Email Output type : No Automatic trigger of output type while saving doc.

Hi Gurus - To trigger an email from the output type, I've configured a output type with medium as 5(external send) with communication strategy and created condition records with medium as 5 to trigger immediately.
While creating corresponding document, the output is not automatically determined, it required to manually feed the output type every time. Can you please provide if any settings were missed to trigger immediately!!
In Output analysis showing a message as "No print data determined for the communication strategy"
Steps:
1. Configured the output type with Medium as"5" and associated partner functions.
2. Created the condition records with medium as 5 and trigger immediately.
Thanks,
Sree

Hi ,
while maintaining condition record for output type when you click on communication method, give logical destination as 'LP01'.Hope this will solve.PLease let me know if you have any issues on this.
Thanks and regrads,
Rajeshwar

Similar Messages

Output type not automatically determined (no output device specified)

the output device is already specified for this output
we dont want to manually add the output on all the invoices where the output was not automatically determined before... what should we do?
is there a way not to manually add them?
thanks in advance
Pablito

Hi
You really dont need to add the output in all these documents.
You have to maintain the masterdata for output records in VV31.
Now just open all the invoice documents one by one in Change mode through transaction code VF02 and just save it
Whenever a document is opened in change mode, the output gets automatically triggered. Hence the output type will be automatically populated in the output screen. Once you save the document, the output gets successfully executed, and you will get the desired document
Reward if this helps you

Automatic trigger of message type WE01 in VL32N transaction

Hello,
My requirment is to populate the message type WE01 in VL32N transaction.
Please let me know the steps
Regards,
HK

Hi,
You have to maintain the CONDITION RECORDS for the WE01 output type
Goto the Transaction code NACE and click on the APPLICATION ME and click on the OUTPUT types in the MENU BAR
select the OUTPUT type WE01 and assign the SMARTFORMS & PRINT PROGRAMS to the output
Now assign this outpt to the OUTPUT determination procedure and
Maintain the condition records for the OUTPUT
Once you maintain the CONDITION RECORDS , then automatically it will be triggered to the INBOUND DELIVERY, in VL032N
Please check them and let us know if you need any frther details
regards,
santosh

WM: Need automatically trigger storage unit type and storage sec during TO

hi friends
I configured the manually enter the bin and storage section the transfer order. But i dont want to enter storage unit typeand storage section . i need to enter storage bin only in the transfer order .is it possible ?.
with regards
dinesh
Edited by: code acess on Nov 29, 2011 6:29 AM

code acess wrote:
hi friends
>
> I configured the manually enter the bin and storage section the transfer order. But i dont want to enter storage unit typeand storage section . i need to enter storage bin only in the transfer order .is it possible ?.
>
> with regards
> dinesh
>
> Edited by: code acess on Nov 29, 2011 6:29 AM
hi,
No it is not possible .
Thanking you.

Automatic triggering of output type in Goods issue

Hello Experts,
I am trying to pick the output type while creation of goods issue document using transaction MB1A. After creation, it is not coming automatically. I did the customization setting for maintaining conditions based on output type WA02, adding trans/Event-WA, print version-3, print item-1 but still it is not populating automatically while creation of GI document.
Could you please let me know, how to do it or if i am missing some customization.
thanks,
Karun

Hi,
To trigger the OUTPUT automatically you have to maintain the CONDITION RECORDS in MN21
Goto the Transaction code MN21 and enter the OUTPUT type as WA02 and give the following details
Trans/Event type
Print version
Print item
partner function
Medium
Date/Time
Language.
After maintaining this check whether the OUTPUT determined automatically or not.
I hope it will determine automatically.
thanks,
santosh

Output Type not automatically determined at invoice creation

Hi Friends,
I am facing a problem that while i am generating the invoice for a particular billing document type, the output type is not automatically being determined. Instead, I have to go into the invoice in change mode (VF02) Header>Output and assign the output type to it and select the local printer and save in order to print the invoice.
I am generating the invoice for this Invoice Type/Output type for the first time.
Please suggest the possible causes.
Regards,
Pankaj

