Email on my Pre - IMAP username and password not working

I am trying to set up my work email on my new Palm Pre. I am using the identical settings as I did (successfully) in my Treo 755p. IMAP server, SSL, etc. But on the Pre I always get an error message that my username or password are incorrect. My username is inordinately long (32 characters) and I am wondering if the Pre has a maximum and it's not passing the full username onto the server? Or maybe something else? Super frustrating for sure.
Post relates to: Pre p100eww (Sprint)

I use IMAP accounts with self-signed certs, which didn't seem to work... so I had to choose unsecured for both my incoming and outgoing email. Can you setup the account if you select unsecured (assuming your server allows unsecured connections)?
-Travis

Similar Messages

AirPort Base Station disk username and password not working

I got a new AirPort Base Station the other day and everything worked fine until I started to set up the networked disk. On my mac it works fine, it just pops up when I connect to the network ( woot for macs ). On my windows it asks for the username and password. After I enter it it comes up with "Unknown user, incorrect password, or login is disabled. Please retype the login information or contact the disk's administrator." I have tried to log into the disk on 2 other computers running windows xp with the same problem. What is wrong with it and how do I fix it?

Specifically, I had the typical problem connecting when using Windows Live OneCare, despite allowing AirPort Disk Agent in its firewall pop-up.
This is the procedure which unlocked access via AirPort Disk Agent:
Double Click Windows Live OneCare icon in system tray. Or use your own means to get its main window open.
Click the "Change OneCare Settings" topic listed along the left edge column. This will open a new dialog box.
Click the "Firewall" tab of this new dialog box.
Click the "Firewall connection tool" button shown right under the protection level slider. This will open yet another dialog box.
At the top of the list in this "Set up connections" dialog box will be a checkbox (probably unchecked) next to the words "Network Discovery: Browse your network to find printers, computers and other devices."
CHECK THAT BOX.
Close all the dialog boxes using an OK button where available, else the usual [X].
Left-click the AirPort Disk Agent icon in your system tray. From the menu that pops up, select the disk you were having trouble with. Enter its password (the one you know works from a Mac, if appropriate).
After a delay, your "My Computer" window should show a new drive. If you have window settings appropriate to this display, the drive should appear under the "Network Drives" category. In my case, it became drive Z:.

Aironet 1100 Default Username and Password not working

I have a Cisco Aironet 1100 series access point (AP1120B) that after resetting to factory defaults the default username and password (Cisco and Cisco) aren't working in the web GUI. I am able to telnet to the AP's IP and log in with Cisco and Cisco but don't know the ENABLE password. I have tried Cisco and cisco and everything else i could think of with no luck. any help would be appreciated.
I also have a Cisco Aironet AP1242AG that is doing the same thing.

Hi Rich,
I assume that you are using the mode button to reset the configurations on these units -- this procedure *should* reset all credentials to Cisco.
If this is still not working, you can try the following:
1) Connect console port and power-cycle unit
2) When IOS starts loading, hit ESC key twice to get to the boot-loader prompt
3) At the boot-loader prompt show a directory of the flash filesystem (dir flash:)
4) Delete or rename the files "config.txt" and "env_vars", then boot the system ("delete flash:/config.txt" "delete flash:/env_vars")
-Patrick Croak
Wireless TAC

ILM assistant XDB username and password not working

Hi All,
Hi I'm using ILM 1.3 with Oracle 11g on HP.
I am able to log-in to apex server but not ILM assistant.
http://dblxamd02.vxindia.veritas.com:8080/apex/apex_admin it works with admin/oracle.
But im not able to login to http://dblxamd02.vxindia.veritas.com:8080 when it asks for XDB username and password.
I tried to reset the password using apxxepwd.sql but not luck.
Did anybody observer this issue ? if so can somebody please reply me ASAP ?
Thanks in advance.

