to have elapse inside your logic. Instead make them business parameters capable of being edited by an business owner.
Dan

Ringtones and email notifications!

I just got the droid razr yesterday (it's also my first smartphone) and I can't figure out how to get ringtones! My husband has a plain phone and sent me ringtones but when I open them they play the music but there is nothing under options saying use as ringtone. I have no music downloaded on my phone at all to use. Also I keep getting notifications every time I get a new email in my yahoo account. I want to keep yahoo on my phone but I don't want all the notifications every time i get mail cuz most of it is junk! Thanks!!!!!!

mrs.snook0903 wrote:
I just got the droid razr yesterday (it's also my first smartphone) and I can't figure out how to get ringtones! My husband has a plain phone and sent me ringtones but when I open them they play the music but there is nothing under options saying use as ringtone.
If you long press the ringtone it should give you a list of options you can then go one of two ways. Option one is "set as" and then choose ringtone. Option two (what I usually do) is to save then, using your computer (plug your phone in via USB) or a file manager app from the market, create a folder named media, then inside that, folders named ringtones, notifications, and alarms and move the file to the appropriate place (it should be in a folder named download originally). It should now show up in the list when you go to set a ringtone in the normal way.
I have no music downloaded on my phone at all to use. Also I keep getting notifications every time I get a new email in my yahoo account. I want to keep yahoo on my phone but I don't want all the notifications every time i get mail cuz most of it is junk! Thanks!!!!!!
There may be an option to show the notification without a sound or there may be a "silent ringtone". If not, you should be able to find a silent ringtone online and set it in the way I described above. You may also be able to set it to check less often or only when you open the mail app.

Email and BBM Notifications

I just got a replacement phone and I get sounds notifications for both email and BBM that I want to adjust or turn off. That said, when I go to the "notifications" area of "System Settings" and scroll down to "Applications" I do not have either "Email" or "BBM" listed in there. I checked a friends phone and he has them in there, and we have the same phone and software version.
Would appreciate any idea of where to go to change these settings (not in HUB management I looked there) as well as why these two would not be listed in that area.
Thanks

If you haven't tried a reboot, or a reset, do it and then check again. Personally, I would reboot first, then try soft reset if reboot doesn't fix it.
See http://www.blackberry.com/btsc/KB02141
- Ira

Email and sms notifications

One feature I would like to see on the iPhone is the ability to control its behavior based on external factors.
For example,
- At night I want my phone to shut up. No email or sms notifications, and to only ring if call is from someone I care about.
- When I have wifi I want it to check for emails frequently, but when I am using 3G I want to check manually (my SP charges for email traffic)
As a result, I am forced to choose the least common denominator - always check email manually, and never notify on new email or sms.
As far as I can tell, there is no way to do this automatically (sure, I can go into settings each time, but what a pita).

http://www.apple.com/feedback/iphone.html

Emails and facebook notifications ...

Hi,
I've had my blackberry bold 9700 since the 11th June. Since then i've had troubles reciving emails and facebook notifications. Sometimes they come though but not for a good 15 mins - 1 hour and sometimes they don't even come through at all! does anyone know what i need to do? i tried a new hanset still didnt do it, rang o2 they dont know as all settings are right their end.. anyone? thanks

So you're not getting any data transfer to device, except when Google Maps is running?

Text and email notifications

Help.I have lost the blackberry tone for email and text notifications. I cannot find where to get it back. Pearl flip 8230.

Hey emma53,
Welcome to the forums !
Are you still having this issue? If so then you may to try to back up and complete a clean reload of the device software as shown here http://bbry.lv/cG8oer. Before you restore your data test to see if the notifications are back.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to set up notification email for Full CPU utilization on OEM12c?

I have found a Oracle Doc,Is that's the way email notifications are setup?How can i check that after setting the notifications?
4.1.2.3 Subscribe to Receive E-mail for Incident Rules
An incident rule is a user-defined rule that specifies the criteria by which notifications should be sent for specific events that make up the incident. An incident rule set, as the name implies, consists of one or more rules associated with the same incident.
When creating an incident rule, you specify criteria such as the targets you are interested in, the types of events to which you want the rule to apply. Specifically, for a given rule, you can specify the criteria you are interested in and the notification methods (such as e-mail) that should be used for sending these notifications. For example, you can set up a rule that when any database goes down or any database backup job fails, e-mail should be sent and the "log trouble ticket" notification method should be called. Or you can define another rule such that when the CPU or Memory Utilization of any host reach critical severities, SNMP traps should be sent to another management console. Notification flexibility is further enhanced by the fact that with a single rule, you can perform multiple actions based on specific conditions. Example: When monitoring a condition such as machine memory utilization, for an incident severity of 'warning' (memory utilization at 80%), send the administrator an e-mail, if the severity is 'critical' (memory utilization at 99%), page the administrator immediately.
You can subscribe to a rule you have already created.
From the Setup menu, select Incidents, then select Incident Rules.
On the Incident Rules - All Enterprise Rules page, click on the rule set containing incident escalation rule in question and click Edit... Rules are created in the context of a rule set.
Note: In the case where there is no existing rule set, create a rule set by clicking Create Rule Set... You then create the rule as part of creating the rule set.
In the Rules section of the Edit Rule Set page, highlight the escalation rule and click Edit....
Navigate to the Add Actions page.
Select the action that escalates the incident and click Edit...
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/notification.htm#CACHDCAD

