Email saturation bombing

Unfortunalely I, like so many other trusting iTunes users, accepted the latest upgrade; it is now v 10.4.0.80.
I accessed iTunes store last night to compose a "wishlist" of Elton John songs. I could not find the list according to Apple instructions, so I gave up and signed out, after posting this problem on this website.
Today, I have found >100 emails in my box from Apple forums. Most concern app store problems, of no interest to me. Such a major blunder is uncharacteristic of Apple Corp. I wonder if Steve Jobs is having the same problems.
I am reluctant to access any Apple services at this point. Attempting to "downgrade" to a previous version of iTunes seems unlikely.
Where will this end?

Your old address will be available in 6 months. You will have to use your new address.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Email verification for AppleIDs - definitely still something wrong

Hi,
The AppleID that I want to use for iCloud has the primary email account not verified.
Now there is definitely something wrong with verifying my email on this account apart from a general email delivery problem.
I say this because:
1) On appleid.apple.com I can click "Verify Now" till I'm blue in the face. I see a few URLs appear at the bottom and the screen redraws and the address is still "Verify Now"
2) I then added an "Alternate Email address" - I used another form of my email address that comes to the very same gmail account that works for my main address. appleid.apple.com added that address and marked it "Verification sent" or similar. In 3 seconds flat I received an email in my gmail account and clicked to verify. The alternate email is now verified.
In the meanwhile my primary address still is marked "verify now" and I must have clicked that 100 times and no mail.
I checked all my other apple ids and none I can find have the same email address associated with them. I'm not sure how that can happen anyway since if you try to add an email address to an apple id that is already associated with another apple id then it stops you.
So - I believe there is something specific wrong behind the scenes with my apple id and some others.
The status page on icloud says this verification problem is fixed BUT IT DEFINITELY IS NOT.
Steve

Curiouser and curiouser.
Saga so far - my apple id I renamed from the unverifyable [email protected] to [email protected]
That I can't verify since [email protected] doesn't actually come to me I discover.
So I logged back in on appleid with the new [email protected]
I notice that my alternate email of [email protected] was gone.
I then renamed the account to [email protected]
It didn't send me a verification email, but suddenly I was [email protected] and it was verified!
Curiously I ALSO have an alternate email on the account that is _also_ [email protected]
So I'm now twice verified - but not with the the apple id I really want to use.
I then had the idea to try to add my original [email protected] as an alternate. But the system won't let me since it says its verified for another apple id. I'm not sure what ID that is. So I used the "I forgot" on apple ID. and put in [email protected] I duly received a password reset email,
Going into the password reset and putting in a "too short" password produced an error message that revealed the other apple ID that had my email against it. Which turned out to be my company developer account.
So this issue is all about duplicated email addresses associated with apple ids.
There seems to be some big mess in the apple ID database or the developers minds about how apple ids and primary email addresses relate. It seems some apple ids tie the email address and apple id together, others (like developer ids) keep them separated.
Apple IDs must be unique. That make sense.
But there are clearly logic errors in Apple's handling of email addresses. It seems that code expects to find an email only associated with one apple id. But clearly that isn't consistently enforced otherwise how did mine get in twice. And, specifically for the current issue: when the system wants to send a verification email it bombs out if it finds two or more apple ids for the same email.
Steve

Is anybody having problems opening Jpegs attachments on iPhone 4s sent in email?..imap , mac, and exchange accounts are affected. I get a spinning wheel or it bombs out!!..Help

Is any body having problems opening Jpegs sent via email as attachments. iPhone 4
I can't open and get a spinning wheel or it bombs out!..Help!! It affects iMap, exchange and mac accounts!

Solution for me was changing the "Load Remote Images" setting, shutting down and restarting the phone. The old messages with problems reloaded with all attachments accessible.
Background: I began having this problem recently with PDF, jpeg,vcf files and apparently now, all attachments as well as email with html links are coming through with no attachment or as empty email. This was a new problem for me. I have been backing up to the cloud, but not using a cloud email account. I have multiple accounts on the phone, six of them actually and have been set up this way for over a year without problem. Some are imap, some pop, none are through exchange.

