Email replies are coming in to a different address than I sent them. Running Mavericks. Any Advice?

I have had 3 different accounts set up in Mail for years and have never had a problem. Yesterday, all email replies were coming in to my gmail account instead of the account I used to send the email. Later, the reply will show up in the correct mailbox. Has anyone else run into this with Mavericks? I've seen a lot of discussions about email not syncing properly but I can't seem to find anything on this problem. Please help!

You have your SMTP servers mixed, check each account for errors.

Similar Messages

  • I'm trying to make "Stop motion videos"  in Final Cut EXPRESS by using 100's of still photos and setting them to music.  They are coming out blurry if viewed larger than 4x6 in size

    I'm trying to make "Stop motion videos"  in Final Cut EXPRESS by using 100's of still photos and setting them to music.  They are coming out blurry if viewed larger than 4x6 in size.
    I don't understand why this is happening. 

    Quick follow up, since I was on my phone earlier and am back to a real keyboard.
    To access Easy Setup, hit Control Q.
    If you click on the blue discosure triangles, a dropdown menu with about a dozen different presets will be displayed. Select the one you want, (Here, I've selected 720P.)
    Whatever you select for a preset will not be applied until you make a new sequence. (I don't like to have sequences with different properties in the same project so I prefer to make a new project if I change the Easy Setup.)
    Because photo aspect ratios are different than video, I typically put a solid generator of some compatible color on the first track (v1) and put my photos on the track above (v2). Looks better, IMO, than black bars. There are other creative ways to display them. And of course, you could scale them up to fill the frame…but then you probably would have to re-position them.
    Good luck.
    Russ

  • HT5312 I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks

    I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks

    If you don't have a rescue email address then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • I am in Korea trying to download Photoshop CC. I am an English speaking and read person, the pages to download are coming up in Korean. I can't read them. How do I change the lanaguge?

    I am in Korea trying to download Photoshop CC. I am an English speaking and read person, the pages to download are coming up in Korean. I can't read them. How do I change the lanaguge

    Take a look at the bottom left hand corner. There should be an option to change location/language. I'm in Norway, and switch between Norwegian and US versions of the site this way.
    For anything involving sign-up and payment, however, you may be redirected, I don't know.

  • HT4623 Just got an ipad air and the apps that are meant to be free ie pages iMovie are coming up with a price how to I get them free

    Just got an ipad air and the apps that are meant to be free ie pages iMovie are coming up with a price how to I get them free

    EvaCarton wrote:
    I have this problem too on my ipad 2.
    It's best to create a new post rather than tag onto an older post.
    How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
    http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
    About Free Apple Apps for iOS 7 compatible devices
    http://support.apple.com/kb/HT5913
     Cheers, Tom

  • TS1702 Hi, I downloaded some Apps and they all appear on my iphone screen saying waiting but will not fully download.  On my account they are showing as downloaded so won't let me download them again.  Any suggestions?

    Hi, I downloaded some Apps and they all appear on my iphone screen saying waiting but will not fully download.  On my account they are showing as downloaded so won't let me download them again.  Any suggestions?

    Hello Funkylildiva,
    Thank you for contacting Apple Support Communities.
    The following article addresses downloading past purchases.
    Download past purchases
    http://support.apple.com/kb/HT2519
    If, after going through this article, you are still having problems, there are links to report a problem or contact iTunes Store suppport at the bottom.
    Regards,
    Jeff D.

  • Email replies are duplicating and triplicating

    Why are my email replies duplicating when I send them out?

    Thanks. Only the double deleted. This is after they send. I'll have to ask recipients if they are are getting one or two these days..Thanks for your help.

  • Email's sent to one email address are currently redirected through a different address and then failing

    I am trying to send an email to one of my previous colleagues. His work email address has now been deleted so I am sending to his personal address. However, at some point in the past the two email addresses have been linked so now whenever I send to his ntlworld.com (personal) address, is it redirected to his nottinghamarimathea.org.uk (work) address. As this address no longer exists, delivery fails and he receives a failure notice to his ntlworld.com address. This only happens when sending via Thunderbird. If I send emails via webmail.nottinghamarimathea.org.uk there is no problems at all. Any advice would be welcome!
    Thanks

    ''RPrideaux [[#question-1040328|said]]''
    <blockquote>
    I am trying to send an email to one of my previous colleagues. His work email address has now been deleted so I am sending to his personal address. However, at some point in the past the two email addresses have been linked so now whenever I send to his ntlworld.com (personal) address, is it redirected to his nottinghamarimathea.org.uk (work) address. As this address no longer exists, delivery fails and he receives a failure notice to his ntlworld.com address. This only happens when sending via Thunderbird. If I send emails via webmail.nottinghamarimathea.org.uk there is no problems at all. Any advice would be welcome!
    Thanks
    </blockquote>

  • Sold to party and Ship to party are the same but has different address

    Hi,
    I have problem here wherein Sales order has the same sold to party and ship to party but they have different address. When the customer master data is changed the sold to party in the sales order is also updated but the ship to party is not updated.
    I've checked the table VBPA and I noticed that the value of ship to party VBPA-ADRDA is 'E' (manually enetered).
    Is this the reason why the address of ship to party in sales order is not updated whenever the customer master is change?
    Another question, how does ship to party entered in sales order manually?
    Thanks in advance.

