Email Problem with Pearl Flip 8220

I have the Pearl 8220 and all of the sudden when I compose a new email and when i try to send it it gets booted right back to me with the red x next to message. I can though reply to emails , they get sent no problem. I did a wipe of the handheld according to RIM but the problem still exits. I use msn as my email.
Thanks
Solved!
Go to Solution.

check these links for possible cause and resolution:
http://www.blackberry.com/btsc/KB16209
http://www.blackberry.com/btsc/KB14509
Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

Similar Messages

Many Problems with pearl flip

intermittent: no ring, no vibrate, dropped calls, flipping networks, typing erratic, slow dial, slow wifi, can't change from letters to numbers when typing, too many problems,,,, got to get rid of this, I need to have a reliable cell phone to keep in touch with my business.
I even tried calling my blackberry ( sitting next to me) from the landline phone on my desk, and it went to answer machine and did not ring.
I have to keep changing the network setting to manual to keep on Rogers, but I live on the border and when I move around near the border, I have to keep changing back to automatic so it will pick up calls.
A BIG NUSIANCE !
I thought blackberry was the best.... I was wrong.

hey ODub,
before all of this started, was any software installed or removed ?
and before the bios was updated, was the unit freezing less or more ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Pearl Flip 8220 - unable to reload OS

Dear all,
I am using a Pearl Flip 8220 (T-Mobile unlocked version) in INDIA.
Recently I gave the handset for OS reloading as I was getting a 'Call Failed' message frequently. None of the repair shops could resolve the issue & hence I decided to wipe the existing OS (on my own) and reload the latest one by downloading it from BB website for my carrier (Airtel). I wiped the existing OS using BBSAK and tried loading the OS.
But since then I have been facing issues and not able to do it. While trying to load the OS, the handset restarts automatically, for some reason, and the loading ends abruptly. I have observed that this happens while the applicaion tries to load 'net_rim_cldc.cod'.
I would be extremely grateful if somebody has come across the scenario and can help me resolve it. Am not very familiar with the installation, but did go through a few suggestions given by a members on CrackBerry & other forums.
Sharan
Sharan Mishra

Hi Sharan,
Try just following the steps here:
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
If you still have problems, it may be necessary to reload the JVM on the device as well. To do that, go to the Start button on your computer and in the search box, type "cmd" (without the quotation marks). This will open the DOS command box. Type the following exactly as written below:
cd c:\program files (x86)\common files\research in motion\apploader\
Press enter (note, if your computer runs a 32-bit version of Windows, do not include the (x86) part, so instead type "cd c:\program files\common files\research in motion\apploader", minus the quotation marks and press enter).
Next, type:
Loader.exe /nojvm
Press enter again. This will now open the Loader file in a way that will also reload the java virtual manager on the device, which should help.
If that still doesn't work, let us know. Good luck!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Pearl Flip 8220

Hi All,
I just bought a Pearl Flip 8220. Received it two days ago and have been using it as a normal phone while waiting to register with my service provider. This morning for no apparent reason the phone blanked out and all I can get now is the red LED indicator light intermittent with the white background and (wait- loading) clock. I have tried taking the battery out and replacing to reset but to no avail. Any ideas?

Welcme to the cmmunity supprt frums
I would probably have them send me another one. Sounds like you may need to reload the OS. It is something that can be done but if it is a new phone, I would want a new replacement.
Thats just me.... others will be here to give you direction as well! Glad you are here! Enjoy your stay ... and most of all enjoy that BlackBerry
Nurse-Berry
Follow NurseBerry08 on Twitter

I am having email problems with the new Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help

I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. Thanks

Apple - Support - Mail Setup Assistant

Is the display on Pearl Flip 8220 sharper that the one on my 8310?