ClamAV fails to scan for viruses in emails [CLAWS MAIL]

I've recently switched from Thunderbird to Claws Mail and ran into one small, but annoying, problem.
I want to use ClamAV + the clamav extension for claws mail to scan for viruses, however it does seem to have permission problems.
clamd is running, user and group clamav all have the relevant permissions as far as I can tell, however upon scanning my mail, I always end up with the following error:
Scanning error:
/home/username/.claws-mail/mimetmp/0000000e.mimetmp: lstat() failed: Permission denied. ERROR
Here's my clamd.conf:
## Please read the clamd.conf(5) manual before editing this file.
# Comment or remove the line below.
#Example
# Uncomment this option to enable logging.
# LogFile must be writable for the user running daemon.
# A full path is required.
# Default: disabled
LogFile /var/log/clamav/clamd.log
# By default the log file is locked for writing - the lock protects against
# running clamd multiple times (if want to run another clamd, please
# copy the configuration file, change the LogFile variable, and run
# the daemon with --config-file option).
# This option disables log file locking.
# Default: no
#LogFileUnlock yes
# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
# in bytes just don't use modifiers.
# Default: 1M
#LogFileMaxSize 2M
# Log time with each message.
# Default: no
LogTime yes
# Also log clean files. Useful in debugging but drastically increases the
# log size.
# Default: no
#LogClean yes
# Use system logger (can work together with LogFile).
# Default: no
#LogSyslog yes
# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL
# Enable verbose logging.
# Default: no
#LogVerbose yes
# Log additional information about the infected file, such as its
# size and hash, together with the virus name.
#ExtendedDetectionInfo yes
# This option allows you to save a process identifier of the listening
# daemon (main thread).
# Default: disabled
PidFile /run/clamav/clamd.pid
# Optional path to the global temporary directory.
# Default: system specific (usually /tmp or /var/tmp).
TemporaryDirectory /tmp
# Path to the database directory.
# Default: hardcoded (depends on installation options)
DatabaseDirectory /var/lib/clamav
# Only load the official signatures published by the ClamAV project.
# Default: no
OfficialDatabaseOnly yes
# The daemon can work in local mode, network mode or both.
# Due to security reasons we recommend the local mode.
# Path to a local socket file the daemon will listen on.
# Default: disabled (must be specified by a user)
LocalSocket /var/lib/clamav/clamd.sock
# Sets the group ownership on the unix socket.
# Default: disabled (the primary group of the user running clamd)
LocalSocketGroup clamav
# Sets the permissions on the unix socket to the specified mode.
# Default: disabled (socket is world accessible)
#LocalSocketMode 660
# Remove stale socket after unclean shutdown.
# Default: yes
#FixStaleSocket yes
# TCP port address.
# Default: no
#TCPSocket 3310
# TCP address.
# By default we bind to INADDR_ANY, probably not wise.
# Enable the following to provide some degree of protection
# from the outside world.
# Default: no
#TCPAddr 127.0.0.1
# Maximum length the queue of pending connections may grow to.
# Default: 200
#MaxConnectionQueueLength 30
# Clamd uses FTP-like protocol to receive data from remote clients.
# If you are using clamav-milter to balance load between remote clamd daemons
# on firewall servers you may need to tune the options below.
# Close the connection when the data size limit is exceeded.
# The value should match your MTA's limit for a maximum attachment size.
# Default: 25M
#StreamMaxLength 10M
# Limit port range.
# Default: 1024
#StreamMinPort 30000
# Default: 2048
#StreamMaxPort 32000
# Maximum number of threads running at the same time.
# Default: 10
#MaxThreads 20
# Waiting for data from a client socket will timeout after this time (seconds).
# Default: 120
#ReadTimeout 300
# This option specifies the time (in seconds) after which clamd should
# timeout if a client doesn't provide any initial command after connecting.
# Default: 5
#CommandReadTimeout 5
# This option specifies how long to wait (in miliseconds) if the send buffer is full.
# Keep this value low to prevent clamd hanging
# Default: 500
#SendBufTimeout 200
