Email Receiver Dynamic User Authentication, is it possible?

Hello Experts,
I have a scenario SAP ECC->SAP PI->Gmail Mail Server, now the interface is working fine, the thing is that I want to configure the user Authentication in a dynamic way, I tried to doit in a UDF in the Message Mapping, using the dynamic values for:
TServerLocation
TAuthKey
fields, but is not working, am I using the correct header fields?, or is there another way to change this parameters?, thanks in advance for your answers.
Regards,
Julio Cesar

Hello Gopal,
Im using Plain, it works fine if I fill up the fields for User and Password in the comm channel, but if I try using the fields in a Dynamic way is not working, thanks for your answer.
Regards,
Julio

Similar Messages

Dynamic User Authentication in JSF, ADF BC Application

I have developed a JSF, ADF BC Application using JDeveloper 10.1.3.3. My application consists of jspx pages and I also have to integrate some existing oracle forms with it using OraFormsFaces library.
I have successfully used custom DBProcLogin Module by Frank to authenticate the users with the help of a stored procedure and user credentials stored in database tables.
During integrating Oracle Forms I realised that some of these oracle forms use get_application_property(username) to retreive connected user information. All of the users which are stored in database tables are also oracle users with the same credentials as stored in database tables. The existing oracle forms based application was connecting to Oracle every time with different provided user credentials each time and therefore returning correct (required) user name information.
Now since I have used DBProcLogin Module in new ADF application, when I run it, user is successfully authenticated but get_application_property(username) in the existing oracle forms returns the user name that application module is using to connect with the database. To make it work correctly, I want my ADF application to connect to oracle database with different user each time.
I have searched and seen topics such as, Dynamic JDBC Credentials, Database Proxy Users etc. But I am confused with the width and depth of this much information available. Therefore, I thought I may get some advice from the experts present in the forum that which of the techniques will go best with my application.
Keeping in view the scenario that I have provided, can someone please guide me to the best suitable technique and the related information/documentation?
Thanks in advance,
Amir

Hi,
the whitepaper you reference is written by the expert on this subject. Samples are posted by the same author: http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html
Note that what you try to do will create a dedicated connection for Forms and ADF, which means that 100 users will have 200 database connections open.
Frank

The User Authentication Methode required by this server can't be found.

Ok, I have a network of iMacs that are bound to OS X Server and the users log in with network based user folders via Kerberos and Open Directory.
This is all working just fine, and all iMac users have full access to all sheared volumes as per the ACLs...
My problem is when any of our office laptops that are not bound to the server and run on local user accounts need to login for access to the AFP shared volumes. ALL but one of these Laptops are receiving "The User Authentication Methode required by this server can't be found." Dialog box when attempting to login. They never even have a chance to enter login names or passwords.
What am I missing? I can't find any settings on this one laptop user account that are any different that the other laptops user accounts...

Steve can you explain more on how I use this Kerberos.app?
I opened it on the one laptop that is working and can see one ticket in the Ticket Cache, and below that there is the same ticket listed with two subentries. All of them are listed as Expired at the moment, but then I have not connected to the server with this system since yesterday...
When I open the App on the systems that don;t work, there are no tickets listed. I clicked on the new button, but the info it's asking for is different than any of the info I found in the working systems Kerberos app... ??? Help.
It's asking for Name, Realm, Password...

Crashing LabVIEW with dynamic user events

Hello,
we are able to execute the attached sample with a german LV 8.2.1 on a Pentium 4 2.4 GHz PC with 1GB Ram and W2K SP4.
However we seem to have problems on a faster machine with an english Windows XP Server but also LV 8.2.1. Could this please be verified?
So start the test, first manualy load the "Button Menue 13.vi", then the "Button Wrapper 13.vi" and finally the "Button Receiver 13.vi".
After this activate "Button Menue 13.vi" and let it run for a short while. After softly stopping "Button Menue 13.vi" with the local "Stop"-button, all VIs should indicated the identical amount of received dynamic user events.
On our local PC we can run sucessfully and quickly to e.g. 10000 events and more.
Attachments:
ButtonTest13.zip ‏52 KB

Hello,
after disabling hyperthreading in the BIOS the english XP Professional and the examples now run nicely!

I want to receive all emails a specific user sends and receives

Hello,
I am a SysAdmin of a medium-sized company, and for different reasons, I would like to configure/implement what the title says.
I would like to receive all the emails a specific user sends and receives without him noticing (even the ones he is CC'ed).
Is this possible? If so, how can I do it?
Note: we are running Exchange 2010.
Thanks in advance.

Note that the CAL requirement is stated clearly in the link I sent:
Standard journaling Standard journaling is configured on a mailbox database. It enables the Journaling agent to journal all messages sent to and from mailboxes located on a specific mailbox database. To journal all messages
to and from all recipients and senders, you must configure journaling on all mailbox databases on all Mailbox servers in the organization.
Premium journaling Premium journaling enables the Journaling agent to perform more granular journaling by using journal rules. Instead of journaling all mailboxes residing on a mailbox database, you can configure journal
rules to match your organization's needs by journaling individual recipients or members of distribution groups.
You must have an Exchange Enterprise client access license (CAL) to use premium journaling.

