Email on E75 is not working

I just purchased my E75 about 2 months ago and was able to set up my hotmail account with ease. I was receiving my emails until about a few weeks ago. Now, I can't even connect my mailbox, much less sync it. I've tried downloading the latest software, and even deleted and set up my hotmail account on my phone again, but to no avail so far.
it's getting annoying so HELP PLEASE.

I am actually having the same problem with email notifications on my GMAIL account.
Weeks ago I set it up correctly and it had been working fine for weeks: every 5 minutes tha email application would login to my GMAIL account in IMAP mode, download all new emails and shoe a notification (with unread email) on my home screen. Then I changed country for two weeks so I put in another sim and disabled the automatica check (I have no data plan for this other sim) and when I came back inmy country and put backmy origional sim, the email application started behaving weirdly: application is not checking automatically; I have to check manually but then it takes too long and after that application stops working; I need to physically kill the application using the task manager and run it again manually...
And btw, I have reinstalled totally the new phones' software with no luck
Weird, really weird...

Similar Messages

I changed my email because I deleted the other one and I also forgot my security answers so I send a reset to my new email but it's not working it's going to the old one how do I send it to my new email

I changed my email because I deleted the other one and I also forgot my security answers so I send a reset to my new email but it's not working it's going to the old one how do I send it to my new email

You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(91761)

HT1277 I just got my macbook air and i thought i'd set up my email but it is not working and I do not understand anything on the website. I have a gmail account if that helps.

I just got my macbook air and i thought i'd set up my email but it is not working and I do not understand anything on the website. I have a gmail account if that helps.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

For some days imessage does not work, neither on ipad nor on iphone. also email on iphone does not work.

for some days imessage does not work, neither on ipad nor on iphone. also email on iphone does not work.

Hello Redpanda68,
The following article provides information and troubleshooting steps that can help get Messages and Mail working.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Cheers,
Allen

Lion software not very happy, cannot receive email, also boxes box not working anymore

Either boxee and email, the printer are not working since I download lions software
an apple people are nor able to resolved it
and it's a lot of trouble to bring back the other version I has
nor very happy
Richard

Hi Richard, asking this to be moved to the Lion/10.7 area... good luck!

Email Setup Application Does Not Work After Update

I seem to be having the same problem as others with the email setup application.
When I updated my Blackberry to the new OS6, I went to my email setup and it said "looking for updates"
It finds a new update from my already installed email setup app 6.0.0 to the new 6.11.0419.0755.
When I click "download" it says replace existing version? I click "yes"
The it says: "com.rim.bis.client" contains a different version of module "net_rim_bis_client" which is also used by email setup application. If you proceed, "email setup application" may cease to function properly. proceed?
If I click "yes proceed" it crashes my blackberry and it will not reboot and I have to do a complete hard reboot, wipe the device and reload everything from my backup on blackberry desktop.
If I click "no" not to proceed, I cannot open the email setup application.
I have tried downgrading to version 5 of the OS, I have rebooted with a battery pull, crashed my blackberry twice and spent hours reloading all my applications and systems. I am at the end of my rope, and I don't know what else to do?!
If there was a way to turn off the automatic search for updates on my device under the setup and email settings, i think I would be able to set it up in the older version 6.0.0
HELP.

yep same problem here
i had this problem and got a replacement handset.
i have had to do an update and got the same issue yet again.
The funny thing is, is when i got my new handset i had to run the email setup application and it worked fine.
now its failed and i have to boot in safe mode and wipe etc.
Will someone sort this out???!! O2, Blackberry whoever. Shambles!

Email Notification Script is Not Working in Windows Server 2012..