Does anyone know why the display on a Pearl Flip 8220 seems sharper than the one on my 8310? Is it the 4.6 OS or the actual display?
Man, I want a 8900......
Neil

http://na.blackberry.com/eng/devices/compare/product-attr-compare.jsp?products=583&products=1497

RSAP connectivity problem with Pearl 9105 3G

Hi,
I have a problem to connect the Pearl 9105 3G with Skoda Octavia Radio?
Previously I had no problem with Pearl 8110.
Can anybody please help? Thanks in advance

Hello vats,
Welcome to the forums.
In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
Link: http://www.blackberry.com/btsc/KB03621
Once completed test it and proceed with a selective restore, here is how to restore http://bbry.lv/qgQxLo
Hope this helps. Have a good day.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Email problems with BB synched via BES. No email notifications and can't send replies.

This isn't a question, but more of a public service announcement for those like myself that manage to screw up their email settings. I recently had problems with my email in that I would not get audible or visual notifications of new email and I couldn't send replies although I could forward and create new emails. The problem is that I am using Desktop Manager on two PCs and only one is configured to access my corporate email account, the one that is redirected to the BB. The default settings of my Desktop Manager installation was to synchronize the device date and time automatically when connected to the PC. Connecting my BB to my home machine would cause the email problems. I had to wipe and reactivate to fix my problems.
So, if you want to use the BB on two PCs and one is not configured for the email account going to the phone... disable the auto synchronization option BEFORE connecting the device to that machine and launching Desktop Manager. It would also be nice if the Desktop Manager installer had an option to install on a PC that is used for backup/recovery and application loading only. The installer had two options IIRC and your choice was that the BB is used with BES or with a personal email account.

Internally, your invites are processed by the server.
If an outside sends a new invite to you, the server doesn't know about it until you add the event to your calendar app.
You'll find settings in Mail and Calendar apps (depending on client OS) to automatically add invites to the Calendar.
So to sum it up.
Internal users, processed in real-time directly by the server
External invites, must be processed by the client app, and depending on OS/Settings, could require manually adding or acknowleding. Also.. in 10.7/10.8 you will see an inbox tray in the Calendar app, your invites may show up there (and you'll need to click to ack)
Hope that helps.

Email Problem with Mac

Hi, I am new to FIOS so I hope this is the proper board to post in. I set up 2 subaccounts for verizon.net email and configured them for my Mac Mail program. Everything worked well for about 2 days, and all of a sudden the Mail program keeps asking for my password (even though it was saved in my Mail settings) and says the the incoming mail server is offline. I've Googled this issue and see that others have posted about the same authentication error. Has anyone else here experienced - and solved - this problem? Thanks.

I am having the same problems with Mac eMail. I have two Macs, one that is running Lion and the other is running Snow Leopard. I have spent days on the phone with Apple and Verizon and they are blaming each other and neither have a solution. Have you been able to get a response? It looks like this is something that happens from time to time but never really gets fixed.
Please let me know if there has been a fix since the Mac Mail update in July? With the Union Issues Verizon doesn't have enough people to address the issues both in person ( I had a tech come to the house and he didn't know anything about software ) or on the phone. They keep kicking it back to Apple. I also have a couple iPhones and both are working fine. So this seems to be OS X specific. I've had Macs and iPhones for 3 years or more.
Just makes me think something was done to the mail servers they didn't get correct.

Traditional chinese language support for pearl flip 8220?

I just got a pearl flip from T-Mobile. I'm happy with most features, however, there is no Chinese language support whatsoever. All the Chinese characters show up as black boxes. Anyone know of any fixes so that I can read and input Chinese (traditional Chinese)?
Solved!
Go to Solution.

Your device OS does not support chinese symbols.
Ask your wireless provider for a multi-language device OS that supports chinese characters.
Otherwise - check a chinese wireless provider for device OS. But note that your wireless provider disfavor use of device os from another wireless providers.
If you decide to use OS from another wireless provider - use OS exactly for your device model.
Install OS package on your desktop computer. After that delete Vendor.xml file from installed files on your desktop PC.
Connect your device to the computer and update device OS via Blackberry Desktop Manager/Application Loader.