# Maximum number of queued items (including those being processed by MaxThreads threads)
# It is recommended to have this value at least twice MaxThreads if possible.
# WARNING: you shouldn't increase this too much to avoid running out of file descriptors,
# the following condition should hold:
# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual max is 1024)
# Default: 100
#MaxQueue 200
# Waiting for a new job will timeout after this time (seconds).
# Default: 30
#IdleTimeout 60
# Don't scan files and directories matching regex
# This directive can be used multiple times
# Default: scan all
#ExcludePath ^/proc/
#ExcludePath ^/sys/
# Maximum depth directories are scanned at.
# Default: 15
#MaxDirectoryRecursion 20
# Follow directory symlinks.
# Default: no
#FollowDirectorySymlinks yes
# Follow regular file symlinks.
# Default: no
#FollowFileSymlinks yes
# Scan files and directories on other filesystems.
# Default: yes
#CrossFilesystems yes
# Perform a database check.
# Default: 600 (10 min)
#SelfCheck 600
# Execute a command when virus is found. In the command string %v will
# be replaced with the virus name.
# Default: no
#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"
# Run as another user (clamd must be started by root for this option to work)
# Default: don't drop privileges
User clamav
# Initialize supplementary group access (clamd must be started by root).
# Default: no
#AllowSupplementaryGroups no
# Stop daemon when libclamav reports out of memory condition.
#ExitOnOOM yes
# Don't fork into background.
# Default: no
#Foreground yes
# Enable debug messages in libclamav.
# Default: no
#Debug yes
# Do not remove temporary files (for debug purposes).
# Default: no
#LeaveTemporaryFiles yes
# Detect Possibly Unwanted Applications.
# Default: no
#DetectPUA yes
# Exclude a specific PUA category. This directive can be used multiple times.
# See http://www.clamav.net/support/pua for the complete list of PUA
# categories.
# Default: Load all categories (if DetectPUA is activated)
#ExcludePUA NetTool
#ExcludePUA PWTool
# Only include a specific PUA category. This directive can be used multiple
# times.
# Default: Load all categories (if DetectPUA is activated)
#IncludePUA Spy
#IncludePUA Scanner
#IncludePUA RAT
# In some cases (eg. complex malware, exploits in graphic files, and others),
# ClamAV uses special algorithms to provide accurate detection. This option
# controls the algorithmic detection.
# Default: yes
#AlgorithmicDetection yes
## Executable files
# PE stands for Portable Executable - it's an executable file format used
# in all 32 and 64-bit versions of Windows operating systems. This option allows
# ClamAV to perform a deeper analysis of executable files and it's also
# required for decompression of popular executable packers such as UPX, FSG,
# and Petite. If you turn off this option, the original files will still be
# scanned, but without additional processing.
# Default: yes
#ScanPE yes
# Executable and Linking Format is a standard format for UN*X executables.
# This option allows you to control the scanning of ELF files.
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
# Default: yes
#ScanELF yes
# With this option clamav will try to detect broken executables (both PE and
# ELF) and mark them as Broken.Executable.
# Default: no
#DetectBrokenExecutables yes
## Documents
# This option enables scanning of OLE2 files, such as Microsoft Office
# documents and .msi files.
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
# Default: yes
#ScanOLE2 yes
# With this option enabled OLE2 files with VBA macros, which were not
# detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
# Default: no
#OLE2BlockMacros no
# This option enables scanning within PDF files.
# If you turn off this option, the original files will still be scanned, but
# without decoding and additional processing.
# Default: yes
#ScanPDF yes
## Mail files
# Enable internal e-mail scanner.
# If you turn off this option, the original files will still be scanned, but
# without parsing individual messages/attachments.
# Default: yes
#ScanMail yes
# Scan RFC1341 messages split over many emails.
# You will need to periodically clean up $TemporaryDirectory/clamav-partial directory.
# WARNING: This option may open your system to a DoS attack.
# Never use it on loaded servers.
# Default: no
#ScanPartialMessages yes
# With this option enabled ClamAV will try to detect phishing attempts by using
# signatures.
# Default: yes
#PhishingSignatures yes
# Scan URLs found in mails for phishing attempts using heuristics.
# Default: yes
#PhishingScanURLs yes