Make sure you have correct thresholds...
from target home>monitoring>"Metric and Collection Settings"
Check the incident rule for warning and critical events for host targets
Setup>Incident>Incident Rules

How to cancel email notifications in ical?

Please help.
I share a work calendar with a colleague via ical and syncing via mobile me.
When I as the "owner" of the calendar send or update an event in ical my colleague recieves an email notification.
I update the calendar many times each day and each time an email notification is recieved by my colleague in mac mail....this is proving very boring and unnecessary and meaning he is getting more than 50 emails a day referring to our shared calendar .
Is there any way to cancel these email notifications as we always have our calendars open and can see the updates / changes?
Many thanks

I have the exact same problem. No one out there with a solution??
thanx

OIM - Email notification to a specific user based on a dynamic rule

Hello, After creation of account in a particular target resource I need to send an email to a specific user based on the location of the user (e.g area admin).
In the notification tab of process tasks, I see only "Assignee", "Requestor", "User", "User Manager"? How can I achive the above specified requirement?
Before posting this question, I tried to search the forum for any previous posts related to this. But I couldn't find any. May be I was not searching with right key words.
Any help is appreciated. Thanks in advance.

You'll need to custom code an adapter to send the email, then you can send to any user you want. Create a new task and trigger it off the completion response code. You can use the following apis:
tcEmailNotificationUtil sendMail = new tcEmailNotificationUtil(ioDatabase);
sendMail.setBody("Type your body here or use a string variable");
sendMail.setSubject("Type your subject here or use a string variable");
sendMail.setFromAddress("[email protected]");
sendMail.sendEmail("[email protected]");
Just populate the above pieces with the information needed.
-Kevin

Cannot Send Email Notification Using Stored Procedure.

