Email problem on Z10 after upgrade to rel 10.1.0.273

My Zimbra email uses MS ActiveSync which worked perfectly on my Z10 until I did a software upgrade to BB10 rel 10.1.0.273 . Now my email does not work anymore. Error :" Your device is connected to a network, but the Internet service is not available.Check your network settings" I am sure Z10 users had the same problem. Can anyone help?.

thats also the case for POP3 and SMTP on my Z10, update is missing something on the email front, it was a little sceachy before the update
Regards
Marcain

Similar Messages

ICloud email won't work after upgrade

iCloud email won't work after upgrade to Mountain Lion. Says pop 3 server is timing out. Solutions?

I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
My problem is TWO FOLD.
The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
Along with the original poster, I'd appreciate any help.
As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

Z10 not able to call oversea after upgrade to version 10.1.0.273

I live in Thailand and I usually make call to Malaysia using 009 service from CAT. The full number will be 0096057163xxx and I have been using 009 services for more than 10 years. After upgraded to version 10.1.0.273, I'm not able to make oversea call with 009 services. The reply is "The number you are calling is not in service", I try call with other mobile phones and everything work as per normal. I doubt the the latest version are not able to read and dial the first 2 digits "00". Please help to provide a solutions.

Checked with BB call center Thailand and they have not received similar complain from other customer, no solutions neither. I try making oversea call with 001, 007 and 008 follow by country code, all having the same problem. Especially for 008 follow country code 60 (Malaysia), it ends up calling to China. It seems like the firmware do not recognized the 3rd digit as it read it as 'country code' instead of international call service offer by CAT Thailand. This is really PISS me off and I hope RIM can do something about it!!

Old emails won't load after upgrade to Mountain Lion

old emails won't load after upgrade to Mountain Lion

See if anything in here will fix it:
1. Hold down the Command and Option keys as you click the iPhoto icon.
The Photo Library First Aid window opens:

Problem extending VO after upgrade to JDev RUP6

We are having problems extending VO after upgrading from JDev CU2 to JDev CU6. The extended VORowImpl java file extends the OAViewRowImpl instead of the VO that we are extending. Other files are fine except for the VORowImpl
Is there any JDev setting we need to set for CU6?
Any help/insight is appreciated.
Thanks,
Ramesh

Hi,
R u mean to say ur extended VO's changed automatically,or ur having problem extending the new VO's.
Thanks

Email disappear from Z10 after some time

My Z10 OS is 10.2.1.2141. When I only have handheld on, email appears. I didn't open the messages. After some time (not sure the exact time, perhaps a hour or so), my messages got deleted from the Z10. I then opened my email client on my computer desktop, it never download the messages. It looks like the messages were deleted from the mail server via Z10. This happen ever since I upgraded my Z10 OS.
I had removed my email setup in Z10 and reset it. It doesn't seem to solve this problem.
In the 'Display and Actions', I had set the 'Messages' with 'Delete on Prompt'.

More info to my trial to bypass the problem. I had deleted my email and recreated by setting 'Email SYNC timeframe to FOREVER'. Now my email stays with my handheld a bit longer than before - several more hours regardless I opened the email in the handheld or not. The nightmare is that those email also got deleted from my email server. I then no longer to access those email through Outlook.

[SOLVED] Problem with murmur after upgrading to 1.2.3-4

I've been running Murmur on my server for a long time without problems. The last version I had running was 1.2.3-3. After upgrading to 1.2.3-4, the already-running murmurd process crashed after a while (some hours after the upgrade, after constant use) and I'm unable to restart it. The message I get is:
:: Starting murmur [BUSY]
<W>2012-01-07 22:06:11.133 Initializing settings from /etc/murmur.ini (basepath /etc)
<W>2012-01-07 22:06:11.134 OpenSSL: OpenSSL 1.0.0f 4 Jan 2012
<W>2012-01-07 22:06:11.134 SSL: Adding recommended CA StartCom Certification Authority
<W>2012-01-07 22:06:11.134 SSL: Adding recommended CA AAA Certificate Services
<W>2012-01-07 22:06:11.135 SSL: Adding recommended CA UTN-USERFirst-Client Authentication and Email
<C>2012-01-07 22:06:11.135 Successfully switched to uid 1007
<F>2012-01-07 22:06:11.230 ServerDB: Failed initialization: unable to open database file Error opening database
[DONE]
and in murmur.log nothing gets written. Downgrading to 1.2.3-3 works, but I thought I'd look for the cause of the problem.
After poking around a bit, I noticed that my murmur database (/var/lib/murmur/murmur.sqlite) belongs to a nonexistent user with a UID of 86 and a GID of 86, as well as the whole /var/log/murmur/ directory. I also noticed that a new murmur user and group with UID and GID of 1007 and 1000 exists on the system now. It seems that running:
sudo chown -R murmur:murmur /var/lib/murmur/ /var/log/murmur/
fixes the problem. Perhaps the update deleted my pre-existing murmur user and group and recreated them?
Edit: Guess I should mark this as [SOLVED].
Edit edit:
Also turns out the whole /var/lib/murmur/ directory has to belong to murmur, not just the sqlite file.
Last edited by n17ikh (2012-01-08 03:22:39)

I had the same problem and fixed it like you.