# Always block SSL mismatches in URLs, even if the URL isn't in the database.
# This can lead to false positives.
# Default: no
#PhishingAlwaysBlockSSLMismatch no
# Always block cloaked URLs, even if URL isn't in database.
# This can lead to false positives.
# Default: no
#PhishingAlwaysBlockCloak no
# Allow heuristic match to take precedence.
# When enabled, if a heuristic scan (such as phishingScan) detects
# a possible virus/phish it will stop scan immediately. Recommended, saves CPU
# scan-time.
# When disabled, virus/phish detected by heuristic scans will be reported only at
# the end of a scan. If an archive contains both a heuristically detected
# virus/phish, and a real malware, the real malware will be reported
# Keep this disabled if you intend to handle "*.Heuristics.*" viruses
# differently from "real" malware.
# If a non-heuristically-detected virus (signature-based) is found first,
# the scan is interrupted immediately, regardless of this config option.
# Default: no
#HeuristicScanPrecedence yes
## Data Loss Prevention (DLP)
# Enable the DLP module
# Default: No
#StructuredDataDetection yes
# This option sets the lowest number of Credit Card numbers found in a file
# to generate a detect.
# Default: 3
#StructuredMinCreditCardCount 5
# This option sets the lowest number of Social Security Numbers found
# in a file to generate a detect.
# Default: 3
#StructuredMinSSNCount 5
# With this option enabled the DLP module will search for valid
# SSNs formatted as xxx-yy-zzzz
# Default: yes
#StructuredSSNFormatNormal yes
# With this option enabled the DLP module will search for valid
# SSNs formatted as xxxyyzzzz
# Default: no
#StructuredSSNFormatStripped yes
## HTML
# Perform HTML normalisation and decryption of MS Script Encoder code.
# Default: yes
# If you turn off this option, the original files will still be scanned, but
# without additional processing.
#ScanHTML yes
## Archives
# ClamAV can scan within archives and compressed files.
# If you turn off this option, the original files will still be scanned, but
# without unpacking and additional processing.
# Default: yes
#ScanArchive yes
# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
# Default: no
#ArchiveBlockEncrypted no
## Limits
# The options below protect your system against Denial of Service attacks
# using archive bombs.
# This option sets the maximum amount of data to be scanned for each input file.
# Archives and other containers are recursively extracted and scanned up to this
# value.
# Value of 0 disables the limit
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 100M
#MaxScanSize 150M
# Files larger than this limit won't be scanned. Affects the input file itself
# as well as files contained inside it (when the input file is an archive, a
# document or some other kind of container).
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 25M
#MaxFileSize 30M
# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
# file, all files within it will also be scanned. This options specifies how
# deeply the process should be continued.
# Note: setting this limit too high may result in severe damage to the system.
# Default: 16
#MaxRecursion 10
# Number of files to be scanned within an archive, a document, or any other
# container file.
# Value of 0 disables the limit.
# Note: disabling this limit or setting it too high may result in severe damage
# to the system.
# Default: 10000
#MaxFiles 15000
## Clamuko settings
# Enable Clamuko. Dazuko must be configured and running. Clamuko supports
# both Dazuko (/dev/dazuko) and DazukoFS (/dev/dazukofs.ctrl). DazukoFS
# is the preferred option. For more information please visit www.dazuko.org
# Default: no
#ClamukoScanOnAccess yes
# The number of scanner threads that will be started (DazukoFS only).
# Having multiple scanner threads allows Clamuko to serve multiple
# processes simultaneously. This is particularly beneficial on SMP machines.
# Default: 3
#ClamukoScannerCount 3
# Don't scan files larger than ClamukoMaxFileSize
# Value of 0 disables the limit.
# Default: 5M
#ClamukoMaxFileSize 10M
# Set access mask for Clamuko (Dazuko only).
# Default: no
#ClamukoScanOnOpen yes
#ClamukoScanOnClose yes
#ClamukoScanOnExec yes
# Set the include paths (all files inside them will be scanned). You can have
# multiple ClamukoIncludePath directives but each directory must be added
# in a seperate line. (Dazuko only)
# Default: disabled
#ClamukoIncludePath /home