Dears
I have Server 2012 and I wants to make new task seclude for email notification, while any user is login to the
server the server will send notification email about user name and IP address for the user, I have script it is working fine in windows 2008 and it is xml file, but the script is not working in 2012 because in task schedule in windows 2008 there is an option
called send email but in windows 2012 this option is deprecated, I’m using start program to run the script in PowerShell instead of send email and I configured as an
end-MailMessage
-From [email protected]
-Subject "Email Notification"
-To [email protected]
-SmtpServer mail.domainName.com
But when I use this PowerShell I only receive email notification without any name and IP address, kindly I need
your support and help, I’m using below script.
<?xml version="1.0" encoding="UTF-16"?>
< Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-11-27T11:16:32.3962177</Date>
<Author>Company Name\User Name</Author>
<Description>RDP Login V1</Description>
</RegistrationInfo>
<Triggers>
<EventTrigger>
<Enabled>true</Enabled>
<Subscription><QueryList><Query Id="0" Path="Security"><Select Path="Security">*[System[(EventID=4624)]] and *[EventData[Data[@Name='LogonType'] and (Data=10)]]</Select></Query></QueryList></Subscription>
<ValueQueries>
<Value name="IpAddress">Event/EventData/Data[@Name="IpAddress"]</Value>
<Value name="TargetUserName">Event/EventData/Data[@Name="TargetUserName"]</Value>
</ValueQueries>
</EventTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>Company Name\User Name</UserId>
<LogonType>Password</LogonType>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<SendEmail>
<Server>Name of the Server.com</Server>
<Subject>RDP Login V1</Subject>
<To>Sender Name</To>
<From>Any Email.com</From>
<Body>Login Alert on ServerName IP : $(IpAddress) User: $(TargetUserName). Please take necessary action</Body>
<HeaderFields />
</SendEmail>
</Actions>
< /Task>

Dears
I have Server 2012 and I wants to make new task seclude for email notification, while any user is login to the
server the server will send notification email about user name and IP address for the user, I have script it is working fine in windows 2008 and it is xml file, but the script is not working in 2012 because in task schedule in windows 2008 there is an option
called send email but in windows 2012 this option is deprecated, I’m using start program to run the script in PowerShell instead of send email and I configured as an
end-MailMessage
-From [email protected]
-Subject "Email Notification"
-To [email protected]
-SmtpServer mail.domainName.com
But when I use this PowerShell I only receive email notification without any name and IP address, kindly I need
your support and help, I’m using below script.
<?xml version="1.0" encoding="UTF-16"?>
< Task version="1.2" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-11-27T11:16:32.3962177</Date>
<Author>Company Name\User Name</Author>
<Description>RDP Login V1</Description>
</RegistrationInfo>
<Triggers>
<EventTrigger>
<Enabled>true</Enabled>
<Subscription><QueryList><Query Id="0" Path="Security"><Select Path="Security">*[System[(EventID=4624)]] and *[EventData[Data[@Name='LogonType'] and (Data=10)]]</Select></Query></QueryList></Subscription>
<ValueQueries>
<Value name="IpAddress">Event/EventData/Data[@Name="IpAddress"]</Value>
<Value name="TargetUserName">Event/EventData/Data[@Name="TargetUserName"]</Value>
</ValueQueries>
</EventTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>Company Name\User Name</UserId>
<LogonType>Password</LogonType>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>IgnoreNew</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>true</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>false</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>true</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<SendEmail>
<Server>Name of the Server.com</Server>
<Subject>RDP Login V1</Subject>
<To>Sender Name</To>
<From>Any Email.com</From>
<Body>Login Alert on ServerName IP : $(IpAddress) User: $(TargetUserName). Please take necessary action</Body>
<HeaderFields />
</SendEmail>
</Actions>
< /Task>

ADOBE LiveCycle Designer 8 - EMAIL SUBMIT BUTTON DOES NOT WORK

I created a new form in Adobe LiveCycle Designer 8, but the email submit button, nor a regular button assigned with a 'submit' function will do anything. It should initiate a new Outlook email but it does not. My default programs are set correctly (default email program and the default "mailto" program are set to Outlook). This document was created not only with ALC8, but on a Windows Vista PC with MS Office 2007. I ran a test to see if it would work on a WinXP SP2 machine with Office 2003 and it still did not work.
Can anyone help?

Alan
Though not an expert, I've created a few forms with the Submit by Email button. If you've already done this then sorry for asking, but did you go through the Acrobat Distribution (Forms>Distribute Forms)process after creating the form in LC8? As far as I can tell the email submit button doesn't work without this stage.
This confirms the email submission address, then sets up a dataset to be saved in a location of your choice.
filename_dataset_0001.pdf
then a file type that can be edited, saved and submitted by Reader users:
filename_pub_0001.pdf
You can save this to your intranet server or email direct to the recipient.
When the submit button is then used you receive a copy of the whole form which on opening will prompt you to add it to the dataset. Receiving and adding multiple forms to the data set is straightforward. You will see them all listed in the viewer above the form itself. From here you can also then select and export the data to Excel via xml or as a csv file.
Note that any changes you make to the form should be to the original document and the distribution process repeated, otherwise the functionality of the form will be affected.
That's about the limit of my knowledge I'm afraid, therefore if you have already tried this and are still having problems then hopefully someone else can help out.
Regards

Email sound notification is not working

As the title says, My email notification is not working (in a non-quiet mode) the vibration works in both modes. I have changed the sounds just to see if it makes a difference, but no. Everything else works, txt msgs, FB, etc ... Any ideas?
I have turned sounds off and on and anything else I can think of.
Thanks

You may still be within 90 days of purchase, where you have access to Apple telephone support. If so, you might want to contact them.