Hello Pankaj,
Suppose you are using output type RD00 for invoice print out. You have maintained the condition record for RD00 in transaction code VV31. The most important thing here is the assignment of the printer.
Suppose for output type RD00 you are maintaining the condition record for key combination - Sales Organization + Distribution Channel + Division.
At the header level you will see the Sales Organization & Distribution Channel & at the item level you will see the Division.
Sales Organization = BP01
Distribution Channel = 01
Division.............Name..........Funct.........Partner............Medium......Disp. Time.....Langu
01............... Std Division..........BP............--......................1......................3................---
Select the line item & click on Communication. Here assign the output type which you will use for the print out. Now Save the condition record.
After doing this try running one sales cycle - sales order - delivery - invoice. Save the invoice & now check in the change mode (transaction code VF02) the system will determine the output type RD00 automatically.
Note:
1. In the create mode the system will not display the output type RD00, after you have saved the invoice the output type will be determined automatically.
2. Also check if there is any requirement assigned for the key combination in the access sequence (IMG - Sales and Distribution - Basic Functions - Output Control - Output Determination - Output Determination Using the Condition Technique - Maintain Output Determination for Billing Documents - Maintain Access Sequences)
With best regards,
Allabaqsh.
(Idhasoft Ltd.)

Proforma Invoice triggers automatically through delivery output type

Hi Gurus,
Iam facing one issue related proforma invoice, senerios is sales order- once delievry saves, it triggers one output type ZGF8, and it triggers Proforma invoice type ZGF8.
In delievry output type ZGF8, we have output program Z_EVT_LIKP_OUTPUT, and Form Rouitne CREATE_EVENT.
Now user want to differnt delivery type and differnt proforma invoice type same as above.
My question is how the system is triggers ZGF8 proforma billing type automatically, where in the system have the setting.
Please guide
Thanks
Ramki

in creation mode you can see kew combination this will show your access sequence criteria.
Go to NACR display mode in header condition info ,click condition info tab with entering any values in screen this will show the details

Output type not automatically triggered in billing

Dear all,
Output type is not automatically triggered while creating billing,every billing need to maintain it
manually but output type is already maintained for all customers in VV31.
How to solve this issue or any configuration setting need to be done ?
Jeyakanthan

Hi
Kindly check the belwo path
Sales and Distribution
     Basic Functions
         Output Control
          Maintain Output Determination for Billing Documents
            Maintain Output Determination Procedure
in the billing out put procedure check against the billing out oput condition type any tick is maintained in the manual only
Regards
Damu

How to trigger EDI output type by logical system

Hi,
I am trying to propose a delivery output on delivery document based on logical system.
I have maintained partner profile by logical system. In the partner profile, i have given the delivery output type and the process code.
I have also maintained condition records for the delivery output.
I would like the system to propose the delivery output not by ship to party or sold to party but by the logical system.
Because i do not want to maintain 3000 customers in the partner profiles, instead trigger the output by logical system.
Please let me know, if anyone has gone thru this situation and resolved.
Thank you in advance.
-Naga

Hi,
First thing you should make sure that, when you create the output type , partner function should have an entry for EDI - LS combination.
Secondly , make sure you have option for EDI transmission on the output type (medium 6).
Third, when you create partner profile for LS, make sure you give partner function as LS, even though SAP gives warning that its not required.
Last but not least, i didnt create any distribution model , because when i created distribution model and generate partner profile, system was not generating the profile properly.
I am not sure, whatever i did was right, but its working for me.
-Naga

Mb1b trigger which output type ?

Hi
we do mb1b for 322 movement. I found it has wa01 and zwa1 which both for mb1b output type.
When we do for plant A, it may use wa01, another use zwa1? Does this relate to omj4 setup?
Or any place we could trigger different output by plant?
Thanks
Alice

Hi experts,
for wa01 and zwa1 ,these two output type we setup in mn21 same.
type as wa and print version 1 , item document as 6 . Only in OMJ4
we setup plant a for wa01 and plant b for zwa1.
Does that mean when we do mb1b , for plant a ,it will trigger out wa01?
Or where else we could setup plant with output type ?
Thanks
ALice

HOW TO TRIGGER AN OUTPUT TYPE ON INVOICE SAVING

I need to write a routine to trigger a specific ouput type on invoice saving for a particular pricing condition.I have written the code within the routine.But now what do I do to trigger the output type , I mean in which transaction do I place the routine
to make it to trigger when the invoice is saved if the given condition is satisfied

Hi Shah,
You need to assign that routine in your billing outptut determination procedure control data then specic the the condition type.
IMG path is
SPRO>Sales and Distribution>Basic functions-->Output control >Output determination>Output determination using by the condition technique >Maintain output detrminetion for the billing documents>Maintain output determination procedure-->Control data.
Before tha you make sure that you are maintaining condition record for that output type in VV31 transaction
I hope it will help you,
Regards,
Murali.