#ClamukoIncludePath /students
# Set the exclude paths. All subdirectories are also excluded. (Dazuko only)
# Default: disabled
#ClamukoExcludePath /home/bofh
# With this option you can whitelist specific UIDs. Processes with these UIDs
# will be able to access all files.
# This option can be used multiple times (one per line).
# Default: disabled
#ClamukoExcludeUID 0
# With this option enabled ClamAV will load bytecode from the database.
# It is highly recommended you keep this option on, otherwise you'll miss detections for many new viruses.
# Default: yes
#Bytecode yes
# Set bytecode security level.
# Possible values:
# None - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS
# This value is only available if clamav was built with --enable-debug!
# TrustSigned - trust bytecode loaded from signed .c[lv]d files,
# insert runtime safety checks for bytecode loaded from other sources
# Paranoid - don't trust any bytecode, insert runtime checks for all
# Recommended: TrustSigned, because bytecode in .cvd files already has these checks
# Note that by default only signed bytecode is loaded, currently you can only
# load unsigned bytecode in --enable-debug mode.
# Default: TrustSigned
#BytecodeSecurity TrustSigned
# Set bytecode timeout in miliseconds.
# Default: 5000
# BytecodeTimeout 1000
My freshclam.conf:
## Please read the freshclam.conf(5) manual before editing this file.
# Comment or remove the line below.
#Example
# Path to the database directory.
# WARNING: It must match clamd.conf's directive!
# Default: hardcoded (depends on installation options)
#DatabaseDirectory /var/lib/clamav
# Path to the log file (make sure it has proper permissions)
# Default: disabled
UpdateLogFile /var/log/clamav/freshclam.log
# Maximum size of the log file.
# Value of 0 disables the limit.
# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
# in bytes just don't use modifiers.
# Default: 1M
#LogFileMaxSize 2M
# Log time with each message.
# Default: no
#LogTime yes
# Enable verbose logging.
# Default: no
#LogVerbose yes
# Use system logger (can work together with UpdateLogFile).
# Default: no
#LogSyslog yes
# Specify the type of syslog messages - please refer to 'man syslog'
# for facility names.
# Default: LOG_LOCAL6
#LogFacility LOG_MAIL
# This option allows you to save the process identifier of the daemon
# Default: disabled
#PidFile /var/run/freshclam.pid
# By default when started freshclam drops privileges and switches to the
# "clamav" user. This directive allows you to change the database owner.
# Default: clamav (may depend on installation options)
#DatabaseOwner clamav
# Initialize supplementary group access (freshclam must be started by root).
# Default: no
#AllowSupplementaryGroups yes
# Use DNS to verify virus database version. Freshclam uses DNS TXT records
# to verify database and software versions. With this directive you can change
# the database verification domain.
# WARNING: Do not touch it unless you're configuring freshclam to use your
# own database verification domain.
# Default: current.cvd.clamav.net
#DNSDatabaseInfo current.cvd.clamav.net
# Uncomment the following line and replace XY with your country
# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
# You can use db.XY.ipv6.clamav.net for IPv6 connections.
#DatabaseMirror db.XY.clamav.net
# database.clamav.net is a round-robin record which points to our most
# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is
# not working. DO NOT TOUCH the following line unless you know what you
# are doing.
DatabaseMirror database.clamav.net
# How many attempts to make before giving up.
# Default: 3 (per mirror)
#MaxAttempts 5
# With this option you can control scripted updates. It's highly recommended
# to keep it enabled.
# Default: yes
#ScriptedUpdates yes
# By default freshclam will keep the local databases (.cld) uncompressed to
# make their handling faster. With this option you can enable the compression;
# the change will take effect with the next database update.
# Default: no
#CompressLocalDatabase no
# With this option you can provide custom sources (http:// or file://) for
# database files. This option can be used multiple times.
# Default: no custom URLs
#DatabaseCustomURL http://myserver.com/mysigs.ndb
#DatabaseCustomURL file:///mnt/nfs/local.hdb
# Number of database checks per day.
# Default: 12 (every two hours)
#Checks 24
# Proxy settings
# Default: disabled
#HTTPProxyServer myproxy.com
#HTTPProxyPort 1234