PHP email form with Validation - not working

Hello;
I am new to using php. I usually use coldfusion or asp but this site requires me to write in php. I have a form I am trying to get to work and right now.. it doesn't do anyhting but remember what you put in the fields. It doesn't want to send, and it won't execute the validation script for the fields that are required. Can anyone help me make this work? I'm confused and a definate newbie to PHP.
Here is my code:
<?php
              $PHP_SELF = $_SERVER['PHP_SELF'];
              $errName    = "";
              $errEmail    = "";
              $errPhone    = "";
              if(isset($_POST['submit'])) {
                      if($_POST["ac"]=="login"){
                    $FORMOK = TRUE;    // $FORMOK acts as a flag. If you enter any of the conditionals below,                             // it gets set to FALSE, and the e-mail will not be sent.
                    // First Name
                    if(preg_match("/^[a-zA-Z -]+$/", $_POST["name"]) === 0) {
                        $errName = '<div class="errtext">Please enter you name.</div>';
                        $FORMOK = FALSE;
                    // Email
                if(preg_match("/^[a-zA-Z]\w+(\.\w+)*\@\w+(\.[0-9a-zA-Z]+)*\.[a-zA-Z]{2,4}$/", $_POST["email"]) === 0) {                                                    $errEmail = '<div class="errtext">Please enter a valid email.</div>';
                        $FORMOK = FALSE;
                    // Phone
                    if(preg_match("/^[a-zA-Z -]+$/", $_POST["phone"]) === 0) {
                        $errPhone = '<div class="errtext">Please enter your phone number.</div>';
                        $FORMOK = FALSE;
                    if($FORMOK) {
                            $to = "[email protected]";
                            $subject = "my. - Contact Form";
                            $name_field = $_POST['name'];
                            $email_field = $_POST['email'];
                            $phone_field = $_POST['phone'];
                            $city_field = $_POST['city'];
                            $state_field = $_POST['state'];
                            $message = $_POST['comment'];
                            $message = "
                            Name: $name_field
                            Email: $email_field
                            Phone: $phone_field
                            City: $city_field
                            State: $state_field
                            Message: $message";
                            $headers = 'MIME-Version: 1.0' . "\r\n";
                            $headers .= 'Content-type: text/html; charset=iso-8859-1' . "\r\n";
                            // Additional headers
                            $headers .= 'To: <[email protected]>' . "\r\n";
                            $headers .= '[From] <$email_field>' . "\r\n";
                            // Mail it
                            mail($to, $subject, $message, $headers);
                            header("Location: thankyou.php")
                            // I have no idea what these next 3 lines are for. You may just want to get rid of them.
ini_set("sendmail_from","[Send from]");
ini_set("SMTP","[mail server]");
mail($to, $subject, $message, $headers);
                            } else {
                            echo "Error!";
                    ?>
<form method="post" action="<?php $PHP_SELF ?>" id="commentForm">
<input name="name" size="40" value="<?php echo $_POST["name"]; ?>" type="text">
                     <?php if(isset($errName)) echo $errName; ?>
<input name="email" size="40" value="<?php echo $_POST["email"]; ?>" type="text">
        <?php if(isset($errEmail)) echo $errEmail; ?>
<input name="phone" size="40" value="<?php echo $_POST["phone"]; ?>" type="text" id="phone">
        <?php if(isset($errPhone)) echo $errPhone; ?>
<input name="city" size="40" value="<?php echo $_POST["city"]; ?>" type="text" id="city">
<input name="state" size="40" value="<?php echo $_POST["state"]; ?>" type="text" id="state">
<textarea name="comment" cols="30" rows="10" id="comment"><?php echo $_POST["comment"]; ?></textarea>
<input type="submit" value="Submit" name="submit" class="contact-submit" />
</form>
It seems pretty simple.. but it's not working at all. I would also like this page to submit to it's self, and when it actually does send an email, to just make the form disappear and replace it with the thank you text instead of sending you to another page. I also do not need to use an smtp server, it goes directly to the network server when sent.
I'm really sorry to ask all of this, I'm trying to learn this language and need to make this work.
Thank you for anyones help in advance.