Extended notification by email problems with htmlb:link

Hi,
Have problem with link
using
<htmlb:link id ="action"
reference= "<%= LINK_URL %>" >
everything is fine till the END
link is shown OK
<a class="sapLnk" id="action" href="link" target="blank"> etc.
but
when i receive email
link is with additional "D" char
can`t get out where it is adding it.
<a class="sapLnk" id="action" href=D"link"" target=blank"> etc.

Did some investigation.
After MHT file goes to SODD table (and all related ones, where page is parsed to HEX)
In conversion from hex to soli
all quotes in HTML e.g. " are converted to =3D=22 text =22
3D is mark of '=' in HEX
=22 is mark of " in HEX
and in some part of document display soli table content all these 3D=22 are replaced by related ascii symbol.
still can`t get why in all code those 3D=22 and =22 are replaced but in href not. Encoder (some where at point of hex-to-soli and vice versa )is adding only D after href in link (<a href="link">text</a>)
tried to hardcode link without quotes
e.g.
<a href=link>text</a>
encoder added "D" before link and quote after.
<a href=Dlink">text</a>

Outgoing email problem with Gmail via ATT

I'm posting this on behalf of my mom, who's at her wit's end with her Mail program.
She has AT&T DSL service, and uses Gmail for her mail. Also, she's running 10.5 on a Macbook. We've tried fiddling with things every since she got the system in the spring, but she's consistently had trouble connecting to the Gmail server, especially regarding outgoing email. Most of the time it takes forever for a message to send, if it ever sends at all.
I use Comcast and Gmail and have never had any problems, which leads me to believe that this may have something to do with ATT(/Bellsouth). Any guidance would be greatly appreciated!

I have same problem with Apple Mail at ATT as ISP. I used the program ATTYahoo!EmailSetup from their website. Now I can rarely send any email, from my work email or from my MobileMe email. I seems like that program messed up the entire Apple Mail client so it can no longer send mail. Emails I try to send just sit the in Outbox. Does anyone have a solution?

Sending email - problems with text in email body

Hello all,
for sending emails I use the FM from Thomas Jung (<a href="http:///people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface:///people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface).
Everything works fine, except that the text I attach in documents-content_text doesn't appear as a normal text in the email body but within an .EXT-attachment. Should this be a TXT attachment?
E.g. when I send the text 'Hello World' the email arrives with an attachment 'Hello World.EXT'.
Did anyone have the same problem? What's wrong?
Thanks for your help.
Regards
Joschi