#HTTPProxyUsername myusername
#HTTPProxyPassword mypass
# If your servers are behind a firewall/proxy which applies User-Agent
# filtering you can use this option to force the use of a different
# User-Agent header.
# Default: clamav/version_number
#HTTPUserAgent SomeUserAgentIdString
# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
# multi-homed systems.
# Default: Use OS'es default outgoing IP address.
#LocalIPAddress aaa.bbb.ccc.ddd
# Send the RELOAD command to clamd.
# Default: no
NotifyClamd /etc/clamav/clamd.conf
# Run command after successful database update.
# Default: disabled
#OnUpdateExecute command
# Run command when database update process fails.
# Default: disabled
#OnErrorExecute command
# Run command when freshclam reports outdated version.
# In the command string %v will be replaced by the new version number.
# Default: disabled
#OnOutdatedExecute command
# Don't fork into background.
# Default: no
#Foreground yes
# Enable debug messages in libclamav.
# Default: no
#Debug yes
# Timeout in seconds when connecting to database server.
# Default: 30
#ConnectTimeout 60
# Timeout in seconds when reading from database server.
# Default: 30
#ReceiveTimeout 60
# With this option enabled, freshclam will attempt to load new
# databases into memory to make sure they are properly handled
# by libclamav before replacing the old ones.
# Default: yes
#TestDatabases yes
# When enabled freshclam will submit statistics to the ClamAV Project about
# the latest virus detections in your environment. The ClamAV maintainers
# will then use this data to determine what types of malware are the most
# detected in the field and in what geographic area they are.
# Freshclam will connect to clamd in order to get recent statistics.
# Default: no
#SubmitDetectionStats /path/to/clamd.conf
# Country of origin of malware/detection statistics (for statistical
# purposes only). The statistics collector at ClamAV.net will look up
# your IP address to determine the geographical origin of the malware
# reported by your installation. If this installation is mainly used to
# scan data which comes from a different location, please enable this
# option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
# of the country of origin.
# Default: disabled
#DetectionStatsCountry country-code
# This option enables support for our "Personal Statistics" service.
# When this option is enabled, the information on malware detected by
# your clamd installation is made available to you through our website.
# To get your HostID, log on http://www.stats.clamav.net and add a new
# host to your host list. Once you have the HostID, uncomment this option
# and paste the HostID here. As soon as your freshclam starts submitting
# information to our stats collecting service, you will be able to view
# the statistics of this clamd installation by logging into
# http://www.stats.clamav.net with the same credentials you used to
# generate the HostID. For more information refer to:
# http://www.clamav.net/support/faq/faq-cctts/
# This feature requires SubmitDetectionStats to be enabled.
# Default: disabled
#DetectionStatsHostID unique-id
# This option enables support for Google Safe Browsing. When activated for
# the first time, freshclam will download a new database file (safebrowsing.cvd)
# which will be automatically loaded by clamd and clamscan during the next
# reload, provided that the heuristic phishing detection is turned on. This
# database includes information about websites that may be phishing sites or
# possible sources of malware. When using this option, it's mandatory to run
# freshclam at least every 30 minutes.
# Freshclam uses the ClamAV's mirror infrastructure to distribute the
# database and its updates but all the contents are provided under Google's
# terms of use. See http://code.google.com/support/bin/answer.py?answer=70015
# and http://safebrowsing.clamav.net for more information.
# Default: disabled
#SafeBrowsing yes
# This option enables downloading of bytecode.cvd, which includes additional
# detection mechanisms and improvements to the ClamAV engine.
# Default: enabled
#Bytecode yes
# Download an additional 3rd party signature database distributed through
# the ClamAV mirrors. Here you can find a list of available databases:
# http://www.clamav.net/download/cvd/3rdparty
# This option can be used multiple times.
#ExtraDatabase dbname1
#ExtraDatabase dbname2
Any help is much appreciated.