Problems with 8310 after upgrading to V4.5

Alright I will start with my phone it has locked up and my alarm doesnt work all the time. I have taken the battery out and restarted it, this sometimes works but then it is back to not working again. My husbands phone is much worse it crackles real bad then it turns off. We werent having any problems with these phones until we did the upgrade. Is there someway to fix it?
Thanks
Jenn

Sorry Made mistake.... Disregard first post
TRY THIS
Had some problems after upgrade from tiger to leopard ...Clicked on mail and It wouldnt open.
Had to click on tool bar on top window/message viewer to see my inbox and stuff, then force quit to get out... plus email didnt work
checked all POP settings which were correct( I know cuz I looked at my macbook pro's POP settings and did the same on Imac)
Anyhow...called apple care ...EZ fix
Quit mail if yer on.
Go to Home folder/Library/mail/shiftClick on messageRules.plist And messageRulesplist.backup
Drag and drop messageRules.plist And messageRulesplist.backup to desktop... then highlight preferences folder and drag into that folder
If yer POP settings r right this should work
It did fer me!!!
Good luck
Message was edited by: soboo
Message was edited by: soboo

Problems with Mail after upgrading to 10.5.6

I was using my mail program without problems, until I upgraded to v 10.5.6 - when I tried to 'get new mail' I received the following message:
There may be a problem with the mail server or network. Check the settings for the account or try again.
The server error encountered was: The connection to the server on port 110 timed out.
I contacted my email provider (shaw.ca) and there are no problems with their server. So, I added another email account to check if it was the program, and I'm getting the same response with the new account I added.
Has anyone come across this issue? Any advice? Thank you!!

Sorry Made mistake.... Disregard first post
TRY THIS
Had some problems after upgrade from tiger to leopard ...Clicked on mail and It wouldnt open.
Had to click on tool bar on top window/message viewer to see my inbox and stuff, then force quit to get out... plus email didnt work
checked all POP settings which were correct( I know cuz I looked at my macbook pro's POP settings and did the same on Imac)
Anyhow...called apple care ...EZ fix
Quit mail if yer on.
Go to Home folder/Library/mail/shiftClick on messageRules.plist And messageRulesplist.backup
Drag and drop messageRules.plist And messageRulesplist.backup to desktop... then highlight preferences folder and drag into that folder
If yer POP settings r right this should work
It did fer me!!!
Good luck
Message was edited by: soboo
Message was edited by: soboo

Problems with Mail after upgrading to 10.9.1

I am running into problems with Mail after installing 10.9.1. I had NO problems with Mail prior to this update.
Problems I have encountered so far are:
- I don't receive some e-mails on my Gmail account.
- I have sent e-mails that supposedly got "sent" but do not show up in my Sent box both on mail and on web Gmail. My Outbox is empty also.
Has anyone encountered the same problems and found a solution?
Thanks in advance!

Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
Strange thing is I receive mail OK, just cant send.

I cannot compose or reply to email messages in gmail after upgrade to 3.6.12. Shows :Loading". Gmail works ok in IE.

After upgrade to 3.6.12 Firefox I cannot compose an email in Gmail. Shows that Gmail in "loading".
Gmail works in IE. No problems before upgrade.

Did check the pref dom.storage.enabled and make sure that the value is true?
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Cannot email photos from iPhoto after upgrade to 10.8

After upgrading to 10.8, I have not been able to successfully eamil photos from iPhoto. I can select the photos, click the email icon, and have Mail open with the photos attached (as expected). But the send button is grayed out, and the newly created message window cannot be closed. To get rid of the unsendable email, I have to quit or force shut down Mail, then reopen Mail and manually delete the email from Drafts.
Has anyone else run into this issue?

As Larry suggested go into iPhoto's Accounts preference pane and make sure your email account information is correct. If you joined iCloud that is a must.
OT

Silent email and sms notifications after upgrade to iOs 5.1

After upgrade to iOs 5.1 my iPhone 4S makes no sound when arrives an email or a sms. Is it a bug??

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Email problem on Z10 after upgrade to rel 10.1.0.273

Similar Messages

Maybe you are looking for