Try this it works fine for me,
METHOD email_result_as_pdf.
    DATA: lo_document_bcs    TYPE REF TO cl_document_bcs VALUE IS INITIAL,
          lo_send_request    TYPE REF TO cl_bcs VALUE IS INITIAL,
          lo_sender          TYPE REF TO if_sender_bcs VALUE IS INITIAL,
          lo_recipient       TYPE REF TO if_recipient_bcs VALUE IS INITIAL,
          lo_cx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL,
          lo_cx_send_req_bcs TYPE REF TO cx_send_req_bcs VALUE IS INITIAL,
          lo_cx_address_bcs TYPE REF TO cx_address_bcs VALUE IS INITIAL.
    DATA: li_message_body     TYPE bcsy_text VALUE IS INITIAL,
          li_att_content_text TYPE soli_tab,
          lw_att_content_text TYPE soli.
    DATA: lv_result         TYPE string,
          lv_send           TYPE adr6-smtp_addr
                                 VALUE '[email protected]',
          lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
* Create Object
    lo_send_request = cl_bcs=>create_persistent( ).
* Add Contents to Mail Body
    APPEND 'Dear Sir,<BR>' TO li_message_body.
    APPEND ' ' TO li_message_body.
    APPEND 'Please find the Report contents enclosed.<BR>' TO li_message_body.
    APPEND ' ' TO li_message_body.
    APPEND 'Thank You,<BR>' TO li_message_body.
* Create a Document
    TRY.
        CALL METHOD cl_document_bcs=>create_document
          EXPORTING
            i_type    = 'HTM'
            i_text    = li_message_body
            i_subject = 'New ALV Sample Report'
          RECEIVING
            result    = lo_document_bcs.
      CATCH cx_document_bcs INTO lo_cx_document_bcs.
        lo_cx_document_bcs->if_message~get_text(
                              RECEIVING
                                  result = lv_result ).
        MESSAGE lv_result TYPE 'E'.
    ENDTRY.
* Populate the data to the Document Table
    LOOP AT i_sbook INTO w_sbook.
      CONCATENATE
        w_sbook-carrid
        w_sbook-connid
        w_sbook-fldate
        w_sbook-bookid
        w_sbook-customid
        w_sbook-custtype
        w_sbook-smoker
        w_sbook-wunit
        w_sbook-invoice
        w_sbook-class
        w_sbook-forcurkey
        w_sbook-loccurkey
        w_sbook-order_date
        w_sbook-counter
        w_sbook-agencynum
        w_sbook-cancelled
        w_sbook-reserved
        w_sbook-passname
        w_sbook-passform
        w_sbook-passbirth
        INTO lw_att_content_text-line
        SEPARATED BY cl_abap_char_utilities=>horizontal_tab.
      CONCATENATE cl_abap_char_utilities=>cr_lf lw_att_content_text-line
                  INTO lw_att_content_text-line.
      APPEND lw_att_content_text TO li_att_content_text.
    ENDLOOP.
** Add the attachment to the document
    TRY.
        CALL METHOD lo_document_bcs->add_attachment
          EXPORTING
            i_attachment_type    = 'RAW'
            i_attachment_subject = 'New ALV Sample Report'
            i_att_content_text   = li_att_content_text.
      CATCH cx_document_bcs INTO lo_cx_document_bcs.
        lo_cx_document_bcs->if_message~get_text(
                              RECEIVING
                                  result = lv_result ).
        MESSAGE lv_result TYPE 'E'.
    ENDTRY.
* Set the document to the Send Request
    TRY.
        CALL METHOD lo_send_request->set_document
          EXPORTING
            i_document = lo_document_bcs.
      CATCH cx_send_req_bcs INTO lo_cx_send_req_bcs.
        lo_cx_send_req_bcs->if_message~get_text(
                              RECEIVING
                                  result = lv_result ).
        MESSAGE lv_result TYPE 'E'.
    ENDTRY.
* Create Sender
    TRY.
        CALL METHOD cl_cam_address_bcs=>create_internet_address
          EXPORTING
            i_address_string = lv_send
          RECEIVING
            result           = lo_sender.
      CATCH cx_address_bcs INTO lo_cx_address_bcs.
        lo_cx_address_bcs->if_message~get_text(
                      RECEIVING
                          result = lv_result ).
        MESSAGE lv_result TYPE 'E'.
    ENDTRY.
* Add Sender to Mail
    TRY.
        CALL METHOD lo_send_request->set_sender
          EXPORTING
            i_sender = lo_sender.
      CATCH cx_send_req_bcs INTO lo_cx_send_req_bcs.
        lo_cx_send_req_bcs->if_message~get_text(
                              RECEIVING
                                  result = lv_result ).
        MESSAGE lv_result TYPE 'E'.
    ENDTRY.
* Create Receipient
    lv_send = '[email protected]'.
    TRY.
        CALL METHOD cl_cam_address_bcs=>create_internet_address
          EXPORTING
            i_address_string = lv_send
          RECEIVING
            result           = lo_recipient.
      CATCH cx_address_bcs INTO lo_cx_address_bcs.
        lo_cx_address_bcs->if_message~get_text(
                      RECEIVING
                          result = lv_result ).
        MESSAGE lv_result TYPE 'E'.
    ENDTRY.
* Add Receipient to Mail
    TRY.
        CALL METHOD lo_send_request->add_recipient
          EXPORTING
            i_recipient = lo_recipient
            i_express   = 'X'.
      CATCH cx_send_req_bcs INTO lo_cx_send_req_bcs.
        lo_cx_send_req_bcs->if_message~get_text(
                              RECEIVING
                                  result = lv_result ).
        MESSAGE lv_result TYPE 'E'.
    ENDTRY.
* Set Send Immediately
    TRY.
        CALL METHOD lo_send_request->set_send_immediately
          EXPORTING
            i_send_immediately = 'X'.
      CATCH cx_send_req_bcs INTO lo_cx_send_req_bcs.
        lo_cx_send_req_bcs->if_message~get_text(
                              RECEIVING
                                  result = lv_result ).
        MESSAGE lv_result TYPE 'E'.
    ENDTRY.
* Send Mail
    TRY.
        CALL METHOD lo_send_request->send
          EXPORTING
            i_with_error_screen = 'X'
          RECEIVING
            result              = lv_sent_to_all.
        COMMIT WORK.
      CATCH cx_send_req_bcs INTO lo_cx_send_req_bcs.
        lo_cx_send_req_bcs->if_message~get_text(
                              RECEIVING
                                  result = lv_result ).
        MESSAGE lv_result TYPE 'E'.
    ENDTRY.
* Inform User
    IF lv_sent_to_all EQ 'X'.
      COMMIT WORK AND WAIT.
      MESSAGE 'Mail Sent Successfully' TYPE 'I'.
    ELSE.
      MESSAGE 'Error Sending Mail to External Id' TYPE 'E'.
    ENDIF.
ENDMETHOD.                    "email_result_as_pdf
Regards
Kathirvel