There are two wats to install the ILM toolkit:
1) Directly on the server where your instance is located. In this case you do not need to provide a TNS connection name. Therefore, you would execute the script as follows:
@ilma_install.sql pune
2) Remotely from a client. In this case you do need to provide a connection string to your remote database instance. Therefore, you would execute the script as follows:
@ilma_install.sql pune@11
in this scenario the connection details are derived from your TNSNAMES.ORA file. If you have multiple Oracle products installed you have multiple copies of this file and it can be difficult to track down which file is being used. To point to a specific TNSNAMES.ORA I normally set three parameters:
ORACLE_HOME - points to your 11g Client installation directory
PATH - point this to the Oracle home containing SQLPlus, usually this is ORACLE_HOME/bin
TNS_ADMIN = ORACLE_HOME/network/admin
then make sure the TNSNAMES.ORA contains a reference to your identifier "11". You can test the connection by using the TNSPING utility that is part of the 11g client installation. The format for your instance would be:
TNSPING 11
this will tell you if you can connect to your instance. If there are any issues check the connection via the Net Configuration Assistant, or you can edit the TNSNAMES.ORA file directly via Notepad.
Hope this helps
Keith

SSH local database username and password not working

I have a weird issue. I recently setup an ASA 5510 and had SSH working. To make it easier on my VPN users I then decided I wanted to setup a Windows 2008 Network Policy Server for RADIUS authentication. Ever since I added the RADIUS part to aaa authentication, when I use SSH to connect to the ASA it will not take the local user name and password I have setup. I can however get in using a Domain user name and password. Below is the SSH and AAA configuration. Am I missing something here? The username and password in the ASA is not on the domain and it's like the ASA is not even trying LOCAL when it tries to authenticate. I want it to use the local username and password if possible. I'm kind of new to ASA's..
On another note, I have never been able to SSH in on the internal interface. I always get a "The remote system refused the connection" error message. I can only use the outside interface.
Site-ASA# sh run | in ssh
aaa authentication ssh console SERVER_RADIUS LOCAL
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 60
ssh version 2
Site-ASA# sh run | in aaa
aaa-server SERVER_RADIUS protocol radius
aaa-server SERVER_RADIUS (inside) host 10.0.0.6
aaa authentication ssh console SERVER_RADIUS LOCAL
aaa authentication http console SERVER_RADIUS LOCAL
Site-ASA#
If there are any other config that would help I would be more than happy to display them
Thanks!

Thanks for the reply. I was just coming in to update this because you are exactly correct. For some reason I kept thinking that if the authentication failed via RADIUS it would use local which is not the case.
Problem (or no problem) resolved.

For the 1st time I am trying to send an iPhoto by email but get an error message "combinations of username and password not recognised" I use the same details to log on to my Sky Mail (yahoo mail ) account . Any ideas?

For the 1st time I am trying to send an iphoto by e-mail but get the error message " combination of username and password not recognised by the server" I use Sky Mail ( yahoo mail) and input the same username and password that I access Sky Mail - have retried many times. Predictably the Sky help desk have no idea. Can anyone help please?

I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Gmail Error: Username and Password Not Accepted?

Okay, once in a while my e-mail actually works on my I phone but about 90% of the time I get this notification; Cannot Get Mail: Username and password not accepted. Does anyone else have this problem or know how to fix it? Oh yeah, I'm using 1.0.2, gmail, and I'm positive my password and username is right.
Message was edited by: one11archerave

I think the problem is solved. Last night I was on my friends computer and I accidentally stored my gmail password. I couldn't figure out how to delete it so I changed my password and then updated my iPhone with the new password. Ever since then I haven't had any problems.

Hi . username and password not save in firefox 7.0.1 . please fix it.

hi . username and password not save in firefox 7.0.1 . please fix it.

This is why I'm losing my patience with Firefox. Every few weeks there's another update; which usually auto installs without asking permission. Then I have to go around and find and fix those things that worked in the previous version. Can't you guys do like Apple does and notify us that there's an update, tell us what the changes are and let us decide whether or not we can download and use it? Until this is fixed, I have gone back to version 6.0 and will stay there (unless it auto updates) until you guys get a better way to communicate. If nothing happens, I will go look for another browser...not IE...maybe Chrome or some other.

Usernames and passwords not saved

I have followed all of the suggestions and usernames and passwords are not saved. This feature did work until I install Firefox 4 and still with Firefox 5.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"
*https://support.mozilla.com/kb/make-firefox-remember-usernames-and-passwords
*https://support.mozilla.com/kb/Username+and+password+not+remembered

What to do in iPhoto, error when sending pics email, username and password not recognized

I have imported photos from my camera to iphotos, cool it works great.
But why when I want to email the pics, I get an error message that states
my username and password arent recognized??