After upgrading to Yosemite, I don't receive email from Gmail users

Using a MacBook Pro, 2.8 GHz Intel Core 2 Duo, 8 GB RAM, 1 TB SSD internal hard drive. OSX v10.10.2
My primary email address is an .mac/.me/.icloud email address.
Recently upgraded to Yosemite. After doing so, I am having trouble receiving emails from Gmail users (I am not having trouble sending emails from my Gmail account, as many people have).
I asked 8 of my friends with Gmail email addresses to email me a test. I received 4 of these emails immediately after they were sent, the other 4 email took anywhere from 4 to 48 hours for me to receive.
Anyone else have this problem, and if so, any solutions? Any help is greatly appreciated.

There have been various posts about delayed Gmail e-mail delivery to iCloud e-mail addresses, but so far, no solutions. Gmail uses a nonstandard form of IMAP e-mails, which may be causing the problem.

I cant receive imessage vis my mobile number ...i can thru my email....i did everything possible .

i cant receive imessage vis my mobile number ...i can thru my email....i did everything possible .

I apologize. I misread your statement.
The information that I provided about adding the phone number back to the iPad is valid and should work. Now as for the activation of messages, take a look at these support articles for starters. Hopefully, something in one of these will help.
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages - Support - Apple

Receiver SOAP adapter - User authentication question

XI experts,
Here is the scenario - IDOC > XI > SOAP - Ansynchronous call..
I need your all help to understand the user authentication on the "Receiver SOAP Adapter"... We are using "HTTP" transport protocol.
I believe, the userid which we entered in the communication channel needs to have proper security on the web server. The Web server URL starts with "http://lsme
01.xyz.com/...." .
Question : Is this usrid and password will be encrypted when XI calls this web service?
If an answer is "NO" then is there anyway we can encrypt it?
Thanks in advance!
Points will be given..
MP

XI experts,
I need an answer to the following question....
The Web server URL starts with "http://lsme01.xyz.com/...." .
Question : Is this usrid and password will be encrypted when XI calls this web service?
If an answer is "NO" then is there anyway we can encrypt it?
Thanks in advance!
Points will be given..
MP

Configure User Authentication on SOAP Receiver Adapter

Hi,
I am calling a WebService that is available over the internet. We are on PI 7.1 and I am using a Soap Receiver Adapter. The configuration was downloaded from SAP in a partner package. The development in the package was done on XI3.
I need to call the WS with user authentication. I've selected the "Configure User Authentication" radio button and entered the username and password. The message fail with "HTTP 401 Unauthorized" and it is because the user details are not being send from the adapter. If I copy the XML payload to a XML tool, like Stylus Studio, I can call the webservice successfully. I've read through numerous blogs and messages on this Forum, including adding the adapter module (MessageTransformBean) and changing the Conversion Parameters without any luck.
Any suggestions please?
Thanks

I am calling a WebService that is available over the internet.
I copy the XML payload to a XML tool, like Stylus Studio, I can call the webservice successfully.
normally the webservices that we use (from internet) are freely available...meaning they dont require any username/ password.
if no credentials are required then do not select Configure User Authentication...uncheck it....if user-details are provided by the Webservice, then use these details (not your XI/ PI user details) in the channel.
Are you using any user-name/ password while testing from SOAP tools?
Regards,
Abhishek.

User role for user authentication in a SOAP receiver channel

Hi,
What is the role required for a user in a SOAP receiver channel. This user is specified in the User Authentication while configuring the channel.

Hi,
User Authentication is not mandatory but If your Web service requires logon data, select the Configure User Authentication checkbox and fill in the corresponding fields.
If the Web service is outside your system landscape and you need to address a proxy
server, select the Configure Proxy checkbox.
The sender SOAP adapter does not require a SOAP action, but you always have
to apply logon data when using the SOAP adapter. In the central adapter engine
you can use a service user such as xiappluser; in a non-central adapter
engine or a PCK you must use one of the user names assigned to security role
xi_adapter_soap_message for component XISOAPAdapter.
Regards,
Divya

CUP-Password Self Service-Email not received by user

Hi,
I confidured SMTP server with Mail server information.
I raised a request for Password Self-service for a User.
Request executed successfuly with a message " Password was reset and send to email id of user"
Password in backend system has reset successfully,
but No Email has received by user regarding reset PW.
What si the problem, why the user not received email? even in CUP it shows that email sent successfully.

Hi,
Yes i scheduled email dispatcher.
Now Email is received by the user.
User received a link for password, when user click on that a blank page with header Password is displayed.
no other information is appearing.
Thanks
Ram.

Is it possible to do machine and user authentication in same Authorization profile?

Hi,
I want to know is it possible to do machine authenticaiton and user authentication happen at the same time? Some thing like this...
Condition
IF ( wired_802.1x and AD:externalgroup EQUAL dommain computer AND AD:exteranalgroup EQUAL Some_domain_user_group )
Permissions
then Vlan x
Basically i am trying to check a machine is part of domain and user is valid only then he should be able to have full access.
Any help will be of great value.

