Email problem after system patch

hello,
Since we updated our system, last week
Kernel level from v.139 tov.155
BASIS : 61
ABA : 61
HR : 58 / 59 / 60 / 61
And when send and email, with a user with a name containing extented characters like (eg: ç or é), the sender is not displayed properly when the email is recieved.
we have : iso-8859-1?Q?=22Qu=E7entin_DUBOIS=22?= =?us-ascii?Q?= ...
in place of a real name
does anyone knows how to manage that ??
thanks
Good day
Quentin

Thx that's what we did, but no answer so far.
thx for the answer
quentin

Similar Messages

ECC6 SR3 on fighting the problem of system patches

ECC6 SR3 on fighting the problem of system patches
My system is ECC6 SR3, and the installation of the system, PI-BASIS patch version number is the first 2005_1_70C months SAPKIPYJ7E How do I upgrade to the PI-BASIS this patch 2006_1_70C how the patch SAPKIPYM01 play ah?
thanks

You will need a delta package for this component to upgrade it to 2006_1_700
Go to -> service.sap.com/swdc
         -> Installations and Upgrades
         -> Plug-Ins
         -> SAP Plug-In
         -> PI_BASIS
         -> PI_BASIS 2006_1_700
The patches for 2006_1_700 you will find at similar path to above just replace "SAP Installations and Upgrades" with "SAP Support Packages". See [Note 1007796 - Installation/Upgrade Basis Plug-In (PI_BASIS) 2006.1|https://websmp106.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1007796&_NLANG=E] for further information.
Regards,
Nelis

Problems after applying patch 5 of CM & Collaboration on EP 6.0 SP2

hi everyone.
here is the problem
we recently applied patch 5 for CM on EP 6.0 SP2
the portal platform is at patch 27.
after having applied the patch the logs indicated that the upgrade sequence completed successfully.
however after we restarted the portal and logged back in none of the KM repositories are accessible. it just says not found / is not accessible or is not available.
under system admin when we go into Content Management Configuration it says invalid Repository Managers.
i have reset the SAPWCM user password and check the connection pool settings but still nuthin.
i have checked the cm.properties and config_local.properties files. however i have no document to compare what the correct format of the entries in these files is. i know they are supposed to have identical entries.
can somebody help?
thanks

Hi,
I had the same problems after patching CM. I had to re-enter the WCM password of the 3 CM Conenction Pools in the CM Configuration under "jdbc connection pools".
Hope this helps
Cheers,
Jochen

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

Exchange profile parameter problem after system copy of XI server

I'm getting problem after the system copy of XI server. Following is the details. pls help to fix this one:
XQA is the system copy of XDV server. XQA is installed on rx2n1v1 server and XDV is installed on dbcixdv server. Following is weblink of XQA and XDV.
XQA: http://rx2n1v1:57400
XDV: http://dbcixdv:57000
After the system copy of XQA, i changed all xdv related parameters (hostname/port) in visual admin and configtool of XQA server.
Now when i run sxmb_ifr tcode in XQA, it should open the link of XQA server ( http://rx2n1v1:57400). But it open the link of XDV server (http://dbcixdv:57000).
The cause of this problem is the xdv parameter entires (hostname/portnumber of xdv) in exchange profile of XQA server (http://rx2n1v1:57400/exchangeProfile).
Now if i change hostname/portnumber of xdv in XQA server (http://rx2n1v1:57400/exchangeProfile), it also make the same change in XDV server (http://dbcixdv:57000/exchangeProfile).
Both XQA and XDV are in differnet hardware server. I don't understand why making changes of exchangeprofile in XQA also changed the value of exchangeprofile in XDV.
Hope it clarify.
Pls give the solution of this problem.
Thanks
Amar

Arjun,
http://<SAPHOSTNAME>50000/exchangeProfile
Yes, I can use above, but changing connection information gives me
RFC call returned an error code: 399
Use this one
http://hostname:50000/webdynpro/dispatcher/sap.com/com.sap.xi.exprofui/XIProfileApp
This one, yes I get to the exchange give me an error: RFC call returned an error code: 399
http://hostname:50000/dir/start/index.jsp -->Administration -->login with PISUPER -->ExchangeProfile.
Internal Error
Internal error; contact your system administrator
Unable to read configuration data (ExchangeProfile/aii.properties)

