Email preference won't work in aperture3

Try as i might i am unable to set email size in prefs to anything but full size jpeg

Solution found. Where you select the size of the image for export (email), there is an option to edit the size. Select the Edit button and then specify the size you want in the right hand side of the panel such as 25% of the original size or select the suggested sizes from the left hand side of the panel.
That works even if when you return to the export panel it still looks unchanged. If I selected 50% from the left hand panel, it did change to 50% in the export panel, but if I typed in 25% in the right hand panel, it still said it was going to export 100% but actually did send an image of 25%.

Similar Messages

  • Mac Sleep Timer (through 'Energy Saver' in System Preferences) won't work

    Hello,
    I have a MacBook (13-inch, Mid 2009) running Mac OS X Snow Leopard 10.6.3,
    and it has been installed with the latest software updates possible.
    (The latest update is the 'Security Update 2010-003')
    Previously I was using Mac OS X Leopard 10.5 on my MacBook,
    and I can vaguely remember the timed computer sleep through Energy Saver would work.
    That is, when the counter's time matches the amount of time I specified (e.g. 10 minutes), the computer enters sleep mode and displays a pulsing power light.
    After upgrading to Snow Leopard I can barely remember the scheduled computer sleep will work as I don't really notice how it sleeps / I will shut down my MacBook before I go to bed.
    ==========
    However, last night I was really tired and slept in front of my MacBook unconsciously.
    When I woke up, I found that my MacBook didn't display a pulsing power light but a continuously-growing power light.
    I tapped the trackpad and the display turned on, so I knew that my MacBook didn't go to sleep a whole night.
    *What that means is that the Sleep Timer (through 'Energy Saver' in System Preferences) won't work.*
    But the timed display sleep DOES work.
    ==========
    After spending a whole day Googling,
    I found that there are plenty of people suffering the same problem as me, although their Macs and OSs vary.
    I also found an official support page from Apple concerning the related issue:
    Mac OS X: Why your Mac might not sleep or stay in sleep mode
    http://support.apple.com/kb/HT1776
    I tried the following methods but still can't resolve the problem:
    _- boot my MacBook in safe mode_
    _- use the 'Disk Utility' to repair Disk Permissions through booting my MacBook from the Mac OS X Snow Leopard Installation DVD_
    _- reset NVRAM (Intel-based) (as PRAM is used by PowerPC-based Macs)_
    _- reset SMC (System Management Controller)_
    NONE of the above-mentioned methods can resolve the problem.
    Althought I am sure that the Spotlight isn't indexing the hard drive, and I just start my computer and do nothing and wait for the scheduled computer sleep, the scheduled computer sleep just won't work.
    In the other Mac forum, I saw someone suggest installing an application called PleaseSleep:
    http://www.dragonone.com/products/macosx/pleasesleep/
    It works.
    But I really want to find out what caused this problem as this is a function shipped with Mac which is expected to work normally.
    What's more, Apple is claiming to be a green Apple, right?
    ==========
    Here's the log taken from 'Console':
    - Sleep by closing the lid of my MacBook:
    Apr 18 13:21:05 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
    Apr 18 13:21:05 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
    Apr 18 13:21:07 Michael-Leungs-MacBook configd[37]: network configuration changed.
    Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:23:21.028 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:1.618421972
    Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:23:21.579 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:2.169138968
    Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Clamshell Sleep
    Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - EC LID0
    Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
    Apr 18 13:23:23 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
    - Sleep by manually clicking the Apple logo in the upper left corner of the screen -> 'Sleep':
    Apr 18 13:31:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
    Apr 18 13:31:46 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
    Apr 18 13:31:49 Michael-Leungs-MacBook configd[37]: network configuration changed.
    Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:32:04.033 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.313067079
    Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:32:04.589 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.869303048
    Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
    Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
    Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
    Apr 18 13:32:06 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
    - Sleep by manually pressing control + eject, and the press 'Sleep':
    Apr 18 13:34:17 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
    Apr 18 13:34:17 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
    Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:34:46.080 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.360466003
    Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:34:46.564 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.844347000
    Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 566 ms
    Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
    Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
    Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 567 ms
    Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: network configuration changed.
    Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
    Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
    Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
    Apr 18 13:34:48 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
    - Sleep by _turning on the application called 'PleaseSleep' based on the settings from 'Energy Saver'_:
    Apr 18 13:37:22 Michael-Leungs-MacBook PleaseSleep[288]: Application is enabled
    Apr 18 13:37:29 Michael-Leungs-MacBook System Preferences[1136]: * AGCAttach() failed
    Apr 18 13:37:31 Michael-Leungs-MacBook [0x0-0x58058].com.apple.systempreferences[1136]: Couldn't find any matches.
    Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Checking sleep conditions...
    Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Going to sleep...
    Apr 18 13:38:23 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
    Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
    Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:38:56.042 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.321902931
    Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:38:56.571 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.850627959
    Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 707 ms
    Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
    Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
    Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 708 ms
    Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: network configuration changed.
    Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
    Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
    Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
    Apr 18 13:38:58 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
    - If I disable 'PleaseSleep' and only depend on the non-working 'Energy Saver', nothing happens.
    ==========
    Looking forward to your replies! Thanks in advance!

