Email receiving problems

Hi,
I am having Emails receving problems with my BB 8320 Curve. Somehow I can not receving no emails from no emails accounts, but I can send them with out problem. As I noticed I get on my oldest BB device a email notification after I registered on BB Internet Service, I get an notification for service book. Here on this new one, I do not get anything, simply the mail seams like it is registered, I can sending emails, but I can not recive anything.
I bought this BB from second hand and was bought in T - mobile somewhere.
If somebody is knowing anything, I will appreciate this a lot.
Thank's.
Boštjan (Slovenia)
Solved!
Go to Solution.

Hi and welcome to the forums!
Do you have a data plan from your carrier?
Can you use the internet?
Send a PIN message to your self, if your don't receive it you do not have a
data plan, or the carrier had not correctly provisoned it.
Let us know,
Thanks,
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

Question Re: Auto Email receiving Problem

I have noticed that for a few days now that my iphone will not show any emails received until I go into each email account and select the refresh button the receive it manually. Prior to this my iphone would just auto pick them up from the server and when I powered up and slid the unlock button there would be the number of emails in red above the email button. Now I see nothing there even though I am receiving them, I have the email setting to check for new emails every 15 minutes. I have tried a reset a few times also.
Can anyone provide any other tips to try?
Thanks in advance
Mark T
Chicago

I too have noticed this with my accounts. I persoanlly feel there is a bug that it just stops checking. Normally after I do a manual check, then it starts working good again.
How are you "resetting". Just powering off and on, or doing the both button till it reboots approach. There is a difference.
A reset/reboot is:
Go to Home Screen
Press and Hold Home Button
Keep holding and press and hold Lock Button
Keep holding Both
You will see Slide to Turn Off (Don't let go to slide, just keep holding)
The phone will turn off (in time, but screen will look like it has some white lines)
Keep Holding
When you see the Apple Logo, you can let go.
Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.
You may also wish to read this tread about reboots and odd application behavior.
http://discussions.apple.com/message.jspa?messageID=5851978#5851978

Outlook pop3 email receiving problem

Dear Sir,
I am using Office 365 Home Plus and my Outlook stopped receiving emails a week ago. Before that it was working fine.
Safe mode does not help, new profile does not help. I can Access my pop3 email on webmail but when I try to receive emails through Outlook, it hangs. At the bottom I see a very very slow "emails receiving email 1 of 105" but nothing happens.
I have also gmail working in Outlook and it Works fine. I have checked my email through service provider and there is nothing wrong there.
I will appreciate it very much if you could please help.

Hi,
The issue doesn't exist with the Gmail account, I suspect it may be caused since the POP3 .pst file is corrupted.
Please run Scanpst.exe to repair the data file to try again:
http://support.microsoft.com/kb/272227/en-us
Please also disable the firewall and the anti-virus program to test the result.
Regards,
Melon Chen
TechNet Community Support

Email receiving problem.

Dear all,
We have a problem in receiving email from a mail address.
Some user can receive the email from one email address, but some user cannot receive the same email.
We have added this domain into exception listed of Content filtering in Antispam (Exchange Server). But, the problem still persist.
When we check in Message Tracking Tool from Exchange 2010, we saw some
"FAIL" EventID for that problematic emails and
in SourceConte "Content Filter" is showing. For the same email, send to other user is successfully received.
Please Advice us to solve the problem.
Min

Hi all,
I found some log in the event viewer which are related to the problematic email issue.
First, I found that the sender email address have a space after the domain name. Eg. "[email protected] "
Error message is
Microsoft.Exchange.Data.Common.LocalizedException: Specified proxy address "[email protected] " is invalid: "[email protected] " isn't a valid SMTP address. The domain name can't contain spaces
and it has to have a prefix and a suffix, such as example.com.
5
Second, when the sender send to our customer 'Distribution Group' email address. which is only name not included domain name.
Eg. instand of '[email protected]' the email come with 'group'
Error Message:
Microsoft.Exchange.Data.Common.LocalizedException: Specified proxy address "group" is invalid: "group" isn't a valid SMTP address. The domain name can't contain spaces and it has to have a prefix and a
suffix, such as example.com.
Please advise how to solve the issue.
Thanks
Min

ICloud Outlook new email receiver problem

Hello everbody,
I am using my iPhone 4S with iCloud and MS Outlook 2010 synchronzing (contacts and calendar).
The problem that I have is that when I write an email with my iPhone device to an new unknown contact that is not in my contact list on the phone after sending this mail my Outlook does not know the new mail adress.
That is very silly, because when I would like to send an email to the same recevier from my outlook pc on the next day for example I must search for the email adress in my iPhone.
Is there a possibilty to create automaticly new contacts entries in the contact list on the iphone if the receiver ist unknown ?
Or is there an other trick or app for this problem.
Thank you.
Matthias Wille

Hi,
The issue doesn't exist with the Gmail account, I suspect it may be caused since the POP3 .pst file is corrupted.
Please run Scanpst.exe to repair the data file to try again:
http://support.microsoft.com/kb/272227/en-us
Please also disable the firewall and the anti-virus program to test the result.
Regards,
Melon Chen
TechNet Community Support

TS3899 Email receiving problem

Question. My Ipad will not display email message content nor attachments, only subject and sender. Preview column does show detail of lines selected. I can access message content by selecting "reply" option but cannot view attachments. Any suggestions to remedy?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!