In the iPhoto preferences ==> accounts delete the account and renter it
Or better yet IMHO set Apple mail as your email client in the iPhoto preferences rather than iPhoto
LN

Please Help! email name and password not working/ cannot retrieve email

email stopped working. does not accept username and password. keychain repair works. password verified. still doesnt work. when I tried to pay for a new account it would not let me use my original name and password, saying they were already in use!
help please, i want my email to work..

The second list of 1 through 6 was for when you don't have a disc.
Also...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... though I was just thinking, this new User probably shouldn't be the same name as an existing one.
If that doesn't work for you (and some users have reported it has not worked for them), try Niel's procedure Making the Setup Assistant reappear.
http://discussions.apple.com/thread.jspa?messageID=607547
I lost my admin user (Mac OS X 10.4 and earlier) ...
http://discussions.apple.com/thread.jspa?threadID=121786&tstart=0
I'd call AppleCare you can get Replacement Install Disks shipped to you at a reduced rate, have your Mac's Serial # handy...
http://www.apple.com/support/contact/phone_contacts.html

Lpadmin - request for username and password - not responding correctly

Recently updated to a new computer and 10.5.7.
A printer was paused (somehow). Tried to resume printing and got a request for an lpadmin administrator user name and password. Mine is the only account on this computer. Put in my user name and password, but this was rejected. If I tried 3 times I was told to try later (and given my password hint). However, after clicking OK to this dialogue the action WAS taken.
Same thing happened when I tried to add a printer. It will not accept my username and password, but if I persist until I get the message to try again later, the printer WAS added.
So, I am back to having a printer, but this seems like a bug.
Steve

see this link
http://support.apple.com/kb/TS2754

Default username and password not found

Hello all,
Just bought the new WVC54GCA ip camera, tried to configure it with its setup but can't get in as I couldn't find the admin password anywhere.....Does anybody know what are the default settings for these username and password fields?
(Linux, MInt, Firefox...)
regards

Default Username is admin and default password is admin...However, if it does not work then you need to enter the password that was set when you installed the camera for the first time...If you don't remember the password then you need to reset the camera and re-configure it...

Admin username and password not recognized for upgrade

I'm trying to upgrade a user account on my computer to Yosemite. This is that not the admin account. My admin username and password are rejected. It is also rejected when I try to do something such as change the power settings. If I'm doing this within my admin account the same username and password work just fine. I have no idea how to fix this.

One more follow up question. I logged back into my admin account to upgrade to Yosemite. The software was already downloaded in the user account using the apple ID and PW associated with that account, which is different than the apple ID associated with the admin account.
Within my admin account, on the first page of the app store app it shows OSX Yosemite as 'downloaded' and nothing happens when I click that button.
The only other option is to click 'learn more' under the OSX Yosemite image. From that page it asks me to sign in to the App store to download Yosemite. The Apple ID box already contains the other Apple ID (not the one I want to use), and there is no option to change that. All I can do is enter that password.
I'd like to complete this with my Apple ID but I don't know how to change it.

One username and password not being added to keychain

I have entered a username and password for a webpage and answered yes when asked it I wanted this saved it to my keychain.
However I can not find the u/n and pass word in my keychain (Safari>Preferences>Passwords) and this u/n and pw is not shared with my other devices. All my other u/n and pw are in my keychain and are shared with all my other devices.
Can I manually add a u/n and pw to my keychain?

Hi Matt,
I did previously have "Private Browsing" selected and deselected that and that is when I could set up FF with my username and pw but could not on Wells Fargo. So, I did what you suggested and that was to delete cookies because that seemed like a good reason but alas, it still will not give me the option to set up the username/pw.
I would not be surprised if it is Wells Fargo, they are a bit of a pain. You cannot even save them in Bookmarks because I was told they are constantly making changes to their site and this stops the bookmark from working.

Email on my Pre - IMAP username and password not working

Similar Messages

Maybe you are looking for