System problems after applying patches

Hi all,
I was patching our netweaver 2004s system and now I am not able to use any transaction anymore.
First I updated the Abapkernel and the SPAM itself. Then I started applying the Abap support packages. I had no problem applying patch level 7 and 8. When I imported patchlevel 9, the system did not respond anymore. Every time I tried to execute a transaction I got a shortdump.
Do you have any idea what could be the problem?
We restored the system and now I got a similar error already when updating SPAM.
Thanks & Regards
Cornelius

Hi,
Just try to run RSXMB_ACTIVATE_ICF_SERVICES program from SE38 and see whether it works or not.
---Satish

[SOLVED] Boot problems after system upgrade

hi everybody,
first of all i have to say, that the machine where i installed Arch is pretty old (something around 5 years).
I already tried installing Arch two times and every time after i performed a system upgrade, i couldn't boot arch.
Before the upgrade i rebooted several times to ensure that its working with the brand new installation - it worked.
Here i'm the 3rd try. This time i configured packman to ignore the kernel package and voila its working now with kernel 2.6.25.6-1.
So, here is my question: Is there any problem that could appear later on if i never upgrade the kernel?
I'm quite new to linux and really appreciate your support.
Regards
Daniel
Last edited by mrorange (2010-02-25 21:35:32)

Well ... the kernel, like any other piece of program, from time to time has to be patched if they find a bug in it.
Never upgrading means that you do not get the benefit of security and improvements patches.
There is also the issue that some programs, a few, may want to have a certain kernel to run but I think that is less common.
I, for instance, have not upgraded the kernel for a few months now because it screws up my wifi.
If you can live with that then you are OK.
R.

Xperia z1 Problem AFTER system update to latest software 14.3.A.0.681

Hello people, First of all let my just say that I am new into the ''smartphones world'' so please excuse my queries if they proof to be 'obvious' to you! I have carried out a system update to my Xperia Z1 phone yesterday (Android 4.4.2. kitkat, latest available software 14.3.A.0.681). The update seem to have been correctly performed. However I have since encounter the following issues/problems with my phone and do not know how to fix them: 1) First of all my phone will no longer rotate...why is this? Is this related to the update?? Pictures/photos can no longer rotate and also phone screen does no longer rotate! Why is this..? 2) Second the 'Notifications Bar' structure has changed : is this also the result of the update or can I do something in settings to fix it and make it as before? When I scroll dawn the notifications bar, the icons are no longer displayed at the top line but are instead spread underneath BUT this is AFTER I press 'Quick settings'. 3) Battery signal icon has changed completely: no lines included inside icon to show usage but instead usage %age is now displayed. Also, when I charge my phone, there is no icon flashing as before and now lights flashing.. 4) Also when I want to use the phone after it has remained unused for sometime it states 'swipe to unlock' and makes a 'funny' note upon performance of the act: this was not the case before.. Can you please help me with the above? I am freaking out because I am excited with my new phone and would love to make full use of it properly but it is a bit hard for me since I have no clue how to fix issues/problems appearing every now and then since I am new into these things.. Thanking you in advance

Hi there,
I think you have fixed your 1st issue.
2) Yes, Kitkat has changed the Notification Bar structure. Its a bit annoying, but to get around it you can use Widgets - Tools and select the Icon, such as WIFI to be placed on your home screen to avoid multiple clicks. You cant do anything in the settings to make it like before.
3) Battery Signal Icon - Again a Kitkat update has done that. The good thing is that it has enhanced Battery life considerably.
4) I am assuming you are stating about the "sound note" it makes when you swipe in. Thats again a Kitkat feature and you can get rid of it though Sound settings if you dont like it.
Reality is that Kitkat runs very well on Google Nexus 5. Apart from that it has issues on every other Android power Smartphone out there. I also own a Nexus 4 who recently got upgraded to Kitkat and compared it with Nexus 5. Was not impressed to be honest.
As of my upgrade on Z1, I have been facing Volume issues. When I play a video the volume is minimized for some reason. Pause and play again and it goes to Normal. I have to reboot it sometimes to play normally. It also takes ages to connect to my 3G provider, whereas previously it was fast enuf. I hope the next upgrade will fix those issues.