MatejLach wrote:
clamd is running, user and group clamav all have the relevant permissions as far as I can tell, however upon scanning my mail, I always end up with the following error:
Scanning error:
/home/username/.claws-mail/mimetmp/0000000e.mimetmp: lstat() failed: Permission denied. ERROR
Seems like a permissions error to me... maybe check the actual file it is attempting to scan... I know it is in your home folder, but just to be sure, you might want to check that everything is sane.

In attempting to sync my Outlook Contacts to my iphone 5, Outlook shows in the drop down, but it does not allow click-on, then below is listed only my email information, nothing else, no calendars, contacts. When I click on the email, it adds new acct

In attempting to sync my Outlook Contacts to my new iphone 5,in iTunes, Outlook shows in the drop-down box, but it does not allow click-on. Individual items are not listed to click on. The only listing is my email address and when you sync it, it really does not sync, it adds another email account with the same name, and no contacts sync with it.

also - when I use camera wizard it just tells me the phone is busy or in use and I should retry.
If I use it through windoes explorer - it shows me the camera to computer symbols and a line moving between then but bombs out saying camera is busy.

How to put system info. in error mess. sent by email through process chains

When I get an error message by email from the process chain saying that the process bombed, it does not tell me from which SAP system the problem occured? (Whether Dev or QA or Prod). Is there a way to put the SAP system in the email along with the error from the process chain?
Thanks
Ram

Hi Akshay,
I am in version 3.5. I believe you can do it in 7. We have a standard user id called ALEREMOTE coming from all 3 systems. We would ideally like the message to say ALEREMOTE - (the error message with DEV specified), ALEREMOTE - (the error message with QA specified) and ALEREMOTE - (the error message with PRD specified).
Thanks
Ram

Desaturated colors in email compared to thumbnail enalrgements in iPhoto 6

The image that iPhoto creates when I use it to compose an email is desaturated compared to the image that iPhoto shows when enlarging the thumbnail. This wasn't the case with my earlier version of iPhoto (on my pismo), so it's not the photos. I use apple's Mail application. Any ideas on getting the image to maintain its original color?
Thanks -

Steve:
Check iPhoto's Advanced preferences and see if you've got the checkbox selected to add a color profile to files upon importing. If it is try this following test:
1 - take a test shot with your camera and upload to the desktop.
2 - open Mail and add the file as an attachment and leave the draft open.
3 - import the file from the desktop into iPhoto and start the email process with it.
4 - now compare the two in Mail.
I'm thinking that the profile that iPhoto is embedding may be different from the one used by the camera. You can check the profiles with Preview under the Tools->Get Info window. Generally speaking if one of the profiles is the Adobe RGB it should be much more saturated than the general RGB or sRGB.
Post back with the results.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

IPhoto problem with email, export, editing...

Had my iMac upgraded with a new harddrive and Lion at my authorized retailer & service center. All has been good but did not use iPhoto much after the upgrade, but all seemed to be good.
Recently photographed a family occasion and now I experience the following problems;
1. After successful import I edit the pictures which leads to numerous crashes, seemingly randomly, but most frequently when jumping from editing one picture to the next.
2. Share, Email does not work, only a few of the selected pictures are sent, sometimes with a low resolution thumbnail instead of the desired picture. The selection process works normally, but when the mail has been formatted only a few or none picture are inserted, in any of the templates, including classic. The number of selcted photos and their size are reported normal, they just don't show up in the mail itself
3. Resorting to export to a folder, all of the pictures are exported, however not always with intact changes/edits???
I have previously never had any major problems with iPhoto up until this version, and am seriously considering ditching it after all the wasted time.
Any suggestions how to attack this problem in iPhoto 11 & 10.7 Lion? (I am unable to find any plist etc like in 10.6 and earlier)
Thanks for any hints and/or tips...

Hi Larry,
thanks for your quick reply...
The harddrive and all user data was transferred by the authorized service center. I able to see and use all the old pictures, so I think (and hope) my pictures were correctly transferred.
After reading this:
https://discussions.apple.com/thread/3087683?start=45&tstart=0
and done minor edits to ALL the NEW (of today) pictures I want, it seems to file, export correctly. I did some additional minor adjustments (exposure, saturation, sharpness, etc) and behold, the export worked ok, including edits like crops, straightenings, etc, that were omitted without the "adjustments"...
It feels like some proper bugs to me, and will probably look for another more robust and flexible software to do my edits...
Recommendations?
Using Picasa sometimes, but read somewhere they use a hack to get to the iPhoto pictures & database, not sure I like that... Maybe I should go Aperture...???

My Emailed photo looks bad!

When I email a specific picture, either from within Iphoto, or by copying photo to desktop and attaching it....it looks TERRIBLE in my email. (Overly saturated, skin tone too orange). This is an un-edited picture.
The picture in question, looks perfect in Iphoto, as well as when I open it in Preview after copying it to the desktop.
Any ideas?

I'm sorry that I wasn't clear. I did a favor & shot some baby pics for a friend. I just wanted to make certain that the "actual Iphoto picture (file)" that I took, and that looks good in my Iphoto was what I was sending her. I'd hate to think that she's getting the horrible one that I was seeing. However I realize that her Mail will "see" things differently than mine apparently. At least if she prints my picture "file" it should be ok I'm guessing.
Since the picture looks good in my "Preview" application, I'll assume that it's just Mail that lets it appear distorted. Just frustrating for me to not "see" what I'm sending correctly in Mail.

Change Brightness, Contrast and Saturation of an image

Hi,
I have an 256 grey level image and I'd like to change the brightness,
contrast and saturation.
Does it exist a VI to do this?
If someone has an example, please send to me.
Thanks in advance,
Miguel.