.oO(BarryGBrown)
> I have a php file which generates an email from a form
in a website I have
>designed. I just want to make some areas of the final
generated email in bold
>text. I know if people have plain text only selected in
their email client they
>won't see the bold text, but at least it will reach a
certain percentage of
>users.
You can't do bold text in a normal email. Plain text is just
that -
plain text. For anything more you need HTML. _If_ you should
need it.
Usually plain text serves pretty well and is the most
efficient way.
> the line in question is -
>
> $body ="Booking request details from website:\n\n";
>
> I have tried putting and ,
syntax is used in some forum software, but besides that it
has
no meaning whatsoever.
>inside the inverted commas, outside
>etc, plus tried different declarations within the
<head>, nothing works! What
>am I doing wrong?
You would have to create an entire HTML email with all the
required
headers and boundaries. Quite difficult to do by hand with
PHP's mail()
function.
> I am a beginner with this php stuff, please be kind!
Then you should start simple with plain text. There are some
classes out
there which make it easy to generate text and HTML emails
(phpmailer for
example), but you should be familiar with PHP coding if you
want to use
them.
Micha

Email issue - not downloading to Outlook and email on cell phone not working

Anyone know what is causing this? Not working since 1030AM today.
No verizon email downloading to MS Outlook and cant send out emails on my cell phone (Verizon network)? When will this be corrected?
Solved!
Go to Solution.

No, the issue resolved itself. This happens every once in a while and lasts for 30 min to an hour , then it works again. I get that strange error code message from Outlook Express with the 0x000 etc. No one knows why. Just one of those things you have to deal with. Next time i wont waste time calling and sitting on hold for hours and hours. Not worth it.

Blackberry 9870 Email Account Setup Wizard not working

i have Balckberry 9870 and I am trying to setup an email account, but into setup wizard, E-mail setup wizard not working. please help

pankajmaniyar wrote:
Thanks Ira :-) I will try to reload the operating software and than see, if the problem resolved or not.
Before you reload your OS I suggest you call your carrier first. This could be an issue on their end, it may be caused if your carrier has not correctly provisioned the BlackBerry smartphone for BlackBerry data services.
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

I cannot access my Apple ID after I made changes reset password m does not send to my email and birthday does not work,

after changes to to my Apple ID I can no longer log in or reset. The reset does not go to my email and the birthday option does not work. How do I access Or install a new I'd without accessing the old password?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

HFM Taskflow Email and Data Export Not Working

Hello all,
I am attempting to set up the HFM taskflow email and Data export functionality. Unfortunately, the email is not working. I completed the set up of my SMTP mail using the EPM Configurator, and tested the email funtiontionality for FR and it works well. Not the case for Taskflow.
Is there an addtional seetings that needs to be configured. I am also unable to extract data using the taskflow. The export path is specified in the textbox, but the file is not exporting to the server location. Is there any type of port or setting that needs to be configured.
I am on version 11.1.2.1. Please help
Edited by: 944327 on 17/09/2012 14:52

I wanted to create a thread about this too. There is a big problem in Lightrooms email sending. Photos are sent inline but not as attachments. They need to be sent as attachments so that the email clients can save them easily.
This is actually important to some and responses by Adobe have not understood this.
--2510201414571280874==00004
content-id: <AEDF354435956231.560091>
content-description: L1120161.jpg
content-transfer-encoding: BASE64
content-disposition: inline; filename="L1120161.jpg"
content-type: image/jpg; name="L1120161.jpg"
As for your low res image. It is probably the setting you used, you might have it set to "email quality"
Ankur

My email seems to be not working.

I always used my iPod touch for looking at email, along with everything else, so it was always in my "menu bar" at the bottom. Until recently I have not been able to recieve/send emails. I would say this problem started around Wednesday (October 1st). If I saw any message numbers I would usually just glance at who they were from and then if it was a quick response, I would just do it from my iPod. But most of the time I would use my laptop to do that. But one day I was getting curious why I wasn't getting any email. So I opened up Mail on my laptop and I have 30 messages!
Now how come my iPod isn't displaying I have any messages? And I even opened it manually and checked...it just kept saying "chekin for new messages" for about 7 minutes. I looked in the options for Mail and everything seemed to be fine.
What should I do?

some people report mail issues with varoius email services
gmail seem to work pretty well though so maybe
the issue is related to those services
unless the ports and other email settings are set wrong

Email on E75 is not working

Similar Messages

Maybe you are looking for