Email problems with wifi

I have a slightly odd problem with my new iphone4 and the email app. It works fine with my POP3 account on 3G and my home router but not with my work network or BT openzone (available via O2). It works occasionally but 95% of the time it just times out and won't collecet email. Safari and the apps store work fine so the iphone is connecting to the network OK. Also I can't play youtube videos over these networks but can run other network services (safari, apps store, maps etc.) Youtube videos however play at home (via my router) or on 3G.
Is there a problem with the network drivers? Or the email app? Or am I missing something.
Any suggestions please! Thanks in advance.

I had problems understanding this configuration too. My intention was to use the native email client but only with Wifi, not with packet data (GPRS, HSDPA etc...). When going into the config menu for >settings>incoming_mail I was also unable to indicate my own Wifi access point. Via trial and error I found the following workaround:
1) define a new Destination in the tools>settings>connection>destination.
2) Define your Wifi accesspoint there and check if it works via webbrowsing for instance.
3) In the Destination menu select is as default destination
4) In the email setup procedure use "default destination" for connecting to your server
5) test if this works by connecting to your email server
I don't know why the email connection setup feels/is buggy. I am under a t-mobile firmware version 11, waiting for update to 12.
Good luck!

Email problems with Iphone 6

I just received my new iphone 6 and took it to a Verizon store to have them set it up for me. My new phone is slower than my old Iphone 5. My emails won't load all of the way and I can only read a portion of the email. How can I fix this? Never was a problem with my old phone!

jenjerwey,
Sorry to hear that the email is not loading properly. Has it been this way since the email account was added? When you go to the email app are the previews truncated to a smaller than previous size or is the email cut-off after you touch and open the email? If you go to Settings> Mail, Contacts Calendars is Load Remote Images on? If not, does turning it on restore the part of the email that you are missing?
BrianP_VZW
Follow Us on Twitter @VZWSupport

Email Problem with Pearl Flip 8220

Similar Messages

Maybe you are looking for