    Found this discussion by googling "com.apple.systempreferencescouldn't find any matches"...
    One month ago I bought a brand new Macbook Pro 13", and after a couple of weeks I realized it wasn't sleeping on its own when it should, per the system preferences. (I did sleep when I chose "Sleep" in the menus or closed it... It just wouldn't sleep on its own, while open.) What was extra frustrating was that it was intermittent... It would sleep on its own maybe 1/3 of the time, but other times it would NEVER go to sleep. I deleted PowerManagement.plist, reset the SMC, etc... No luck.
    I took it to the "geniuses" at the Apple Store, and the guy took all of five minutes trying to diagnose the problem. When my MBP wouldn't sleep on its own, he promptly replaced it with a new one. That was nice, but I actually would have preferred that he diagnosed and fixed it. (I think the store was so swamped with people coming in for service that day that they were doing anything they could to close cases and get customers out of there ASAP.)
    Now, sitting here with my 48-hour-old MBP, I still have the problem. The other one was so new that I had barely put anything on it yet. The only applications I had put on it were MS Office for Mac 2011, Firefox, Chrome, and Adobe Flash Player. I've put Office and Flash Player on this one, but not yet Firefox or Chrome. That's it. No other customization or fancy business.
    I looked into the Console just now, and I see the "Couldn'tfind any matches" entry popping up again and again. The last three seemed to pop upright around the time when my MBP should have gone to sleep on its own, but not down to the second, so it's hard to definitively point at that and say it's it for sure.
    They need to fix this!!

  • Outlook Email script won't work with Reader 9.1

    The attached form was designed in ES 8.2 and has worked fine with Reader 8.0. The "properties defaults" tab is set for Reader 9.0 or better. However, upon recent upgrade to Reader 9.1, the Outlook Email script stopped working. I'm new to Livecycle and scripts and was hoping that someone had an easy fix?

    okay thanks. One more question. What script is used to activate the "read receipt requested" function in Outlook?
    Date: Wed, 12 Aug 2009 12:23:13 -0600
    From: [email protected]
    To: [email protected]
    Subject: Outlook Email script won't work with Reader 9.1
    Interesting .....it sounds like an issue in Reader. From a code perspective everything is good .....the code tells Reader's email service to communicate with the mail client. This could be where the issue is.
    You may want to post your question on the Acrobat forum and see if they know of anything .....or you can report the issue to Support and have them look into it. Maybe something was introduced into the 9.1 version.
    From a Designer perspective all is good.
    Paul
    >

  • Since upgrading to yosemite my sky email account won't work on my mac although it works on my iPad

    since upgrading to yosemite my sky email account won't work on my mac although it works on my iPad

    Mail troubleshooting - Yosemite
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • Email client won't working

    Hi..
    I have a problem till yesterday with iphone 4 email client..it won't show me my new emails..I just see 1 new message like notification and when I go to see inbox it is not there .
    Pleas help me to fix this problem.
    All the best
    Dusica.

    Well I know recently Google has started locking accounts (well where they can check from) when they are checked on too often or from too many different places.
    My wife couldn't check her email anymore from new locations) until it got unlocked.
    https://www.google.com/accounts/DisplayUnlockCaptcha to unlock an account.
    For me I check from work computer, home computer, and my iPhone (thus AT&T ip assigned while in this home area). Never had an issue until I went on travel to another state and thus AT&T gave another IP and presto, kept getting bad user name or password messages when trying to check mail. Once doing the unlock I could check again.
    Not sure if Yahoo is doing the same.

  • "Automatically checking email" preference doesn't work?