    Hi,
    Please correct me if I have understood the scenario incorrectly which I try to explain below:
    Sales order is created where SP and SH both have same address initially and while creating the SO, address of the SH was changed manually by Header>partners>SH
    Now master data for that customer is changed for address. As per the standard functionality of SAP, all sales order created for that customer will have new address for SP only.
    If address of SH needs to be changed in SO, it has to be done manually by the same way as explained in the above mails.
    As far as manually entering the SH in SO is concerned, system will automatcally selects the SH if only one record is available for SH. If you have specified more than one SH, system will give you an option to select one by displaying a pop up.
    Please let me know if you find this explanation suitable.
    Ravi

  • I am sending an email from one account on iphone 4s but the replies are coming into another account on my phone

    I have had an iphone 4s for about a year and have 4 email accounts that come in on it: verizon, gmail, my work, and icloud.  Periodically, I send an email from one account, it shows the message as sent from that account in my sent mail, but the recipient receives it from the gmail account and therefore replies to the gmail.  Has anyone had this happen?  It is almost as if my messages are bouncing into gmail when I send them, although on my phone it shows as having been sent from another account.  I have not had this happen on my computer where I have all of these emails coming in as well.  I thought perhaps it was me not being careful about which account I was sending from when using my phone, but the mail I sent this morning I was very careful to make sure was from verizon, the sent mail on my phone shows it was sent from verizon, and the reply came in on gmail.  Gmail isn't even the default email address- verizon is! My iphone is using version 6.1.3. Does anyone have any ideas? This is a major problem for me so I appreciate any ideas!  Thank you!!!

    I am not sure whether this is related, but I had a problem with Gmail where each time I sent and email via my iPhone it would bounce back in my Gmail account as unread. You migh want to check this Google article explaining why this happens and how to avoid it:
    https://support.google.com/mail/answer/1710338?ctx=gmail&hl=en-GB&authuser=0

  • Hotmail email replies are received in gmail??

    I have both hotmail and gmail on my iphone. I have hotmail set as the default, however, when I send an email from hotmail and someone replies to it, I get the reply in gmail. Does anyone know how to change that so that replies come in hotmail? Thanks so much!

    You have your SMTP servers mixed, check each account for errors.

  • Email each page of a report to different address

    I need to run a hyperion report in PDF and send the output to 100 different emails, now the catch is that each page of the report will have a different store and I need to email a particular page of the report to the appropriate store email. I can just send the whole 100 page report to 100 emails addresses which is not what we want or create 100 reports, one for each store which will retrieve for only one store but then updating 100 reports will be tedious. I think this functionality is not there in HR/Financial Reproting and I've looked at all the options but didn't find anything appropriate for this.
    Any thoughts? Thanks for any help.
    J Bling

    Thanks for reply, earlier what I did is set Store as a Page dimension and that gives me 100 pages with a different store on each page. Now with your suggestion to set Store as user POV and sending each bursting report to different email. I'm not sure how to that automatically? Are you suggesting we manually put in different email for each bursting report? Is there a way to automate this process, I've tried all options in the Batch and Scheduler. BTW we are using reprots v 7.2.
    Thanks!

  • Hubby and I both have our own iPads, laptops, and apple/icloud id's.  We both sync everything to iCloud. Just realized that several of my email folders are appearing in his Notes, and we can't delete them.  Help!

    Hubby and I both have our iPads, laptops, and apple/iCloud id's.  We both sync everything to iCloud.  My iPad is the newest device - got it about a month ago. 
    I have created many inbox folders on my laptop in my email.  We just noticed that many of my inbox folders are showing up on his iPad in Notes.  They look like "major headings" or "categories" for lack of a better term.  There are no notes or anything under any of these categories.  We've tried to delete these "categories" from his Notes, but can't do it.  What's happening, and how can we fix this?

    If you are using a PC, log on to iCloud using Safari (rather than Explorer) to reset the photostream. Then turn iPhone/iPad photostream off and back on. I was getting the same server error as you and this advice from another blog worked for my iPhone and iPad.  But I still can't get photostream deleted from my apple tv. There does not seem to be a photostream on/off control In Apple tv 4.4 software.  I tried switching the screen saver to one of the ones that comes preloaded on the device, then back to photostream but all the old photos are still there.  If anyone can help with this, I would appreciate it.