HT4864 Thank you! This may sound lame but are these instructions for the blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there.

Thank you! This may sound lame but are these instructions for my blackberry? I'm receiving iCloud emails without problems on my MacBook Pro and I'd rather not mess w/ settings there. Thanks again!

You don't need to start a new thread to continue a conversation, you can just tack onto the original one. The settings I referred you to are for the Blackberry, since that's the device which is not receiving mail: anything which is working can be left alone.

HT5361 Today, I experienced a problem with my mail. the time and date on each email received and sent is 18-06 and the date is 22nd July irrespective of the actual time

Today, I experienced a problem with my mail. the time and date on each email received and sent is 18.06 and date as 22nd July. Thank you John

Incorrect date or time displayed in various applications

Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0. The notification should read the date and time you updated email receiving. Does anyone elsehave this problem?

Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0. Two days later it is still saying Mar 30. The notification should read the date and time you updated email receiving. Does anyone else have this problem? Is there a solution to this?

We want to make sure your phone is in working order Mb_in_NC. I know it can be difficult when you see different times. What is your make/model of your device? When did it start? Do you have a different time on any other applications?
AmberF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Message monitoring Status Waiting for email receiver

Hi Guru,
Scenario: SAP ECC will call Error Handling interface class. The communication channel for the Error Handling interface is Email Adapter.
Below is CC setting:
Adapter Type: Mail (Receiver)
Transport Protocol: SMTP
Message Protocol: XIALL
Adapter Engine: Integration Server
URL: smtp://11.11.11.111/
Check - Configure User Authentication
User : user1
Password: password
Mail Attributes:
From: [email protected]
To : [email protected]
Subject : test
Content Encoding: base64
I encountered one problem where my email receiver status in message monitoring is always 'Waiting'. I do not know what went wrong in the setting? Does anyone know how to solve my problem ?
Thanks in advance.
Regards

XI tries 3 times before changing the status of the message to System Error. One can Manually resend the error messages by using the RESEND button in RWB. In scenarios where XI was trying to send the message to an end system that was down for maintenance, you would want XI to resubmit the message automatically without human intervention. What would be nice is to able to tune the retries like IS_Retry which is available for Integration engine.
We can achieve this by changing the retry count used by the Adapter Engine, by default its set to 3 times, 5 minutes apart. This count can be changed in Visual Admin->server->services-> SAP XI Adapter: XI.
Here change the number Retries parameter from 3 to 10 and change the retry retryInterval to around 10minutes. For these configuration changes to be picked up, restart SAP XI Adapter: XI.
please visit the blog
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically

Email Receiver: how to get the names of stored attachments?

Hi,
I hate to spam this forum. But I'm in desperate need of the names of attachments, the email receiver QPAC receives.
If I select a list variable for the email receiver to store all attachments received into, all filenames appear to be lost. Also the MIME-types appear to be lost. Which is not big a problem, since I may use javax.activation in order to identify the MIME-type of any fileinputstream. But sometimes, I am unable to correctly identify the MIME-type. Then I need to fall back on the file's original name.
So the simple question is: how do I get the 'filename' attribute of org.idp.Document objects instantiated by email receiver QPAC?
Did anyone ever do that?
Regards,
Steve

Hi Diana,
1) I used the XPath expression indicated in the screenshot below. It resulted in the process variable
filename being
NULL.
2) I using the following Java-Code in a scripting QPAC:
import java.util.ArrayList;
import java.util.Iterator;
import java.util.Set;
ArrayList list = patExecContext.getProcessDataListValue("/process_data/attachments");
System.out.println("[TEST] num attachments: "+ list.size());
for (Iterator it = list.iterator(); it.hasNext(); ){
com.adobe.idp.Document doc = (com.adobe.idp.Document)it.next();
System.out.println("[TEST] attachment #1, filename: '"+ doc.getFile().getName() +"'");
       System.out.println("[TEST] attachment #1, filename-attribute: '"+ doc.getAttribute("wsfilename") +"'");
        System.out.println("[TEST] attachment #1, file size: '"+ doc.length() +"'");
       System.out.println("[TEST] attachment #1, content-type: "+ doc.getContentType());
Set attributeList = doc.listAttributes();
System.out.println("[TEST] num attributes: "+ attributeList.size());
for (Iterator attributeIter = attributeList.iterator(); attributeIter.hasNext();){
String attribute = (String)attributeIter.next();
System.out.println("[TEST] attribute found: "+ attribute);
Its output in the logfile was the following:
[STDOUT] [TEST] num attachments: 1
[STDOUT] [TEST] attachment #1, filename: '646834941068179579'
[STDOUT] [TEST] attachment #1, filename-attribute: 'null'
[STDOUT] [TEST] attachment #1, file size: '14624'
[STDOUT] [TEST] attachment #1, content-type: null
[STDOUT] [TEST] num attributes: 0
Is there something I did wrong?
Or is it even possible that the Email Receiver does not care about attributes of attachments?
Regards,
Steve