    I'm in the midst of switching ISPs. Right now I have 2 ISPs with 2 different connections (one dial-up, one DSL). The dial-up ISP, as expected, cannot connect to the mail server over the DSL connection, so under Mail Preferences I've unchecked "Include when automatically checking for new email" on that account.
    However, Mail continues to try to connect to the dial-up's mail server whenever launched or whenever I check for new email. Since it can never connect it hangs for several minutes attempting to complete this connection before coming up with an error message.
    How do I get this preference to work properly? I need to have both email accounts available for the next month or two while making sure all contacts are using the new email address, so I can't simply disable the old email account under preferences, as then it no longer shows up at all. What I need is to have the account enabled, but only to check for new email when given instructions manually to do so.
    Thanks
    Powermac 2x2.5   Mac OS X (10.4)  

    This doesn't answer the question regarding the problem with automatically checking for new mail but connecting to the dial-up ISP should not be required to check the dial-up account's incoming mail server for new mail. This can be done when connected to the internet with the DSL connection.
    I still have an Earthlink dial-up account for use when traveling if a high speed wired or wireless connection isn't available but I primarily use a high speed cable modem internet access when at Home. I access my Earthlink dial-up account with the Mail.app when connected at Home without any problems and without being prompted to access Earthlink via a dial-up connection when the account is checked for new mail.
    You can turn off automatically connect when needed under the PPP options for your internal modem network configuration or disable to internal modem as an access point via System Preferences > Network if you are using the DSL connection only and you can include the dial-up account to automatically check for new mail.

  • Finder window preferences won't work

    hi,
    i don't seem to get working where the new finder window opens. in Finder Preferences, under General i have selected Documents for the new finder window to open but it still opens in Machintosh HD. i've tried Home and Computer but it doesn't work either, it seems to be stuck to open in Machintosh HD. i've restarted the computer but it still doesn't work. can anyone help? thanks.

    A_,
    Glad to help again.
    Use the checklist in The Repair functions of Disk Utility: what's it all about? by Dr. Smoke.
    Download and reinstall both the Mac OS X 10.4.6 for PPC, and the Security Update 2006-003 Mac OS X 10.4.6 Client (PPC).
    If that is unsuccessful follow the troubleshooting checklist in Resolving Disk, Permission, and Cache Corruption, by Dr. Smoke.
    ;~)

  • Preferences won't work!

    Hi, I installed a Boot Camp partition from when I was on Leopard, but I recently downgraded back to Tiger.
    In System Preferences in the Spotlight prefpane and on the "Privacy" tab, I try dragging in my Windows drive but it just won't go in there and it did in Leopard!
    Should I delete all my preference plists or what?

    HI,
    Try troubleshooting the Safari .plist file.
    Quit Safari (Command + Q) Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
    Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Launch Safari. Go to Safari / Preferences or Command , (comma) on your keyboard. If the Safari pref pane renders correctly, move that .plist file to the Trash.
    Carolyn

  • My outgoing email suddenly won't work from iMac, but still works from iPad...any ideas?

    I'm not sure what happened, but suddenly I can't send any email out from my iMac.  It still receives mail.  And my iPad's email is working just fine both incoming and outgoing.  Any suggestions???

    did you find the answer as I have the same problem? Thanks

  • First my zen now email support won't work!!

    Hi,
    I am trying to get help through customer support for my product that has stopped working, I am trying to use the email function through the internt but i can't get passed the page where you pick your device, what is suppose to happen after you pick your device?Please help I am losing my patience with creative as a product!!!!

    Hi,
    Please check your PM, I left you a message.
    Good Luck.

  • Flash email from won't work

    Hi I'm trying to create a email form in flash, using action
    script and php. I've followed all the steps but nothing happens
    when the enter button is clicked. i've got a feeling it's something
    very simple and stupid I've missed. I've put all the relevent files
    on the web (including the PHP) which is supported. So I'm a bit
    stumped. I've attached the action script I'm using, followed by php
    Any help would be much appreciated the page is
    http://www.maddadesigncompany.com/form/
    thanks.

    First, I suggest you get yourself ServiceCapture:
    http://www.kevinlangdon.com/serviceCapture
    It'll let you see your outgoing and incoming requests within
    Flash. It's
    very nice for doing client/server things.
    Aside from that, all of you AS code didn't attach, so it's
    hard to tell.
    Your PHP code however, works ok. Although you have $comments
    in your mail()
    call, when you probably want $mail.
    Dave -
    Head Developer
    http://www.blurredistinction.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

  • Update 7.0.3 installed now email app won't work on iPhone 4s or iPad 2.