  • None of the applications are coming up on my Ipad after I have downloaded them on my MAC. How do I transfer them as my Ipad does not have any icons showing on it.

    I purchased a new Ipad and I can't see any of the apps on the Ipad. The Itunes shows that they are there, but I can't see anything on the Ipad. It seems dead after it has been plugged in all night.
    I get a message that is stuck "Restoring IPad apps.

    Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.

  • BUG: OJC creates different classes than JAVAC making them incompatible

    Using the new JDeveloper 10g production release, I saw this behaviour when I used a class compiled in JDev (with OJC) passed over RMI to a server running classes compiled with in Ant (with JAVAC).
    I took the problematic class and stripped away parts of it until I have isolated the cause - seems related to class variable members initialization.
    I will provide several exapmles, where I used several modifications, giving the output of JAVAP for the same class, once compiled by JAVAC and once by OJC, highlighting the diff.
    Example #1:
    public class Test { static final int CONSTANT = 0; }JAVAC:
    Compiled from "Test.java"
    public class Test extends java.lang.Object{
        static final int CONSTANT;
        public Test();
    }OJC:
    Compiled from "Test.java"
    public class Test extends java.lang.Object{
        static final int CONSTANT;
        static {};
        public Test();
    Example #2:
    public class Test { final int CONSTANT = 0; }JAVAC:
    Compiled from "Test.java"
    public class Test extends java.lang.Object{
        final int CONSTANT;
        public Test();
    }OJC:
    Compiled from "Test.java"
    public class Test extends java.lang.Object{
        final int CONSTANT;
        void $init$();
        public Test();
    Example #3:
    public class Test { static int CONSTANT = 0; }JAVAC:
    Compiled from "Test.java"
    public class Test extends java.lang.Object{
        static int CONSTANT;
        public Test();
        static {};
    }OJC:
    Compiled from "Test.java"
    public class Test extends java.lang.Object{
        static int CONSTANT;
        static {};
        public Test();
    Example #4:
    public class Test { int CONSTANT = 0; }JAVAC:
    Compiled from "Test.java"
    public class Test extends java.lang.Object{
        int CONSTANT;
        public Test();
    }OJC:
    Compiled from "Test.java"
    public class Test extends java.lang.Object{
        int CONSTANT;
        void $init$();
        public Test();
    }I also have two examples where both compilers produce the same output for JAVAP:
    public class Test { static int CONSTANT; }
    public class Test { int CONSTANT; }I hope this is enough information to solve this.
    Classes compiled with OJC should not be incompatible with classes compiled with JAVAC with the same settings!
    Regards,
    Yaniv Kunda

    I'm sorry but I'm too busy with an urgent project to set up a RMI client/server testbed for this to test this problem, but all the example I gave are ones I've performed myself, and which all work - a simple class containing a constant (in several variations of its modifiers) compiled once with JAVAC and once with OJC produced different classes.
    I simply used javap to find out the difference between the classes, and highlighted the differences in bold - that would be a good place to start looking for the bug.
    Besides I'm not sure how to create a test that loads two versions of the same class not using RMI (perhaps via a special ClassLoader?)
    Regards,
    Yaniv Kunda

Maybe you are looking for

  • VF05 report(Billing doc list) exporting to excel sheet

    Hi I would like to export the VF05 report( Billing doc list) into the predefined layout of Excel sheet. How can we do this. Can anyone of you explain me this. It is the business requirement and they do not want to go for SAP scripts or zprogram. IT I

  • How Come I Can't Print as a pdf?

    Hi, I'm a relative newbie. I want to create a pdf from a web page but when I choose Print as a pdf from the File menu, it only gives me the option of saving the PDF as a PostScript. I want to save it as a PDF. I don't usually have problems doing this

  • BADI not accepting filter type

    Hi All, I am trying to implement a YBADI in PLM Module using BADI definition  DPR_CONTROLPLAN . The filter type are only allowed if the BADI is created as a local object if it is created as a Transportable object (package) then it does not allows the

  • Query on Poartal Administration

    Hi, I am very new to Weblogic Portal so I have some basic queries, I wonder if anybody can suggest me something about my queries. After going through BEA docs I assume that one can make portal either from Weblogic Workshop or from Weblogic Administra

  • Bypass authority check when creating Ibase from BAPI

    Hi, We have a requirement to create/update an Ibase when saving a Service Order.  We don't want to give users authorization to update the Ibase via PFCG. Is there a way to bypass the standard authority check that is executed when calling CRM_ICSS_CRE