Email received on BT email display blank content

Hi,
The email received fron certain domain on BT internet mail display blank content. Has anyone come across the problem? Let me know how to solve.

I am getting the same thing - going to post about it shortly as I don't know the solution either.

Confusion in Email Receiver QPAC Configuration.

Hi,
I am facing problems with email receiver QPAC. We are using exchange server for Email reception(POP3/Imap).Now the problems are
1.I have given the user name in the same format as specified in one of the forum discussions i.e.
(nt-domain\domain-username\email-username).
It shows the below error When configured for IMAP:
javax.mail.MessagingException: A2 NO There is no replica for that mailbox on this server.;
nested exception is:
com.sun.mail.iap.CommandFailedException: A2 NO There is no replica for that mailbox on this server.
at com.sun.mail.imap.IMAPFolder.exists(IMAPFolder.java:392)
at com.sun.mail.imap.IMAPFolder.checkExists(IMAPFolder.java:261)
at com.sun.mail.imap.IMAPFolder.open(IMAPFolder.java:782)
2.when i configured for pop3 the error is
javax.mail.AuthenticationFailedException: The requested mailbox is not available on this server.
at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:104)
at javax.mail.Service.connect(Service.java:233)
at javax.mail.Service.connect(Service.java:134)
at com.adobe.workflow.qpac.emailreceiver.MailReader.retrieveMessages(MailReader.java:67)
3. when i use pop3 and default (nt-domain\domain-username) the error is
javax.mail.AuthenticationFailedException: Logon failure: unknown user name or bad password.
at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:104)
at javax.mail.Service.connect(Service.java:233)
at javax.mail.Service.connect(Service.java:134)
at com.adobe.workflow.qpac.emailreceiver.MailReader.retrieveMessages(MailReader.java:67)
Please help me on this as we have our accounts existing on the exchange server for pop3.

Hi Raghavan
To me it looks like in your first example, you are correctly connecting to the server, but the server is configured to use referrals.
Please see this Microsoft article:
http://support.microsoft.com/kb/217388
For POP3, I believe that you don't need the domain name - just the users login (or full email address), plus password.
Good luck...
Howard
http://www.avoka.com

Email receiver qpac-SAX Parsing Error

Hi,
Iam working on a project which needs to receive email from an
external person and the workflow will continue from that point.
>>I have put a email receiver qpac to accomplish the
above task. I use the sender's(from) email address as a
filter for incoming mails and the starting 4 letters of the form
name to fetch the XDP attachment. The process works just fine
when tested by sending a mail from Outlook express. But, in
the case of Lotus Notes, the click of email submit button in
the form opens up a new mail with the XDP Data file as
attachment and names it weirdly with some numbers unlike
outlook express client where in the attachment gets named as
the form name "_data.xdp".
Thus, my email receiver does not pick
this email and the process gets stalled giving some SAX
parser error. Is there any way to customise form/ lotus notes
clients to make it work?
Regards,
Raghava Kumar VSS

Hi Raghava
Just drop the 4 starting letters, and look for the first attachment.
There should only ever be 1 attachment, so you shouldn't have a problem.
Howard
http://www.avoka.com

Change subject of Email received

We are now using QuickMail of Outspring and do not want to change to Mail, mainly due to the following problem of Mail:
Many of the Emails we receive do not reflect the keywords we use internally in our company, such as ordernumber, enquiry number, etc.. In Quick Mail we can easily add that number to the Emails received and file accordingly. Consequently we can easily find all correspondence on the relevant internal keyword/reference number by just typing that reference in the search machine of Quick Mail.
Any Mac Mac OS X (10.4.3)
Any Mac Mac OS X (10.4.3)

It's just us users here
BTW, what is your question?
All Automator actions are application specific, so if you are looking for something to work QuickMail, you need to see if the developer has released any actions for it or contact them directly and ask them to.

Email receiving problems

Similar Messages

Maybe you are looking for