Small problems after system update

I have a couple of problems which appeared after a recent pacman update. A lot of stuff was updated, including the kernel and xorg.
1) Shutdown stalls at "Save system clock".
2) Ctl-Alt-F(1-6) doesn't get me out of X11. Actually, this works sometimes, but usually not.
I could fix these, if I knew where to start. Can anyone help me with some diagnostics? I have a pretty simple setup, no desktop, just ratpoison and the apps I need for work, mail, web.
Can I redo an update, and if so, how? Is there (ever) any point in doing that?

man hwclock:
--directisa
is meaningful only on an ISA machine or an Alpha (which implements enough of ISA to be, roughly speaking,
an ISA machine for hwclock's purposes). For other machines, it has no effect. This option tells hwclock
to use explicit I/O instructions to access the Hardware Clock. Without this option, hwclock will try to use the
/dev/rtc device (which it assumes to be driven by the rtc device driver). If it is unable to open the device (for
read), it will use the explicit I/O instructions anyway.
The rtc device driver was new in Linux Release 2.
So as you can see, directisa is something that SHOULDN'T do anything on your system, but for some reason it is failing. I'm guessing it is very specific to your hardware, though I've never heard of this happening.
Last edited by codemac (2008-02-11 05:13:04)

Wireless problem after system update

After installing system updates to OS X 10.3, the system stopped connecting to my wireless network. I'm pretty sure the updates were the cause, because I downloaded and installed the updates over the wireless network. The problem is not in the network hardware, because I am posting this thread over the same network from and IBM Thinkpad (that still works on the network).
The iBook can see and connect to the network, but it does not recieve and IP address. Any assistance would be appreciated.

I found some fixes to this problem if anyone is interested:
http://www.wwco.com/~wls/blog/2007/01/27/apples-security-update-2007-001-for-air port-breaks-internet-connectivity/

MySQL socket problems after system update

I have been using my new Mac Mini Snow Leopard server as Squeezebox Server for over a month wihtout problems. After a system update this weekend I started to get MySQL socket errors after reboot.
Started; log sequence number 0 43655
091213 17:10:04 [ERROR] Can't start server : Bind on unix socket: Invalid argument
091213 17:10:04 [ERROR] Do you already have another mysqld server running on socket: /Users/admin/Library/Caches/Squeezebox/squeezebox-mysql.sock ?
091213 17:10:04 [ERROR] Aborting
Although I have posted this issue to the Squeezebox forum (http://forums.slimdevices.com/showthread.php?t=72510) where it primarily belongs to I wanted to hear if anyone maybe had an idea what recent changes in Apple updates could cause this? Maybe someone else has similar MySQL problems with other installations? I am a bit desperate by now so any idea or hint is appreciated.

Here was my solution/workaround for this issue to the rest of us poor fellas that have too fight around with Squeezebox server from time to time:
I setup SBS to use the the standard MySQL installation on Mac OS X SL Server since I could get it to run without problems from Server Admin. Here are the instruction from the SBS Wiki:
http://wiki.slimdevices.com/index.php/ExistingMySQLInstance
However, I had to deviate a bit from that in order to make it work since it seems a bit outdated.
First deviation was necessary for the MySQL access privileges. Notice the extra grant to slimserver@localhost. Don't ask me why but this worked. I do also not know whether both grants would be necessary because I haven't tried it. Feel free to improve it:
# mysql -u admin_user -p
Enter password: admin_password
Welcome to the MySQL monitor.
Commands end with ; or \g.
Your MySQL connection id is 103 to server version: 5.0.24a-log
Type 'help;' or '\h' for help. Type '\c' to clear the buffer.
mysql> create database slimserver;
Query OK, 1 row affected (0.22 sec)
mysql> grant all on slimserver.* to slimserver identified by 'slimserver_password';
Query OK, 0 rows affected (0.13 sec)
mysql> grant all on slimserver.* to slimserver@localhost identified by 'slimserver_password';
Query OK, 0 rows affected (0.13 sec)
mysql> flush privileges;
Query OK,
mysql> quit
There were also slight differences necessary in the preferences setup because MySQL socket location was different from the standard one. Here are my db entries ~/Library/Application Support/Squeezebox/server.prefs:
dbpassword: slimserver_password
dbsource: dbi:mysql:database=slimserver;mysql_socket=/var/mysql/mysql.sock
dbusername: slimserver
Notice the extra mysql_socket configuration.