Hi Friends,
I tried to execute this job scheduler...
begin
dbms_scheduler.create_job(
job_name => 'ILMS_JOB_SCHEDULE'
,job_type => 'PLSQL_BLOCK'
,job_action => 'begin ilms.check_reminder(); end; '
,start_date => SYSTIMESTAMP
,repeat_interval => 'FREQ=DAILY'
,enabled => TRUE
     ,end_date => NULL
,comments => 'Ilms job schedule for notification.');
end;
However, since the effect is too long I rescheduled the frequency to be every one minute in this set attribute...
BEGIN
DBMS_SCHEDULER.SET_ATTRIBUTE(
          name => 'ILMS_JOB_SCHEDULE'
          ,attribute => 'repeat_interval'
          ,value => 'FREQ=MINUTELY;INTERVAL=1'
DBMS_SCHEDULER.DISABLE('ILMS_JOB_SCHEDULE');
DBMS_SCHEDULER.ENABLE('ILMS_JOB_SCHEDULE');
END;
Check Reminder is the stored procedure invoked by job scheduler to check values in database columns before sending email notification to the respective recipients' email address and also the format of the email notification to be sent to the recipients...
CREATE OR REPLACE PROCEDURE check_reminder AS
NO number;
CURSOR emp_cur is
select * from pergerakan_ks where TASK_FLAG=7 and TASK_STATUS='InProgress';
emp_rec emp_cur%rowtype;
email_to varchar2(200);
default_email varchar2(200);
mesg varchar2(4000);
no_kes varchar2(100);
subj varchar2(4000);
kpi number;
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
BEGIN
default_email:='@abc.com.my';
FOR emp_rec in emp_cur
LOOP
if emp_rec.PKS_TKH_TERIMA is null then
dbms_output.put_line('count day ' || round(sysdate - to_date(emp_rec.pks_tkh_hantar)) || crlf || crlf);
if round(sysdate - to_date(emp_rec.pks_tkh_hantar)) >3 then
email_to:=emp_rec.pks_penghantar_id||default_email;
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
dbms_output.put_line('update old pergerakan pks_id : '||emp_rec.pks_id);
update pergerakan_ks set task_status='Done' where pks_id=emp_rec.pks_id;
dbms_output.put_line('insert new pergerakan ks : ');
insert into pergerakan_ks(pks_id,pks_ks_id,pks_km_id,pks_penghantar_id,pks_tkh_hantar,
pks_penerima_id,pks_tkh_terima,task_name,task_owner,task_status,task_flag,fb_id)
values(pks_id_seq.nextval,emp_rec.pks_ks_id,emp_rec.pks_km_id,
emp_rec.pks_penghantar_id,sysdate,
null,
null,emp_rec.task_name,
emp_rec.pks_penghantar_id,
'InProgress',6,emp_rec.fb_id);
commit;
e_mail_message(email_to,email_to,subj,mesg);
end if;
end if;
if emp_rec.PKS_TKH_TERIMA is not null then
dbms_output.put_line('emp_rec.pks_km_id ' || emp_rec.pks_km_id || crlf);
select c.KM_KPI into kpi from keluar_masuk_ks c where c.KM_ID = emp_rec.pks_km_id;
no := round(sysdate - to_date(emp_rec.pks_tkh_terima))-kpi;
dbms_output.put_line('count day - kpi' || no || crlf);
dbms_output.put_line('kpi ' || kpi || crlf);
if no = 1 then
email_to:=emp_rec.pks_penghantar_id||default_email;
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
email_to:=emp_rec.task_owner||default_email;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
e_mail_message(email_to,email_to,subj,mesg);
e_mail_message(email_to,email_to,subj,mesg);
end if;
if no = 3 then
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
email_to:=emp_rec.task_owner||default_email;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
e_mail_message(email_to,email_to,subj,mesg);
end if;
end if;
END LOOP;
END;
E_mail_message is the stored procedure invoked by the check_reminder to tell scheduler information of the connection and the email address of the recipients...
CREATE OR REPLACE procedure
e_mail_message
from_name in varchar2,
to_name in varchar2,
subject in varchar2,
message in varchar2
is
l_mailhost VARCHAR2(64);
l_from VARCHAR2(64);
l_to VARCHAR2(64);
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
l_mail_conn UTL_SMTP.connection;
mesg VARCHAR2( 4000 );
BEGIN
select a.SERVER into l_mailhost from email_setting a where a.SERVER is not null;
select a.USERNAME into l_from from email_setting a where a.SERVER is not null;
--UTL_SMTP.open_data(l_mail_conn);
mesg:= 'Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || crlf ||
'From: <'||l_from||'>' || crlf ||
'Subject: ' ||subject|| crlf ||
'To: '||to_name || crlf || '' || crlf ;
mesg:=mesg||message;
l_mail_conn := UTL_SMTP.open_connection(l_mailhost, 25);
UTL_SMTP.helo(l_mail_conn, l_mailhost);
UTL_SMTP.mail(l_mail_conn, l_from);
UTL_SMTP.rcpt(l_mail_conn, to_name);
UTL_SMTP.data(l_mail_conn, mesg);
UTL_SMTP.quit(l_mail_conn);
END;
I tried to execute to execute the e_mail_message procedure but received this error. Also, no notification sent to the email address...
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 99
ORA-06512: at "SYS.UTL_SMTP", line 241
ORA-06512: at "ILMS.E_MAIL_MESSAGE", line 33
ORA-06512: at line 13
Please help so that I can receive the email notification into my email...thanks in advance for your time..

user13281540 wrote:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 99
ORA-06512: at "SYS.UTL_SMTP", line 241
ORA-06512: at "ILMS.E_MAIL_MESSAGE", line 33
ORA-06512: at line 13This is not an Oracle error - this is the mail server saying "+hey, I don't like that e-mail address you are supplying, I'm not accepting it!+".
If you look at RFC821 (Request For Comments memo 821 describes the SMTP specifications), you'll see that the sender and recipient needs to be supplied in the format +<[email protected]>+, e.g. +<[email protected]>+.
I have found that not all SMTP servers are equal in this regard. Some may insist on the brackets around the address, some may not.
You need to confirm the format of the addresses you use in the "+MAIL FROM+" and "+RCPT TO+" commands.. and ensure that these formats are accepted by your SMTP server - and if not, change your code to use an acceptable format.
The easiest way to do this is using telnet - and interacting directly and manually with the server. SMTP is a clear text protocol and easy to use manually. Try it. It is the best way to test SMTP interaction and validate the approach and SMTP commands and arguments used by your code.

Email notifications, email notifications

Similar Messages

Maybe you are looking for