Robert,
¿Where is the example? In ftp://ftp.ni.com or in http://www.ni.com?
Thanks,
Miguel.
Robert Currie escribió en el mensaje de noticias
#35p1dFA$GA.285@cpmsnbbsa03...
> Try the example VI by NI.
>
> It should be located in the following folder:
> Labview/Examples/Vision/Imaq_ex2.llb
>
> Then choose the Brightness/Contrast example.
>
> If you don't/can't find it let me know and I'll send the library.
>
> Robert
>
>
>
> Miguel wrote in message <[email protected]>...
> >Hi,
> >
> >I have an 256 grey level image and I'd like to change the brightness,
> >contrast and saturation.
> >
> >Does it exist a VI to do this?
> >
> >If someone has an example, please send to me.
> >
> >Thanks in advance,
> >
> >Miguel.
> >
>
>

Email attachment auto download

Hi,
i have recently connected my phone with my company email so that i can read it when im on the go. I realised after i open up the email the attachment download automatically which i do not want to download. I have ever downloaded attachment which is more than 50mb when im using my local cellular data without any of my permission to download it. It will cost a bomb to my month end bill which im only entitled for 3gb of data usage per month.
Is there any solutions to disable the auto email attachment download?
Appreciate your input.
Thanks and best regards,
Daren

If Excel works as do other apps, you should be able to tap and hold on the attachment and then select "Open in Excel" in the window that will open. Note that you need to be subscribed to and signed into Office 365 to be able to edit documents in Microsoft's apps.
Regards.

My design is made darker when uploaded to Dropbox or emailed.

I am designing a brochure for print using photoshop. I am working in CMYK working format, using CS6. I have tried saving the image as .jpg, PDF, and .tiff but the problem still persists. The preview in photoshop looks good and when I open it from finder it looks fine. The problem comes when I try to upload the file to dropbox or email it. The image looks very dark and very over-saturated, almost like a burn tool has been on it. I have been using photoshop for somtime but this is one of the first times using CMYK for print. I am not a pro. Please help if you can.

Simple. You are using Adobe RGB as the color space for print and non color managed apps prefer sRGB, a smaller gamut than Adobe RGB. The properly rendered colors are clipped in the smaller sRGB space making it look darker.
You will need to convert a copy the file to the sRGB profile (Edit > Convert to Profile...) or use File > Save for Web and check "convert to sRGB".
Gene

Need help: Flex record webcam problem, how to setting Brightness,Contrast,Saturation and Sharpness

Hello, dear all
Please help me!
Flex record webcam problem, how to setting Brightness,Contrast,Saturation and Sharpness?
nsOutGoing=new NetStream(nc);
nsOutGoing.attachCamera(m_camera);
nsOutGoing.publish(filename, "record");
I want to control the Brightness,Contrast,Saturation and Sharpness for the recorded flv file.
At present, I only can control the videodisplay object, but I can not able to control Camera.
Thanks very much!!
kimi
MSN: [email protected]

Can I change a Video object to to Camera object, If yes, How do??
nsOutGoing.attachCamera(video as Camera);// it does not work rightly
thanks

Export clips separately from multitrack edit bombing Audition 2015 CC

attaching a screencast. Everything is up to date.
Mac
Yosemite
latest everything.
This hasn't happened before.
Any help appreciated as I have LOTS to edit/export (and before explaining how I'm going about this wrong, trust me that I've tried many options. Doing it this way (soloing tracks in Audition to edit / batch process / level) is saving hours... or would be if I could save the tracks individually once they're edited. It's SUPPOSED to work per manuals/websites/help screens.
In the screencast I get an error message before it bombs.
That was new.
Last night, when this happened several dozen times, I never got the error message. #stepintherightdirection
Screencast of session

The screen capture wasn't a high enough resolution where I could read the crash report. Any chance you can send that to me? You can find it again by opening Applications > Utilities > Console.app then expose User Diagnostic Reports. You should see entries for each time Audition crashed - drag one of them into an email as an attachment and send it to [email protected] and I'll take a look.
I did just try it on my own system without any problems, and if it was working before then something else must be amiss. The crash report may give us the right clues to start troubleshooting.

Histogram and saturation in Photoshop

1. Photoshop histogram panel is the average of the color intensity of the selected areas and layers of color channel statistics mean?
2. In the Photoshop histogram panel do you mean the average of the brightness of the image luminance channel?
I represent the average value of the maximum to the average of brightness from 0 to 255?
3. To obtain the saturation current number of images should I use any method or menu or panel?
I would appreciate a response.
Mail: [email protected]

Not sure I follow all the details you mention.
Hope this helps:
Photoshop Help | Viewing histograms and pixel values

Email saturation bombing

Similar Messages

Maybe you are looking for