ODS/PSA Problems after System Copy

Hello All....i am a basis admin and am having problems with PSA after performing system copy. I have copied R/3 (source system) ans SCM (source system) and BW (3.5)systems from production into test environment in parrallel. I have performed all required BDLS steps on R/3, SCM, and BW as well as maintenance of RSLOGSYSDEST table. All profiles and ports (we20/we21) have been maintained as well. I have modified and tested all RFC connections and have used RSA1 to restore the source system connections and to activate and replicate. When activating ODS objects, the following error is generated...
There is no PSA for InfoSource 8ZFAP_O01 and souce system PB1CLNT510.
PB1CLNT510 references former production BW logical sys and correct logical sys should be QB1CLNT510. Apparently BDLS has missed a table or I have skipped a step in my post-clone process of BDLS and WE20/21. I am wondering if there is a re-initialization or logical system conversion step i have missed or is anything else i can do to resolve this issue.
Maximum points awarded for quick resolution.
Thanks in Advance
Chris
Basis

Hello Chris,
This InfoSource is related to a DataSource in which the source system is BW system itself (in your case: QB1CLNT510).
Try to first activate the DataSource 8ZFAP_O01 using the standard program (SE38): RS_TRANSTRU_ACTIVATE_ALL in which you should input the source system (QB1CLNT510) and the InfoSource 8ZFAP_O01. If you get a green light in the log that appears after the activation completes in which it says that all the structures have been activated, then all you need is to locate the DataSource in RSA15 and right click -> replicate.
If the log showed you that this DataSource doesn't exist, then you'll need to Activate the source system QB1CLNT510 again.
I hope this helps. Cheerz,
Ali

Myself Source system problem after System Copy

Hi All,
We recently did a system copy (Production -> Dev). After the logical system rename is done, the myself source system is showing up as a External SAP system, in source system tree under SAP instead of BI. I'm not able to restore/activate it. Any inputs on this problem is appreciated.
Thanks & Regards,
Sree

Problem was with inconsistency in the RSBASIDOC table. Solved by deleting invalid entry and running BDLS again for this specific table.

Problem after system copy

Hi
We have taken a copy of our production syatem to our sandpit.
The problem is that everything has gones well (BDLS etc) but in our source systems in RSA1 (BW) it correctly has the technical name of the source system but when right clicking and selecting chnage the rfc destination is incorrect (it is the fake one we created).
You cannot change this field by right clicking and if i try to create a new one then after selecting the source system it says it already exists as the fake one is using it.
The opnly option i seem to ahve is to delete the incorrect one but it asks if i want to delete all psa tables and transfer rules...this seems a bit too much deletion for me.
Is there anyway around this??? Can i maybe delete the fake one in SM59??
Cheers
Andy

Hi Andrew,
did you already follow what described in this useful doc ?
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
Hope it helps!
Bye,
Roberto

Problems after installing Patch KMCWPC14P_2-20002294.SCA - please help!!!

Hi,
I had a problem creating links with the WPC (SP14). After downloading and installing the patch
Support Packages and Patches => SAP NetWeaver => SAP NETWEAVER => SAP NETWEAVER 7.0 => Entry by Component => Enterprise Portal => KMCWPC14P_2-20002294.SCA
I am not able to create any kind of links anymore (not even via URL). What can I do now? PLEASE HELP!!!

Hi,
Have you read these notes ?
Note 1080110 - Installing or Updating Web Page Composer
Note 1156141 - Updating WPC from SPS 13 to a higher SPS
Note 1114029 - Web Page Composer: Known issues in SP14
Patricio.

Email problem after system patch

Similar Messages

Maybe you are looking for