Hi,
IF ( wired_802.1x and AD:externalgroup EQUAL dommain computer AND AD:exteranalgroup EQUAL Some_domain_user_group )
- Not possible
As user and machine authentication occur at different contexts.
ACS cannot verify the both at the same time.
Using MAR, you can, though club the both together and achieve:
"machine is part of domain and user is valid only then he should be able to have full access"
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wp1235978
Tips for configuring MAR:
1) Set the client to perform user or computer authentication.
2) Create two rules in authorization, one for user and and one for machine (identity them by using group membership on AD).
3) Enable MAR under the AD configuration page on ACS and set the aging time.
4) In the user rule, customize and use the condition "Was machine authenticated" and set it to true.
Rate if useful

User Authentication possible???

Greetings all.
I'm working on a contract where the client is taking a first step at SOA, mainly for
automating now manual processes. Part of the requirement is to implement a user interface to
input/view data. The user interface is to be a web-app and any new business logic is to be
done using JEE/Java web services. CAC's (Common Access Cards) (PKI certificates) are to be
used for user authentication along with SSL.
The problem is that while the client has stated that the user
interface is to be made available as a thin-client (web browser), they have also stated that
the server is NOT to be certifcate enabled, only the application.
Is this even possible?
This client is extremely fustrating as they have tasked many of there own people with JEE
design and project management, yet not a single one of them has ever done any JEE
developement, and very little, if any, other programming, and are very lacking in the
area of project management and meeting organization.
If it is possible, I suspect it would either be a huge amount of work, or require purchasing
a third party product, which again, is something they have said they do not want to get
locked into.
Any thoughts.
-Ed.
To clarify, the question is, is it possible to do 2-way mutual client-cert authentication without having to configure it at the server?
Edited by: Ed_Ward on Nov 12, 2009 3:20 PM

I have seen a couple solutions to the problem that you are facing. I unfortunately have seen situations such as yours more than once.
In the passed I usually simply tell them that they are incorrect in their requirments the server will be certificate enabled as "they know" this is the normal scenario. This strategy is usually "employment limiting". But i like it.
If you are useing SSL then it is likely that personal information or personally identifiable information is being transfered. Many areas have laws about this with a little research you could make the case they must allow certificates on the server for legal compliance. (which may actually be true)
If the server is not to be certificate enabled then perhaps enable certificates on another server.
I have seen authentication done for applications deployed on glassfish in which the user had a user name, password and a dongle (which contained a client cert) that plugged into the USB port. In this case they where using OpenSSO. Plug-in and features and profiles in open sso handled all the login issues
You could try mutual-authentication at a reverse proxy server in front of the application. ie set-up apache with a mutual auth ssl virtual host which passes through to the application with mod_jk. just keep the application server well fire-walled.
Unfortunately most cases like this that I have been in are projects designed to fail. Which in my opinion is also a legal issue. Either way I would like to hear how things turn out.

Message monitoring Status Waiting for email receiver

Hi Guru,
Scenario: SAP ECC will call Error Handling interface class. The communication channel for the Error Handling interface is Email Adapter.
Below is CC setting:
Adapter Type: Mail (Receiver)
Transport Protocol: SMTP
Message Protocol: XIALL
Adapter Engine: Integration Server
URL: smtp://11.11.11.111/
Check - Configure User Authentication
User : user1
Password: password
Mail Attributes:
From: [email protected]
To : [email protected]
Subject : test
Content Encoding: base64
I encountered one problem where my email receiver status in message monitoring is always 'Waiting'. I do not know what went wrong in the setting? Does anyone know how to solve my problem ?
Thanks in advance.
Regards

XI tries 3 times before changing the status of the message to System Error. One can Manually resend the error messages by using the RESEND button in RWB. In scenarios where XI was trying to send the message to an end system that was down for maintenance, you would want XI to resubmit the message automatically without human intervention. What would be nice is to able to tune the retries like IS_Retry which is available for Integration engine.
We can achieve this by changing the retry count used by the Adapter Engine, by default its set to 3 times, 5 minutes apart. This count can be changed in Visual Admin->server->services-> SAP XI Adapter: XI.
Here change the number Retries parameter from 3 to 10 and change the retry retryInterval to around 10minutes. For these configuration changes to be picked up, restart SAP XI Adapter: XI.
please visit the blog
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically

Dynamic user in RFC Adapter

I configure a RFC Receiver adapter to communicate with R/3. In my client application (via Webdynpro) I send the message that use this communication, but I need to call the RFC using a dynamic user/password, that is, the user credentials that is logged. Is it possible? How I do it?
thanks.

Hi Elton,
I don't think so, it is possible to have dynamic user ID and password for the RFC adapter. As of now...
Because you need to enter the user id and password while configuring adapter itself.
But if you want , you can call different RFCs based on the Condition etc.
Hope this helps,
Regards,
Moorthy

Email Receiver Dynamic User Authentication, is it possible?

Similar Messages

Maybe you are looking for