Automate multiple transactions & output types

Hi
We've set up VL71, VL72 & VL74 output types, but would like to automate the combined output instead of letting the user run the transactions individually. Is this possible? I'd for instance like to call these transactions and the output types per transaction should be output immediately without the checkbox selection for individual Handling Units and we'd like to AVOID BDCs.
Best regards, Adrian

I submitted these programs in a (single) background job and it worked.

SmartForm not printing some values when output type triggered automatically

Output type 'ZD00' for billing is created and configured in NACE with 'send immediately (when saving the application)'. I'm creating a billing document in VF01, then this output type is triggering perfectly. But when I check the form output in spool price and discount values are not displaying. And for the same billing document, when I go to VF03 and selects issue output to and execute the same output type its giving all the perfectly.
What could be the problem ?

there we go, you might want to have a look at RVADIN01 which is the standard driver program for invoice printing.
Your main interest should be to see how they select their prices, and then learn from it and adopt your program accordingliy.
Yeah RVADIN01 is a SAP-SCRIPT driver program, but the selection of data is the same as in SMARTFORMS, so dont be afraid to use their logic.
regards.

Download Background job output to Excel automatically

Dear Experts,
Hi there... Please note the following scenarion and give me your expert solutions on the same...
I have created a SALES QUANTITY REPORT for exports... In this there are many conditions applied to achieve data in many of the columns of this report. If we run it for 2-3 months it is not a problem... The output comes at a marginal wait time... But the moment it is run for a whole year then it just goes on and on.... I cannot fine tune also.... because of the conditions... For better performance and fast retrieval i have used views in this report to achieve quick output...
The thing is when i put it to execute in Background it comes within an hour or so... But the output is not readable.... so here is what i want:
1. First of all why report executes so quickly when put in background, whereas in foreground it takes more than 4 hours and also no guarantee of output.. This is to satisfy my curiosity...
2. I want the output to get automatically converted into excel and get stored in a specific folder the moment the job is finished in background without any format getting disturbed. The report is prepared in ALV...
Please gurus help me out.
Thanks...
Jitesh

It is giving me the following error: -
17.02.2009 11:24:41 Job started                                                                             00           516          S
17.02.2009 11:24:41 Step 001 started (program Z_SD_SQR_EXPORT, variant &0000000000007, user ID JBABAP)      00           550          S
17.02.2009 11:24:45 Incorrect Print Parameter                                                               0K           091          I
17.02.2009 11:24:45 Spool request (number 0000014520) created without immediate output                      SY           355          S
17.02.2009 11:24:45 Excel file c:\sqr\sqrexport.xls cannot be processed                                     UX           893          E
17.02.2009 11:24:45 Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
form DOWNLOAD .
CALL FUNCTION 'SAP_CONVERT_TO_XLS_FORMAT'
EXPORTING
*   I_FIELD_SEPERATOR          =
*   I_LINE_HEADER              =
    i_filename                 = 'c:\sqr\sqrexport.xls'
*   I_APPL_KEEP                = ' '
tables
    i_tab_sap_data             = it_final
* CHANGING
*   I_TAB_CONVERTED_DATA       =
* EXCEPTIONS
*   CONVERSION_FAILED          = 1
*   OTHERS                     = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " DOWNLOAD
Please reply..
Thanks,
Jitesh

Output device not automatically determined in VF02

Hello gurus,
My default output device is not coming automatically when I add an output type in VF02. This is an issue because output type has requirement 62 set in output procedure, therefore it will not be added until invoice is release to accounting. Futhermore, we have implemented Argentina eletronic invoice, which won't allow to change the invoice once it has been released to accounting. Quite a contradiction. So I'm hoping the output type will be added by condition technique while releasing to accounting, yet i believe since the output device is not being automatically determined in the background, it won't do.
Any ideas?
Thank you very much.
JP

Hello guys,
I had checked all your suggestions before posting this thread, but still the issue remains:
- VV31 condition records are fine but I cannot set a single output device since it will be used for many output devices.
- Analysis was carried in VF02 and the condition is being picked up but since requirement 62 is set in the output procedure, which forces the billing document to be first released to accounting, the condition is being removed:
- Printer is set in the user profile options, but does not come as default in VF02
Thank you all.
Kind regards,
JP

Email Output type : No Automatic trigger of output type while saving doc.

Similar Messages

Maybe you are looking for