    I updated my iPhone 4s and my iPad 2 with 7.0.3 and now I can't get my email app to work.  It always comes up with "Cannot get mail.  The connection to the server failed."  However, if I use safari to get my mail, I can.  Any advice or is this a new bug?

    I have the 5S and iPad 2. Similar issue to the above posters. Updated 5S to IOS 7.0.3 now can't use my exchange account. Can still use my hotmail and gmail but getting 'Cannot get mail. Connection to the server failed' for Exchange. Can still use iPad for this exchange account however this is on an older version - iOS 7.0 I believe so it's not a server or permissions problem - it's localised to the 5S on 7.0.3. Hopefully a bug or a fix will be released soon. Any help would be appreciated

  • EMail Alerts won't work regardless of settings

    For some reason I don't get any alerts (vibrate, tone, red led) for new email messages. SMS, phone, calendar, etc all work fine. Messages are received fine but again no notification in or out of the holster, and yes I have checked to make sure the ring tones/alerts are set correctly and not silenced.
    I have tried changing tones and combining tone and vibrate and pulled the battery but still no good.
    Any help appreciated.
    PS .I like having the sound icon on the top left corner of the screen.
    Solved!
    Go to Solution.

    Hi all and welcome to the forums!
    The Blackberry's use index files to provide a quick reference so you media can be displayed promptly.
    I've seen this problem before in upgrading software and transferring phones.
    If you explore the media card you will find BBTHUMBS.DAT files. These are the index's.
    I have had success in deleting the .DAT files, doing a battery pull and letting the phone reindex the media files.
    When you wipe the phone these files may not get rebuilt correctly.
    Tmurphx5 is your problem now resolved or do you need more information/
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • My email/password won't work, I request a reset, re-register but no confirmatory email received

    I responded to a Firefox email which resulted in my changing my theme by mistake. I wanted to change it back. That was about three hours ago. I tried to login to my account using the username, email and password I had written down for Firefox. They weren't recognised. I asked for a password reset. No email arrived on either of my email accounts. I checked the junk folders. I requested to register a new account on Firefox. I was told an email would be sent. No email has arrived. All I want to do is change the theme back to what it was because I can't read my tabs or horizontal menu items because of the colour scheme. I've read several troubleshooting suggestions but none seem to properly apply.

    Which account your talking about
    *Support.mozilla.org ?

  • MacBook Air suddenly doesn't recognize my keychain passwords. Now iCloud, Safari and anything associated (including Systems Preferences) won't work.  Plz help - any ideas?

    The only thing I can think that I've done differently is that I'd downloaded a scanner driver from Canon.  Everything worked fine for days after that.  It wasn't until I shut down the computer and restarted it that I keep getting these prompts to enter keychain passwords and it rejects the only passwords I've ever used.  No idea what to do.  Any help would be greatly appreciated!  :-)

    I just found the fix in another post!  Here it is, in case anyone has the same issue...
    http://support.apple.com/kb/TS5362

Maybe you are looking for

  • Certificates no longer work for signing when moving to Acrobat XI

    Hello, At my organization we have vendor-supplied certificates (x.509 v3) that we use to sign PDFs.  These certificates function correctly with Acrobat 7, 9, and X (mix of XP and Win7).  When attempting to sign a PDF in Acrobat XI (Win7), an error is

  • How do I stop IN CLAUSE when query a hierarchy of object.

    I have a base class which is annotated with @Entity(name="UdmHierarchyObject") @Table(name="UDM_HIERARCHIES") @Inheritance(strategy = InheritanceType.SINGLE_TABLE) public class UdmHierarchyObject ... I have a single table hierarchy of objects which u

  • Price difference by percentage

    Hi experts, I need to configure for below scenarios I have to raise a purchase order to a vendor for  Procuring gold. The Purchase order will be in KG. But the price get varies based on the purity of gold. If i set 100% purity of gold is Rs. 1000. Wh

  • HT4059 How can I cancel a pre order in ibooks

    I need to cancel a preordered book on iBooks with my iPad... Help

  • Azure MFA Server activation fails

    Hi, I installed the Azure MFA on my ADFS server and I cant activate it. It fails with 'Activation fails' error. All the required ports are opened and I have also tried different internet connections. How can I troubleshoot this issue? Best, Kaido